Tariff Concession Orders

SORTERS AND DETECTORS, OPTICAL

FORMATION SAMPLING MODULES, OIL AND/OR GAS WELL, whether OR not 
assembled, including ALL of the following:
  (a) probe;
  (b) filter;
  (c) pressure gauge;
  (d) sensors;
  (e) valves;
  (f) pistons;
  (g) flowlines

INSULATED GLASS SHEET PRODUCTION LINE, including ALL of the 
following:
  (a) feed conveyor; 
  (b) washing AND drying machine;
  (c) flat glass press AND gas filler; 
  (d) glass panel sealing robot;
  (e) outfeed conveyor

PHARMACEUTICAL MONITORING AND SECURING AND DISPENSING SYSTEM, 
whether OR not mobile, whether OR not assembled, including ALL 
of the following:
  (a) terminal;
  (b) barcode scanner;
  (c) drawers AND/OR system locked drawers;
  (d) biometric access control 
whether OR not including ANY one OR more of the following:
       (i) uninterruptable power supply;
      (ii) universal serial bus (USB) charging connection;
     (iii) thermal printer;
      (iv) support arm;
       (v) bins AND/OR boxes AND/OR pockets;
      (vi) keyboard

HOPPERS, including screw feeders, capacity NOT less than 5 
cubic metres and NOT greater than 50 cubic metres

PRESSES, BRIQUETTING

SELF RETRACTING LIFELINE, with OR without retrieval winch, 
including ALL of the following:
  (a) hooks AND/OR karabiners;
  (b) galvanised steel OR stainless steel OR webbing cable

BALLISTIC WASTE SEPARATORS, having ALL of the following:
  (a) screen paddles;
  (b) one OR more stages;
  (c) adjustable paddle angle NOT less than 10 degrees and NOT
      greater than 25 degrees

MACHINE FRAME AND/OR FILTERING EQUIPMENT WASHING SYSTEM, 
including ALL of the following:
  (a) fixed AND rotating water spraying nozzles;
  (b) pumps;
  (c) washing chambers

MARINE RISER JOINTS, including ALL of the following:
  (a) riser pipes;
  (b) coupling boxes AND pins;
  (c) choke AND kill lines;
  (d) auxiliary lines;
  (e) line support brackets

REEL DRIVE SYSTEM, VESSEL MOUNTABLE, including BOTH of the 
following:
  (a) hydraulically driven horizontal drive unit;  
  (b) hydraulic power unit

STABILISER SLEEVES, BOTTOM HOLE ASSEMBLY, OIL AND/OR GAS WELL, 
threaded, including spiral blades

GRAVIMETRIC DOSING AND MIXING MACHINES, INJECTION MOULDING, 
programmable logic controlled, having BOTH of the following:
  (a) proportioned AND mixed throughput NOT less than 60 kg/hr 
      and NOT greater than 2 500 kg/hr; 
  (b) fixed AND/OR removable hoppers

DEHUMIDIFIERS, absorbent rotor, programmable logic controlled, 
having BOTH of the following:
  (a) airflow rate capacity exceeding 800 cu m/h and NOT 
      exceeding 3 000 cu m/h;
  (b) dewpoint NOT less than minus 10 degrees Celsius

MAGNETIC SEPARATOR MACHINES, eddy current, having ALL of the 
following:
  (a) supporting framework;
  (b) vibrating feeders;
  (c) electrical controls;
  (d) magnetic drum;
  (e) conveyors;
  (f) hoppers

CABINETS, CYANOACRYLATE FUMING

PRESSURISED CHAMBERS, CEMENT CURING, whether OR not assembled, 
including ALL of the following:
  (a) programmable temperature controller;
  (b) pressure gauges;
  (c) pump;
  (d) pressure relief valve

WASTE RECYCLING PLANT, having ALL of the following:
  (a) conveyors;
  (b) hoppers;
  (c) shredders;
  (e) hammer mill;
  (f) vibrating feeders;
  (g) screens;
  (h) control boards

ROUNDING RINGS, POLYETHYLENE AND/OR POLYPROPYLENE PIPE, 
hydraulic, having ALL of the following:
  (a) rounding capacity diameter NOT less than 315 mm and NOT
      greater than 1 200 mm;
  (b) pump lever;
  (c) hoisting chain

SQUEEZING TOOLS, POLYETHYLENE PIPE, hydraulic, galvanized 
steel, having squeeze off capacity NOT less than 63 mm and NOT 
greater than 200 mm

VENTILATORS, HEAT RECOVERY, whether OR not assembled, wall 
AND/OR window mounted, including ALL of the 
following:
  (a) fans;
  (b) motors;
  (c) ceramic heat exchangers;
  (d) filters,
with OR without ANY of the following:
     (i) controllers;
    (ii) humidity AND/OR temperature AND/OR CO2 sensors;
   (iii) grilles AND/OR panels

ANCHOR LATCH, OIL AND/OR GAS WELL, whether OR not assembled, 
including BOTH of the following:
  (a) body;
  (b) latch;
with OR without one OR more of the following:
    (i) polished bore receptacle;
   (ii) seals;
  (iii) spacers;
   (iv) shear screws;
    (v) shear rings

ASSEMBLIES, SEAL LATCH, OIL AND/OR GAS WELL, whether OR not 
assembled, including ALL of the following:
  (a) mandrel;
  (b) collet;
  (c) shear screws

METAL BAR AND WIRE PULLING AND LOOPING MACHINES

CRAWLER UNDERCARRIAGES AND SUPERSTRUCTURES, MOBILE STACKING 
BRIDGE OR RADIAL STACKER, programmable logic controlled, GPS 
guided, having ALL of the following:
  (a) crawler length NOT less than 8 m;
  (b) crawler pad width NOT less than 1.8 m;
  (c) crawler self-correcting leveller

PRESSURE CAPS, HORIZONTAL SUBSEA PIPELINE CONNECTION

SCRUBBERS AND DRYERS, FLOOR, battery powered, having a weight 
NOT greater than 30 kg

PIPE GRIPPERS, INTERNAL CYLINDER ENGAGEMENT, hydraulically 
powered, with OR without EITHER of the following:
  (a) power pack AND electric motor driven pump;
  (b) hose reel

TORQUE ANCHORS, OIL AND GAS WELL TUBING, downhole

LABORATORY TEST TUBE SORTING MACHINES, having ALL of the 
following:
  (a) sorting speed NOT greater than 1 200 test tubes per hour;
  (b) test tube de-capping AND re-capping module;
  (c) barcode reader AND camera;
  (d) loading platform;
  (e) sorting module

MARINE RISER JOINTS, including ALL of the following:
  (a) riser pipes;
  (b) buoyancy modules;
  (c) coupling boxes AND pins;
  (d) choke AND kill lines;
  (e) auxiliary lines;
  (f) line support brackets

TIE-IN AND CONNECTION SYSTEM, SUBSEA, OIL AND/OR GAS, remotely 
operated vehicle, with OR without ANY of the following:
  (a) connection cradles;
  (b) base plates;
  (c) bumper frame

WASHING AND DISINFECTING MACHINES, LABORATORY OR MEDICAL

CONFECTIONERY DISPENSERS, table top, plastic, having ANY of the 
following:
  (a) confectionery;
  (b) hand operation;
  (c) coin operation;
  (d) motion activated

CLAMPS AND INSTALLATION TOOLS, PIPELINE REPAIR, SUBSEA

WIRELINE LOGGING SYSTEM, OFFSHORE OIL AND/OR GAS WELL, whether 
OR not assembled, including ALL of the following:
  (a) power pack unit;
  (b) winch unit;
  (c) instrument cabin having acquisition instrumentation

PAINT APPLICATOR MACHINES, WOOD AND/OR TIMBER, having ALL of 
the following:
  (a) painting capacity NOT greater than 9 000 m/ph;
  (b) machine weight NOT greater than 700 kg;
  (c) rotating brushes;
  (d) sprayers

SLIPS, OIL AND GAS WELL, hydraulic, with OR without ANY of 
the following:
  (a) insert carriers;
  (b) insert bowls;
  (c) carrier blocks

ADHESIVE APPLICATORS, multi-roller, having ALL of the following:
  (a) hot melt tank AND reservoir;
  (b) vacuum fed melt unit;
  (c) heated adhesive application roller;
  (d) inter-changeable transport carts;
  (e) operator control AND interface panel;
  (f) adjustable line speed NOT less than 10 m/min and NOT 
      greater than 32 m/min

LATCHING AND/OR RETRIEVAL TOOL, DOWNHOLE, OIL AND/OR GAS WELL, 
hydraulic release, whether OR not assembled

TUBING HANGERS, OIL AND/OR GAS WELL, complying with American 
Petroleum Institute Specification 6A (API 6A), having an outer 
diameter NOT less than 11 cm and NOT greater than 51 cm

WASTE SEPARATORS, transportable, having ALL of the following:
  (a) radial fan with a power output NOT less than 30 kW;
  (b) separator capacity NOT greater than 180 m3/h;
  (c) feeding conveyor belt speed of 1.5 m/s

RUNNING TOOLS, MARINE RISER, OFFSHORE OIL AND GAS RIG, hydraulic

PRESSURE COMPENSATORS, OIL AND/OR GAS WELL, downhole, whether 
OR not assembled, including ALL of the following:
  (a) valves;
  (b) pistons;
  (c) seals;
  (d) springs;
  (e) housings;
  (f) connectors;
  (g) reservoirs;
  (h) shock absorbers

PLASTIC BOTTLE ORIENTATION MACHINES, having ALL of the following:
  (a) production speed of NOT greater than 13 800 bottles per 
      hour;
  (b) bottle size NOT greater than 1 litre;
  (c) air driven conveyor

RESERVOIR FLUID SAMPLING TOOLS, DOWNHOLE, single phase, 
controlled displacement, whether OR not assembled

BLANKING PLUGS, DOWNHOLE FORMATION PRESSURE, OIL AND/OR GAS 
WELL, including sealing AND/OR pressure equalising apparatus, 
whether OR not assembled

MAKE-UP AND/OR BREAK-OUT MACHINES, THREADED JOINT CONNECTION, 
OIL AND/OR GAS WELL, hydraulic, whether OR not assembled, 
including ALL of the following:
  (a) fixed hinged headstock chuck;
  (b) travelling tailstock chuck;
  (c) electric powered hydraulic control console;
  (d) operating pressure NOT less than 200 bar and NOT greater 
      than 240 bar;
  (e) bed length NOT less than 3.75 metres and NOT greater than 
      8.25 metres

PLASMA SURFACE TREATMENT MACHINES, atmospheric OR vacuum 
operated, including ALL of the following:
  (a) high frequency generator OR magnetron;
  (b) control panel,
including ANY of the following:
        (i) oxygen OR air surface activator;
       (ii) surface cleaner;
      (iii) surface etcher;
       (iv) surface coater

HANDLE APPLICATION MACHINES, PAPER TOWEL BUNDLES AND/OR TOILET 
ROLLS BUNDLES

GLASS LAMINATING LINES, having ALL of the following:
  (a) washing station;
  (b) conveyors;
  (c) suction cup glass sheet transfer station;
  (d) polyvinyl butyral(PVB) unwinder;
  (e) heating tunnel;
  (f) nip roller;
  (g) tilting table AND/OR conveyor

COLLET SHIFTING MECHANICAL TOOLS, PIPE SLEEVE, OIL AND/OR GAS 
WELL, bi-directional

WASTE DENSITY SEPARATORS, RECYCLING PLANT, having ALL of the 
following:
  (a) electric control panel;
  (b) collection AND stockpile conveyors;
  (c) separator drum;
  (d) diesel electric generator

DRINKING GLASSWARE DRYING AND POLISHING MACHINES, incorporating 
microfibre brushes

FOODSTUFF PUSHING AND LOADING MACHINES, volumetrically 
controlled, double AND/OR valve piston operated

ANCHOR AND SEAL TOOLS, LANDING NIPPLE, OIL AND/OR GAS WELL, 
retrievable, whether OR not assembled

ROOF SUPPORT MACHINES, UNDERGROUND MINING, self-propelled, 
crawler mounted

SETTING AND/OR RUNNING TOOLS, CEMENT RETAINER AND/OR BRIDGE 
PLUG, OIL AND GAS WELL, mechanical, whether OR not assembled

LINEAR ACTUATOR TOOLS, DOWNHOLE, OIL AND/OR GAS WELL, whether OR 
not assembled, including ALL of the following:
  (a) linear actuator module;
  (b) anchor module;
  (c) monitoring AND/OR measuring instruments

BOOMS, OIL AND/OR GAS BURNER, whether OR not assembled, 
including ALL of the following:
  (a) NOT less than two structure sections;
  (b) piping AND/OR cables;
  (c) gas flare;
  (d) rotating base plate

GARMENT FOLDING AND STACKING MACHINES, programmable logic 
controlled, having conveyor OR manual feed, with OR without 
sorters

CHEMICAL DOSING SYSTEM, containerised, including ALL of 
the following:
  (a) pumps;
  (b) tanks;
  (c) sensors AND/OR probes;
  (d) meters;
  (e) control module;
  (f) air conditioning modules;
  (g) piping;
  (h) valves;
  (i) filters

DOSING AND BLENDING MACHINES, gravimetric

LOCKS, RAM, BLOW OUT PREVENTER, OIL AND GAS WELL

CLEAN IN PLACE SYSTEM, programmable logic controlled, including 
ALL of the following: 
  (a) tanks having a capacity NOT greater than 2 500 litres;
  (b) probes;
  (c) valves;
  (d) pumps;
  (e) piping;
  (f) switches;
  (g) heat exchanger

INSTALLATION AND RETRIEVAL TOOLS, OIL AND GAS WELL, including 
ALL of the following:
  (a) main base frame;
  (b) top mandrel;
  (c) adaptor ring;
  (d) guide arms;
  (e) chains

GROCERY CRATE STACKABLE ARM OPENING MACHINES, with OR without  
conveyor

RIGS, ROCK DRILLING AND CABLE BOLTING, self-propelled, 
incorporating a cement handling module

ACCESSORIES, DOWNHOLE SETTING AND/OR RETREIVING TOOL, being 
tubing OR borehole anchor size adjusters, whether OR not 
assembled

BRIDGE PLUGS, OIL AND/OR GAS WELL STIMULATION, DOWNHOLE, flow 
through, drillable, having a pressure rating NOT less than 
45 000 kPa

SWIVEL HEADS, DOWNHOLE TRACTOR, whether OR not assembled, 
including ALL of the following:
  (a) pressure compensation system;
  (b) rotating contact assembly;
  (c) electrical connectors;
  (d) operating pressure rating NOT less than 1 350 bar

TRACTORS, DOWNHOLE WIRELINE, OIL AND/OR GAS WELL, modular, bi-
directional, whether OR not assembled,  having NOT less than  
2 drive configuration and NOT greater than 8 drive configuration

GUIDE SHOES, OIL AND/OR GAS WELL, self-aligning

FORMATION SAMPLING MODULES, having ALL of the following:
  (a) probe;
  (b) pump out module;
  (c) sample carrier module;
  (d) sample carriers;
  (e) isolation valve

COLLET CONNECTORS, OIL OR GAS WELL, SUB SEA, hydraulic, having 
BOTH of the following:
  (a) inlays on sealing surfaces;
  (b) studded OR flanged OR clamped tops

LAUNCHERS AND/OR RECEIVERS, PIPE CLEANING, INSPECTING AND/OR 
UNBLOCKING TOOL, SUBSEA

CEMENTING HEAD SYSTEM, SUBSEA OIL AND GAS WELL, including ALL of 
the following:
  (a) surface to well plug launcher;
  (b) subsea plug releaser tool;
  (c) plugs

SUBSEA CONNECTION TOOLS, being ANY of the following:
   (a) pipe cleaning tools, including ALL of the following:
           (i) buoyancy blocks;
          (ii) cleaning pads;
         (iii) steel frame;
          (iv) hydraulic seals AND pipes;  
   (b) pipe seal replacement tools,  including ALL of the
       following:
           (i) buoyancy blocks;
          (ii) seal carrier;
         (iii) steel frame;
          (iv) hydraulic seals AND pipes,   
  (c) stroking pipe connection tools, including ALL of the
      following:
           (i) steel frame;
          (ii) hydraulic cylinder rams;
         (iii) hydraulic seals AND pipes
  (d) cap OR clamp replacement tools, including ALL of the
      following:
           (i) steel frame;
          (ii) hydraulic seals AND pipes;
         (iii) hydraulic cylinder rams

PACKER RELEASING AND/OR SETTING ISOLATION MODULE, DOWNHOLE, non-
pressure sensitive, whether OR nor assembled, including BOTH of 
the following:
  (a) release mechanism;
  (b) isolated setting pistons

TOOLS, HORIZONTAL CONNECTION SYSTEM, SUBSEA, being seal 
retrieval AND/OR seal replacement tools

TOOLS, HORIZONTAL CONNECTION SYSTEM, SUBSEA, hydraulic, being 
EITHER of the following:
  (a) hub cleaners having abrasive pads;
  (b) connector cleaners having abrasive pads

LOADERS, ARTICULATED AND/OR FIXED AND/OR TELESCOPIC CHASSIS, 
front-end, 4 wheel-drive, without attachments

SHAKING INCUBATORS, LABORATORY BIOLOGICAL GROWTH, multi point 
shaker drive, including ALL of the following:
  (a) temperature AND shaking controller;
  (b) incubation chamber;
  (c) circulation fan;
  (d) biological growth container shaker

PACKER SETTING AND RUNNING TOOL, DOWNHOLE, dual piston, 
hydraulic, whether OR not assembled

WASHERS, MECHANICAL PARTS, including ALL of the following:
  (a) immersion tank;
  (b) hermetical lid;
  (a) air pump;
  (b) distribution pump;
  (c) immersion heater

CONNECTORS, CHOKE AND KILL LINE TO BLOWOUT PREVENTER, OIL AND 
GAS WELL, hydraulically activated

TRAILER AND/OR CARAVAN MOVING SYSTEM, remotely controlled, 
chassis mounted, 12 V DC, including ALL of the following:
  (a) two OR four motors;
  (b) mounting hardware;
  (c) control module;
  (d) working load capacity NOT less than 2 250 kg and NOT
      greater than 3 500 kg

CANISTERS, LUBRICATION, incorporating a piston AND driveshaft

KITS, VEHICLE STABILISATION, including ALL of the following:
  (a) telescopic stabiliser struts;
  (b) textile straps;
  (c) finger hooks;
  (d) adjustable wedges;
  (e) hook blades;
  (f) carry bags

SHREDDING MACHINES, SCRAP MATERIALS, rotary

FOOD WASTE PULPERS, including ALL of the following:
  (a) electro-mechanical controls;
  (b) grinding wheel with tungsten carbide cutters;
  (c) dewatering press incorporating water self-flushing system;
  (d) single point drain connection;
  (e) water circulation pumps;
  (f) waste volume reduction up to 85%;
  (g) grinder motor power capacity NOT greater than 6.6 kW

LUBRICATORS, GREASE, RAILWAY TRACK, having ALL of the 
following:
  (a) digital control box;
  (b) double gear pump with electric motor;
  (c) wheel sensor;
  (d) tank;
  (e) rail wiping bars and rail clamp

INCUBATORS, LABORATORY, CELL CULTIVATION, having ALL of the 
following:
  (a) temperature range NOT less than minus 20 degrees C and
      NOT greater than 65 degrees C;
  (b) incubation chamber volume NOT greater than 200 L;
  (c) touch controller

PACKAGING SEPARATORS, including ALL of the following:
  (a) tubular separation chamber with adjustable paddles; 
  (b) access doors;
  (c) separator screens;
  (d) liquid addition points;
  (e) electrical controls AND starter panel

TOOLS, SETTING OR RETRIEVING, DOWNHOLE, having two OR more of 
ANY of the following:
  (a) hydraulic power module;
  (b) anchors;
  (c) plug setting module

