Tariff Concession Orders

PARTS, COAL GRINDING AND/OR COAL MILLING MACHINE, being upper 
rings AND/OR lower rings, with OR without ONE or BOTH of the 
following:
      (i) guides;
     (ii) plates

PARTS, VERTICAL ROLLER MILL, being ANY of the following:
  (a) sockets;
  (b) retainer rings;
  (c) drive side sealing plate units;
  (d) tension rods;
  (e) articulated heads;
  (f) butt strip pins; 
  (g) grinding plate rings; 
  (h) torque support bolts;  
  (i) bushes;
  (j) grinding roller stops;
  (k) torque support scrapers;
  (l) torque support sliding bearings;
  (m) torque support buffer heads;
  (n) clevis;
  (o) piston rod yokes

PARTS, PROCESSING PLANT MIXER, being rotors having adjustable 
AND/OR configurable AND/OR retractable pinned beaters OR blades

PARTS, ROD MILL, being of ANY of the following:  
  (a) rod mill bodies;
  (b) bearings;
  (c) lubricators;
  (d) wear plates, being shell liners AND/OR end liners

PARTS, CONCRETE PIPE MOULDING PRESS, being ANY of the following:
  (a) cage centring modules;
  (b) outer support rings;
  (c) profile rings;
  (d) insert rings;
  (e) press pistons AND distributors;
  (f) moulding press support frames

PARTS, ORE GRINDING MACHINE ROLLER, being EITHER of the 
following:
  (a) tungsten carbide studs;
  (b) tungsten carbide edge blocks

PARTS, EXTRUDER, being ANY of the following:
  (a) augers;
  (b) compactors, including ALL of the following:
          (i) hammer plate;
         (ii) trowelling plate; 
        (iii) compactor bar,
  (c) extruder vibrators, with OR without housing, eccentric
      plates, clamp plate OR adaptor plate;
  (d) abrasive concrete funnels

PARTS, CEMENT CLINKER GRINDING MILL, being ANY of the 
following:
  (a) roller assemblies, having ALL of the following:
          (i) rollers;
         (ii) swing levers;
        (iii) hydraulic cylinders;
         (iv) accumulators;
          (v) lubricators AND/OR greasers;
         (vi) automated controllers,
  (b) sintered roller tyres AND/OR sintered grinding table 
      liners;
  (c) lower and upper housings, having ALL of the following:
          (i) casings;
         (ii) cones;
        (iii) mill stands, 
  (d) grinding table assemblies, being EITHER of the following:
          (i) grinding table with water sprayers AND/OR pumps
              AND/OR chutes;
         (ii) table return recirculators (struts) with rings
              AND/OR scrapers AND/OR chutes,
  (e) separators, with OR without gear reducers, having
      ALL of the following:
          (i) casings;
         (ii) rotors;
        (iii) vanes;
         (iv) chutes

PARTS, FLOATATION CELL, MINERAL SEPARATION, being ANY of the 
following:
  (a) rotors;
  (b) stators;
  (c) stator stands

PARTS, CONE AND/OR GYRATORY AND/OR JAW CRUSHER, being ANY of the 
following:
  (a) wear segments AND/OR plates;
  (b) shields;
  (c) ring dust seals;
  (d) shells;
  (e) hydraulic crusher axles;
  (f) cylinders;
  (g) frames;
  (h) wedges;
  (i) bowls;
  (j) crusher heads;
  (k) pitman assemblies, consisting of ALL of the following:
          (i) shell;
         (ii) wear plates;
        (iii) shields;
         (iv) shaft;
          (v) ring dust seals

PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of 
the following:
  (a) chassis axles and undercarriages;
  (b) chassis;
  (c) conveyor covers;
  (d) conveyor head and tail drums;
  (e) conveyor skirts;
  (f) conveyor take ups;
  (g) cover plates;
  (h) discharge chutes;
  (i) door locking brackets;
  (j) drive couplings;
  (k) drive coupling covers;
  (l) drive guards;
  (m) engine covers;
  (n) engine sub-frames;
  (o) feed trays;
  (p) feeder outlets;
  (q) feeder spring mounts;
  (r) grizzly cartridges;
  (s) head scrapers;
  (t) hopper wing supports;
  (u) idler frames; 
  (v) idlers;
  (w) impact bars;
  (x) inspection doors;
  (y) jaw feed chutes;
  (z) jaw positioning blocks;
 (aa) main conveyor heads;
 (ab) main conveyor tails;
 (ac) plain carry rolls;
 (ad) rear wing cylinders;
 (ae) removable sub-chassis;
 (af) return to rolls;
 (ag) return roller guards;
 (ah) roll guards and brackets;
 (ai) side conveyor trusses;
 (aj) side rails and plates;
 (ak) tail bearings;
 (al) tail drums;
 (am) tail scrapers;
 (an) take up and motor mounts;
 (ao) tanks;
 (ap) track chassis axles;
 (aq) track extension plates;
 (ar) trainers;
 (as) truss hinges;
 (at) walkways;
 (au) weight scale idlers

