Tariff Concession Orders

PENDANT CONTROL STATION ENCLOSURES, having ALL of the 
following:
  (a) internal mounting plate;
  (b) protective cable sleeve;
  (c) internal cable clamp;
  (d) suspension ring;
  (e) cable tie;
  (f) NOT greater than 12 switch apertures

TIPS, PIPETTE, polypropylene, disposable, including a tip holding
rack

SEALS, single use, having ALL of the following:
  (a) blank OR printed OR numbered AND/OR barcoded; 
  (b) width NOT greater than 32 mm;
  (c) height NOT greater than 29 mm;
  (d) thickness 2.7 mm

PLASTIC BAG SEAL COMPONENTS, being interlocking low density 
polyethylene (LDPE) profiles, seal height NOT exceeding 3 mm

PARTS, CABLE TRUNKING, plastic, being ANY of the following:
  (a) cable mounting covers;
  (b) wall AND/OR ceiling mounting frames;
  (c) cabling mounting enclosures;
  (d) joining covers;
  (e) end caps;
  (f) base cable holders;
  (g) internal shelving cable holders

PROTECTIVE CLOSURES, CABLE SPLICE, including ALL of the 
following:
  (a) plugs;
  (b) tape;
  (c) tubes;
  (d) caps

MOUNTS, PORTABLE CAMERA, including ANY of the following:
  (a) wrist mounts;
  (b) gun OR fishing rod OR bow mounts;
  (c) bicycle mounts; 
  (d) open frame mounts;
  (e) floatation mounts;
  (f) watercraft mounts; 
  (g) suction mounts;
  (h) bar mounts;
  (i) musical instrument mounts;
  (j) tripod mounts;
  (k) adhesive mounts;
  (l) poles AND/OR grip mounts;
  (m) head OR chest OR animal harness mounts;
  (n) mounting clamps

SHELTERS, PORTABLE, including ALL of the following:
  (a) plastic canopies;
  (b) metal pole frames;
  (c) metal pole joiners;
  (d) metal pegs;
  (e) ropes

CONVEYOR BELTING, having ALL of the following:
  (a) two ply polyester fabric tension layer;
  (b) polyvinyl chloride top surface;
  (c) belt weight NOT less than 2.3 kg/m2 and NOT greater than 
      5.5 kg/m2;
  (d) belt thickness NOT less than 2 mm and NOT greater than 
      4 mm;
  (e) belt width NOT greater than 3 000 mm

DOWELS AND/OR NUTS, glass reinforced plastic, being EITHER of 
the following:
  (a) dowels having ALL of the following:
          (i) solid OR hollow core;
         (ii) seamless;
        (iii) continuous thread;
         (iv) diameter NOT less than 21 mm, 
  (b) nuts having an internal thread diameter NOT less than 21 mm

HOUSINGS, ELECTRICAL CABLE IN GROUND OR UNDERGROUND PIT, 
polycarbonate AND/OR glass reinforced polymer (GRP), including 
EITHER of the following:
  (a) housing cover;
  (b) honeycomb construction modular cable holders,
with OR without a galvanised steel headframe OR polycarbonate 
baseplates

FLOOD MITIGATION KITS, including BOTH of the following:
  (a) needle punched polypropylene bags filled with absorbent  
      paper embedded with sodium polyacrylate granules;    
  (b) waterproof screens having a nonwoven polypropylene  
      front AND oriented polypropylene laminate backing

PLUGS OR NOZZLES, PLASTIC BOTTLE, incorporating a flow outlet

PROTECTORS, UMBILICAL, OIL AND/OR GAS WELL, moulded, buoyant, 
hinged

GUARDS, VALVE AND/OR REGULATOR, GAS CYLINDER

DUNNAGE BAGS, inflatable, woven polypropylene outer AND 
polyethylene inner

COUNTING PIECES, PRESCHOOL AND/OR SCHOOL TEACHING AID, plastic, 
with OR without plastic container

BUCKETS, incorporating a mop wringer mechanism

SHAPES, CRAFT, polystyrene

COMPOSTERS, ROTATING BARREL, unassembled

PILLOWS OR CUSHIONS, inflatable, whether OR not U-shaped

COUNTING PIECES, PRESCHOOL TEACHING AID, plastic, with OR 
without plastic container

CABLE AND/OR CORD HOLDERS, helical shaped

GRILLS, AIR CONDITIONER, plastic

GASKET SEALS, silicone with stainless steel insert

POWER LINE MARKERS, PEOPLE AND/OR WILDLIFE PROTECTION, plastic 
AND steel, removable

WASHERS, SPLIT, polyoxymethylene

CONES OR BOLLARDS, TRAFFIC, plastic, with OR without rubber bases

ELASTICS, HAIR

PARTS, SAFETY BARRIER, plastic, being ANY of the following:
  (a) clips;
  (b) rails;
  (c) panel joiners;
  (d) mounting blocks;
  (e) barrier capping;
  (f) mesh clip holders OR buttons;
  (g) joiner pins;
  (h) mesh panels