STABILISERS, BOTTOM HOLE ASSEMBLY, OIL AND/OR GAS WELL, mandrel, 
whether OR not assembled

TAKE-UP MACHINES, CABLE, having a drum diameter NOT greater than 
2 400 mm

CUTTERS, SUBSEA, WIRELINE AND/OR COILED TUBING

CENTRIFUGES, BODY TISSUE AND/OR BODY FLUID, programmable logic 
controlled, including ALL of the following:
  (a) centrifuge;
  (b) raw material and sample handling robotic arms;
  (c) LCD screen

PRESSURE CAPS, VERTICAL CONNECTION SYSTEM, SUBSEA

RUNNING AND RETRIEVAL TOOLS, VERTICAL CONNECTION SYSTEM, SUBSEA, 
having BOTH of the following:
  (a) tool envelope diameter NOT less than 1 412 mm;
  (b) weight NOT less than 4 536 kg

PRESSURE CONTROL EQUIPMENT STRINGS, OIL AND/OR GAS WELL, 
including NOT less than ANY 3 of the following categories:
  (a) frame;
  (b) injection control;
  (c) tool catcher;
  (d) lubricator section;
  (e) clamps;
  (f) lifting beam;
  (g) tool trap;
  (h) pumps;
  (i) valves;
  (j) wellhead adaptor flange;
  (k) slings;
  (l) unions;
  (m) hoses;
  (n) seals;
  (o) cutters;
  (p) cages;
  (q) cable cutter sub;
  (r) pump-in sub;
  (s) test sub

CLAMPING AND TENSIONING DEVICES, CONVEYOR BELT MANUFACTURING LINE

COMPLETION DEFLECTORS, MULTILATERAL OIL AND/OR GAS WELL, downhole

CEMENTING HEADS, OIL AND GAS WELL, including ALL of the 
following:
  (a) safety valves; 
  (b) plug launcher; 
  (c) swivel assembly

OIL SPILL CONTAINMENT BOOMS, having BOTH of the following:
  (a) constant ambient inflation boom air pressure controls;
  (b) continuous sea wave action boom air re-inflator

ASSEMBLIES, PIPE AND TUBE, OIL AND GAS WELL, being ALL of the 
following:
  (a) Y shaped branched steel tubes;
  (b) threaded bore well connection steel pipes;
  (c) steel pipes, having variable aperture sizes

GAS MIXING MACHINES, including ALL of the following:
  (a) gas mixing cabinet;
  (b) gas pressure controllers;
  (c) gas filters

STREET AND PAVEMENT SWEEPERS, suction operated, self propelled, 
having ALL of the following:
  (a) sweeping width NOT greater than 2 050 mm;
  (b) dirt hopper capacity NOT greater than 1 m3;
  (c) transport speed NOT greater than 40 km/h;
  (d) outer turning radius NOT greater than 6 800 mm;
  (e) width NOT greater than 1 200 mm;
  (f) height NOT greater than 2 180 mm

TEST AND/OR HANDLING CAPS, OIL AND/OR GAS WELL EQUIPMENT

TILLERS, SNOW GROOMER

HYDRAULIC PRESSURE AND FLOW CONTROL MACHINES, OIL AND GAS 
EQUIPMENT, whether OR not assembled, including ALL of the 
following:
  (a) pressure gauges;
  (b) air driven pumps;
  (c) hand pumps;
  (d) accumulators

SUBSEA CONTROL MODULES, OIL AND GAS WELL, having ALL of the 
following:
  (a) mandrel assembly;
  (b) accumulators;
  (c) subsea electronics module;
  (d) hydraulic valve;
  (e) manifold pod

BRASS PUSH-FIT PIPE FITTINGS ASSEMBLY MACHINES

PIPELINE PIG SIGNALLERS, intrusive, bi-directional

VACUUM TOILETS, electronic

PRESSES, ISOSTATIC

CASING HANGERS, OIL AND/OR GAS WELL

MAGNETIC DRUMS, FERROUS MATERIAL REMOVING

COATING AND LAMINATING MACHINES, solventless, having BOTH of the 
following:
  (a) coating width NOT less than 1 600 mm;
  (b) lamination material thickness capacity NOT greater
      than 150 mm

KITS, WEDGE, including ALL of the following:
  (a) wedge;
  (b) stay plates;
  (c) wedge clip;
  (d) lubricant;
  (e) installation instructions

BIOREACTOR, CELL CULTURE

LAMINATING MACHINES, FLAKEBOARD AND/OR MEDIUM DENSITY 
FIBREBOARD, having a working width NOT less than 300 mm and NOT 
greater than 2 600 mm

BRIDGE PLUGS, OIL AND GAS WELL, downhole, retrievable, having a 
pressure rating NOT less than 15 500 kPa

HYDROSTATIC SETTING TOOLS, OIL AND GAS WELL, downhole, having a 
maximum working pressure NOT less than 67 000 kPa

HOSE REELS, OIL AND GAS WELL, sub-sea, offshore OR onshore, 
comprising BOTH of the following:
  (a) pneumatically operated reel;
  (b) multi modal cradle conforming to Det Norske Veritas
      2.7-1(DNV 2.7-1)

HANDLERS, MATERIAL, MOBILE AND/OR CRAWLER AND/OR PEDESTAL 
MOUNTED, without attachments, having ALL of the following:
  (a) diesel engine or electric drive;
  (b) action radius NOT less than 7 m;
  (c) operating weight NOT less than 18 t;
  (d) boom length (including loading stick) NOT less than 9 m;
  (e) cabin

HORSE WALKER EXERCISE AND TRAINING MACHINES, oval track

SELECTIVE LASER MELTING (SLM) PROCESS MACHINES

ACCUMULATORS, HYDRAULIC PISTON, complying with Australian 
Standard AS 1210 Supp 1-1990, having ALL of the following:
  (a) working pressure NOT less than 24 MPa;
  (b) length NOT less than 2 000 mm;
  (c) diameter NOT less than 245 mm

COLLARS, STAGE CEMENTING, OIL AND GAS WELL CASING

LADDERS, FALL PROTECTIVE, incorporating fixed safety rails and 
removable runners

SUBSEA CONTROL MODULES, OIL AND GAS PRODUCTION, having a weight 
NOT less than 1 500 kg

DISPENSERS, MIXING AND METERING, GLASS SEALANT

LABORATORY TEST TUBE SORTING AND PROCESSING MACHINES, having ALL 
of the following:
  (a) sorting speed NOT less than 750 test tubes per hour and 
      NOT greater than 1 250 test tubes per hour;
  (b) test tube inspection modules;
  (c) sample loading draws;
  (d) bar code readers;
  (e) centrifuging modules;
  (f) volume measurers

CLEANERS, FISH FARMING NET, self-propelled, submergible

MOORING HOOKS, QUICK RELEASE

MAKE-UP AND BREAK-OUT MACHINES, hydraulically powered

DEHUMIDIFIERS, having EITHER of the following:
  (a) maximum water extraction rate NOT less than 15 L  per 24 
      hours at 30 degrees Celsius with a relative humidity
      of 60%;
  (b) defroster

DRAINAGE SYSTEM, SCRAP MOTOR VEHICLE, vacuum pump operation, 
with or without ANY of the following:
  (a) fuel tank drilling machines;
  (b) shock absorber drilling machines;
  (c) gearbox drilling machines;
  (d) catalytic converter cutting machines

RUNNING TOOLS, CHRISTMAS TREE, SUBSEA

SECONDARY RELEASE TOOLS, CHRISTMAS TREE, SUBSEA

CARGO HOOK LIFTING CAROUSELS, HELICOPTER, having a drop release 
controller

COMPONENTS, WORKOVER SYSTEM, SUBSEA OIL AND GAS WELL, being 
EITHER of the following:
  (a) tubing hanger overshot tools;
  (b) tubing hanger running tools

TUBING DISCONNECTS, OIL AND GAS WELL, two part, with or without 
EITHER of the following:
  (a) wiper dart release;
  (b) steel ball release

PLUGS, ISOLATION, TUBING, OIL AND GAS WELL

LINER HANGERS, EXPANDABLE, OIL AND GAS EXPLORATION AND PRODUCTION

ROOF SUPPORT MACHINES, LONG WALL MINING, hydraulic

ELECTRICAL CABLE TRAVERSING PAY OFF MACHINES

WASHING PRESSES, consisting of ALL of the following:
  (a) inlet hoppers;
  (b) conveyors;
  (c) washing and press screws;
  (d) press frames;
  (e) bearing cages;
  (f) motors;
  (g) drain pans;
  (h) wash water headers

SECURITY ACCESS GATES, PEDESTRIAN, electronically controlled,
230 V

INSULATED GLASS PRODUCTION LINE, comprising ALL of the 
following:
  (a) washing machine;
  (b) tilt and/or transfer tables;
  (c) assembling press

MOTOR VEHICLE OPERATION SYSTEM, including ALL of the following:
  (a) steering and/or accelerator and/or brake and/or 
      transmission controls;
  (b) secondary controls, including horn
      and/or indicators and/or hazard warning lights and/or
      wipers and/or high and low beam;   
  (c) vehicle to system interfaces;
  (d) central processing units;
  (e) information displays;
  (f) electric motors

INSULATED GLASS SHEET PRODUCTION LINE, including ALL of 
the following:
  (a) inlet station;
  (b) washing and drying station;
  (c) frame mounting station;
  (d) assembly and press station;
  (e) storing stations

DESICCANT FILLING MACHINES, BENT SPACER FRAMES, INSULATED GLASS

INSULATED GLASS SHEET PRODUCTION LINE, comprising ALL of the 
following:
  (a) washing and drying station;
  (b) frame mounting station;
  (c) gas filling press;
  (d) butyl coating machine;
  (e) spacer feed-in machine;
  (f) vacuum suction bridge

TRACTORS, WIRELINE, OIL AND GAS EXPLORATION, conveyancing, 
downhole, gauge size NOT less than 5 cm but NOT greater than  
26 cm

COOLERS AND/OR WARMERS, FOOD AND BEVERAGE, comprising ALL of the
 following:
   (a) insulated;
   (b) 12 volt DC AND/OR dual voltage;
   (c) carry handles;
   (d) volume NOT greater than 34 litres

INSULATING GLASS LINE, programmable logic controlled, comprising 
ALL of the following:
  (a) loading stations;
  (b) transport stations;
  (c) inspection stations;
  (d) mounting stations;
  (e) washing and drying stations;
  (f) sealing robots;
  (g) robot super spacers;
  (h) presses;
  (i) measurers

MAGNETIC PARTICLE PROCESSING MACHINES, programmable logic 
controlled, with or without ANY of the following:
  (a) magnet heads;
  (b) plates;
  (c) tip combs

CEMENT HEADS, OIL AND GAS WELL, single OR double plug, 
comprising ALL of the following:
  (a) valves;
  (b) manifold;
  (c) seals;
  (d) pump port;
  (e) quick coupler

MACHINES, SWEEPING, PEDESTRIAN PUSHED AND CONTROLLED, having 
BOTH of the following:
  (a) battery powered motor driven brushes and/or manual drives;
  (b) removable hopper

TRACTORS, CRAWLER, PIPELINE, comprising ALL of the following:
  (a) umbilical winches;
  (b) controllers;
  (c) cameras

RAIL CLAMPS, BRAKE, hydraulic

HORNS, AIR, having 12 OR 24 volt air compressors

DEBRIS CAPS, SUBSEA, OIL AND GAS WELL

SYSTEMS, WORKOVER CONTROL, SUBSEA, OIL AND GAS WELL, electronic 
controlled, comprising ALL of the following:
  (a) hydraulic power units;
  (b) stabplates; 
  (c) umbilicals;
  (d) umbilical sheaves;
  (e) umbilical workover reels

CONTROLLERS, WELLHEAD PRESSURE, OIL OR GAS

PRESSES, EYELET, pneumatic

TOOLS, RUNNING AND RETRIEVAL, SUBSEA, universal

MILLING MACHINES, incorporating three dimensional scanners, with 
or without scanning sensor

PHARMACEUTICAL DISPENSING MACHINES

MANIPULATORS, WELDING HEAD, COLUMN AND BOOM

WASHING MACHINES, TROLLEYS AND/OR CARTS, FOOD AND/OR CATERING

DISPENSING MACHINES, SEMICONDUCTOR FLUID AND/OR ADHESIVE AND/OR 
PROTECTIVE COATING LIQUID AND/OR PASTE, programmable logic 
controlled

AERATORS, SURFACE, WASTEWATER TREATMENT

PRESSES, HYDRAULIC, WOOD AND/OR PAPER

REGULATORS, WINDOW

COILERS, CORRUGATED PIPE

AERATORS, TURBINE, submerged

HANDLERS, MATERIAL, having ALL of the following:
 (a) diesel engine output NOT less than 95 kW and NOT greater 
     than 210 kW;
 (b) action radius NOT less than 7 metres and NOT greater than
     20 metres;
 (c) operating weight NOT less than 20 tonnes and NOT
     greater than 65 tonnes;
 (d) compact boom NOT greater than 12 metres;
 (e) loading stick NOT less than 2 metres and NOT greater than
     10 metres;
 (f) elevated cabin;
 (g) 4-point outriggers;
 (h) solid rubber tyres

DEDUSTERS, TABLET AND/OR CAPSULE

WINDERS, WIRES AND/OR YARNS

GATES AND/OR BOOTHS, SECURITY, pedestrian, electric, 
incorporating at least one glass panel

PLATFORMS, VEHICLE LIFTING, comprising BOTH of the following:
   a) hydraulic lifts;
   b) hydraulic car body straighteners

SWEEPERS AND/OR CLEANERS AND/OR SCRUBBERS, motorised, ride on 
AND/OR walk behind

PLANT, PELLET, comprising ALL of the following: 
   (a) valves;                                   
   (b) blowers;                                  
   (c) conveyors;                                
   (d) cyclones;                                 
   (e) blenders;                                 
   (f) tanks;                                    
   (g) steam drums;                              
   (h) palletisers;                              
   (i) hoppers;                                  
   (j) filters

CUTTERS AND/OR CRUSHERS, DEMOLITION, boom mounted

REEFERS AND/OR FURLERS, YACHT, manual

REEFERS AND/OR FURLERS, YACHT, hydraulic AND/OR electric

FLOWLINE CONNECTION REMOTE OPERATED TOOLS, SUB SEA, having ANY 
of the following:      
 (a) recovery frames;                                            
 (b) docking skids;                                              
 (c) control containers;                                         
 (d) workshop cabins

WASHERS AND DRYERS, PRESSED METALS AND/OR PARTS AND/OR PANELS

PAINT PRIMING AND COATING LINES, TIMBER LINEAR PROFILE SHAPES, 
plc, comprising ALL of the following:
  (a) extruder primer coaters;
  (b) conveyors;
  (c) spray painters;
  (d) drying ovens

DESCENT CONTROLLERS, FALL PROTECTION

WASHERS AND DRYERS, FLAT GLASS, with or without load and/or 
unload conveyors

COMPENSATORS, HEAVE AND/OR MOTION

WASTE SEPARATORS, single stream

RAKES, LEACHING PLANT, THICKENER

BOTTLE CAP LINERS

SEPARATORS, metal

BRAKES, DISC, INDUSTRIAL, having a braking force of NOT less 
than 9 500 N per caliper

PHARMACEUTICAL PLANT, capsule encapsulators and/or capsule 
sorters

DRYERS AND POLISHERS, CUTLERY, incorporating a UV lamp

SORTERS, RECYCLABLE PACKAGING WASTE, optical, comprising BOTH of 
the following:
  (a) near infrared detector;
  (b) air ejector

TUMBLE POLISHERS, PHARMACEUTICAL CAPSULE

PULLERS, hydraulic, whether or not in sets

NUTRUNNERS, having a DC electric motor

STRINGING MACHINES, tennis racquet, squash racquet or badminton
 racquet

SWEEPING MACHINES, self propelled, pedestrian controlled

CRUSHING MACHINES, ICE

PROCESSING MACHINES, WIRE AND CABLE, MEASURE, CUT AND STRIP, having
 at least one of the following:
   (a) crimper;
   (b) sealer and/or sleeve inserter;
   (c) solder;
   (d) flux;
   (e) twister;
   (f) marker

CHLORINE DIOXIDE GENERATOR

DEMOLITION MACHINES, HAMMER, wheel OR track mounted, remote
 controlled

LACING OR JOINING MACHINES, CONVEYOR BELTING, being EITHER pneumatic
 OR hand cranked OR manual hammer operation

PIPETTES, LABORATORY, multi channel, hand held, adjustable volume,
 graduated in microlitre quantities

LUBRICATORS, ROLLER AND BALL BEARING

DEHUMIDIFIER, ROTATING WHEEL, DRY DESSICANT TYPE, having
 continuous duty and simultaneous regeneration of the drying rotor

DISPENSING MACHINES, PAINT TINT, COMPUTER CONTROLLED, capable of
 storing up to 32 tint containers

CABLE TENSIONERS, marine

SPIRAL PLATERS, comprising ALL of the following:
   (a) pipetter;
   (b) rotating turntable;
   (c) electronic settings

AIR HORNS, compressed air, with rechargeable cannister

ACCUMULATORS, piston type, complying with AS 1210 for working
 pressure of 21 mPa or 25 mPa capable of working at a compression
 ratio of above 6:1 between maximum and minimum pressure

TENSIONING MACHINES, being machines that stretch studs or bolts by
 the application of hydraulic power

LOADERS, skid steer, having a rated operating capacity of 350 kg
 or greater, but NOT including loaders imported with buckets, backhoe
 loader sections or other attachments

SWEEPING MACHINES, ride on, petrol, diesel or electric powered
 having BOTH of the following:
   (a) a sweeping path of in between 120 cm and 160 cm;
   (b) a hopper capacity of 0.25 cu m or greater but NOT exceeding
       0.65 cu m

ACCUMULATORS, BLADDER, having a capacity of between 0.5L to 54L
 inclusive and an operating pressure of 50 000 kPa and above
 conforming to AS 1210

RECORDERS, LASER BEAM, DIGITAL VERSATILE DISC (DVD)

FILM COATERS, PHARMACEUTICAL TABLET, computer controlled

BURNISHERS, pedestrian operated, self propelled, battery operated,
 units burnish at a speed of 2 000 rpm or greater

STERILIZATION SYSTEMS, MEDICAL INSTRUMENT, micro processor
 controlled, having ALL of the following:
   (a) controlled input of chemical sterilant;
   (b) audio/visual indication of cycle status;
   (c) diagnostic and process print-out

REMOTE CONTROL SYSTEMS, VEHICLE, WORK CLASS, UNDERWATER, having ANY
 of the the following:
   (a) free swimming remotely operated vehicle;
   (b) launch and recoverer;
   (c) surface controller, whether or not housed in a cabin;
   (d) workshop cabin;
   (e) tetherer

ARTICULATED LOADERS, 4 wheel drive, comprising ALL of the following:
   (a) operating weight greater than 4 000 kg;
   (b) engine flywheel power greater than 36 kW;
   (c) maximum dump clearance height NOT less than 2.3 m at 45
       degree dump angle;
 but NOT including:
   (a) underground mine loaders;
   (b) telescopic boom loaders

DAMPENERS, pulsation, NOT being gas or air systems dampeners.