PARTS, ANODE PASTE KNEADING MACHINE, being ANY of the following:
  (a) paddles AND/OR element screws;
  (b) wear plates;
  (c) rings;
  (d) sleeves

PARTS, TAILINGS THICKENER, being ANY of the following:
  (a) beams;
  (b) braces;
  (c) bridge supports;
  (d) cleats;
  (e) columns;
  (f) compression rings;
  (g) discharge cones;
  (h) floor segments;
  (i) plates;
  (j) wall sections;
  (k) weldments

PARTS, FEED AND/OR DISCHARGE ARRANGEMENT, GRINDING MILL, being 
ANY of the following:
  (a) feed endplates;
  (b) feed spouts and/or feed shafts;
  (c) discharge endplates;
  (d) discharge cylinders;
  (e) hoppers

PARTS, GYRATORY CRUSHER OR JAW GYRATORY CRUSHER, being ANY of 
the following:
  (a) spiders and/or spider helms;
  (b) wear segments and/or plates;
  (c) shields and/or guards;
  (d) shafts;
  (e) mantles;
  (f) ring dust seals;
  (g) shells;
  (h) crusher axle hydraulics;
  (i) cylinders;
  (j) lubricators

PARTS, HORIZONTAL STIRRED GRINDING MILL, being ANY of the 
following:
   (a) drive end flanges;
   (b) drive end flange liner outers;
   (c) drive end flange wear sleeves;
   (d) drive end flange liner inners;
   (e) displacement bodies;
   (f) discharge ring wear sleeves;
   (g) discharge rings;
   (h) displacement body end plates;
   (i) discharge body end plate liners;
   (j) rotors;
   (k) rotor bushes;
   (l) shaft spacers;   
   (m) shaft end caps;
   (n) shaft end cap face plates;
   (o) rotor rings;
   (p) rotor fingers;
   (q) non-drive end flanges;
   (r) non-drive end flange liners;
   (s) non-drive end flange liner wear sleeves;
   (t) scuttle sleeves;
   (u) non-abrasive grinding discs;
   (v) hubs;
   (w) gland inner sleeves;
   (x) gland wear sleeves;
   (y) gland housing wear caps;
   (z) gland housing extensions;
  (aa) gland housings;
  (ab) gland cushions;
  (ac) gland neck rings;
  (ad) gland lantern rings;
  (ae) gland followers;
  (af) gland cushion protection ring retainers;
  (ag) shell liners

FOAMED BITUMEN MODULE, ASPHALT PLANT

PARTS, IMPACT HAMMER MILL, being rotors, comprising ALL of the 
following:
  (a) rotor shaft;
  (b) rotor discs;
  (c) hammer shafts

PARTS, VERTICAL SPINDLE ROLLER MILL, being ANY of the following:
  (a) grinding bowls;
  (b) grinding plates;
  (c) cover hoods;
  (d) cover plates

PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of 
the following:
  (a) crawler track units;
  (b) track plates;
  (c) wheels;
  (d) rollers

PARTS, ROLLER MILL, being roller shells

LUBRICATORS, BALL MILL

PARTS, ROLLER CRUSHER, being roller cores comprising bearings 
and bearing housings

ROLLERS, PRESS, FORGED, comprising ALL of the 
following:            
  (a) roll diameter NOT less than 1.35 metres and NOT greater 
      than 2.1 metres;                                 
  (b) roll width NOT less than 1.05 metres and NOT greater than  
      1.8 metres;                                               
  (c) rough roll and/or tyre surface

PARTS, ROD MILL, being EITHER one or BOTH of the following:
  (a) discharge covers;
  (b) gear covers

PARTS, CEMENT RAW MATERIAL GRINDING MILL, being crushing 
roller securing pressure AND tension steel frames