MANDRELS, RISER SEALING, OIL AND/OR GAS WELL TESTING

FEET, TEMPORARY FENCING, having a weight NOT less than 16 kg and 
NOT greater than 18 kg

STRUCTURAL DRAINAGE MESH, HDPE, bi-planar OR tri-planar

GEONET, high density polyethylene, having ALL of the 
following:
  (a) tensile strength NOT less than 7.0 kN/m and NOT 
      greater than 12.0 kN/m in machine direction (longitudinal)
      in accordance with International Standard 10319
      (ISO 10319);
  (b) tensile strength NOT less than 2.5 kN/m and NOT
      greater than 4.0 kN/m in cross machine direction    
      (transversal) in accordance with International Standard
      10319 (ISO 10319);
  (c) weight NOT less than 650 g/m2 and NOT greater than 
      1 300 g/m2 in accordance with International Standard 9864 
      (ISO 9864);
  (d) density NOT less than 0.94 g/cm3 in accordance with
      American Society for Testing and Materials Standard D1505 
      (ASTM D1505);
  (e) roll width NOT less than 350 cm and NOT greater than
      400 cm

ELECTRICAL AND/OR FIBRE OPTIC SPLICE CLOSURES, including ANY of 
the following:
  (a) strain relief clamps;
  (b) retaining clips;
  (c) blanking plugs;
  (d) tape gauges;
  (e) cable ties;
  (f) end plates;
  (g) cassette covers;
  (h) chassis plates;
  (i) splicing cassettes;
  (j) storage cradles;

MESH FABRIC, consisting of polyvinyl chloride coated fibreglass 
yarn

SUPPORT CUSHIONS, LIFTING OR LOWERING, inflatable, plastic, with 
OR without compressor

PLUGS, INTUMESCENT

DUNNAGE BAGS, inflatable, having a high wet strength paper outer 
AND polyethylene lining

ENCLOSURES, FIBRE OPTIC CABLE, plastic, incorporating a dome AND 
base, with ANY of the following:
  (a) groove plates;
  (b) fibre optic cable organising AND connecting trays;
  (c) fibre optic cable storage baskets;
  (d) plastic cable terminals;
  (e) fibre optic cable blocks;
  (f) fibre optic cable mounting accessories, including ALL of
      the following:
           (i) clamps;
          (ii) O-rings;
         (iii) hook and loop fasteners;
          (iv) hex key;
           (v) silica gel;
          (vi) mounting brackets;
         (vii) seals

TRAYS, FIBRE OPTIC CABLE ORGANISING AND CONNECTING, plastic, 
with OR without ANY of the following:
  (a) groove plates;
  (b) tray wedge;
  (c) tray lid AND fibre optic cable guiding pin

TUBING, polyolefin, heat shrink, UV stabilised

SECTION PANELS, ACCESS CHAMBER, stackable, talc filled 
polypropylene OR glass reinforced polyester, with OR without 
connectors

MIRRORS, BABY, having a fabric OR plastic frame, with OR without 
ANY of the following:
  (a) lever lock suction cups;
  (b) visor clips;
  (c) remote control;
  (d) light AND/OR sound emitting

SCREEN PROTECTORS, PHONE AND/OR TABLET AND/OR MOBILE MUSIC AND 
VIDEO PLAYER, thermoplastic polyurethane

SUPPORTS, PLANT CULTIVATION, being ANY of the following:
  (a) stem supports;
  (b) clips;
  (c) hooks

MASTS, ANTENNA, fibreglass, polyurethane lacquer coated, having 
ALL of the following:
  (a) NOT less than 23 mm diameter antenna spigot fitting;
  (b) pegs AND ropes;
  (c) carry bag;
  (d) aluminium base support plate

NOZZLES, SEALANT APPLICATOR

CHAIR MATS, HARD FLOOR, plastic, textured surface top

CHAIRMATS, non slip, polyvinyl chloride, having flat grippers 
one side

DISKS, SURFACE PROTECTOR, plastic, adhesive backed

PIPETTE TIPS, polypropylene

PLATES, MICRO TEST, POLYMERASE CHAIN REACTION, polypropylene

LINERS, LITTER TRAY, elasticised

PLATES, MOP, having a swivel joint

KITS, FALSE FINGERNAIL, consisting of BOTH of the following:
  (a) false fingernails;
  (b) nail glue

FRAMES, SIGN HOLDER, plastic

MOUNTING TOOLS, AND/OR MOUNTING TOOL HEADS, FLOOR HEATING TUBE 
CLIP

CLIPS, HEATING PIPE HOLDER, polyoxymethylene(POM)

SHEETS, CONCRETE LINER, polyethylene OR polypropylene, having 
anchor knobs on one side

DUCTING, AIR, phenolic resin composite, asembled OR unassembled

PLANT TIES, plastic

TRAYS, GREENHOUSE BENCH, polystyrene, incorporating moulded 
drainage channels

TUBING, extruded, cross-linked, foamed polyethylene

PIPETTES, polystyrene

BUTTONS, TOILET CISTERN, uncoated OR chrome coated, with OR 
without EITHER of the following:
  (a) plates;
  (b) bezels