LAMINATING MACHINES, plastic security and identification cards

TOILETS, CARAVAN OR MOTOR HOME, having a removable waste tank

BALING MACHINES, SOLID WASTE COMPACTING, TWIN RAM

STEAM GENERATING HUMIDIFIERS, electric, having an output of 1 kg/h
 OR greater but NOT exceeding 90 kg/h

FILLING MACHINE, CUSHION

REELING MACHINES, electrical cable, automatic despatch

MOUNTING PLATES, CLOSED CIRCUIT TELEVISION CAMERAS, motorised,
 remote control operated, pan and tilt OR scanner

WASHING MACHINE, FLEXIBLE SCOPE, having ALL of the following
 functions:
   (a) washing;
   (b) disinfecting by use of concentrated glutaraldehyde solution;
   (c) connection points to enable internal channels of flexible
       scopes to be separately irrigated;
   (d) leakage testing of flexible scopes;
   (e) sterile water rinse;
   (f) self disinfection of machine and self cleaning of water
       filter

LUBRICATORS, GREASE OR OIL, CENTRALISED, having ALL of the
 following:
   (a) single outlet;
   (b) reciprocating output pump;
   (c) reservoir

SWEEPERS, SELF PROPELLED, having BOTH of the following:
   (a) hopper capacity greater than 80 L;
   (b) cleaning path greater than 700 mm but less than 1 600 mm

TYRE CHANGERS, power operated

PUMP, breast, mains or battery powered, automatic operation
 with a physiologically natural sucking rhythm

DENTAL HANDPIECE LUBRICATING AND CLEANING MACHINES, PNEUMATIC

CLEANERS, HEAT EXCHANGER AND/OR CONDENSER TUBES, on-line,
 having ALL of the following:
   (a) NOT less than one strainer screen;
   (b) ball re-circulation pump;
   (c) ball collector

PARKING STATION MANAGEMENT SYSTEMS, comprising ALL of the following:
   (a) car park barriers;
   (b) parking entry and exit columns;
   (c) cashier stations;
   (d) payment machines;
   (e) door and gate openers;
   (f) central management computer

COATING AND LAMINATING MACHINE, solventless, with a coating width
 up to a maximum 1 200 mm

ACCESSORIES, PACKERS, OIL OR GAS WELL, downhole, being ANY of the
 following:
   (a) sealbore and millout extensions;
   (b) polished bore receptacles and seal stingers;
   (c) overshot tubing seal dividers;
   (d) seal stingers, including locators and guides;
   (e) catcher subs;
   (f) tubing safety joints;
   (g) tubing or casing patches;
   (h) tubing hangers;
   (i) landing nipple liner hangers;
   (j) casing nipples;
   (k) liner hangers

CYTOLOGY CELL COLLECTION PREPARATION INSTRUMENT, having ALL of the
 following:
   (a) integrated control;
   (b) liquid crystal display;
   (c) keyboard operation;
   (d) monolayer cell presentation

NEEDLES, inflating, basketball

LANE MAINTENANCE MACHINES, TENPIN BOWLING

BIRD SCARERS, LPG operated

SLURRY AND/OR LAGOON MIXERS, having a shaft length NOT less than
 5 metres

SLIDES, COIN OR TOKEN, PUSH PULL, minimum three coin OR token
 capacity, non-electrical

POSTFORMING MACHINES, computer controlled, having a power driven
 heated pressure bar

VENDORS, CONFECTIONERY

VEHICLES, EXPLOSIVE ORDNANCE DISPOSAL (EOD) OR IMPROVISED EXPLOSIVE
 DEVICE DISPOSAL (IEDD), battery operated, wireless remote OR fibre
 optic controlled, WHETHER or NOT having ANY of the following:
   (a) control console OR base station;
   (b) cameras;
   (c) firearms or disruptors;
   (d) water cannon;
   (e) x-ray apparatus;
   (f) magnetic clamps;
   (g) tearing hooks;
   (h) gripper jaws;
   (i) glass breakers;
   (j) cryogenic freezing

LOADERS, four-wheel drive, having ALL of the following
 characteristics:
   (a) engine power exceeding 250 kW;
   (b) width over standard tyres exceeding 3 350 mm;
   (c) bucket hinge pin height at maximum lift exceeding 4 450 mm,
 but NOT including ANY of the following:
   (a) loaders when imported with buckets;
   (b) buckets, dippers, sticks, grabs, shovels, blades or similar
       attachments when imported as initial spares or replacement
       parts;
   (c) pins, collets or brake drums, when imported as initial spares
       or replacement parts;
   (d) picks, adaptors, points or teeth and similar wear parts
       when imported as initial spares or replacement parts

ACCESSORIES, PACKER, OIL AND GAS WELL, being ANY of the following:
   (a) moulded seal;
   (b) crossover adaptor;
   (c) bore seal no-go locator;
   (d) moulded seal retaining ring;
 but NOT including accessories for inflatable grouting packers

SLITTING/REWINDING MACHINES, comprising ALL of the following:
   (a) rewinder;
   (b) unwinding station complete with soundproof cover and lifter;
   (c) core loader;
 capable of slitting rolls to a maximum width of 1 600 mm

BOLT TENSIONERS, hydraulic

WASHING AND/OR POLISHING MACHINES, VEHICLE, with OR without dryers
 but NOT including hand held machinery

ENCAPSULATING MACHINES, SOFT ELASTIC GELATIN CAPSULE

DRILLING AND BOLTING RIGS, ROCK, hydraulic, self propelled,
 having BOTH of the following:
   (a) drill steel support with rod changer;
   (b) minimum drilling capacity of 36 m

PLUGS, PRESSURE TEST, OIL AND GAS TUBING

BATHS, HYDROTHERAPY, having BOTH of the following:
   (a) adjustable height;
   (b) in-built control panel

SCRUBBING MACHINES, self propelled, single seat, ride on, having two
 (2) roller or disc brushes and one (1) rubber squeegee

AERATORS, AQUACULTURE, paddlewheel, having ALL of the following:
   (a) stainless steel OR HDPE vertical rotating paddlewheels;
   (b) horizontal floatation tubes;
   (c) bi-directional reducing gearbox with speed of 100 rpm;
   (d) motor power rating NOT greater than 1.5 kW

SCRUBBERS, FLOOR, having ALL of the following:
   (a) minimum cleaning path of 67 cm;
   (b) minimum solution tank capacity of 90 L;
   (c) minimum recovery tank capacity of 90 L;
   (d) liquid pick up via squeegee and vacuum fan

AERATORS, subsurface, incorporating EITHER a ceramic OR membrane
 diffuser

SECURITY GATES, PEDESTRIAN, 240 V, comprising BOTH of the
 following:
   (a) reverse action;
   (b) visual and audible alarm signals

DISPENSING MACHINES, ICE AND BEVERAGES, having BOTH of the
 following:
   (a) a paddle wheel to transport ice;
   (b) a cold plate to chill beverages

ACTUATORS, linear thermo-electric, push or pull types, having a
 nominal length of stroke NOT exceeding 12 mm

PIPETTES, LABORATORY, HAND HELD, fixed volume, quantity
 30 microlitres

SCRUBBING MACHINES, electric powered, pedestrian operated

SWEEPING MACHINES, self propelled, single seat, ride on, having ALL
 of the following:
   (a) maximum hopper capacity NOT exceeding 200 L;
   (b) maximum sweeping width with side brushes NOT exceeding 1.6 m;
   (c) maximum travelling speed NOT exceeding 16 kph;
   (d) incorporating one or more brushes

SHAVING MACHINES, ICE

WASHING MACHINES, VEHICLE, TUNNEL, having ALL of the following:
   (a) push button or electronic card reader operated;
   (b) electronic microprocessor control with fault monitor;
   (c) alignment aid;
   (d) electronic variable speed controlled conveyor;
   (e) conveyor chain fitted with frictionless sliding blocks;
   (f) chemical pre rinse;
   (g) foam wash;
   (h) rim spray;
   (i) electronically controlled wheel wash synchronised with
       conveyor speed;
   (j) short wash tunnel with linear roof and side brushes;
   (k) dry aid;
   (l) waxer;
   (m) contour following double dryer

CONVERSION KITS, power window, converting manual operation to power
 system, comprising ALL of the following:
   (a) 2 or 4 electric window mechanism;
   (b) 2 to 7 power window switches and/or switch mountings;
   (c) wiring harnesses;
   (d) 2 to 4 round caps to cover hole in door trim;
   (e) grommets and plastic tubes

GRIT REMOVERS

ARTICULATED LOADERS, bare, 4 wheel drive, comprising ALL of the
 following:
   (a) weight NOT less than 1 400 kg and NOT greater than
       3 400 kg;
   (b) engine power NOT less than 14.7 kW and NOT greater than
       43 kW;
   (c) hydraulic or hydrostatic drive

APPLICATING MACHINES, DRINKING STRAW, BEVERAGE CARTON

CRIMPING MACHINES, modular connector

DISPENSING MACHINES, LIQUID, fully automatic, capable of dispensing
 solder paste or viscous liquid epoxies to substrates, circuit
 boards and flexible circuits incorporating ALL of the following:
   (a) simultaneous micro processor control of the X, Y and Z axes of
       the robotic positioning system;
   (b) a rotary displacement valve;
   (c) a through conveyor to make the machine compatible to pick and
       place machines and the flow line production of printed circuit
       boards

DOWN HOLE CEMENTING EQUIPMENT, being EITHER of the following:
   (a) float shoes;
   (b) float collars

STENCIL AND SCREEN PRINTING MACHINES, SURFACE MOUNTED PRINTED
 CIRCUIT BOARD

PACKERS, OIL AND GAS WELL, but NOT including inflatable grouting
 packers

MICROPIPETTES, continuously adjustable, having a capacity of up to
 10 ml

INSTALLATION AND REMOVAL PLATFORMS, CONTAINER TWISTLOCK, stand-
alone OR crane mountable, programmable logic controlled

CROP PROTECTORS, with OR without tractor mounting brackets, 
including ALL of the following:
  (a) stainless steel nose cone;
  (b) parallelogram suspension;
  (c) vertical AND horizontal position adjusters;
  (d) deflector arms

SCRAPERS, SEWAGE OR WASTE WATER TREATMENT, with OR without 
sludge removal system, having ALL of the following:
  (a) scraper flights;
  (b) chains;
  (c) sprockets;
  (d) gear motor drives;
  (e) wear shoes;
  (f) rails;
  (g) head shafts;
  (h) collector chain tensioning device

SORTERS, BEVERAGE CONTAINER, including BOTH of the following:
  (a) sorters; 
  (b) conveyors,
with OR without EITHER of the following:
        (i) compactors;
       (ii) storage bins

CASTING TABLE AND/OR BED CLEANING MACHINES, PRE-CAST CONCRETE 
AUTOMATION PLANT, having ALL of the following: 
  (a) scraper;
  (b) rotating roll brush AND sidewards rotating round brush; 
  (c) dirt collection box

STRETCHING AND STAPLING CANVAS FRAMING MACHINES, pneumatic, 
including frame selection screen controls

ASSEMBLY PRESSES, DIE AND RING, programmable logic controlled, 
having ALL of the following:
  (a) hydraulic cylinders;
  (b) steel frame;
  (c) adjustable cradle

DUAL PIG PIPELINE CLEANING SYSTEM, including ALL of the 
following:
  (a) pig control detectors;
  (b) two-way switch;
  (c) two pig launching station;
  (d) two pig receiving station;
  (e) piston valves;
  (f) ball valves;
  (g) seat valves;
  (h) pipeline AND fittings;
  (i) pipeline diameter NOT less than 65 mm and NOT greater than 
      110 mm;
  (j) rinsing station

SHUTTERING CLEANERS, PRE-CAST CONCRETE AUTOMATION PLANT, having 
an automated through feed mechanism AND steel brushes

BURR AND/OR DUST REMOVAL MACHINES, TABLET AND/OR CAPSULE, METAL 
DETECTING

WASTE PROCESSING PLANT, AIR SEPARATION, having a drum input 
capacity NOT greater than 20 tonnes per hour, including ALL of 
the following:
  (a) air expansion chamber;
  (b) conveyors;
  (c) fans;
  (d) ducts;
  (e) filters

SUCTION CUP ANCHOR SYSTEM, VACUUM, consisting of ALL of the 
following:
  (a) vacuum control module;
  (b) suction anchors;
  (c) hoses AND adapters;
  (d) energy absorber;
  (e) tensioners AND turn buckles;
  (f) shuttles;
  (g) ropes AND cables

DOSING UNITS, programmable logic controlled, including BOTH of 
the following:
  (a) mixing tank;
  (b) storage tank

CRASH ATTENUATORS, IMPACT ENERGY ABSORBING, aluminium, vehicle 
mountable, including ALL of the following:
  (a) impact energy absorbing enclosures, with OR without energy 
      absorbing tubes;
  (b) support frames;
  (c) electro-hydraulic tilting docking station OR rotator;
  (d) vehicular brake lights AND indicators

MATERIAL HANDLERS, without attachments, having ALL of the 
following:
  (a) diesel engine NOT less than 85 kW power output;
  (b) turning radius NOT less than 7 m;
  (c) operating weight NOT less than 14 t;
  (d) boom AND loading stick length NOT less than 8 m;
  (e) elevation cabin;
  (f) NOT less than eight solid OR pneumatic rubber tyres OR 
      tracked ;
  (g) stabilisers AND/OR blade

FLUID BED PROCESSORS, bowl capacity NOT greater than 65 litres

EXTRUDERS, CELLULOSE FIBRE PROCESSING, twin screw, having ALL of 
the following: 
  (a) electric motor;
  (b) gearbox;
  (c) counter rotating screws;
  (d) heated barrels;
  (e) crammers;
  (f) extraction cyclones

CUT-ORDER MACHINES, programmable logic controlled, including ALL
of the following:
  (a) supply AND discharge tables;
  (b) pneumatic tipping cradles;
  (c) unroll cradles;
  (d) optical measuring unit;
  (e) cross cutting knives;
  (f) cutting inspection conveyor tables;
  (g) rolling up units;
  (h) integrated operator station

SERIALISATION AND INSPECTION PACKAGING MACHINES, being ALL of 
the following:
  (a) carton tracking machine;
  (b) case packing machine;
  (c) linemaster platform

PIPELINE FLANGE ADAPTERS, SUBSEA, having ALL of the following:
  (a) steel ball gripping mechanism within tapered housings;
  (b) graphite seals;
  (c) hydraulic mechanism,
with OR without ANY of the following:
          (i) remotely operated vehicle control interface panel;
         (ii) hydraulic tensioners;
        (iii) deployment frame

PIPE SEAL REPLACEMENT TOOL, SUBSEA, remote controlled, having 
ALL of the following:
  (a) buoyancy blocks;
  (b) seal carrier;
  (c) aluminium frame;
  (d) hydraulic seals AND pipes

SNOW MAKING AND DISTRIBUTION PLANT, container mounted, having 
ALL of the following:
  (a) flake ice maker;
  (b) insulated containers;
  (c) heating element;
  (d) screw compressor;
  (e) evaporative condenser;
  (f) hopper;
  (g) screw conveyor;
  (h) air blower;
  (i) rotary valve interface

SUBSEA PIPE COATING REMOVAL MACHINES, consisting of ALL of the 
following:
  (a) motorised steel AND carbide brushes;
  (b) remotely operated vehicle interface panel;
  (c) hydraulic pipe clamps;
  (d) steel AND glass reinforced plastic deployment AND storage 
      basket

BENTONITE SCATTERING MACHINES, including ALL of the following:
  (a) electrical control cabinet;
  (b) buffer tank;
  (c) auger screw feeder AND stone separator;
  (d) dust extractor vacuum fan AND filter;
  (e) dosing tank;
  (f) bentonite scattering AND dosing rollers, including BOTH 
      of the following:
          (i) doctor blades;
         (ii) powder release brushes,
  (g) tarpaulin tank top, incorporating magnetic locks;
  (h) main steel frame, including ALL of the following:
          (i) guards;
         (ii) platforms;
        (iii) walkways

BOTTLE CLOSURE ASSEMBLY MACHINE, programmable logic controlled, 
including BOTH of the following:
  (a) automated feeder;
  (b) assembling speed NOT less than 40,000 units per hour

BOBBIN STRIPPING MACHINES, programmable logic controlled, having 
ALL off the following:
  (a) conveyors;
  (b) rotating circular blades;
  (c) cyclone ducts;
  (d) blowers

WASTE SEPARATION MACHINES, including ALL the following:
  (a) vacuum OR blower;
  (b) diesel OR hydraulic OR electric powered fan;
  (c) vacuum OR blower head connector, 
with OR without hoses

SHOCK ABSORBERS, VISCOELASTIC VIBRATION DAMPING, including BOTH 
of the following:
  (a) viscous fluid, being ANY of the following:
           (i) bitumen;
          (ii) polybutene;
         (iii) silicone based,
  (b) top plate mounted piston

METALLISERS, PLASTIC FILM, vacuum, having BOTH of the following:
  (a) roll width NOT greater than 2 900 mm;
  (b) roll diameter NOT greater than 1 270 mm

AIR BLOWERS, WOOD CHIP SEPARATING, having ALL of the following:
  (a) gravimetric throughput NOT less than 25 t/h;
  (b) volumetric throughput NOT less than 200 m3/h; 
  (c) maximum wind speed NOT greater than 3 m/sec

VACUUM LOADERS, including ALL of the following:
  (a) positive displacement bi-lobe pump;
  (b) hydraulic drive loading boom;
  (c) blower exhaust silencer;
  (d) single mode filtration;
  (e) self cleaning cyclone separator

AIR SEPARATING MACHINES, WOOD CHIP SORTING, incorporating ALL of 
the following:
  (a) water pipe connectors;
  (b) water nozzles;
  (c) fan incorporating a transmission AND guard;
  (d) fan motor with frame;
  (e) cooling fan;
  (f) outlet rotary valve;
  (g) air speed regulating valve with linear actuator;
  (h) linear actuator control box;
  (i) rotation controls

TROLLIES, MILITARY TANK TARGET HOLDING AND MOVING, rail mounted, 
self-propelled, including ALL of the following:
  (a) diesel engine;
  (b) remote controls;
  (c) target panel holder,
with OR without wooden OR metal target panels

FOLDING AND CUTTING MACHINES, NAPPY

CORE WRAPPING AND CUTTING MACHINES, NAPPY, having ALL of the 
following:
  (a) core wrap unwinding AND splicing module;
  (b) acquisition layer unwinding AND splicing module;
  (c) combined acquisition layer applicator AND core cutting 
      module, including gluing module

NAPPY EAR FABRICATION AND APPLICATION MACHINE, having ALL of the 
following:
  (a) integrated nappy back ear unwinding AND splicing AND
      shaping module;
  (b) integrated nappy front ear unwinding and splicing module;
  (c) integrated front ear transport AND application AND cutting 
      module, including gluing module;
  (d) nappy back ear bonding unit;
  (e) front ear shaping AND cutting unit;
  (f) back ear shaping AND cutting unit;
  (g) back ear transport AND application AND cutting unit, 
      including gluing module

TOP AND BACK SHEET MACHINES, NAPPY, having ALL of the 
following:
  (a) back sheet unwinding AND splicing unit;
  (b) elastic unwinders;
  (c) top sheet unwinding AND splicing unit;
  (d) frontal tape unwinders AND splicing unit;
  (e) frontal tape application AND cutting unit, including 
      gluing module

PULL AND PRESS MACHINES, NAPPY

NAPPY CORE MACHINES, having ALL of the following:
  (a) filtration unit;
  (b) powder meters AND conveyors;
  (c) core forming drum

EDDY CURRENT SEPARATORS, ROAD SWEEPER RECYCLING PLANT, including 
ALL of the following:
  (a) belt conveyor;
  (b) induction magnet;
  (c) induction pulleys;
  (d) control cabinet;
  (e) steel supporting structure AND chutes AND accessibility 
      structures

MAKE UP CLAMPS, RISER CONNECTION, OIL AND/OR GAS WELL, hydraulic 
rollers

BLADDER ACCUMULATORS, hydraulic fluid, having ALL of the 
following:
  (a) welded pressure vessel;
  (b) flexible bladder with gas valve;
  (c) hydraulic connection with check valve OR perforated disc

SEPARATORS, WASTE MATERIAL, air, having ALL of the following:
  (a) rotary valve inlet;
  (b) zig zag sifting channel;
  (c) fan;
  (d) light material output with rotary valve;
  (e) heavy material output with rotary valve

WRENCHES, BLOCK, hydraulic, whether OR not assembled, having NOT 
less than two torque cylinders

