Tariff Concession Orders

PARTS, REFRIGERATOR, DOMESTIC, being ANY of the following and 
whether or not in assemblies:
   (a) refrigerator and/or freezer baskets;
   (b) handles;
   (c) fascia and/or cabinet panels;
   (d) inserts;
   (e) assemblies, comprising fan and shroud;
   (f) covers;
   (g) housings;
   (h) ice and/or cold water modules;
   (i) mullions;
   (j) plates;
   (k) troughs;
   (l) hinges;
   (m) assemblies, freezer light, comprising cage, lamp and lamp
       holder;
   (n) bins;
   (o) levelling legs;
   (p) handle pedestals;
   (q) heat shields;
   (r) vents;
   (s) water sumps;
   (t) door assists;
   (u) condensers;
   (v) control boards;
   (w) clips;
   (x) trays;
   (y) corner seals;
   (z) strainers;
  (aa) corner braces

PARTS, REFRIGERATION SYSTEM, being suction accumulators having 
BOTH of the following:
  (a) inlet AND outlet connectors;
  (b) safe working pressure NOT less than  2 500 kPa

ASSEMBLIES, REFRIGERATION CONDENSOR AND COMPRESSOR, including 
ALL of the following:
  (a) condenser;
  (b) compressor;
  (c) receiver tank;
  (d) metal base

ASSEMBLIES, REFRIGERATION CONDENSOR AND COMPRESSOR, including 
ALL of the following:
  (a) condensers;
  (b) compressors;
  (c) receiver tanks;
  (d) valves;
  (e) fan motor;
  (f) metal support base

PARTS, HEAT PUMP, being condensers

LIQUID RECEIVER TANKS, REFRIGERATION SYSTEM, having inlet and 
outlet connectors

PARTS, EVAPORATIVE AIR CONDITIONING SYSTEM, being copper refnet 
joints, complying with Australian and New Zealand Standard 
1677-2 (AS/NZ 1677-2), having ALL of the following:
  (a) inlet NOT less than 6 mm and NOT greater than 50 mm;
  (b) outlet NOT less than 6 mm and NOT greater than 50 mm;
  (c) length NOT less than 100 mm and NOT greater than 1 000 mm

PANELS, VACUUM INSULATION, DOMESTIC REFRIGERATOR

ASSEMBLIES, CONTROL HOUSING, REFRIGERATOR, DOMESTIC, comprising 
NOT less than ANY three of the following:
  (a) housings;
  (b) thermostats;
  (c) shafts;
  (d) baffles, whether or not motorised;
  (e) baffle casings;
  (f) insulation;
  (g) light and/or heat shields;
  (h) gaskets;
  (i) seals;
  (j) knobs;
  (k) labels and/or stickers;
  (l) lamp holders;
  (m) lamps;
  (n) clips;
  (o) printed circuit boards;
  (p) wiring harnesses;
  (q) terminals and/or connectors;
  (r) air curtains;
  (s) mounting bases;
  (t) timers;
  (u) logo displays

PARTS, ICE MAKER AND/OR COLD WATER DISPENSER, DOMESTIC 
REFRIGERATOR, being ANY of the following:
  (a)  motor rails;
  (b)  controls;
  (c)  dispensers;
  (d)  fascias;
  (e)  ice makers;
  (f)  ice chutes;
  (g)  paddles;
  (h)  ice buckets;
  (i)  clips;
  (j)  sumps;
  (k)  gates;
  (l)  knockout pins;
  (m)  inserts;
  (n)  housings;
  (o)  covers;
  (p)  snubbers;
  (q)  frames;
  (r)  sleeves;
  (s)  arms;
  (t)  shrouds;
  (u)  end caps;
  (v)  shields;
  (w)  casings;
  (x)  anchors;
  (y)  plates;
  (z)  retainers;
  (aa) rods;
  (ab) crusher screws;
  (ac) augers;
  (ad) auger motor assembly, comprising ALL of the following:
          (i) solenoid;
         (ii) wire harness;
        (iii) motor;
         (iv) shield;
          (v) lamp holder;
         (vi) mounting bracket

COOLING ASSEMBLIES, REFRIGERATOR, leak free when subjected to
 internal pressure of NOT less than 1.4 MPa, comprising ALL of the
 following:
   (a) evaporator;
   (b) thermostat;
   (c) thermal fuse;
   (d) defrost heater

PARTS, REFRIGERATOR, being ANY of the following:
   (a) shelves;
   (b) gaskets;
   (c) endcaps

PARTS, COOLING UNITS, CONTINUOUS CYCLE ABSORPTION, comprising ALL of
 the following:
   (a) condenser;
   (b) evaporator;
   (c) gas temperature exchanger;
   (d) liquid temperature exchanger;
   (e) absorber;
   (f) absorber vessel;
   (g) pump;
   (h) water separator;
   (i) boiler

CONDENSERS, REFRIGERATION, air cooled, having ALL of the 
following:
  (a) heat exchanger coils;
  (b) axial fans;
  (c) electronic fan speed controllers

EVAPORATORS, AIR COOLING, with OR without defrost heaters, 
having ALL of the following:
  (a) fans;
  (b) airflow NOT less than 450 m3/hr;
  (c) fan diameter NOT less than 195 mm and NOT greater than 630 
mm;
  (d) dry weight NOT less than 5 kg

PARTS, being condensers, having ALL of the following:
  (a) fan motor blade diameter 500 mm OR 630 mm OR 800 mm;
  (b) heat exchanger coils;
  (c) fin surface with spacing NOT greater than 3 mm in diameter;
  (d) maximum operating pressure NOT greater than 32 bar

PARTS, FREEZER, being evaporators having 800 mm fans

PARTS, FREEZER AND/OR COOL ROOMS, being ANY of the following: 
  (a) insulated wall AND/OR ceiling panels; 
  (b) insulated doors;
  (c) evaporators