PRODUCT DISPLAYS, FUEL PUMP HANDPIECE, plastic

PIPE DUCTING, polyvinylchloride, with OR without ANY of the 
following:
  (a) wall covers;
  (b) bends;
  (c) elbows;
  (d) duct ends;
  (e) duct caps;
  (f) connectors

PILL CRUSHERS, incorporating a storage compartment within the lid

SHEETS, COOLING TOWER, polyvinylchloride, corrugated

STEERING WHEELS, BOAT, having BOTH of the following:
  (a) thermoplastic wheel;
  (b) alloy hub

SCREENS, SAFETY BARRIER, consisting of high density polyethylene 
sheeting with holes

FABRIC, WOVEN, PVC coated, aluminium coated on one side, vacuum
 bonded

CLIPS, SEALING, BAG, plastic

HANGERS, PICTURE, plastic, having NOT less than two metal pins

POMPOMS, having plastic handles and clustered streamers

CASTOR CUPS, FURNITURE SUPPORT AND CARPET PROTECTION, plastic, 
with spiked base

STOPPERS, DOOR, wedge-shaped, high density polyethylene

PLUGS, SCREW FIXING, nylon

PROTECTORS, FLAT SCREEN TELEVISION OR FLAT SCREEN MONITOR,  
acrylic

APPLICATORS, MEDICAL, consisting of BOTH of the following:
(a) polystyrene stick;
(b) un-impregnated foam head

HOLDERS, GLOBAL POSITIONING SYSTEM(GPS), plastic

BUFFING PADS, POLISHING MACHINE, cellular plastic foam

SPOOLS OR BOBBINS, CORD OR WIRE STORAGE

TUBES OR FLOATS, plastic, inflatable, incorporating a towing 
attachment

CHAMOIS, polyvinyl alcohol

MATS, FLOOR, interlocking, polyethylene resin

FABRIC, PVC coated polyester, open weave, having a warp thread 
count per 10 cm of 60 OR greater and a weft thread count per 10 
cm of 40 OR greater

ROLLS, VACUUM STORAGE, FOOD, plastic, double sheeted, having 
BOTH of the following:
  (a) sealed on both edges;
  (b) width NOT greater than 28 cm

MESH, polyester, laminated OR coated on both sides with 
polyvinyl chloride, with OR without release liner AND with 
OR without acrylic finish both sides

CASINGS, JUNCTION BOX, glass-reinforced plastic

HANDRAIL FITTINGS, fibreglass reinforced isophthalic polyester 
resin AND/OR fibreglass reinforced vinyl ester resin, being ANY 
of the following:
  (a) elbows;
  (b) tees;
  (c) crosses;
  (d) mountings;
  (e) bends;
  (f) corners;
  (g) angles;
  (h) base plates;
  (i) kick plates

SEPARATORS, TOE, plastic

MESH, SCAFFOLDING, plastic, wire reinforced, incorporating shade 
cloth

TEETHING RINGS OR SOOTHING RINGS, BABIES'

DOG HOUSES, moulded polypropylene

ROCKS, resin

BALLS, APPLICATOR, PERSONAL CARE OR HOUSEHOLD PRODUCTS, plastic

NETTING, POLYPROPYLENE, extruded and then orientated, having a 
weight NOT greater than 45 grams per square metre

STEP LADDERS, plastic, two step

LOCKS AND/OR FITTINGS, CHILD SAFETY, being any of the following:
  (a) finger guards; 
  (b) door stops;
  (c) window locks or fittings;
  (d) door or drawer locks or fittings

PADS, HEAT, electronically controlled, incorporating a three 
step heat controller

GRATINGS, MOULDED, fibreglass reinforced vinyl ester resin AND/OR
fibreglass reinforced isophthalic polyester resin

SOCKETS AND/OR DOWELS, TUNNEL SEGMENT JOINING

SHIELDS, RIOT, HAND CARRIED

KITS, FALSE FINGERNAIL, consisting of false fingernails and ANY 
of the following:
   (a) nail tips;
   (b) glass nails;
   (c) pre glued nails;
   (d) adhesive tabs;
   (e) art sheets;
   (f) confetti art;
   (g) manicure sticks;
   (h) top coat nail polishes;
   (i) stones;
   (j) storage cases;
   (k) stickers;
   (l) brush-on gels;
   (m) brush-on activators;
   (n) spray activators;
   (o) brushes;
   (p) brush-on cleaners;
   (q) manicure files;
   (r) buff blocks;
   (s) push pins;
   (t) coloured nail polishes;
   (u) tip guides;
   (v) glue stands;
   (w) damage control nail shields;
   (x) artificial nail removers;
   (y) acrylic powders;
   (z) acrylic liquids;
  (aa) sculpting brushes;
  (ab) acrylic primers;
  (ac) dappen dishes;
  (ad) nail forms;
  (ae) silk wraps;
  (af) fibreglass wraps;
  (ag) nail paints;
  (ah) nail enamels