SORTING MACHINES, PLASTIC BOTTLE CLOSURE, being one OR both of 
the following:
  (a) vertical sorter with magnetic guide rail;
  (b) cavity number reader AND sorter including ALL of the
      following:
            (i) camera;
           (ii) lens;
          (iii) lighting unit;
           (iv) software

SLIDING DOORS, TEMPERATURE CONTROL INSULATED, motorised, 
including ANY of the following:
  (a) push button opener;
  (b) computer controlled opener;
  (c) pull down switch opener

CUTTING MACHINES, MEDICINE BLISTER PACK SHEET, programmable 
logic controlled, including BOTH of the following:
  (a) feeders;
  (b) cutting press AND dies

RELEASERS, TOOL STRING, OIL AND/OR GAS WELL, with OR without 
fishing neck adapters, including ALL of the following: 
  (a) DC motor; 
  (b) sliding sleeves; 
  (c) switch; 
  (d) valve; 
  (e) release nut; 
  (f) release lugs

CUTTING PLOTTERS, COMPUTER-AIDED DESIGN AND MANUFACTURING, 
having BOTH of the following:
  (a) personal computer;
  (b) software

MOORINGS, AIRCRAFT, being ANY of the following
  (a) rings;
  (b) bracket

SELECTIVE SHIFTING TOOLS, DOWNHOLE, OIL AND/OR GAS WELL 
EQUIPMENT, whether OR not assembled, including ALL of the 
following:
  (a) linear actuator module;
  (b) hydraulic engagement module with OR without 
      interchangeable locking anchor;
  (c) monitoring AND/OR measuring instruments

BOLT TENSIONING TOOLS, HYDRAULIC, SUBSEA, including ALL of the 
following:
  (a) indexing rotator;
  (b) stud bolt AND nut carriers;
  (c) stud bolt AND nut carrier removal units;
  (d) remotely operated vehicle interface panel;
  (e) installation guides;
  (f) deployment tool carrying baskets

SOAP CUTTERS, programmable logic controlled, including ALL of 
the following:
  (a) measuring encoder;
  (b) belt conveyor;
  (c) cutting plane height adjuster;
  (d) covers with interlocks;
  (e) movable wheels

GRADING AND SEPARATING MACHINES, automated, including ALL of the 
following:
  (a) inlet hopper;
  (b) adjustable grading channel;
  (c) grader;
  (d) separator;
  (e) conveyor;
  (f) discharge chutes;
with OR without one OR more of the following:
         (i) supports with OR without steps AND/OR rails;
        (ii) control panels; 
       (iii) motor starters;
        (iv) electrical connectors AND/OR fittings

PRESSES AND/OR STAMPERS, SOAP, multi flash, programmable logic 
controlled, with OR without die chiller, including ALL of the 
following:
  (a) stamping unit;
  (b) vertical OR horizontal infeeders;
  (c) stamped bar dischargers;
  (d) die sets

SOAP PLODDER MACHINES, duplex vacuum, programmable logic 
controlled, with OR without chiller, including ALL of the 
following:
  (a) reducers;
  (b) barrels;
  (c) silumin alloy worms;
  (d) pelletising head;
  (e) vacuum chamber;
  (f) extrusion conical head

FLUSHING SYSTEM, TANK OR SEWER, programmable logic controlled, 
including ALL of the following:
  (a) hydraulic cylinder;
  (b) hydraulic pump;
  (c) hydraulic hose;
  (d) control panel;
  (e) ultrasonic water level sensor;
  (f) water reservoir;
  (g) hydraulic power unit, including BOTH of the following:
         (i) electric motor; 
        (ii) oil reservoir

SORTING AND COLLATING MACHINES, including ALL of the following:
  (a) dosing elevators;
  (b) product counters with vibratory feeding channels;
  (c) bucket elevators

INOCULATION AND STREAKING IN-VITRO DIAGNOSTIC SYSTEM, whether OR 
not assembled, including ALL of the following:
  (a) conveyor belts;
  (b) control switches AND/OR buttons;
  (c) optical sensors;
  (d) hood AND/OR cover;
  (e) barcode scanners;
  (f) grippers;
  (g) integrated pipet tip rack holder;
  (h) sample slide rack holder;
  (i) sample shaker;
  (j) clamp;
  (k) exhaust chute with an air filter;
  (l) lifting AND rotating cylinder;
  (m) barcode label printer;
  (n) foot pedal;
  (o) sample slide dispenser;
  (p) dish shifter;
  (q) sample dish lid manipulator with suction cups;
  (r) handheld scanner;
  (s) touch screen AND/OR monitor;
  (t) computer,
with OR without ANY of the following:
            (i) drip trays;
           (ii) waste containers;
          (iii) bead dispenser

MICRO DOSING FEEDERS, including ALL of the following:
  (a) feeders having auto shut-off gates;
  (b) differential proportioning scales;
  (c) electronic weighing;
  (d) analog AND serial interfaces;
  (e) ingredient capacity NOT less than 200 kg

PARTICLE BOARD FORMING LINE, including ALL of the following:
  (a) belt conveyors;
  (b) screw conveyors;
  (c) board mat core layer forming machines, including ALL of the
      following:
           (i) screen;
          (ii) distribution flap;
         (iii) layer front former;
          (iv) layer rear former;
           (v) smoothing roller;
          (vi) moisture meter,
  (d) board mat surface layer forming machines, including ALL of
      the following:
           (i) diverter arm;
          (ii) board mat front former; 
         (iii) board mat rear former

THERMOSETTING PLASTIC RESIN METERING, MIXING AND DOSING SYSTEM, 
having ALL of the following:
  (a) closed loop controlled meter;
  (b) pressurised resin AND hardener mixing head;
  (c) maximum thermosetting plastic resin output flow NOT less
      than 25 g/s

WASHING AND DISINFECTING MACHINES, including ANY of the 
following:  
  (a) conveyors;
  (b) shuttles;
  (c) carts AND/OR trollies

CLEANING AND WARMING AND DRYING UNIT, BOTTLE, programmable logic 
controlled, including: ALL of the following
  (a) bottle size NOT less than 65 mm and NOT greater 
      than 100 mm;
  (b) production speed NOT greater than 10 500 bottle per hour;
  (c) in-feed AND out-feed conveyor;
  (d) stainless steel water tank

DOWNHOLE SHIFTING TOOL, OIL AND/OR GAS WELL, whether OR not 
assembled, with OR without monitoring AND/OR measuring 
instruments, including ALL of the following:
  (a) hydraulic module;
  (b) compensator;
  (c) anchor;
  (d) linear actuator;
  (e) spacers

LAMINATE COATING MACHINES, including ALL of the following:
  (a) coating knives;
  (b) coating heads;
  (c) winder shafts;
  (d) 2 zone dryer cabins;
  (e) unwinder shafts;
  (f) rewinders

EXTRACTION AND REFILLING MACHINES, FIRE EXTINGUISHING POWDER, 
including ALL of the following:
  (a) trolley mounted side-channel blower;
  (b) filter unit;
  (c) stainless steel suction lance;
  (d) nylon lance;
  (e) hoses,
with OR without hose fittings AND/OR tank adaptors

RECIRCULATION AQUACULTURE SYSTEM, FISH HATCHERY AND NURSERY, 
programmable logic controlled, including ALL of the following:
  (a) multi stage water treatment having ALL of the following:
           (i) mechanical filer;
          (ii) biological filter;
         (iii) trickling filter AND/OR vacuum degassing unit;
          (iv) pumps,
  (b) oxygen module;
  (c) feed distribution module;
  (d) sludge treatment unit;
  (e) temperature regulation module;
  (f) ozone disinfection module

PHARMACEUTICAL STORAGE AND DISPENSING MACHINES, programmable 
logic controlled, whether OR not assembled, including ALL of the 
following:
  (a) storage racks AND/OR containers;
  (b) pickers;
  (c) barcode reader;
  (d) control panel;
  (e) conveyor module including BOTH of the following:
          (i) conveyor belt with OR without deflectors AND/OR 
              wipers;
         (ii) chutes,
  (f) input module including BOTH of the following:
          (i) record keeping software;
         (ii) sensors

VIBRATORY NEEDLE MACHINES, AIR GAP PREVENTION, including ALL of 
the following:
  (a) vibration frequency NOT less than 100 Hz;
  (b) NOT less than four needles;
  (c) needle lifting device

HANGERS AND SUPPORTS, PIPE, being ANY one OR more of the 
following:
  (a) constant hangers;
  (b) constant supports;
  (c) spring hangers;
  (d) spring supports

TURBINE MAINTENANCE DISASSEMBLY AND ASSEMBLY MACHINES, 
hydraulically operated, including BOTH of the following:
  (a) fluid AND/OR vacuum pressure controls, including air OR
      gas controls;
  (b) connection tightness controls

MACHINE TOOLS, SAFETY VALVE LOCK OPENING, OIL AND/OR GAS WELL, 
downhole, hydraulically AND mechanically operated, whether OR 
not assembled

GLUE DOSING MACHINES, programmable logic controlled, having a 
maximum dosage capacity NOT exceeding 15 000 kg/h

BINS, METERING, WOOD CHIP, having BOTH of the following:
  (a) electronic weight transducer; 
  (b) throughput capacity NOT less than 360 m3/hr

DOSING MACHINES, ALUMINIUM PASTE, having ALL of the following:
  (a) casting frequency NOT greater than 20 castings per hour;
  (b) dosing accuracy greater than 95%

TUB OPENERS, NESTED VIAL AND SYRINGE, programmable logic 
controlled, , having ALL of the following:
  (a) robotic lid and foil removal;
  (b) maximum speed NOT less than 6 tubs per min;
  (c) maximum tub size NOT less than 97.5 mm and NOT greater 
than 
      154mm

BAG OPENERS, NESTED VIAL AND SYRINGE, programmable logic 
controlled, having ALL of the following:
  (a) robotic bag cutters;
  (b) robotic transfer arms;
  (c) maximum speed NOT less than 6 tubs per min;
  (d) maximum tub size NOT less than 97.5 mm and NOT greater 
than 
      154mm

PACKERS, CASING, OIL AND/OR GAS WELL, with OR without end 
fittings, including ALL of the following:
  (a) expansion valve;
  (b) expandable metal bladder with bonded elastomer covering;
  (c) mandrel

INSPECTION MACHINES, GLASS CONTAINER, having caustic detection 
module

DECAPPING MACHINES, STORAGE TUBE SAMPLE, with OR without one OR 
both of the following:
  (a) cappers;
  (b) gas purge

ANCHOR TOOLS, DOWNHOLE, OIL AND/OR GAS WELL EQUIPMENT, whether 
OR not assembled, including ALL of the following:
  (a) NOT less than three anchor arms;
  (b) pressure gauge;
  (c) potentiometer;
  (d) anchor grips

DIFFUSERS, FRAGRANCE, battery operated, having All of the 
following: 
  (a) electric dispensing unit; 
  (b) one OR more refills;
  (c) batteries

FLATBED CUTTER, PC interfaced, with OR without ANY of the 
following:
  (a) adjustable vacuum;
  (b) vacuum pump; 
  (c) workstation;
  (d) roll off unit;
  (e) modules AND/OR tools being ANY of the following:
           (i) automatic initialisation tool;
          (ii) kiss cutting module;
         (iii) routing tool;
          (iv) routing module;
           (v) cutting tool;
          (vi) scoring tool; 
         (vii) drawing tool; 
        (viii) creasing tool;
          (ix) driven rotary tool;
           (x) electrical oscillating tool;
          (xi) pneumatic oscillating tool;
         (xii) v-cutting tool;
        (xiii) perforation tool;
         (xiv) punching module;
          (xv) marking module;
         (xvi) passe-partout tool; 
        (xvii) raster braille tool

CLEAN-IN-PLACE CLEANING SYSTEM, GLASS BOTTLING LINE, having ALL 
of the following:
  (a) tanks;
  (b) pumps;
  (c) heat exchanger;
  (d) control cabinets;
  (e) cleaning rails

CRAWLER UNDERCARRIAGES AND SUPERSTRUCTURES, MOBILE STACKING 
BRIDGE OR RADIAL STACKER, programmable logic controlled, GPS 
guided, with OR without engines, having ALL of the following:
  (a) crawler length NOT less than 8 m;
  (b) crawler pad width NOT less than 1.8 m;
  (c) crawler self-correcting leveller

AIR BLOWER SEPARATORS, mobile, with OR without belt conveyors, 
including ALL of following:
  (a) one OR more blower fans;
  (b) vibrating pan feeder;
  (c) one OR more separator drums

COATING MACHINES, FOODSTUFF, AND/OR CHEMICAL AND/OR 
PHARMACEUTICAL TABLET

DETONATOR ASSEMBLING MACHINES, including ALL of the following:
  (a) coilers;
  (b) coiler feeders;
  (c) detonator feeders;
  (d) crimpers

TENSIONERS, RAILWAY AND/OR TRAMWAY OVERHEAD CONTACT LINE, 
incorporating springs, with OR without supporting brackets

EXTRUSION COATING AND LAMINATION LINE, PAPER AND/OR FABRIC, 
including ALL of the following:
  (a) coating layer weight range NOT greater 100 g/m2;
  (b) substrate width NOT greater 3 300 mm;
  (c) hoppers;
  (d) sensors;
  (e) dosers;
  (f) magnetic absorber;
  (g) rewinder;
  (h) unwinders

PULPERS, FOOD WASTE, with OR without cutlery magnets, having ALL 
of the following:
  (a) control panel;
  (b) water circulation pumps;
  (c) grinder;
  (d) centrifugal dehydration;
  (e) pulping capacity NOT greater than 450 kg/hour

WASHERS, WATER PRESSURE, MACHINE KNIFE RING, programmable logic 
controlled, including ALL of the following:
  (a) waste water tank;
  (b) knife ring rotation gearbox;
  (c) pump AND piping;
  (d) pneumatic drive, incorporating an oil lubricator AND
      pressure gauge;
  (e) control panel

STAGE TOOLS, DOWNHOLE CEMENTING, with OR without one OR both of 
the following:
  (a) darts;
  (b) plugs

WAVE GENERATING ASSEMBLIES consisting of ALL of the following:
  (a) motor;
  (b) gearbox;
  (c) rack AND pinion;
  (d) paddle;
  (e) motor controller

ULTRA VIOLET CURING LINE, PARTICLE BOARD, including ALL of the 
following:
  (a) gallium doped lamp unit;
  (b) inerted excimer lamp unit;
  (c) lamp substructures AND heat exchanger;
  (d) air-cooled exhaust;
  (e) switch cabinet

SPECIAL EFFECTS MACHINES, WIND AND/OR MIST AND/OR SCENT, 
INTERACTIVE RIDE, including ALL of the following:
  (a) water level sensor;
  (b) air compressor;
  (c) mist motor;
  (e) valves;
  (f) cooling fan

SLUDGE SCRAPERS, including ALL of the following:
  (a) adjustable scraper speed;
  (b) angle arm brackets;
  (c) gliding strips;
  (d) hydraulic OR electric motors;
  (e) moving floor;
  (f) piston rod extension;
  (g) push AND pull rod holder;
  (h) sensor;
  (i) stainless steel wedge shaped sections

REINFORCEMENT HANDLING AND PREPARATION MACHINES, CONCRETE PANEL, 
being ANY of the following:
  (a) needle brushing unit;
  (b) needle locking AND unlocking mechanism

POSITIONING MOUNTS, SIGNAL RECEPTION AND/OR TRANSMISSION, 
including ALL of the following:
  (a) mounting plate;
  (b) vertical adjustment NOT less than 85 degrees;
  (c) horizontal adjustment NOT less than 170 degrees;
  (d) electric motor,
with OR without EITHER of the following:
         (i) analogue controller;
        (ii) network connectivity

SNUBBERS, hydraulic, having ALL of the following: 
  (a) control valve;
  (b) piston;
  (c) compensating valve AND/OR reservoir

SORTERS, DETECTION AND EJECTION, SCAN CAMERA, whether OR not 
assembled, including graphic control panel

SORTERS, DETECTION AND EJECTION, infrared, whether OR not 
assembled, including graphic control panel

LAMINATION MACHINES, having BOTH of the following:
  (a) core width NOT less than 649 mm and NOT greater than 
      1 341 mm; 
  (b) maximum mechanical speed greater than 350 m/min

RAW MATERIAL EXTRUDING AND/OR DOSING BINS, having screw feeders

RECYCLED PLASTIC WASHING LINE, including ALL of the following:
  (a) single shaft shredders;
  (b) pre-wash screw AND friction cleaners;
  (c) fine shredding AND granulation machines;
  (d) separation tank OR hydro cyclones;
  (e) thermal driers
with OR without near-infrared machine AND/OR air separators

DE-BRICKING MACHINES, track mounted, remote controlled, 
including ALL of the following:
  (a) hydraulic hammer;
  (b) pointed chisel;
  (c) hammer adapter;
  (d) bucket

PIPETTE MACHINES, multichannel, manual OR automated, with OR 
without pipetting heads

EXHAUST GAS MODULES, DUAL FUEL ENGINE, unassembled, with OR 
without ventilation fans, having ALL of the following:
  (a) expansion vessels;
  (b) frame;
  (c) light fuel oil unloading pump;
  (d) light oil transfer pump;
  (e) maintenance water tanks;
  (f) oily water transfer pumps;
  (g) pipes AND flanges;
  (h) silencers;
  (i) sludge pumps;
  (j) support;
  (k) valves

HOSE REELS, hydraulic, incorporating two hydraulic power packs

VACUUM COATER SYSTEMS, including ALL of the following:
  (a) inlet;
  (b) vacuum pumps;
  (c) liquid tap filter set;
  (d) vacuum coater with hopper; 
  (e) oil dosing units

WASHING AND DISINFECTING MACHINES, with integrated dryer

ADIABATIC HUMIDIFIERS, ultrasonic, electric, having an output 
NOT less than 0.5 kg/h and NOT greater than 18 kg/h

SHELL CASTING SYSTEM, consisting ALL of the following:
  (a) central processing unit AND software;
  (b) cell controls;
  (c) robots;
  (d) robot controllers;
  (e) load station AND unload station doors; 
  (f) transfer station;
  (g) conveyor carriers;
  (h) vertical sander unit, having ALL of the following:
           (i) body; 
          (ii) base;
          (iii) auger;
  (i) safety fence with safety interlock

TOOLS, SHAFT ROTATION AND AXIAL DISPLACEMENT

VESSEL DECK TRESTLES, SEMI TRAILER, having ALL of the following:
  (a) automated connection AND pneumatic release;
  (b) lash-on OR twistlock securment on vessel;
  (c) coupling indicators;
  (d) emergency release

SORTING LINE, FISH, including ALL of the following:
  (a) weight scales AND weight sorters;
  (b) weighing AND packing unit;
  (c) production controller;
  (d) conveyors

GRAVIMETRIC DOSING MACHINES, having BOTH of the following:
  (a) gravimetric dosing bins;
  (b) throughput capacity of NOT less than 55 t/h

DENSITY SEPARATORS, WASTE MATERIALS, having a density cut NOT 
less than 1 g/cm3

SORTERS, CUTLERY, automatic

VERTICAL WASHING AND DRYING LINE, PALLET AND/OR PALLET DIVIDER, 
having ALL of the following:
  (a) washing tunnel;
  (b) rinsing section;
  (c) drying section;
  (d) pushover unit;
  (e) conveyor

FLOOR SCRAPING MACHINES, self-propelled, having an operator's 
seat

DE-BOTTLING MACHINES, including ALL of the following:
  (a) robots;
  (b) bottle cutting station;
  (c) pooling tub;
  (d) chute;
  (e) gutters;
  (f) safety cell

FLUSHING CONVERSION MACHINES, TOILET CISTERN, 
including ALL of the following:
  (a) actuator;
  (b) controller;
  (c) mounting units;
  (d) battery cover;
  (e) power adapter AND cable,
with OR without allen keys AND/OR screws