PARTS, ROLLING AND MIXING DRUM, being forged steel running 
rollers

PARTS, SEMI-AUTOGENOUS MILL, being cast iron sealing heads, 
whether OR not assembled, having BOTH of the following:
  (a) mill head diameter NOT less than than 11.5 m;
  (b) mill head centre aperture NOT less than 3.5 m

BALL MILL HEAD, single cast, having ALL of the following:
  (a) integral trunnion;
  (b) outside diameter NOT less than 4 300 mm;
  (c) height NOT less than 1 450 mm

PARTS, VERTICAL ROLLER MILL, being ANY of the following:
  (a) shrinkage disc;
  (b) separating cage;
  (c) water cooling jacket;
  (d) liner;
  (e) rollers;
  (f) dam ring segments;
  (g) cover central column;
  (h) retainer bow;
  (i) liner plates;
  (j) inner roller stop unit

PARTS, HOLLOW-CORE CONCRETE SLAB PRODUCTION PLANT, being ANY of 
the following:
  (a) nozzle module;
  (b) nozzle module plates;
  (c) nozzle module levelling beams;
  (d) lifting beam clamps;
  (e) extruder flexible cable;
  (f) extruder unit feed screws;
  (g) extruder bushings;
  (h) extruder form dies;
  (i) extruder plates;
  (j) feed screw shafts;
  (k) extruder power unit

PARTS, BALL MILL, being grate plates

PARTS, CEMENT MIXER, being ANY of the following:
  (a) mixing arm;
  (b) mixing blade

PARTS, VERTICAL STIRRED MEDIA GRINDING MILL, being ANY of the 
following:
  (a) shell liners;
  (b) mill shells;
  (c) grinding rotors;
  (d) grinding shafts with OR without rotors;
  (e) impellers

PARTS, HIGH INTENSITY GRINDING MILL, being ANY one OR more of 
the following:
  (a) castellated rotors;
  (b) non-castellated rotors;
  (c) stators rings

PARTS, CEMENT GRINDING MILL, being diaphragms

BALL MILL HEADS, with OR without rubber liner, having ALL of the 
following:
  (a) integrated trunnion;
  (b) outside diameter NOT less than 3 500 mm;
  (c) height NOT less than 1 000 mm

PARTS, JAW CRUSHER, being swinging jaw unit

PARTS, JAW CRUSHER, being jaw holders

PARTS, ORE CRUSHER AND/OR MILLING PLANT, being ANY of the 
following: 
  (a) shells;
  (b) trommels;
  (c) heads; 
  (d) chutes;
  (e) guards;
  (f) couplings;
  (g) feed assembly;
  (h) feed inserts; 
  (i) discharge insert;
  (j) base plates;
  (k) pinion assembly;
  (l) brakes; 
  (m) liners; 
  (n) trunnions

PARTS, VERTICAL MILL, being ANY of the following: 
  (a) tyres; 
  (b) rollers; 
  (c) sleeves; 
  (d) liners; 
  (e) plates; 
  (f) rings; 
  (g) seals; 
  (h) sheet packings; 
  (i) casings; 
  (j) covers; 
  (k) stoppers; 
  (l) segments; 
  (m) accumulators; 
  (n) arms

PARTS, CONCRETE PIPE MOULDING PRESS, being EITHER of the 
following:
  (a) piston rings;
  (b) wear rings

PARTS, HIGH PRESSURE GRINDING ROLL, being ANY of the following:
  (a) lateral wall units with OR without digital sensor;
  (b) lateral wall tips;
  (c) lateral wall tungsten carbide wear plates;
  (d) lateral wall frames;
  (e) lateral wall backing plates

PARTS, GRINDING ROLL MACHINE, HARD ROCK AND MINERALS, being ANY
of the following:
  (a) grinding rolls AND/OR tyres;
  (b) press frame AND roller exchange table, whether OR not
      assembled

PARTS, AIR CLASSIFIER, being ANY of the following:
  (a) outlet head;
  (b) riser duct;
  (c) outlet channel;
  (d) channel supports;
  (e) inlet channel;
  (f) wear plate;
  (g) inlet hood;
  (h) air guide plate;
  (i) classifier housing;
  (j) flap;
  (k) guide element;
  (l) connecting pipe;
  (m) cage wheel

WEDGE WIRE CYLINDERS, seamless, outer diameter NOT less than 550 
mm and NOT greater than 1 750 mm

PARTS, OIL BATH VIBRATORS, concrete block, being ALL of the 
following:
  (a) shafts;
  (b) housing;
  (c) seals;
  (d) gears

PARTS, ORE CRUSHER, being rotors