HOLDERS, MOBILE PHONE

CARRIERS, PET, plastic, ventilated, having a hinged door

FASTENERS, plastic, being ANY of the following:
  (a) cable ties;
  (b) marker ties;
  (c) security ties;
  (d) push mount ties;
  (e) mounting ties;
  (f) knot ties;
  (g) wire collect ties;
  (h) fixing ties;
  (i) chassis ties

CHAIR MATS, polycarbonate

DISCS, WINE BOTTLE CAP, plastic

DISCS, WINE BOTTLE CAP, comprising ALL of the following:
  (a) polyethylene layers;
  (b) paper layers;
  (c) tin layers;
  (d) saran layers

MATS, NON SLIP, polyvinyl chlorine (PVC), knitted mesh, having a 
length NOT greater than 210 cm

CENTRALISERS, DRILL HOLE CASING AND/OR TUBING, thermoplastic

ALBUMS, TRADING CARD

GEOGRIDS, high density polyethylene(HDPE)

CAPPING, FENCE, polypropylene or polyvinyl chloride

POLYETHYLENE DISKS, low density, having ALL of the following:
  (a) Polyvinylidene Chloride (PVDC) laminated;
  (b) diameter of 28.5 mm;
  (c) thickness NOT greater than 2 mm

PANELS, RAISED POULTRY FLOORING, plastic, having holes occupying 
NOT less than 30% of the panel surface area

DISPENSERS, MEDICATION, ORAL

EARPLUGS

FOAM, CELLULAR URETHANE

SCREWS, FOUNDATION, plastic

MATS, CUSHION, extruded polyvinylchloride (pvc) surface

BAGS, PIPING, disposable, in roll form, being BOTH of the 
following:
 (a) HACCP (Hazard Analysis Critical Control Points) Australia 
     Food Safety Accreditation Systems endorsement;
 (b) complying with Australian and New Zealand Food Authority
     Standard 3.2.2 Clause 20 (ANZFA Standard 3.2.2 Clause 20)

FACESHIELDS, WELDING

COVERS, GAS BOTTLE

FUNNELS, LIQUID, plastic

BLANKS, SEAL, plastic, being ANY of the following:
  (a) polyurethane;
  (b) polyacetal;
  (c) polyamide;
  (d) polytetrafluoroethylene (PTFE);
  (e) polyaryletherketone (PAEK)

GEOGRIDS, polyester, having a tensile strength of NOT less 
than 18 kN/m

GEOGRIDS, polypropylene, having a tensile strength of NOT 
less than 20 kN/m

FILM, PRINTING, TRANSPARENT, THERMAL, in rolls OR sheets

CASES, CAMERA, UNDERWATER, polycarbonate

PACKERS, GROUT HOLE, expandable pressurised injection

STORAGE RACKS, PLASTIC, comprising ALL of the following:
  (a) shelves;
  (b) H frames;
  (c) panels

EAR MUFFS, NOISE PROTECTION

THREAD PROTECTORS, casing, tubing or drill pipe, polyurethane,
 having metallic parts made of non-sparking and non-corrosive alloy

AQUARIUM TANKS, transparent

BUFF PADS, polishing or compounding, polyurethane foam of
 prepolymer-polyester having ALL of the following:
   (a) density NOT less than 45.0 kg/m3;
   (b) compressions force deflection NOT less than 15.0 kPa;
   (c) tensile strength at break NOT less than 450 kPa;
   (d) elongation at break NOT less than 380%;
   (e) compression set NOT less than 11%

SHEET FASTENERS, being ANY of the following:
   (a) ties;
   (b) toggles;
   (c) wedges;
   (d) anchors;
   (e) straps;
   (f) studs;
   (g) clamps

SLEEVES OR SLEEVE KITS, WRAP AROUND, CABLE CLOSURE, comprising ALL
 of the following when in kit form:
   (a) heat-shrinkable sleeve;
   (b) metal canister;
   (c) channels

POLYPROPYLENE BEADS, expanded, having a density NOT exceeding
 300 g/L

RETRACTABLE ID BADGE HOLDER, plastic reel, housing a precision
 spring mechanism and 24" nylon cord to which an ID badge can
 be connected, the ID badge wearer can extend the ID badge
 without detaching it

GOLF BAG COMPONENTS, being ANY of the following:
   (a) top band cuffs;
   (b) full length dividers being internal cavity fittings to
       accommodate golf clubs

STENCIL, MARKING, plastic

KNOBS, PLASTIC, fluted, knurled OR similarly shaped, capable of
 fitting a 6 mm OR 1/4 inch splined, fluted OR screw shaft having ANY
 of the following diameters (excluding skirts OR pointers);
   (a)  8 mm;
   (b) 10 mm;
   (c) 12 mm;
   (d) 13 mm;
   (e) 15 mm;
   (f) 16 mm;
   (g) 19 mm;
   (h) 20 mm;
   (i) 21 mm;
   (j) 21.9 mm;
   (k) 24 mm;
   (l) 28 mm;
   (m) 33 mm;
 and having a height of 12 mm OR greater but less than 22.5 mm