DEBAGGING MACHINE, FROZEN PLASMA, including ALL of the following:
  (a) bag cutter;
  (b) squeezer;
  (c) pusher;
  (d) discharge chute

LIQUID AND/OR SOLID PRODUCT EXTRACTION MACHINES, supercritical 
fluidic solvent operated, programmable logic controlled, 
including BOTH of the following:
  (a) reservoirs AND/OR vessels;
  (b) pumps,
with OR without mass flow meters

ASSIST MODULES, SUBSEA ACCUMULATOR, having ALL of the following:
  (a) working pressure NOT less than 65 MPa; 
  (b) working temperature NOT greater than 125 degrees Celsius;
  (c) reservoir capacity NOT greater than 19.5 litres

PULVERISED COAL DOSING AND FEEDING SYSTEM, programmable logic 
controlled, whether OR not assembled, consisting of ALL of the 
following:
  (a) multi chute feeder;
  (b) shut off gates;
  (c) calibration tubes;
  (d) pressure sensors; 
  (e) agitator hoppers;
  (f) horizontal rotary feeders;
  (g) mass flow meters;
  (h) feeding shoes;
  (i) pressure compensation lines;
  (j) compressed air conditioners;
  (k) cabling;
  (l) roots blowers;
  (m) feeding tubes

METAL COATING MACHINE, TIN PLATE, having ALL of the following:
  (a) pallet changer;
  (b) sheet feeder;
  (c) outfeed transport belt

LAMINATE COATING MACHINES, programmable logic controlled, 
including ALL of the following:
  (a) shaftless unwinders AND rewinders;
  (b) coating heads AND blades;
  (c) vapour exhauster;
  (d) drying chambers;
  (e) interchangeable coating trolleys including BOTH of the 
      following: 
       (i) coating heads;
      (ii) rollers AND/OR blades

SAND DISTRIBUTION SYSTEM, TRAM AND/OR TRAIN, whether or NOT 
bogie mounted, having ALL of the following: 
  (a) piston dosing;
  (b) sand bin;
  (c) air compressor;
  (d) sand hose OR nozzle unit

CLEANING LINE, ultrasonic, programmable logic controlled,  
including ALL of the following:
  (a) tanks having independent agitation;
  (b) drain;
  (c) inlet;
  (d) internet connectivity; 
  (e) baskets

COMPACTORS AND/OR BALERS, waste AND recycling, with OR without 
dual compaction, having BOTH of the following:
  (a) electrical AND/OR pneumatic AND/OR hydraulic operation;
  (b) machine weight NOT greater than 5 200 kg

AIR BLOWERS, WOOD CHIP SEPARATING, having ALL of the following:
  (a) gravimetric throughput NOT less than 25 t/hr;
  (b) volumetric throughput NOT less than 200 m3/hr; 
  (c) wind speed NOT greater than 4.0 m/sec

STEM EXTENSIONS, telescopic, having BOTH of the following:
  (a) polyethylene outer casing;
  (b) tapping saddle AND internal steel rod

BRUSHES, PARTICLE BOARD PANEL, double-sided, with OR without ANY 
of the following:
  (a) particle suction device;
  (b) horizontal adjustment frame;
  (c) height adjustment mechanism;
  (d) brush adjustment valve;
  (e) anti-static solution spray with pump AND spray reservoir;
  (f) compressed air regulator with filter;
  (g) pressure roller drive

CLEANING AND CENTRING MACHINE, KILN CAR, programmable logic 
controlled, including ALL of the following:
  (a) crane gantries;
  (b) chain haulage indexers;
  (c) vacuum head with ducting;
  (d) mobile block gripper carriage with gripper head;
  (e) alignment unit; 
  (f) filter unit;
  (g) waste container;
  (h) safety fencing;
  (i) light beam safety unit;
  (j) control panel

DEWATERING SCREW PRESSES, including ALL of the following:
  (a) feed hopper;
  (b) NOT less than two conical screws;
  (c) screen plates AND/OR mesh;
  (d) spray nozzles;
  (e) pump;
  (f) cleaning lance;
  (g) retaining basket

CUTTING MACHINES, including ALL of the following:
  (a) cutting AND/OR slitting knives;
  (b) roller driven infeed press belts;
  (c) cutting mouth width NOT less than 420 mm;
  (d) adjustment gauges;
  (e) internal dust vacuum cleaner;
  (f) geared motor driven, 
with OR without ANY of the following:
        (i) tools;
       (ii) grease gun;
      (iii) instruction manuals

DISCONNECT TOOLS, OIL AND/OR GAS WELL, hydraulic, including ALL 
of the following:
  (a) upper AND lower housing;
  (b) shear piston;
  (c) shear screws;
  (d) drop balls;
  (e) ball seat;
  (f) ball seat retainer;
  (g) discs;
  (h) rings

WINDING MACHINES, having ALL of the following:
  (a) cutter;
  (b) hot melt glue applicator;
  (c) slitter

CASING CEMENTING PLUG SYSTEM comprising ALL of the following:
  (a) integral pressure equaliser;
  (b) primary burst tube;
  (c) secondary burst tube,
with OR without plugs AND/OR darts

SAMPLE RETRIEVAL MODULE, RESERVOIR FLUID, DOWNHOLE, with OR 
without sample bottles, including ALL of the following:
  (a) flowline;
  (b) electronic sub-unit;
  (c) valves

PAPER WRAPPING DISPENSERS, including BOTH of the following:
  (a) infeed conveyor;
  (b) outfeed hydraulic elevation conveyor table

VINYL FOIL WASTE COLLECTION MACHINES, including a chipping unit

KITS, GAS CUTTER, consisting of ALL of the following:
  (a) blow pipes;
  (b) gas flow pressure regulators;
  (c) nozzles;
  (d) flashback arrestors;
  (e) tip cleaners;
  (f) lighters;
  (g) spanners;
  (h) hoses with fittings;
  (i) carry cases;
  (j) protective goggles;
  (k) instruction books AND/OR guideline booklets;
  (l) gas cutters

GUIDED PLATFORMS AND/OR TARGETS, steerable, including ALL of the 
following:
  (a) platform AND/OR chassis having a height NOT greater than 
      15 cm;
  (b) battery operated drive AND/OR motor;
  (c) driverless AND/OR robotic AND/OR radio controls,
with OR without EITHER of the following: 
         (i) soft target models;
        (ii) dummies

PHARMACEUTICAL STORAGE AND DISPENSING SYSTEM, programmable 
logic controlled, whether OR not assembled, including ALL of the 
following:
  (a) storage racks AND/OR containers AND/OR shelves;
  (b) pickers;
  (c) barcode reader;
  (d) control panel AND/OR interface;
  (e) conveyors AND/OR chutes;
  (f) input system, including BOTH of the following:
         (i) stock recording AND/OR measurement;
        (ii) sensors AND/OR scanners

BALING MACHINES, PLASTIC AND/OR PAPER WASTE MATERIAL, including 
BOTH of the following:
  (a) ram having a rated force NOT less than 153 tonnes;
  (b) baler having a weight NOT less than 39 999 kg

SETS, FISHING WATERCRAFT, whether OR not assembled, consisting 
ALL of the following:
  (a) watercraft having a motor AND/OR jet;
  (b) pulley; 
  (c) magnetic ring,
with OR without ANY of the following:
          (i) hooks;
         (ii) foam trace line AND/OR racks;
        (iii) grease tube;
         (iv) lithium battery

PROCESSING STATION, 3D PRINTER, with OR without external storage 
tanks, including ALL of the following:
  (a) materials mixing AND loading system;
  (b) cooling module;
  (c) material extraction;

PIPETTING HEADS, LIQUID HANDLING, LABORATORY, having NOT less 
than 24 channel heads and NOT greater than 1 536 channel heads

MAT FORMING LINE, WOODEN BOARD PRODUCTION PLANT, 
including ALL of the following:
  (a) fibre mat former;
  (b) pre-pressing station having hydraulic drives AND/OR 
      controls;
  (c) spray applicator;
  (d) metal detector;
  (e) mat divider;
  (f) compactor;
  (g) side AND/OR edge trimming saw;
  (h) belt conveyors;
  (i) control panels AND/OR cabinets AND/OR monitors,
with OR without ANY of the following:
            (i) explosion suppressors;
           (ii) moisture analysers having lenses AND/OR
                infra-red measurement;
          (iii) weighers AND/OR scales

BARRIER FLUID CONDITIONING SYSTEM, MINERAL PROCESSING PLANT, 
including ALL of the following:
  (a) steel stand;
  (b) flanged bottom vessel;
  (c) heat exchangers AND/OR cooling coils;
  (d) flow AND/OR temperature transmitters;
  (e) accumulator;
  (f) valves AND/OR pipe fittings AND/OR flanges,
with OR without pump

SPUTTER AND/OR CARBON COATING UNIT, LABORATORY SAMPLE

VENTILATORS, HEAT RECLAIM, ceiling recessed OR wall mounted, 
including ALL of the following:
  (a) two-path ventilation;
  (b) sensible AND latent heat exchange;
  (c) corrugated layered paper core thickness NOT greater than  
      40 microns

BIOLOGICAL SAMPLE STORAGE AND RETRIEVAL SYSTEM, including ALL 
of the following:
  (a) insulated cold enclosures AND/OR cryogenic tanks;
  (b) sample storers AND/OR selectors AND/OR racks;
  (c) picking workstations AND/OR operator ports;
  (d) barcode readers;
  (e) control terminal AND/OR display;
  (f) sample input AND/OR output units,
with OR without connectivity AND/OR remote access controls

PERFORATING GUN RELEASE TOOL, OIL AND/OR GAS WELL, whether 
OR not assembled, including ALL of the following:
  (a) gun adapters;
  (b) break plugs;
  (c) release fingers;
  (d) release piston

TOILET SYSTEMS, LOCOMOTIVE, vacuum AND/OR pressurised, 
complying with British Standard BS 6853 - 1999 category 1b 
having ALL of the following:
  (a) fresh water tank;
  (b) waste water tank;
  (c) electronic control panels;
  (d) cabin having ALL of the following:
          (i) inner AND external walls;
         (ii) floor AND ceiling;
        (iii) electronic door;
         (iv) vanity panel;
          (v) baby change panel AND table;
         (vi) sanitary AND litter bin,
  (e) supports AND fasteners

DRUM MAGNETS, WASTE SHREDDER, with OR without support frame 
AND/OR magnet drum shaker

WASTE SORTERS, having EITHER of the following:
  (a) laser AND/OR magnetic induction sorting;
  (b) sensors AND/OR cameras,
with OR without EITHER of the following:
        (i) shaker;
       (ii) controls

SUSPENSION MAGNETS, WASTE AND/OR SCRAP PROCESSING, with OR 
without supports AND/OR suspension coils

BANNER FINISHING MACHINES, keder, tape reinforcement OR hem 
welding, assembled OR unassembled, having ALL of the following:
  (a) loading station;
  (b) welding station;
  (c) eyeletting AND slitting station;
  (d) rewinding station

WELLHEAD MULTI TOOLS, OIL AND/OR GAS WELL, assembled OR 
unassembled, having ALL of the following:
  (a) drum reel;
  (b) hose;
  (c) injector;
  (d) stripper;
  (e) spring container;
  (f) wellspring tool;
  (g) pump

CLEANING LINES, ultrasonic, programmable logic controlled, 
having ALL of the following:
  (a) immersion rinse modules;
  (b) ultrasonic cleaning tanks;
  (c) de-ionised water unit;
  (d) conveyors;
  (e) carrier;
  (f) filters;
  (g) hot air dryer;
  (h) vertical oscillating mechanism; 
  (i) screw jack lift-out function

PAINTBALL MAGAZINE RELOADERS, having a magazine feeder AND/OR 
release

TUBING HANGER ASSEMBLIES, SUBSEA OIL AND/OR GAS WELL, whether OR 
not assembled, having pup joints, with OR without ANY of the 
following:
  (a) plugs;
  (b) connectors;
  (c) seals;
  (d) electrical circuitry;
  (e) valves

SYNTHESISING AND DISPENSING MACHINES, RADIOACTIVE TRACER, 
including ALL of the following:
  (a) dispenser;
  (b) shielded chamber;
  (c) operator terminal AND/OR computer controls

WINDING AND/OR CUTTING AND/OR LABELLING MACHINES, MEDICATION 
POUCH ROLL, including BOTH of the following:
  (a) cutters AND/OR winders;
  (b) labellers

SEPARATOR MACHINES, eddy current, with OR without support 
framework

COIL HOSE WELL CIRCULATION SYSTEMS, having ALL of the 
following:
  (a) flexible coil hose;
  (b) high pressure hose;
  (c) hose drum;
  (d) control panel;
  (e) powerpack cabin;
  (f) blow out preventer;
  (g) lubricator;
  (h) weight bars;
  (i) pumps;
  (j) skids;
  (k) manifolds;
  (l) pipe AND tube fittings;
  (m) lifting unit; 
  (n) stripper pressure control unit;
  (o) coil hose downhole tooling

POSITRON EMISSION TOMOGRAPHY TRACER SYNTHESISERS, including 
ALL of the following;
  (a) reservoir;
  (b) valve actuator;
  (c) syringe actuator;
  (d) reactor;
  (e) temperature AND radioactivity sensor

SCRAPERS, SURFACE SLUDGE, including ALL of the following:
  (a) scraper blades;
  (b) drive bars;
  (c) sledges;
  (d) geared motor AND/OR electric motor AND/OR hydraulic
      cylinder,
with OR without ANY of the following:
          (i) support pillars;
         (ii) scum pipe;
        (iii) scum beach

SCRAPERS, BOTTOM SLUDGE, including ALL of the following: 
  (a) wedge shaped profiles; 
  (b) slides; 
  (c) push AND pull rods; 
  (d) piston rods; 
  (e) adjustable scraper speed; 
  (f) hydraulic OR electric motors

LEAD OXIDE DOSING AND FILLING LINE, POSITIVE TUBULAR BATTERY 
PLATE, programmable logic controlled, having ALL of the 
following:
  (a) operating capacity NOT less than 40 plates per hour;
  (b) crane;
  (c) loading hopper;
  (d) storage racks AND/OR main racks AND/OR turning racks;
  (e) clamps;
  (f) load cells;
  (g) conveyors AND/OR elevators;
  (h) vibrating table with vibrators;
  (i) internal lifting unit;
  (j) funnel with cellular wheel sluices AND/OR filling duct;
  (k) roller tracks;
  (l) subframe with drip tank;
  (m) filling cassettes;
  (n) nailing device;
  (o) weighing AND screening station;  
  (p) bottom bar welding station;
  (q) air filtering system, having two OR more of the following: 
           (i) dust extractors;
          (ii) air inlets AND/OR outlets AND/OR diffusers;
         (iii) pre-cleaner cyclone;
          (iv) filters;
           (v) cassette holders;
          (vi) deflector hoods;
         (vii) level AND/OR pressure sensors;
        (viii) silencers;
          (ix) fans AND/OR ventilators AND/OR exhausters,
  (r) air showering system, having two OR more of the following: 
           (i) air cooling AND/OR heating units;
          (ii) air inlets AND/OR outlets AND/OR diffusers;
         (iii) filters;
          (iv) temperature AND/OR humidity controls; 
           (v) heat exchanger AND/OR evaporator;
          (vi) silencers;
         (vii) deflector hoods;
        (viii) fans AND/OR ventilators AND/OR exhausters,
  (s) loading AND/OR unloading platforms
 with OR without ANY of the following:
           (i) protective housings;
          (ii) traverse mechanism;
         (iii) support block with guide frame;
          (iv) light guards AND/OR curtains;
           (v) dust suction hoods;
          (vi) sensors;
         (vii) motors;
        (viii) lighting AND/OR electrical cables AND/OR  
               connectors;
          (ix) pipes AND/OR mountings AND/OR fittings;
           (x) stairs;
          (xi) doors;
         (xii) hooks;
        (xiii) control cabinets AND/OR panels;
         (xiv) operating AND/OR supporting platforms AND/OR    
               stands AND/OR tables

FILTER ENCLOSURES, NATURAL GAS, whether OR not assembled, having 
BOTH of the following:
  (a) valve handles;
  (b) piping, 
with OR without pipe fittings

CLAMPS, FLOWLINE RESTRAINT, SUBSEA, OIL AND/OR GAS

MEDIUM DENSITY FIBREBOARD AND/OR PARTICLE BOARD COOLING UNIT, 
including BOTH of the following:
  (a) board pusher;
  (b) cooling turner,
with OR without the following:
        (i) roller AND/OR belt conveyors;
       (ii) controls

CLEANING MACHINES, PRINTED CIRCUIT BOARD AND/OR STENCIL

RECORDERS, LASER BEAM, DIGITAL VERSATILE DISC (DVD)

PIPETTING KITS, consisting of ALL of the following:
  (a) single AND/OR multi-channel pipettes;
  (b) pipette tips;
  (c) stands AND/OR racks,
with OR without reservoirs

DIBBLE UNITS, PROPAGATION SYSTEM

ROW SEEDERS, having a production capacity of NOT greater than 
2 400 rows per hour

ROW DRILL UNITS, PROPAGATION SYSTEM

STEM EXTENSION ASSEMBLIES, telescopic, whether or NOT assembled, 
including NOT less than ANY fifteen of the following:
  (a) cap tops;  
  (b) marker flags;
  (c) boundary caps;
  (d) marking plates;
  (e) position indicators;
  (f) inner protecting tubes;
  (g) outer protecting tubes;
  (h) wiping rings;
  (i) sliding plates;
  (j) bell tubes;
  (k) fixing wrap bands;
  (l) square bars;
  (m) square tubes;
  (n) double sided span riders;
  (o) springs;
  (p) foam seals;
  (q) tube connector tops;
  (r) tube connector bottoms;
  (s) adapters;
  (t) square connectors;
  (u) closure cups;
  (v) centring plates;
  (w) coupling sockets;
  (x) coupling modules

BIOLOGICAL SAMPLE PROCESSING MACHINES, including ALL of the 
following:
  (a) filtration;
  (b) membrane chromatography apparatus;
  (c) mixer AND/OR pump,
with OR without EITHER of the following:
        (i) sensor AND/OR probe;
       (ii) flow cell

VENDORS, CONFECTIONERY

CLEANERS, HEAT EXCHANGER AND/OR CONDENSER TUBES, on-line,
 having ALL of the following:
   (a) NOT less than one strainer screen;
   (b) ball re-circulation pump;
   (c) ball collector

CARRIAGE TOOLS, WIRELINE, including ALL of the following:
  (a) wheels;
  (b) bearings;
  (c) lubrication bath

COMBINED TAPPING MACHINES, hydraulic, including ALL of the 
following:
  (a) clay gun having ALL of the following:
           (i) safety clay fill-in flap;
          (ii) wear resistant clay barrel;
         (iii) electrical plugging volume indicator;
          (iv) plugging pressure NOT greater than 60 bar,
  (b) hydropneumatic drill unit having ALL of the following: 
           (i) drill hammer;
          (ii) drill mast;
         (iii) feeding force NOT greater than 20 kN,
  (c) travel trolley having a speed of NOT less than 5 m per
      minute and NOT greater than 20 m per minute;
  (d) hydraulic station having ALL of the following:
           (i) hydraulic pump;
          (ii) tank;
         (iii) valves,
  (e) hydraulic accumulator bank;
  (f) hydraulic cooler;
  (g) purging AND greasing cabinet;
  (h) flexible energy cable AND hose system;
  (i) electrical control system with programmable logic   
      controller,
with OR without machine support rails

SILO SYSTEMS, CORROSIVE POWDER, unassembled, having ALL of the 
following:
  (a) oscillating beam floor; 
  (b) first-in-first-out discharge system;
  (c) stainless steel AISI 904L inner walls;
  (d) trapezoidal steel exterior walls with closed air pockets;
  (e) diagnostic control system;
  (f) hopper;
  (g) nozzles;
  (h) silos with cojoined cells

MAT DIVIDERS, PANEL BOARD PRODUCTION, including ANY of the 
following:
  (a) forming line gantry with cross beam AND rails; 
  (b) trimming unit movable carriage;
  (c) motorised spindles;
  (d) position encoders

CLEANING UNITS, STEEL CONVEYOR BELT, having ALL of the following:
  (a) crossbeam with cleaning carriage tracks;
  (b) cleaning carriage with castors AND rollers;
  (c) drive units;
  (d) pneumatic turning levers AND cleaning brushes;
  (e) extraction hoods;
  (f) energy drag chain;
  (g) junction box AND proximity switches;
  (h) pneumatic connection plate with valves AND piping

MAT COMPACTORS, particle board AND/OR medium density fibre 
board, having BOTH of the following:
  (a) working width NOT greater than 2 600 mm;
  (b) board thickness NOT greater than 50 mm

LASER PROCESSING MACHINES, REACTIVE AND NON-REACTIVE POWDER, 
having ALL of the following:
  (a) welded frame;
  (b) fibre laser AND 3-axis scanning system;
  (c) dynamic recoating system;
  (d) integrated filter module

FLAT BED APPLICATORS, electrically AND/OR air operated, having 
ALL of the following:
  (a) tempered glass top;
  (b) self-healing cutting mat;
  (c) glide beam having roll holder;
  (d) side pockets;
  (e) table width NOT less than 1.4 m and NOT greater than 2.1 m;
  (f) table length NOT less than 2.8 m and NOT greater than 4.7m,
with OR without ANY of the following:
          (i) heat rollers;
         (ii) LED illumination;
        (iii) electrically operated height adjustment

WASTE PROCESSING SYSTEM, programmable logic controlled, having 
ALL the following:
  (a) vacuum pump;
  (b) stainless steel dust filter;
  (c) sealed chamber;
  (d) throughput NOT less than 100 litres per cycle

PLASTIC BOTTLE RECYCLING AND SORTING AND SEPARATING LINE, 
having ALL of the following:
  (a) ferrous metal separators;
  (b) bottle constant feeder;
  (c) weight dosing units having BOTH of the following:
           (i) load cells;
          (ii) conveyor belt,
  (d) eddy current inductive sorters;
  (e) disk spreaders;
  (f) near infra-red (NIR) detectors AND sorters, with OR
      without EITHER of the following:       
           (i) gangways; 
          (ii) sloping belts,
  (g) acceleration belts, with OR without hoppers;
  (h) polyethylene terephthalate (PET) tray detectors 
      AND separators;
  (i) dry de-labellers having two OR more of the following:
           (i) hoppers;
          (ii) support structures;
         (iii) ladders;
          (iv) feed conveyor belts;
           (v) gangways,
  (j) ballistic separators, with OR without feed conveyor 
      belts;
  (k) metal detectors;
  (l) electrical controls;
  (m) valves,
with OR without ANY of the following:
           (i) piping;
          (ii) pipe fittings;
         (iii) cables;
          (iv) cable ways

SPACER AND/OR PAD APPLICATORS, GLASS SHEET, automatic, with OR 
without butyl coater AND/OR frame labeller

PRESSES, INSULATING GLASS UNITS, with gas filling AND/OR 
assembly system

MATERIAL RECYCLING GRANULATION PLANT,  assembled OR unassembled, 
being ANY of the following:
  (a) super chopper having ALL the following:
         (i) maximum input capacity NOT less than 25 tonnes    
            per hour;
         (ii) rotor length NOT less than 2 100 mm;
        (iii) rotor speed rating NOT less than 5 and NOT greater 
              than 30 revolutions per minute;
         (iv) static AND flying knives;
         (v) oil-cooled motors;
         (vi) screening bars,
  (b) raspers having ALL the following:
          (i) maximum input capacity NOT less than 12 tonnes 
              per hour;
         (ii) rotor length NOT less than 1 600 mm;
        (iii) rotor speed rating NOT greater than 125
              revolutions per minute;
         (iv) static AND flying knives
  (c) fine granulators, having ALL the following:
          (i) maximum input capacity NO less than 4.5 tonnes 
              per hour;
         (ii) rotor length  NOT less than 1 425 mm;
        (iii) rotor speed rating NOT greater than 460
              revolutions per minute;
         (iv) static AND flying knives
  with OR without ANY of the following:
  (d) feeders;
  (e) pneumatic conveyors AND/OR vibratory AND/OR belt AND/OR   
      screw type with OR without cooling AND/OR 
      swivelling capacity;
  (f) over-band OR drum type magnets;
  (g) electrical controls;
  (h) storage silos AND/OR discharge collection;
  (i) being static OR mobile service platforms;
  (j) spark detection system

ROBOTS, autonomous, quadruped, with OR without ANY of the 
following:
  (a) autonomy payload;
  (b) expansion payload;
  (c) sensors;
  (d) docking station;
  (e) controller;
  (f) batteries;
  (g) battery charger;
  (h) cables

EGG TRAY AND PALLET WASHERS, having ALL of the following:
  (a) tray throughput NOT greater than 6 500 per hour;
  (b) pallet AND divider throughput NOT greater than 
      100 per hour;
  (c) double level washing;
  (d) internal stacker;
  (e) spin dryer;
  (f) air knife;
  (g) pumps;
  (h) filters;
  (i) v-jet nozzles

RECYCLED POLYETHYLENE TEREPHTHALATE FLAKES SANITISING PLANT, 
including ALL of the following:
  (a) turbo washers with OR without one OR both of the following:
         (i) support structures;
        (ii) gangways,
  (b) sloping screws;
  (c) pre-wash AND floatings separation troughs;
  (d) drain screws;
  (e) friction wash compact stations;
  (f) rinsing separation troughs; 
  (g) chemical dosing units;
  (h) centrifuges with OR without sound reducing enclosures;
  (i) driers with OR without sound reducing enclosures;
  (j) insulated water tanks with pumps;
  (k) heat exchangers;
  (l) rotating disc filters;
  (m) rotational decanter filtration units

RECYCLED POLYOLEFIN RECOVERY LINE, having ALL of the following:
  (a) sloped screws;
  (b) floating decantation troughs;
  (c) drainage screws;
  (d) centrifuges, with OR without sound reducing enclosures;
  (e) driers, with OR without sound reducing enclosures;
  (f) label separators;
  (g) pneumatic conveyors

RECYCLED PLASTIC RECOVERY LINE, having ALL of the following:
  (a) buffers;
  (b) sloped conveyor belts;
  (c) bailing presses

RECYCLED POLYETHYLENE TEREPHTHALATE FLAKE IMPURITY REMOVAL LINE, 
including ALL of the following:
  (a) dust removers;
  (b) flake sorters AND detectors, with OR without ANY of the 
      following:
             (i) feeding hoppers;
            (ii) material recirculating units;
           (iii) support frames,
  (c) unloading modules having BOTH of the following:
             (i) conveying augers;
            (ii) hoppers,
  (d) sloping screws

WASHING MACHINES, WOOD CHIP, programmable logic controlled, 
including ALL of the following:
  (a) chip flume;
  (b) pumps;
  (c) screw drainer;
  (d) screw conveyors;
  (e) cyclones;
  (f) rotary screen;
  (g) bolts;
  (h) low voltage motor control centre;
  (i) operator AND machine interface control unit;
  (j) emergency stop AND/OR alarm units;
  (k) junction box,
with OR without ANY of the following:
         (i) scrap draining unit;
        (ii) motors;
       (iii) frequency converters

WINDING MACHINES, PLASTIC PIPE AND/OR HOSE AND/OR PROFILE, 
having ALL of the following:
  (a) pneumatic pipe press-on device;
  (b) length counter;
  (c) transport rollers;
  (d) adjustable arms;
  (e) air cooler

SLITTING/REWINDING MACHINES, comprising ALL of the following:
   (a) rewinder;
   (b) unwinding station complete with soundproof cover and lifter;
   (c) core loader;
 capable of slitting rolls to a maximum width of 1 600 mm

INTERVENTION TOOLS, SUBSEA, OIL AND/OR GAS WELL, including ALL 
of the following:
  (a) hydraulic cylinder;
  (b) remotely operated vehicle panel;
  (c) remotely operated vehicle handle;
  (d) clamp bracket;
  (e) retention blocks

ROCKET LAUNCHING SYSTEM, having ALL of the following:
  (a) tower;
  (b) stand AND/OR pad;
  (c) ground station AND/OR mechanical ground support equipment,
with OR without EITHER of the following:
         (i) filling ground supply unit; 
        (ii) tank

INSULATING GLASS LINE, programmable logic controlled, comprising 
ALL of the following:
  (a) loading stations;
  (b) transport stations;
  (c) inspection stations;
  (d) mounting stations;
  (e) washing and drying stations;
  (f) sealing robots;
  (g) robot super spacers;
  (h) presses;
  (i) measurers

EDDY CURRENT SEPARATORS, INCINERATOR BOTTOM ASH, assembled OR 
unassembled, including ALL the following: 
  (a) belt conveyor;
  (b) splitter box;
  (c) sliding plates;
  (d) tracking sensors;
  (e) belt scraper,
with OR without any one OR more of the following:
         (i) discharge chutes;
        (ii) vibratory feeders;
       (iii) feed conveyors

BALLISTIC WASTE SEPARATOR, INCINERATOR BOTTOM ASH, assembled OR 
unassembled, including ALL of the following:
  (a) casings;
  (b) conveyors;
  (c) rotors;
  (d) slide plates;
  (e) access stairs;
  (f) service landings

RECYCLED PLASTIC BOTTLE DE-LABELLING MACHINES, being one OR both 
of the following:
  (a) label remover machines having ALL of the following:
         (i) hoppers;
        (ii) support structures;
       (iii) ladders,
  (b) stage classifier machines having ALL of the following:
         (i) conveyors;
        (ii) ventilators;
       (iii) bag filters;
        (iv) air silencer;
         (v) support structures

CREELS, CABLE SPOOL, CONVEYOR BELT MANUFACTURING LINE, having a 
spool width NOT less than 350 mm

LET-OFF STATION, CONVEYOR BELT MANUFACTURING LINE

WIND UP STATIONS, CONVEYOR BELT MANUFACTURING LINE

UNBALANCED ROTOR TURNING TOOL, ROTATING GEARBOX AND HUB 
ASSEMBLY, WIND TURBINE BLADE INSTALLATION, including ALL of the 
following:
  (a) motor assembly drive unit including BOTH of the following:
         (i) mounting frame assembly;
        (ii) hydraulic motors,
  (b) hydraulic pump unit;
  (c) planetary gear assemblies;
  (d) transport AND/OR storage frame

VISUAL INSPECTION MACHINES, FILLED GLASS SYRINGE, programmable 
logic controlled, having ALL of the following:
  (a) transport speed NOT greater than 6 000 pieces per hour;
  (b) rotation speed NOT greater than 2 000 rpm;
  (c) light source;
  (d) magnifying lens

WORKSTRING DEPLOY TOOLS, having ALL of the following:
  (a) lockable mechanism;
  (b) bearing;
  (c) clutch;
  (d) rotary connections;
  (e) splines;
  (f) sliding sleeve

CRATE UNFOLDING MACHINES, GROCERY, programmable logic 
controlled, with OR without conveyors, including ALL of the 
following:
  (a) crate recognition station;
  (b) clips control station;
  (c) crate ejection station;
  (d) crate opening station

CRATE CLOSING AND FOLDING MACHINES, GROCERY, programmable logic 
controlled, with OR without conveyors

SAMPLE INPUTTING AND SORTING SYSTEM, having BOTH of the 
following:
  (a) sample turner;
  (b) de-capper

DEBLISTERING MACHINES, MEDICINE BLISTER PACK, press out, 
motorised, including at least FOUR of the following: 
  (a) press-out cassettes;
  (b) press-out rollers;
  (c) chutes;
  (d) draws AND/OR trays AND/OR bins;
  (e) stainless steel sieve;
  (f) magazine AND/OR blister holder;
  (g) brushes;
  (h) adjustable wheels AND/OR space rings;
  (i) control panel AND/OR touch screen;
  (j) tape roller;
  (k) counting AND filling unit;
  (l) dust collection system;
  (m) trolley;
  (n) wheels

FABRICATION AND TEST STANDS, SUBSEA, with OR without goose neck

BIOMASS PELLET PLANT, including ALL of the following:
  (a) cyclones AND/OR hoppers; 
  (b) screw conveyors;
  (c) pellet mill infeed;
  (d) ring dies;
  (e) rollers

GLASS LAYER PAD WASHING MACHINES, programmable logic controlled, 
including ALL of the following: 
  (a) layer pad feeding unit;
  (b) loading unit;
  (c) washing unit;
  (d) rinsing unit;
  (e) drying unit

DEBLISTERING MACHINES, MEDICINE BLISTER PACK, motorised, 
including ALL of the following: 
  (a) rollers;
  (b) twin track feeder;
  (c) recovery tray;
  (d) feeder magazine;
  (e) wheels;
  (f) control panel;
  (g) adhesive tape rollers;
  (h) adhesive tape;
  (i) chutes

DISPENSERS, ICE

SORTING SYSTEM, GLASS CULLET RECYCLING PLANT, including ALL of 
the following:       
  (a) ceramic AND stone AND porcelain optical sorters;      
  (b) vibratory screens;      
  (c) vibratory tray feeders;      
  (d) vibratory feeders;     
  (e) two way diverter;      
  (f) maximum filling level indicator;       
  (g) belt conveyor;      
  (h) bucket elevators;      
  (i) transfer chutes with OR without supporting 
      structures

LABEL REMOVING MACHINES, GLASS CULLET RECYCLING PLANT, including 
BOTH of the following:
  (a) label remover;
  (b) transfer chutes AND supporting structures

ELECTROMAGNETIC VIBRATORS, with OR without ANY of the following:
  (a) silence blower with silence box;
  (b) vertical head expander;
  (c) slip table;
  (d) vibration control system;
  (e) accelerometers AND cables

COATING HOOD, HOT END, GLASS CONTAINER, programmable logic 
controlled, including ALL of the following:
  (a) hood frame;
  (b) bottle detector;
  (c) circulating blowers;
  (d) cooling blower;
  (e) exhaust unit;
  (f) finish protection unit including BOTH of the following:
         (i) air blower; 
        (ii) mid-section,
  (g) flow meter;
  (h) heating unit;
  (i) regulating valves;
  (j) slot plates;
  (k) temperature control,
with OR without ANY of the following:
         (i) lifting device;
        (ii) air knife;
       (iii) suction lance;
        (iv) central feeding unit

PLASMA COATING MACHINES, PLASTIC PACKAGING, including BOTH 
of the following:
  (a) vacuum operated;
  (b) single OR multiple reactors

VINYL WRAPPING MACHINES, 3D SURFACE FINISHING

SEPARATORS, magnetic, having ALL of the following:
  (a) overfed magnetic drum;
  (b) eddy current separator;
  (c) vibratory feeder;
  (d) material discharge hood with adjustable splitter AND
      inspection hatches;
  (e) electrical control cabinet

ADSORBTION AND OXIDATION PLANT, STEEPING WATER, including ALL of 
the following:  
  (a) columns;
  (b) filters AND/OR ceramic granules;
  (c) pumps;
  (d) pumping platform;
  (e) piping;
  (f) ozone generator;
  (g) oxygen generator

MUSHROOM SUBSTRATE PRODUCTION PLANT, having ALL of the following:
  (a) substrate mixer having BOTH of the following:
          (i) steel inner shell;
         (ii) welded outer shell,
  (b) conveyor;
  (c) rotary feeder;
  (d) intake filter;
  (e) auger dosing unit;
  (f) water pumps;
  (g) control cabinets;
  (h) valves

LABORATORY WATER SAMPLE PROCESSING MACHINES, METAL AND NON-METAL 
CONTAMINATES LINE, programmable logic controlled, including ALL 
of the following:
  (a) bar code readers;
  (b) de-capper;
  (c) shakers AND mixers;
  (d) aliquoter;
  (e) acid doser;
  (f) filter

SAMPLE TAKING SYSTEM, FEEDMILL, consisting of ALL of the 
following:
  (a) sample takers;
  (b) buffer stations;
  (c) transport station with cyclone;
  (d) sample carousel

RECYCLED PLASTIC SORTING AND SEPARATING LINE, including ALL of 
the following: 
  (a) near infra-red detectors AND sorters; 
  (b) accelerator belts;
  (c) hoppers;
  (d) separation chambers; 
  (e) conveyor belts;
  (f) constant feeders;
  (g) disk screens;
  (h) aeraulic separators;
  (i) support structures, 
with OR without electrical controls AND fittings

DE-LABELLING AND DRYING MACHINES, having ALL of the following:
  (a) rotary drum;
  (b) rock wool AND sheet metal cladding;
  (c) chromium carbide lining

RECIRCULATION AQUACULTURE SYSTEM, LAND BASED FISH FARM, having 
ALL of the following:
  (a) recirculation system including ALL of the following:
          (i) pumps;
         (ii) valves;
        (iii) pipes,  
  (b) mechanical filtration;
  (c) biological filtration;
  (d) degassing;
  (e) disinfection;
  (f) oxygenation system including ALL of the following:
          (i) cones;
         (ii) pumps;
        (iii) diffusors;
         (iv) manifolds;
          (v) cabinets,  
  (g) pH regulation;
  (h) temperature regulation; 
  (i) fish feeding;
  (j) intake treatment;
  (k) waste treatment;
  (l) monitoring AND control

IMPURITY REMOVAL LINE, RECYCLED PLASTIC FLAKE, including ALL of 
the following:
  (a) dust removers;
  (b) unloading system with augers AND hoppers;
  (c) flake sorters;
  (d) pneumatic conveyors;
  (e) support structures
with OR without electrical controls AND fittings

WASHING LINE, RECYCLED PLASTIC FLAKES, including ALL of the 
following:
  (a) turbo washers;
  (b) service tanks;
  (c) sloping screws;
  (d) friction wash compact stations;
  (e) rinsing AND decantation troughs;
  (f) drainage screws;
  (g) extraction screws;
  (h) centrifuges;
  (i) driers;
  (j) insulated water tanks with pumps;
  (k) heat exchangers;
  (l) rotating disc filters with water collection tanks;
  (m) support structures AND gangways
with OR without electrical controls AND fittings

WASHING AND RINSING AND DRYING LINE, RECYCLED PLASTIC FLAKE, 
including ALL of the following: 
  (a) batch hot washing station;
  (b) rinsing station;
  (c) drying station having a mechanical drying centrifuge

PLASTIC BOTTLE RECYCLING AND SORTING AND SEPARATING LINE,
having ALL of the following:
  (a) ferrous metal separators;
  (b) bottle constant feeder;
  (c) weight dosing units having BOTH of the following:
          (i) load cells;
         (ii) conveyor belt,
  (d) eddy current inductive sorters;
  (e) disk spreaders;
  (f) near infra-red (NIR) detectors AND sorters, with OR 
      without EITHER of the following:
          (i) gangways;
         (ii) sloping belts,
  (g) acceleration belts, with OR without hoppers;
  (h) polyethylene terephthalate (PET) tray detectors AND
      separators;
  (i) dry de-labellers having two OR more of the following:
          (i) hoppers;
         (ii) support structures;
        (iii) ladders;
         (iv) feed conveyor belts;
          (v) gangways,
  (j) ballistic separators, with OR without feed conveyor belts;
  (k) metal detectors;
  (l) valves,
with OR without ANY of the following:
          (i) piping;
         (ii) pipe fittings;
        (iii) cables;
         (iv) cable ways;
          (v) electrical controls

TEST AND/OR FLUSHING UNITS, INJECTION VALVES, SUBSEA OIL 
AND/OR GAS WELLS

SEPARATORS, WASTE MATERIAL, air, having ALL of the following:
  (a) zig zag sifting channel;
  (b) fan;
  (c) material output with rotary valve;
  (d) input feed tunnel;
  (e) output chute

WASHING AND DRYING MACHINE, COPPER ALLOY PLUMBING FITTING, 
programmable logic controlled, having a drum