EMBROIDERY HOOP AND FRAME, two piece, with or without screw in
 hanger

DUMMY MOBILE PHONES

POUCHES, LAMINATING, comprising BOTH of the following:
   (a) biaxially orientated polyethylene terephthalate OR
       ethylene olefin copolymer;
   (b) thickness NOT less than 75 microns and NOT greater than
       250 microns

PARTS, MODULAR CONVEYOR BELT, positive sprocket driven, comprising
 individual moulded plastic components interlocked by using a plastic
 hinge rod which spans the full width of the belt, being ANY of the
 following:
   (a) belt modules;
   (b) hinge rods;
   (c) toothed sprocket wheels

CHAIN, conveyor, accumulating matt - top

REPLICA DISPLAY PRODUCTS, being non-working models of telephones

BELTING CONVEYOR, polyurethane, having BOTH of the following
 characteristics:
   (a) flexible steel wire cores, running parallel to the edge of the
       belt or belting;
   (b) moulded teeth or notches, running transversely across the
       inner surface,

CLAMPS, HYDRAULIC MOUNTING, single or twin, having a single bolt
 hole with an inside diameter (ID) of NOT less than 4.0 mm but NOT
 exceeding 25.4 mm and NOT being ANY of the following:
   (a) electrical cable or conduit clamps;
   (b) hose clamps of the worm drive type;
   (c) multi-purpose clamp type using a screw and nut as the
       tightening device

PLASTIC GLITTER

LABELS, IDENTIFICATION BAND, tamper-proof, two-layer mylar laminate,
 self adhesive

BOBBINS, FORMERS OR SPOOLS, ELECTRICAL COIL, thermo-plastic,
 complying with AS 3108-1994 and IEC 742, being ANY of the
 following:
   (a) having moulded-in pins or terminals; OR
   (b) NOT having moulded-in pins or terminals or provision for pins
       OR terminals to be fitted, in sizes exceeding the 2 in.
       imperial size (metric equivalent 50.8 mm = EI 152), but NOT
       including those having a height of 15 mm, a centre limb width
       of 14 mm and a centre limb length of either 27 mm, 50 mm OR
       90 mm; OR
   (c) having provision for pins OR terminals to be fitted, but
       excluding those as specified in THE TABLE
                                   THE TABLE
              Imperial Size                    Metric Equivalents
                  1/4 in.                           6.35 mm  = EI 19
                  3/8 in.                           9.525 mm = EI 30
                  1/2 in.                           12.7 mm  = EI 38
                  9/16 in.                          14.3 mm  = EI 42
                  1 in.                             25.4 mm  = EI 76

JIGSAW PUZZLE HOLDER, portable, consisting of a felt lined board
 with fold-over flaps securable at top and bottom by velcro
 *NOTE: Because of the Tariff change on 1 July 1993, the tariff
 classification applicable to the goods described is 3926.90.00
 from the operative date to 30 June 1993.

DETECTORS, SHOCK IMPACT OR LEVEL, having a liquid filled glass tube,
 with or without a self adhesive label or plastic clip

HOOK AND LOOP FASTENING SYSTEMS, comprising BOTH the following:
   (a) moulded plastic hook;
   (b) hook and loop fastening tape, whether or not adhesive backed

ROLL CHOCKS, STEEL COIL, being stops OR wedges OR blocks OR cradles

COVERS, press fit, electric terminal housing

MATRIX, CREASING, FOLDING CARTON

STENCILS, calligraphy or decorative
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
      classification applicable to the goods described is 3926.90.00
      from the Operative Date to 30 June 1993.

GRATING, floor panels and treads, fibreglass reinforced isophthalic
 polyester resin, having ALL of the following:
   (a) a tested flame spread rating of 30 or less;
   (b) glass content NOT less than 25% and NOT more than 35% by
       weight as determined by ASTM-D-2584 for sunlight and chemical
       resistance;
   (c) bi-directional bearing bar construction with a bar spacing of
       NOT less than 25 mm and NOT greater than 50 mm;
   (d) a nominal grating depth of (1-1/2") 40 mm;
   (e) nominal panel sizes of (3"x10"), (5"x10", (4"x12") or (4"x8")

BOXES, SEALED, polycarbonate, having ALL of the following:
   (a) maximum wall thickness 3 mm;
   (b) tongue and groove sealing with neoprene gasket;
   (c) maximum operating temperature 100 degrees C

CLIPS, fastening, babies" nappy
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
 classification applicable to the goods describedis 3926.90.00
 from the operative date to 30 June 1993.

CHAIN, key, plastic coil

DRAPES, SURGICAL EQUIPMENT, single use

CABLE TIES, plastic, having ALL of the following:
   (a) a stainless steel barb permanently embedded in the head;
   (b) smooth moulded body;
   (c) ribbed and stippled inner surface;
   (d) infinitely adjustable diameter range

ROADWAYS, PORTABLE, comprising ANY of the following:
   (a) high density polyethylene (HDPE) straight AND/OR curved
       sections;
   (b) ramps;
   (c) fixing plates

CARTRIDGES, two part viscous product dispensing, having ALL of the
 following:
   (a) cartridge body bottom cap and plunger;
   (b) mixing spout with mixing element

ELECTRICAL CONDUCTOR HOLDERS, fibreglass reinforced plastic,
 conforming to ASTM F-711, mounted on extension arms or conductor
 support arms

PANELS, honeycomb cell shaped

HOOK FASTENERS, moulded plastic compatible with fastening system
 loop material

STORAGE UNITS, COMPACT DISC OR COMPUTER DISC, being ANY of the
 following:
   (a) racks;
   (b) drawers;
   (c) files;
   (d) cabinets;
   (e) boxes;
   (f) cases;
   (g) towers

ENVIRONMENTAL CHAMBERS, plastic, to enable micro-organism (bacteria)
 to be isolated, cultivated and grown
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
      classification applicable to the goods described is 3926.90.00
      from the Operative Date to 30 June 1993.

CABLE TIES, being ANY of the following:
   (a) of a length greater than 370 mm;
   (b) in line fasteners;
   (c) releasable;
   (d) reuseable

PUMP, syphon

BRACKETS, CAR MOUNTING, CELLULAR MOBILE TELEPHONE

CABLE TIES, nylon, conforming to either mil-m-20693a or mil 23190
 DRG3367 and being ANY of the following:-
 (a) standard non release ties having ALL of the following:
   (i)    length exceeding 230mm;
   (ii)   width exceeding 7.5mm;
   (iii)  tensile strength exceeding 45kgs
 (b) mounting head ties;
 (c) outside serrated ties;
 (d) panel fixing ties;
 (e) releasable ties;
 (f) rivet fixing ties;
 (g) cable tray fixing ties;
 (h) identification ties;
 (i) double headed ties

PET ANIMAL KEEPERS, transparent, having a snap on plastic
 ventilated lid with clear viewer AND/OR feeder windows

VALVES, SILICON, outside diameter NOT exceeding 40 mm

TACKLE BOXES, fishing, imported with two or more sliding draws

PUMPS, BREAST

PARTS FOR INSULATED TOOLS, being extension sections for hot sticks,
 having BOTH of the following:
   (a) fibreglass reinforced plastic material according to
       ASTM F711-89;
   (b) push button locking device

WELDING MASKS, darkening electro-optic welding filter, battery OR
 solar powered, laminated glass

WALL PANELS, high density polyethylene, ventilated, having ALL of
 the following:
   (a) panel surface size having a width NOT less than 195 mm and
       a length NOT exceeding 1 100 mm;
   (b) open mesh;
   (c) wall thickness NOT greater than 20 mm

MEASURES, hand held, capacity 0.5 litres to 5.0 litres inclusive

CLIPS, DIELECTRIC, plastic, comprising two clips connected through a
 breakaway joiner

PROTECTIVE PLASTIC CLOSURES AND THREAD PROTECTORS

SEXUAL AIDS, being EITHER of the following:
   (a) artificial sexual organs OR representations thereof;
   (b) stimulators

MICROSPHERES, VINYLIDENE CHLORIDE AND ACRYLONITRILE COPOLYMER, being
 EITHER of the following forms:
   (a) unexpanded, containing liquid isobutane under pressure;
   (b) expanded

CABLE TIE ACCESSORIES, being ANY of the following:
   (a) mounting base;
   (b) clamp

SEALS, polypropylene, numerically and or colour coded, one use,
 maximum sizes 22 mm x 12 mm x 2 mm

TAGS, ANTI-SHOP THEFT, plastic, incorporating a dye

CUSHIONS, being inflatable plastic with textile flock coating

SLIDE MOUNTS, PHOTOGRAPHIC

CHILD SAFETY AND HYGIENE PRODUCT, being a graduated medicine dropper
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
      classification applicable to the described goods is 3926.90.00
      from the Operative Date to 30 June 1993.

ENCLOSURERS, electronic equipment, hot moulded glass fibre
 reinforced polyester with or without polycarbonate covers

TISSUE DISPENSERS, with attachments to enable dispenser to be placed
 in positions of convenience

CAT PANS, enclosed type, incorporating an air filter

IDENTITY CARD HOLDERS, plastic, having ALL the following:
   (a) adjustment slots in the back of the holder;
   (b) adjustable clip

FENDERS, inflatable, heavy duty, polyvinyl chloride, of the marine
 quality type

JOINT KITS, STUFFED TOY, containing ALL of the following:
   (a) male part;
   (b) female part;
   (c) retainer clip

PARTS, ANTI-THEFT DETECTION SYSTEM, being ANY of the following:
   (a) wraps;
   (b) keys, ratchet;
   (c) detachers

HOUSINGS, PET RODENT

STAPLES, polymer composite, in strip form

WELDING HELMET, with automatically darkening electro-optic welding
 filter consisting of a seven layer laminated glass unit including
 two liquid crystal cells, three polarizers, one i-f filter, one
 cover glass an electronic device and a plastic cassette

FALSE FINGERNAIL KITS, consisting of false plastic fingernails,
 nail glue and nail buffers

STAPLES, VINE TYING MACHINE, plastic

PARTS, CABLE TIE, being EITHER of the following:
   (a) strap on a reel;
   (b) locking heads

HOLDERS, key, magnetic

SEALS, numerically AND/OR colour coded, single use, maximum sizes
 30 mm x 25 mm (including legs) x 2.5 mm thickness

REACTION TUBES, polypropylene, autoclavable
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
      classification applicable to the goods described is 3926.90.00
      from the Operative Date to 30 June 1993.