CLEANING VEHICLES, submersible, remote controlled, track OR 
wheel mounted, having ANY of the following:
  (a) rotating brushes OR auger;
  (b) cameras;
  (c) pumps;
  (d) motors;
  (e) discharge hose;
  (f) ladder with winch;
  (g) floating cable

COATERS, CAN RIM, programmable logic controlled, including ALL 
of the following:
  (a) coating unit, including coating delivery module;
  (b) conveyor;
  (c) metering roll coater;
  (d) ultra-violet curing unit with light shield;
  (e) fans;
  (f) filtration unit;
  (g) wiring looms;
  (h) coating hose module

LAYER BOARD SORTING AND INSPECTING AND CONVEYING LINE, 
programmable logic controlled, having ALL of the 
following:
  (a) pallet loading AND/OR rotating AND/OR tilting
      station;
  (b) manual inspection AND/OR feeding station;
  (c) pallet stacker;
  (d) pallet de-stacker;
  (e) sorting AND/OR rejection station;
  (f) pad AND/OR top frame stacker;
  (g) operating stacking speed NOT greater than 
      1 201 layer boards per hour

SUBSEA WELLHEAD CUTTING SYSTEM, inlcuding ALL of the 
following:
  (a) hydraulic motor;
  (b) wellhead connector;
  (c) mechanical cutter

RECYCLED POLYETHYLENE TEREPHTHALATE FLAKES SANITISING PLANT, 
including ALL of the following:
  (a) turbo washers with OR without ANY of the following:
         (i) support structures;
        (ii) gangways,
  (b) sloping screws;
  (c) pre-wash AND floatings separation troughs;
  (d) drain screws;
  (e) friction wash compact stations;
  (f) rinsing separation troughs; 
  (g) chemical dosing units;
  (h) driers with OR without soundproof boxes;
  (i) insulated water tanks with pumps;
  (j) heat exchangers;
  (k) rotating disc filters;
  (l) rotational decanter filtration units,
with OR without centrifuges

SCRAP HANDLING PLANT, having ALL of the following:
  (a) chopper fan with adjustable inlet AND motor;
  (b) balance fan with inverter;
  (c) air separator having ALL of the following: 
         (i) drop chute;
        (ii) support frame;
       (iii) outlet fabrication,
  (d) oil separator;
  (e) fan AND/OR separator outlet fabrication;
  (f) vibration mounts;
  (g) air bleed valve;
  (h) baler in-feed chute;
  (i) ducting having ALL of the following:
         (i) bends;
        (ii) clips;
       (iii) seals;
        (iv) supports, 
  (j) trimmer connection stands including metal flex AND 
      trimmer connection square; 
  (k) control panel,
with OR without ANY of the following:
          (i) oil mist unit;
         (ii) ink mist unit;
        (iii) wiring;
         (vi) outlet silencer AND/OR slide valve

MEDICAL PATHOLOGY SAMPLE PREPARATION AND HANDLING EQUIPMENT, 
being ANY of the following:
  (a) de-capper modules;
  (b) aliquot modules

TOILETS, gas operated, incinerating

SETTING TOOLS, PLUGS AND/OR PACKERS AND/OR GAUGE HANGERS, OIL 
AND/OR GAS WELL, with OR without ANY of the following:
  (a) adapters;
  (b) power communication modules;
  (c) test AND/OR opening AND/OR closing AND/OR programming tools

TAP HOLE MANIPULATORS, SOLIDS AND DEBRIS REMOVAL

FRICTION CLEANERS, PET BOTTLE, having ALL of the following:
  (a) collecting container with pump AND blower AND pipe;
  (b) product AND waste material separator;
  (c) washing AND cleaning system;
  (d) separation AND sorting system, with OR without optical 
sorters;
  (e) dosing stations;
  (f) electrical controls

BEND STIFFENERS, SUBSEA OIL AND GAS, including male connector

VENTILATORS AND/OR COOLERS, heat recovery, with OR without 
ducting, having ALL of the following:
  (a) heating AND/OR cooling coils;
  (b) condensate tray;
  (c) condensate pump;
  (d) sensors;
  (e) fans;
  (f) heat exchanger;
  (g) remote data monitoring;
  (h) wall controller;
  (i) two-way ventilation

METAL COATING MACHINE, having ALL of the following:
  (a) direct infeed conveyor;
  (b) production speed NOT greater than 6 500 sheets/hr;
  (c)maximum power output NOT greater than 34 kW;
  (d) anti-flecking unit output NOT greater than 5 kW

CUTTING MACHINES, LEATHER AND/OR FABRIC, having working area NOT
less than 3 000 mm x 3 000 mm, independent arms with multi-tool 
heads, having ALL of the following:
  (a) blades;
  (b) pens;
  (c) dies;
  (d) punches

ALUMINIUM AND OR STEEL SEPERATORS, wire AND/OR cable AND/OR 
conductor, capable of cutting, WITH electric drive

MATERIAL SEPARATORS, including airlaid materials, having ALL of 
the following:
  (a) rotary valve inlet;
  (b) fan;
  (c) light material output; 
  (d) heavy material output

PISTON ASSEMBLY LINE, RELIEF VALVES, programmable logic 
controlled, including ALL of the following:
  (a) bowls;
  (b) linear tracks;
  (c) hopper

THERMAL LAMINATING MACHINES, two sided sheet, 
maximum operating speed NOT greater than 50 m / min, having ALL 
of the following:
  (a) feeder with pile height NOT greater than 1.1 m; 
  (b) embossing roller;
  (c) stacker;
  (d) cross cutter;
  (e) temperature control units;
  (f) vibrating jogger unit; 
  (g) walkways;
  (h) pumps;
  (i) hoses;
  (j) perfector;
  (k) paper weight NOT less than 115 gsm and NOT greater than 
      650 gsm

PROCESSING SYSTEM, FUSION, ORE SAMPLE PREPARATION, programmable 
logic controlled, including ALL of the following:
  (a) input tray magazine;
  (b) dosing module;
  (c) fusion module;
  (d) cleaning module

FEEDING SYSTEM, WASTE PAPER, including ALL of the following:
  (a) apron conveyors;
  (b) bale tipper;
  (c) cutting AND dewiring station;
  (d) outlet chute

ROBOTIC TAGGING APPLICATION LINES, steel products, whether OR 
not assembled, including ALL of the following:  
  (a) multi-axis robots; 
  (b) gantries; 
  (c) carriages;
  (d) pin dispensers;
  (e) tagging heads;
  (f) stud welding units;
  (g) vision and reading systems, being pin positioning sensors
      and label code readers;
  (h) paint marking systems;
  (i) control cabinets;
  (j) interconnecting cables and hoses;
  (k) environmentally conditioned containers for control panels
      and cabinets

WINDROW TURNERS, self-propelled, having ALL of the following:
  (a) rotor length NOT less than 4 m; 
  (b) maximum throughput NOT less than 4 000 m3/hr;
  (c) self-propelled drive with engine NOT less than 205 kw; 
  (d) hydraulically raised cab positioned in the middle of the 
machine

SECURITY GATES, PEDESTRIAN, 240 V, comprising BOTH of the
 following:
   (a) reverse action;
   (b) visual and audible alarm signals

AIR CONDITIONER SERVICE MACHINES, AUTOMOTIVE

RECYCLED PLASTIC WASHING LINE, including ALL of the following: 
  (a) pre-wash stirrer AND/OR pre-washing tank;
  (b) wet grinding unit including ALL for the following:
          (i) wet grinders;
         (ii) dewatering screw;
        (iii) washing centrifuge,
  (c) separation tank OR floating tank OR hydro cyclones; 
  (d) mechanical driers;
  (e) thermal driers; 
with OR without ANY of the following:
          (i) shredders;
         (ii) water filtration modules; 
        (iii) conveyors

DETONATORS, TIMING MODULE ASSEMBLY LINE, programmable logic 
controlled, including ALL of the following:
  (a) printed circuit boards station, including ALL of the 
      following:
          (i) unloading from trays;
         (ii) separation;
        (iii) positioning,
  (b) fuse head station, including ALL of the following: 
          (i) loading;
         (ii) earth spike placement; 
        (iii) laser soldering,
  (c) testing station;
  (d) silicon sleeving station, including BOTH of the following:
          (i) cutting;
         (ii)shrinking,
  (e) earth spike bending station;
  (f) packing station

BOLT TENSIONERS, HYDRAULIC, trolley mounted, including ALL of 
the following: 
  (a) wrenches;
  (b) hydraulic and electric motor driven pump;
  (c) guideplates

SPOOLING MACHINES, programmable logic control, including ALL of 
the following:
  (a) single head;
  (b) traverse mechanism;
  (c) web width NOT less than 19 mm and NOT greater than 55 mm;
  (d) spool diameter NOT greater than 720 mm;
  (e) spool width NOT greater than 380 mm;
  (f) rewind core diameter NOT greater than 152 mm;
  (g) casing thickness NOT greater than 50 microns;
  (h) line speed NOT less than 80 metres and NOT greater than 
160 metres per minute;
  (i) accumulator;
  (j) variable speed drives;
  (k) geared motors

CLEANING MACHINES, self-propelled, battery operated, including 
ALL of the following:
  (a) battery power NOT less than two hours; 
  (b) coverage NOT exceeding 1 600 square metres per hour; 
  (c) travelling speed NOT exceeding 40 metres per minute;
  (d) remote operation NOT exceeding 200 metres;
  (e) sensors;
  (f) brushes;
  (g) camera;
  (h) lights;
  (i) two caterpillar tracks;
  (j) traverses gaps NO greater than 70 cm

CLEANING MACHINES, SOLAR FARMS, self-propelled, battery 
operated, including ALL of the following:  
  (a) battery power NOT less than 8 hours; 
  (b) coverage NOT exceeding 6 000 square metres per hour;  
  (c) travelling speed NOT exceeding 40 metres per minute

HYDRAULIC TENSIONERS, SUBSEA, having ALL of the following:
  (a) 2 vertically mounted track carriages;
  (b) continuous line pull NOT greater than 10 t;
  (c) grip force NOT greater than 84 t; 
  (d) operating pressure NOT greater than 250 bar, 
with OR without hydraulic power unit

PHARMACEUTICAL HANDLING AND SORTING MACHINES, programmable logic 
controlled, with OR without buffer belt, including BOTH of the 
following: 
  (a) input capacity NOT greater than 200 packages per hour; 
  (b) bar-code reader

DOSING SYSTEM, having ALL of the following:
  (a) stainless chrome nickel steel housing;
  (b) dosing screw;
  (c) agitator with bayonet connection;
  (d) detachable extraction unit;
  (e) frequency controlled geared motor;
  (f) gravimetric OR volumetric dosing

DE-SOILING AND/OR PORCUPINE MACHINES, DRY POTATOES, with OR 
without input AND/OR output conveyors, having ANY of the 
following:
  (a) inverter drive;
  (b) limit roller;
  (c) actuators

CLEANING SYSTEM, LASER, with OR without any of the following 
  (a) water AND/OR air cooling device; 
  (b) power measurement and optics adjustment tool; 
  (c) control unit

DE-SOILING MODULES, DRY POTATOES, with OR without input AND/OR 
output conveyors, having ANY of the following:
  (a) porcupine machines;
  (b) sieve belts;
  (c) safety sensors;
  (d) inverter drives;
  (e) limit roller;
  (f) actuators;
  (g) waste funnels;
  (h) axial remover;
  (i) main drives

DOSING SYSTEM, EXTRUSION LINE, unassembled, having ALL of the 
following:
  (a) hoppers with integrated supports;
  (b) bulk bag frames;
  (c) pneumatic loading device;
  (d) vacuum pumps;
  (e) level switches;
  (f) loading cells;
  (g) valves; 
  (h) extrusion screw;
  (i) screw conveyor;
  (j) motor with gearbox;
  (k) control cabinet;
  (l) support structure

LOADING AND ASSEMBLY LINES, ELECTRONIC DETONATOR, including ALL 
of the following:
  (a) manual OR automated loading AND unloading harness line, 
including ALL of the following:
          (i) carriers;
         (ii) safety screen;
        (iii) conveyor;
         (iv) indicator lamps;
          (v) lighting,
  (b) electronic initiation line, including ALL of the 
following:
          (i) indexing station;
         (ii) stacking AND de-stacking modules;
        (iii) conveyor;
         (iv) trays,
  (c) soldering unit, including ALL of the following:
          (i) safety switch;
         (ii) lock gate doors;
        (iii) sensors;
         (iv) control panel;
          (v) media cabinet;
         (vi) filter box;
        (vii) cooler;
       (viii) sensors;
         (ix) lights,
  (d) detonator assembly line, including ALL of the following:
          (i) 3D optical inspection line;
         (ii) crimping stations;
        (iii) tray feed AND handling station;
         (iv) camera

FLUORESCENT GLOBES AND TUBES SEPARATING MACHINES, including ALL 
of the following:
  (a) vibration feeders;
  (b) sieves;
  (c) transport augers;
  (d) tumbler;
  (e) fans;
  (f) filters;
  (g) power cyclone;
  (h) metal sorter;
  (i) magnetic separator;
  (j) powder collection distiller barrel

INSPECTION MACHINE, BAKED FOOD PRODUCTS, including ALL of the 
following:
  (a) processor control unit;
  (b) 3D camera head;
  (c) pneumatic rejection module;
  (d) conveyors

GARMENT FOLDING MACHINES

SEPARATORS, GLASS CONTAINER INSPECTION MACHINE, programmable 
logic controlled

METHANE DECOMPOSITION PROCESSING PLANT, including ALL of the 
following:
  (a) plasma torch;
  (b) carbon filter;
  (c) reactor vessel;
  (d) control cabinet;
  (e) power supply

THERMAL BREAK MACHINES, ALUMINIUM EXTRUSION, computer numerical 
control, including ALL of the following:
  (a) loading roller tables, including BOTH 2 m and 4 m in  
      length;
  (b) single step transfer NOT greater than 6.5 m in length;
  (c) double step storage NOT greater than 6.5 m in length;
  (d) motorised knurling machine;
  (e) motorised roll-forming machine;
  (f) polyamide insulation strip inserter

WASHING AND SEPARATING MACHINES, RECYCLING PLANT, including BOTH 
of the following:  
  (a) horizontal infeed conveyors;  
  (b) outfeed chute

GELLING MACHINES, programmable logic controlled, having ALL of 
the following;
  (a) feeding AND singulation AND orientation unit;  
  (b) 3 axis gantry;
  (c) connector integrity inspection station;
  (d) heater; 
  (e) injection station; 
  (f) cooling station; 
  (g) temperature inspection station; 
  (h) output conveyor

FILAMENT WINDER MACHINES, including ALL of the following:
  (a) primary AND secondary control system;
  (b) fibre delivery guide;
  (c) delivery rollers;
  (d) compaction roller;
  (e) fibre deflector;
  (f) resin impregnator;
  (g) resin integrator;
  (h) servo creel;
  (i) spindles;
  (j) tape dispenser WITH tensioner;
  (k) laser scanner;
  (l) data logger;
  (m) break splicer

EXOSKELETON, ALL BODY, with OR without power supply, including 
ANY of the following:
  (a) straps AND/OR harness;
  (b) pulleys; 
  (c) arm cuffs; 
  (d) belts;
  (e) frames

CLEANING MACHINES, FOOD MANUFACTURING, programmable logic 
controlled, including ALL of the following:
  (a) tanks NOT less than 2 000 litres;
  (b) pumps;
  (c) distribution valves with pneumatic drive head; 
  (d) piping

DOSING SYSTEM, BIOMASS, programmable logic controlled, 
unassembled, with OR without level measurement system, having 
ALL of the following:
  (a) hydraulic moving floor;
  (b) drive motors;
  (c) weighing system;
  (d) screw-conveyor system;
  (e) pump AND/OR liquid feed system

CAPSULE SORTERS AND/OR POLISHERS, having BOTH of the following:
  (a) capsule size handling NOT less than 00 and NOT greater 
      than 4;
  (b) processing capacity NOT greater than 300 000 capsules per
      hour

ACCUMULATORS, HYDRAULIC PISTON, including ALL of the following:
  (a) valves;
  (b) plate;
  (c) rings AND O-rings;
  (d) seals;
  (e) plug;
  (f) screws

KNIFE RING SHARPENING AND SETTING MACHINES, programmable logic 
controlled, including ALL of the following:
  (a) base frame with machine housing;
  (b) knife ring feeder;
  (c) bearing unit;
  (d) sharpening unit;
  (e) electronic torque wrench;
  (f) knife setting unit;
  (g) knife dressing unit;
  (h) frequency converter;
  (i) band filter gearmotor;
  (j) pump motors

ACCUMULATORS, HYDRAULIC PISTON, having ALL of the following:
  (a) working pressure NOT less than 20 MPa;
  (b) length NOT less than 2 000 mm;
  (c) diameter NOT less than 245 mm

SCRUBBER AND DRYER AND SWEEPER MACHINES, FLOOR, autonomous, 
motorised, including ALL of the following:
  (a) control panel;
  (b) distance sensors;
  (c) optical sensors;
  (d) warning beacon;
  (e) lithium-ion batteries;
  (f) brushes;
  (g) water tank; 
  (h) cleaning agent tank,
with OR without ANY of the following:
          (i) docking station;
         (ii) spot light

CONCRETE BATCHING PLANT, programmable logic 
controlled, including ALL of the following:
  (a) aggregate dosing system, including BOTH of the following:
          (i) bins;
         (ii) vibrators,
  (b) aggregate weighing hoppers;
  (c) moisture probes;
  (d) conveyor belts;
  (f) water dosing AND controls;
  (g) screw conveyor;
  (h) storage silos;
  (i) walkways;
  (j) valves;
  (k) aggregate aeration;
  (l) level indicators;
  (m) safety system;
  (n) control panels

DOUBLE MEMBRANE GAS DOME COVERS, BIOGAS SILO, unassembled, 
including ALL of the following:
  (a) double-sided PVC-lined polyester outer membrane;
  (b) double-sided PVC-lined polyester inner membrane;
  (c) protection net with fixing wire;
  (d) airflow system;
  (e) air blower;
  (f) rain skirt;
  (g) condensate reflector;
  (h) inspection window;
  (i) level meter;
  (j) hot galvanised steel pillar;
  (k) gas outlet;
  (l) supporting belt AND/OR rail structure

MOORING SYSTEM, VACUUM, having ALL of the 
following:
  (a) sway (Y) nominal holding force NOT greater than 400 kN;
  (b) surge (X) nominal holding force NOT greater than 200 kN;
  (c) maximum power NOT exceeding 32 kW;
  (d) operation environment NOT less than -25 degrees Celsius, 
and NOT greater than 50 degrees Celsius;
  (e) remote controlled

PIPE SAWING MACHINES, flexible pipe AND/OR umbilicals, modular, 
with OR without roller extensions

WASHER AND DRYER MACHINES, stand alone, programmable logic 
controlled, with OR without EITHER of the following: 
  (a) trolley; 
  (b) baskets

GEAR BOX ASSEMBLY MACHINES, including ALL of the following:
  (a) z-axis vertical undercarriage support guide;
  (b) z-axis lifting unit;
  (c) axis positioning unit;
  (d) implement tipping unit;
  (e) rotation unit;
  (f) control panel;
  (g) electrical cabinet;
  (h) hydraulic power unit;
  (i) pneumatic power unit;
  (j) pressing press;
  (k) measuring unit;
  (l) car bake wagon;
  (m) crown insertion assembly;
  (n) interface plates