WEATHER SHIELDS, BABY STROLLER

FILTERS, membrane, circular disc form, dia NOT exceeding 293 mm,
 having a pore size of 0.01 microns or greater but NOT exceeding 8
 microns

ALBUMS, clear plastic film pages, incorporating a picture frame
 NOTE: Because of the Tariff change on 1 July 1993, the tariff
      classification applicable to the goods described is 3926.90.00
      from the Operative Date to 30 June 1993.

BAIT STATIONS, rodent, with tamper resistant locking devices

CONFECTIONERY DISPENSERS, HAND HELD, with OR without confectionery,
 aggregate weight NOT exceeding 100 grams

TEETHERS, baby excluding ALL of the following which incorporate a
 shield, latex teat and ring handle:
  (a) dummies;
  (b) pacifiers;
  (c) soothers;
  (d) comforters

BELTING, transmission, flat, anti-static, having extruded and/or
 woven polamide reinforcement with one or more outer layers of
 acrylo-nitrile-butadiene rubber (NBR)

CONVEYOR BELT, MODULAR, positive sprocket driven, comprising
 individual moulded plastic components interlocked by using a plastic
 hinge rod which spans the full width of the belt, including parts
 as follows:
 (a) belt module;
 (b) hinge rod;
 (c) toothed sprocket wheel

TOYS, PET

DRAPES, DENTAL SURGERY BARRIER PROTECTION, single use, transparent

MECHANICAL TRANSFER SYSTEM, to facilitate patient movement between
 wheelchair/bed/vehicle/commode/shower/bath/chair

AQUARIUM TANK SETS, comprising a transparent plastic tank and ANY
 of the following:
   (a) aquarium filter;
   (b) decorative plants;
   (c) gravel;
   (d) refillable carbon cartridge

GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE FILM, having ALL the
 following:
   (a) thickness between 20-1050 microns;
   (b) thickness tolerance of +/- 5%;
   (c) less than 1% haze when tested to ASTM D1003

MOULDS, chocolate confectionery shape

CUTTING STICKS, plastic, guillotine

TOYS, DOG OR CAT

CONVEYOR BELTING, LUGGAGE OR PARCEL HANDLING, having ALL of the
 following:
   (a) two ply polyester carcase;
   (b) urethane impregnated under side;
   (c) polyvinyl chloride top surface;
   (d) belt thickness in the range from 2 mm to 9.5 mm;
   (e) belt weight in the range from 2.5 kg/m2 to 5.5 kg/m2

HOUSINGS, CLOSED CIRCUIT TELEVISION CAMERA

HOLDERS, CABLE, having EITHER of the following:
    (a) an adhesive backing; or
    (b) being sets comprising at least one of the following:
        (i)   plugs;
        (ii)  nails; or
        (iii) screws

TILE SPACERS, HAND TOOL

FURNITURE, CAT, being ANY of the following:
   (a) chair;
   (b) television-shaped sleeping box;
   (c) drawer;
   (d) tower;
   (e) bed

FLOORING, high density polyethylene, ventilated, having ALL of the
 following:
   (a) panel surface size having a width NOT less than 570 mm and a
       length NOT exceeding 1 400 mm;
   (b) ventilating slots of 3 mm x 25 mm;
   (c) fitted with locking lugs or clips

DOG KENNELS, nitrogen insulated plastic

ANIMAL OR BIRD ARTICLES, being ANY of the following:
   (a) dog chews, but NOT including flying discs;
   (b) beads;
   (c) bird houses

CASINGS, CONTROL AND SIGNALLING STATION, polycarbonate, 
incorporating BOTH of the following:
  (a) control AND signalling unit apertures;
  (b) cable entry apertures

FLAT TUBE, CO-EXTRUDED POLYETHYLENE, printed, gusseted, in roll 
form, having ALL of the following:
  (a) thickness of NOT less than 114 microns and NOT greater 
      265 microns;
  (b) embossed de-aeration channel with perforations OR slits;
  (c) separation strip

BEND RESTRICTORS, UMBILICAL, SUBSEA OIL AND GAS PRODUCTION

KITS, POWER CABLE JOINER NOT GREATER THAN 1 kV, WITH OR WITHOUT
RING CONNECTOR AND/OR STIRRER, consisting ALL of the 
following:
  (a) joint housing;
  (b) cable seals;
  (c) joining compound;
  (d) abrasive cloth tape;
  (e) gloves

BAGS, BIOREACTOR, having connection tubes

TEST TUBES, polystyrene, having BOTH of the following:
  (a) width NOT greater than 13 mm;
  (b) length NOT greater than 75 mm