LOADING AND ASSEMBLY LINES, ELECTRONIC DETONATOR, including ALL 
of the following: 
  (a) manual OR automated loading AND unloading wiring coil 
      line, including ALL of the following: 
          (i) carriers; 
         (ii) safety screen; 
        (iii) conveyor; 
         (iv) optical inspection module with lighting, 
  (b) electronic initiation line, including ALL of the
      following: 
          (i) indexing station; 
         (ii) stacking AND de-stacking modules; 
        (iii) conveyor,
  (c) wire alignment station, including BOTH of the following:
          (i) 3D inspections cameras;
         (ii) pneumatic positioning AND alignment modules,
  (d) connector applicator station, including ALL of the
      following:
          (i) conveyors;
         (ii) vibratory bowl with linear conveyor;
        (iii) pneumatic picking AND placement unit,
  (e) connector staking station, including BOTH of the following:
          (i) cable insertion module;
         (ii) 3D inspection cameras,
  (f) wire splaying station with inspection cameras;
  (g) electrical assembly loading station, including ALL of
      the following:
          (i) conveyors:
         (ii) rotary table;
        (iii) picking AND placement unit; 
         (iv) earth spike checking unit, 
  (h) soldering unit, including ALL of the following: 
          (i) safety switch; 
         (ii) lock gate doors; 
        (iii) CCTV inspection cameras;
         (iv) control panel; 
          (v) media cabinet;
         (vi) fume extractor;
        (vii) filter system;
       (viii) cooler; 
         (ix) sensors; 
          (x) lights, 
  (i) soldering optical inspection station, including
      BOTH of the following:
          (i) camera system;
         (ii) identification assigning module,
  (j) de-plater station, including ALL of the following:
          (i) manual detonator shell loading module;
         (ii) detonator de-trayer AND orientation module;
        (iii) feed conveyor,
  (k) crimping unit, including ALL of the following:
          (i) handling modules;
         (ii) depth probe;
        (iii) detonator applicator;
         (iv) indexing module;
          (v) crimper;
         (vi) camera,
  (l) number tagging station, including ALL of
      the following:
          (i) tag printer AND applicator;
         (ii) inspection camera;
        (iii) identification number, colour AND damage checking
              module,
  (m) connector greasing station, including BOTH of the 
      following:
          (i) grease injector;
         (ii) connector closing module,
  (n) de-staking station;
  (o) unloading AND packing station, including ALL of the 
      following:
          (i) work piece carrier picking robotic arms;  
         (ii) conveyor;
        (iii) packing module;
         (iv) faulty piece rejection shuttle

BAG EMPTYING MACHINES, POLYMER BEADS, including ALL of the 
following:
  (a) conveyors;
  (b) cutting unit;
  (c) discharge hopper

SCRAP DRAINER, WOOD CHIP, including ALL of the following:
  (a) ribbon screw;
  (b) tote bin;
  (c) shaft mounted gearboxes;
  (d) support legs;
  (e) platforms

WASHING MACHINES, WOOD CHIP, programmable logic control, 
including ALL of the following:
  (a) scrap separator;
  (b) pumps;
  (c) screw drainer;
  (d) surge bins;
  (e) cyclones;
  (f) rotary screen;
  (g) raw material chute;
  (h) screw feeder;
  (i) pre-heater;
  (j) defibrator with feeder;
  (k) water treatment unit;
  (l) blow valve;
  (m) blow line;
  (n) motor control centre,
with OR without EITHER of the following:
          (i) scrap draining unit;
         (ii) motors

SUBSEA THRUSTERS, hydraulic

CULVERT INSTALLATION GANTRY, self-propelled, having access ramps 
on two sides

ROTOR LOCKS, WIND TURBINE, whether OR not assembled, with OR 
without ANY of the following:
  (a) outer handle; 
  (b) inner handle;
  (c) puller tool;
  (d) lift tool;
  (e) lifting plate;
  (f) bolt caddy;
  (g) threaded rod AND nut

CLEANING MACHINES, battery operated, remotely controlled, having 
ALL of the following:
  (a) NOT greater than 800 square metres per hour cleaning 
      capacity;
  (b) NOT greater than 30 metres per minute travelling speed;
  (c) brushes;
  (d) NOT less than 2 tracks

CELLULOSE FIBRE MAT FORMING SYSTEM, including ALL of the 
following:
  (a) feed station;
  (b) weighing section;
  (c) lap former;
  (d) edge cutting system;
  (e) unwinder;
  (f) stairs;
  (g) walk way;
  (h) stairs AND platform protectors

CUTTING AND TRIMMING MACHINES, FIBRE MAT, including ALL of the 
following:
  (a) longitudinal AND cross cutting station;
  (b) belt conveyor;
  (c) silo including ALL of the following:
          (i) cyclone separator;
         (ii) dust extraction AND filtering devices;
        (iii) storage box

CLEAN-IN-PLACE SYSTEM, having ALL of the following:
  (a) NOT greater than 3 batch tanks;
  (b) NOT greater than 1 supply tank;
  (c) pumps;
  (d) heat exchanger;
  (e) touch screen control system;
  (f) control cabinets;
  (g) valves;
  (h) piping

CLAMPS AND/OR CONNECTOR ASSEMBLY, SUBSEA PIPELINE REPAIR, with 
OR without installation tool, whether OR not assembled

ATMOSPHERIC WATER GENERATORS, having a generation capacity NOT 
less than 25 litres per day, and NOT greater than 6 000 litres 
per day

ANCHOR TOOL ASSEMBLIES, OIL AND/OR GAS WELL PERFORATING GUN, 
downhole, whether OR NOT assembled, including ALL of the 
following:
  (a) gauge rings;
  (b) housing;
  (c) anchoring slips;
  (d) gun adaptor

FIRING HEADS, PERFORATING GUN, OIL AND/OR GAS WELL, whether OR 
not assembled, including ALL of the following:
  (a) shear pins;
  (b) pistons;
  (c) arming sleeve AND/OR release sleeve;
  (d) flow restrictors;
  (e) locking balls;
  (f) firing pin,
with OR without EITHER of the following:
           (i) seals;
          (ii) counting rings

COIL TUBING REEL, skid mounted, including ALL of the following:
  (a) roller bearings;
  (b) chain AND sprocket unit;
  (c) hydraulic motor

MILLS, CENTRIFUGAL, WOOD CHIP, including BOTH of the following:
  (a) vibrating feeder;
  (b) magnetic drum

CLEANING AND SPRAYING MACHINES, GREENHOUSE, including ALL of the 
following: 
  (a) uv resistant adjustable brushes; 
  (b) lights; 
  (c) dosing pump; 
  (d) power cables; 
  (e) spray booms; 
  (f) hose reels; 
  (g) high pressure hoses;  
  (h) cable reels

CLEANING MACHINE, hydraulic controlled, driver operated, 
including ALL of the following:
  (a) umbilical connection hoses;
  (b) diesel power pack with an external output of NOT greater  
      than 12V;
  (c) suction hoses;
  (d) rubber tracks

GRINDING DRUM BALL SORTERS, including ALL of the following: 
  (a) 8 outlet chutes; 
  (b) ball hopper;
  (c) vibrating feeder;
  (d) sorting drums; 
  (e) dischargers

PALLET RING CLEANING MACHINE, CONCRETE PIPES, with OR without 
steel frame, including BOTH of the following:
  (a) cleaning robot;
  (b) scraper system

ABSORPTION TOWERS, SULPHURIC ACID PLANT, with OR without 
pipework, including ALL of the following:
  (a) ceramic saddles;  
  (b) filters;
  (c) acid dilution unit

MAT FORMING LINES, PARTICLE BOARD, including ALL of the 
following:
  (a) distribution flaps; 
  (b) continuous pre-press with hydraulic unit;
  (c) magnet AND metal detector;
  (d) disc screen AND mat former feeder;  
  (e) mat former assembly;  
  (f) forming width adjusters;
  (g) pre-heater;
  (h) belt conveyors;
  (i) belt scales;
  (j) infrared moisture analyser;
  (k) sprayers;
  (l) steel belt cleaner;
  (m) safety unit with fire extinguisher;
  (n) traversing unit weight gauge;
  (o) peak detector;
  (p) smoothing roller

HEAT EXCHANGE SYSTEM, AQUACULTURE, programmable logic 
controlled, with OR without tank, including ALL of the following:
  (a) self-cleaning backflush unit;
  (b) pumps;
  (c) variable speed drive;
  (d) valves;
  (e) pipes

TROLLEY WASHERS, including ALL of the following:
  (a) wash module;
  (b) rinse module;
  (c) internal conveyors;
  (d) control unit
with OR without EITHER of the following:
          (i) vapour extraction;
         (ii) water blow off

FISHWAYS, hydraulically operated, programmable logic controlled, 
including ALL of the following:
  (a) pontoons;
  (b) pumps;
  (c) valves;
  (d) cameras;
  (e) wireless network; 
  (f) electrical switchboard;
  (g) electrical cables;
  (h) air cooling booth;
  (i) access ramp;
  (j) underwater guiding system; 
  (k) nets

DEWATERING SCREW PRESS, including ALL of the following:
  (a) inlet hopper;
  (b) drip pan;
  (c) splash shield;
  (d) bar spacers

TURBINE MODULES, GAS TURBINE SYSTEM, with OR without ANY of the 
following:
  (a) turbine enclosure assembly, including fire protection
      aerosol canisters;
  (b) turbine auxiliary skid, including ALL of the 
      following:       
          (i) control system;
         (ii) hydraulic start system;
        (iii) lubrication oil system,
  (c) air filter assembly AND silencer enclosure;
  (d) gas only fuel system

HEAT ABSORBERS, VAPORISED GAS CONVERSION

VACUUM PRESSURE IMPREGNATION PLANT, including ALL of the 
following:
  (a) impregnation tank;
  (b) storage tank;
  (c) control panel;
  (d) electrical panel;
  (e) flanges, valves AND piping;
  (f) capacimeter unit;, 
  (g) resin trap; 
  (h) gear motor;
  (i) vacuum pump; 
  (j) hydraulic system;
  (k) chiller

LUBRICATION SYSTEMS, GENERATOR, with OR without ANY of the 
following;
  (a) oil pump;
  (b) oil reservoir;
  (c) rotor shaft;
  (d) electric heater;
  (e) heat exchanger;
  (f) oil filter

HYDRAULIC TRAILER STEERING SYSTEM, electronic sensor controlled, 
having ALL of the following:
  (a) turntable plates AND wheel assembly;
  (b) fifth wheel section;
  (c) hydraulic steering cylinders;
  (d) steering cylinder attachment plates; 
  (e) hydraulic control banks;
  (f) hydraulic hose with connections;
  (g) control modules, 
with OR without ANY of the following:
  (i)  remote control; 
 (ii)  sensors; 
(iii)  accumulators; 
 (iv)  hydraulic hose AND electrical cable

INSECT HOUSING AND/OR INCUBATION GROW UNITS, including ANY of 
the following:
  (a) breeding trays;
  (b) air conditioners; 
  (c) extraction fans;
  (d) climate sensors;
  (e) control panels;
  (f) ventilation systems

VIBRATION CONTROLLERS, WIND TURBINE, including ANY of the 
following: 
  (a) control cabinet;
  (b) accelerometers AND cables;
  (c) damping actuators;
  (d) router;
  (e) cooling device;
  (f) power amplifier

WASHING SYSTEM, PRINTING PLATES, vertical, including ALL of the 
following;
  (a) servomotors;
  (b) height NOT greater than 2 400 mm;
  (c) width NOT greater than 3 850 mm;
  (d) output voltage NOT less than 200 VAC and NOT greater   
      than 240 VAC;
  (e) 10 inch touch screen display

MOBILE TRAIN WASH SYSTEM, bi-directional, programmable logic 
controlled, including ALL of the following:
  (a) pre-wet AND detergent spray arches;
  (b) spray AND rinse arches; 
  (c) side AND eaves AND front wash stations;
  (d) light barriers;
  (e) control cabinet;
  (f) water AND dosing pumps;
  (g) tanks;
  (h) water pipes;
  (i) cables;
  (j) compressor

REPAIRED, OVERRIDE TOOL, MULTI-QUICK CONNECTION SYSTEM
For the purposes of this Order, these goods had been sent out of 
Australia for repair prior to importation

KICKER FORMWORK GANTRIES, TUNNEL INVERT LINING, self-propelled, 
including ALL the following:
  (a) curved panels; 
  (b) electric hydraulic power pack;
  (c) wheel drive system;
  (d) concrete lining tunnel capacity NOT greater than 15 metres;
  (e) access platforms AND stairs;
  (f) vibrators

BULK VOLUME FERMENTER REACTOR SYSTEM, anaerobic, having ALL the 
following: 
  (a) floating geomembrane cover system;
  (b) recycling pumps AND piping;
  (c) sludge waste piping AND/OR valve with loadout connection;
  (d) biogas collection system AND emergency vent

MACHINES, TUNNEL ARCH FORMWORK, self-propelled, including ALL of 
the following:
  (a) steel modular arch profiles AND bracing;
  (b) electric hydraulic power pack;
  (c) rail mounted wheel drive system;
  (d) concrete lining support of NOT less than   
      15 metres of tunnel per repair;
  (e) access platforms AND stairs

ORE SAMPLE PREPARATION SYSTEM, programmable logic controlled, 
including ALL the following:
  (a) sample stacker AND tray magazine;
  (b) dosing module;
  (c) tamping module;
  (d) linear transporter;
  (e) scara robot;
  (f) cleaning module;
  (g) electrical cabinets;
with OR without conveyor

CORONA TREATMENT LINE, having BOTH of the following:
  (a) coating substrate unit;
  (b) infeed unwinding unit

RINSING BATH MEMBRANES, programmable logic controlled, having 
ANY of the following: 
  (a) rinsing tanks;
  (b) pumps;
  (c) cylinders;
  (d) axial winders;
  (e) tension controllers;
  (f) coverings; 
  (g) control units AND/OR control panels

TEXTILE FABRIC AND/OR CLOTHING SORTING LINE, including ALL of 
the following:
  (a) picking robot;
  (b) scanners AND/OR cameras;
  (c) conveyors, whether OR not evacuating, with OR without
      receiving bins;
  (d) processing AND/OR control units
with OR without sorting tables

CLAY OR MUD GUNS, BLAST FURNACE TAPHOLE, whether OR not 
assembled, including ALL of the following:
  (a) barrels;
  (b) hoods AND/OR shields, with OR without refractory lining;
  (c) collars;
  (d) piping;
  (e) nozzles; 
  (f) cones,
   with OR without ANY of the following:
    (i) temperature control AND/OR valve cabinets;
   (ii) ramming piston

DOWNHOLE TOOL GUIDE, OIL AND/OR GAS WELL, adjustable OR fixed 
nose angle

AUGER CLEANERS, DRILLING RIGS, hydraulic

COATING MACHINES, PLASTER

VIBRATION DAMPERS, PIPING, tuned, including installation clamp

BELT WASHERS, clean in place, with OR without pipework, 
including BOTH of the following:
a) belt washer cabinet having ALL of the following: 
          (i) pump;
         (ii) valve station;
        (iii) chemical injectors;
b) spray bars with OR without nozzles

CARBON DIOXIDE RECOVERY PLANT, including ALL of the following:
  (a) low pressure AND ammonia system;
  (b) skid valves hydrogen sulphide assembly;
  (c) high pressure carbon bed;
  (d) catox reactor;
  (e) skid dryer assembly;
  (f) carbon dioxide liquefaction skid assembly;
  (g) condenser;
  (h) nitrogen oxides cold trap assembly;
  (i) liquid pump skid assembly;
  (j) catalytic purifier
  (k) economiser;
  (l) preheater;
  (m) oxygen injector;
  (n) control panels;
  (o) filters;
  (p) valves;
  (q) temperature controls

ICE RESURFACING MACHINES, electric, including BOTH of the 
following: 
  (a) tanks;
  (b) spraying unit

ACCUMULATORS, HYDRAULIC SYSTEM, WALKING BEAM FURNACE

VIBRATION DAMPERS, BYPASS STACK ASSEMBLY, tuned

SORTING AND DISTRIBUTING MACHINES, TEXTILE CLIPPINGS, having ALL 
of the following:
  (a) transport conveyor;
  (b) metal detector;
  (c) optical camera AND sensor system;
  (d) compressed air valves;
  (e) electrical control cabinet
with OR without software

CLEANING MACHINES, BAKING PAN, programmable logic controlled, 
including EITHER of the following:
  (a) horizontal brush unit;
  (b) disc brush unit

LUBRICATION SYSTEMS, GENERATOR, including ALL of the following:
  (a) oil reservoir; 
  (b) demister AND/OR separator;
  (c) motors;
  (d) oil pumps;
  (e) valves; 
  (f) oil filter
with OR without ANY of the following:
          (i) pressure transmitters;
         (ii) temperature sensor;
        (iii) jacking oil pump;
         (iv) accumulators
          (v) heat exchanger

UNWRAPPING MACHINES, PALLET STRETCH FILM, programmable logic 
controlled, including BOTH of the following:
  (a) cutting system;
  (b) film gripping AND extraction system
   with OR without ANY of the following:
         (i) film removal system;
        (ii) conveyors;
       (iii) safety fencing

SCREW PRESSES, COFFEE GROUND, having motor voltage NOT less than 
390 volts, with OR without hoppers

OUTBOARD CONNECTORS, SUBSEA

TUBE CLEANERS, WATER COOLED CONDENSER, including ALL of 
the following:
  (a) skids, having ALL of the following:
          (i) recirculating pumps; 
         (ii) collectors; 
        (iii) actuators; 
         (iv) valves; 
          (v) nozzles;
  (b) strainers;
  (c) cleaning balls

DOSING SYSTEMS, UREA PLANT, skid mounted, having ALL of the 
following:
  (a) steel frame;
  (b) pumps;
  (c) valves;
  (d) pressure AND/OR flow AND/OR analyser instruments,
      with OR without ANY of the following: 
         (i) tanks;
        (ii) platform;
       (iii) ladder;
        (iv) handrails

WASHING AND DRYING MACHINES, BATTERY, programmable logic 
controlled, including ALL of the following:
  (a) frame; 
  (b) safety panels AND doors;
  (c) conveyor with guides AND stoppers;
  (d) pre-washing AND rinsing units;
  (e) water tanks;
  (f) brushing unit with motors AND cleaning brushes;
  (g) drying unit with bellows

FACADES, motorised, with OR without EITHER of the 
following:
  (a) infill frames;
  (b) LED lighting

POWER STAND MACHINES, COILED TUBING, including ALL of 
the following:
  (a) hydraulic jacks;
  (b) motors;
  (c) swivel

COILED TUBING SUPPORT UNITS, skid-mounted OR containerised, 
assembled OR unassembled, including ALL of the following:
  (a) control cabin;
  (b) hose reel skid;
  (c) hydraulic power pack;
  (d) reel power stand

SPIDER WRENCH, hydraulic, with OR without control panel, 
including ALL of the following:
  (a) split body;
  (b) rotary table rig adapter plate;
  (c) lift AND/OR spin AND/OR dog mechanisms

INSULATING GLASS PRODUCTION LINES, programmable logic 
controlled, including ALL of the following:
  (a) applicators for pads AND/OR spacers;
  (b) conveyors;
  (c) measurement station;
  (d) inspection station; 
  (e) dosing AND/OR metering stations; 
  (f) frame mounting stations;
  (g) heating pump;
  (h) press with gas filling;
  (i) mixing AND sealing machines;
  (j) transport AND/OR storage stations;
  (k) washing AND drying stations with OR without inlet AND/OR 
outlet stations

METAL RECYCLING AND COPPER RECOVERY PLANT, programmable logic 
controlled, including ALL of the following:
  (a) vertical mill processing capacity NOT greater than 8 
      tonnes per hour;
  (b) horizontal mill processing capacity NOT greater than 4 
tonnes per hour;
  (c) hoppers;
  (d) separators;
  (e) conveyors;
  (f) bucket elevator
      with OR without ANY of the following:
          (i) refiner having static AND flying blades;
         (ii) soundproof cabin;
        (iii) density separator;
         (iv) screeners

NET CLEANER RIGS, AQUACULTURE, with OR without ANY of the 
following:
  (a) pump;
  (b) winch;
  (c) control system;
  (d) fibre optic cabling NOT greater than 160 m