PARTS, STEEL COIL STORAGE SYSTEMS, being ANY of the following:
  (a) roll stops OR roll wedges OR roll blocks OR roll cradles;
  (b) roll stop rails OR roll stop connectors OR roll stop 
      spacers;
  (c) coil pads OR coil saddles OR coil mats;
  (d) coil beams OR coil trays;
  (e) coil carriers AND coil carrier sections

HANDLE COVERS, OPERATING THEATRE SURGERY LIGHT, sterile, plastic

PEELBOARDS, having ALL of the following:
  (a) stainless steel frame;
  (b) polypropylene foam upper surface NOT less than 10.00 mm 
thick;
  (c) outside dimensions NOT less than 3 000 mm long and 1 300 
mm wide;
  (d) thickness NOT less than 60.00 mm

PIPETTE TIPS, LABORATORY, plastic, whether OR not carbon 
impregnated, with OR without ANY of the following: 
  (a) filter;
  (b) tip holder;
  (c) tip holding rack

FILTRATION MEDIA, being biocarriers, high density polyethylene, 
having ALL of the following:
  (a) cylindrical flat outer spiral;
  (b) crossed inner walls;
  (c) length NOT less than 11.5 mm and NOT greater than 14.5 mm; 
  (d) specific surface NOT less than 925 m2/m3 and NOT greater
        than 985 m2/m3

MOUNTING BRACKETS, adjustable, having BOTH of the following:
  (a) vertical range NOT less than 14 degrees;
  (b) horizontal range NOT less than 44 degrees

KEY SHELLS

BOLT CAPS, FIRE PROTECTION

COVERS, UNIVERSAL WALL SWITCH, having a warning label

CABLE GLANDS, screw connection, having BOTH of the following:
  (a) self-locking cap nut;
  (b) trapezoidal thread,
with OR without multi hole rubber insert

CLIPS, fibreglass reinforced nylon, having a load capacity NOT 
greater than 100 kg

AWNINGS, VINYL, CARAVAN AND/OR MOTORHOME, including BOTH of the 
following:
    (a) pegs;
    (b) support legs,
With OR without ANY of the following:
         (i) tension rafter;
        (ii) 12 V DC motor;
       (iii) remote control;
        (iv) awning switch;
         (v) hand crank;
        (vi) crank clips;
       (vii) bolts;
      (viii) pop rivets;
        (ix) leg engagements;
         (x) brackets AND/OR Bracket covers;
        (xi) nuts;
       (xii) washers

LASTS, FOOTWEAR, plastic, with OR without aluminium fittings

LASTS, FOOTWEAR, plastic, with OR without EITHER of the 
following:
  (a) metal plates;
  (b) hinges

MOULDED SHAPES, heat shrink, having ANY of the following:
  (a) flexible polyolefin;
  (b) semi-rigid flame retardant polyolefin;
  (c) modified fluoroelastomer;
  (d) modified elastomer;
  (e) flexible flame retardant polyolefin;
  (f) flexible flame retardant fluoroelastomer;
  (g) hot melt adhesive

SEAL RINGS, fluoroelastomer, having BOTH of the following:
  (a) diameter NOT greater than 250mm;
  (b) temperature resistance NOT greater than 250 degrees Celsius

JUNCTION BOXES, with OR without ANY of the following:
  (a) conical cable-glands;
  (b) knock-outs;
  (c) transparent covers

ACCESSORY KITS, PORTABLE ESPRESSO COFFEE MACHINE, consisting of 
ALL the following:
  (a) water tank;
  (b) cup;
  (c) filter baskets;
  (d) adapter ring;
  (e) tamper;
  (f) instruction book

KITS, FALSE FINGERNAIL, including ALL of the following:
  (a) false fingernails;
  (b) glue;
  (c) buffer;
  (d) adhesive tabs;
  (e) manicure AND/OR cuticle stick

FITTINGS AND/OR ACCESSORIES, SAFETY HELMET AND/OR GOGGLES, being 
ANY of the following:
  (a) visors with OR without magnetic side-arms;
  (b) visor magnetic side-arms;
  (c) visor lens with OR without safety markings;
  (d) goggle lower faceguard flip-ups

LOCK HASPS, nylon

PIPE AND/OR TUBE ACCESSORIES, being ANY of the following:
  (a) flow bend clip;
  (b) collet locking tool;
  (c) locking clip

SUPPORT FITTINGS, RAISED FLOORING, polypropylene AND/OR 
thermoplastic elastomer, being ANY of the following:
  (a) joining AND/OR levelling heads;
  (b) threaded outer tubes AND/OR housings;
  (c) bases;
  (d) extension elements;
  (e) fixing AND/OR converting rings

CONCRETE PROTECTIVE LINERS, thermoplastic, in sheet OR roll 
form, incorporating anchor studs, being ANY of the following:
  (a) ethylene-chlorotrifluoroethylene having a thickness NOT
      exceeding 2.5 mm;
  (b) polyvinylidene fluoride having a thickness NOT exceeding
      4.0 mm;
  (c) polyethylene having a thickness NOT exceeding 12.0 mm;
  (d) polypropylene having a thickness NOT exceeding 12.0 mm

WATER DRAINAGE CAVITY SHEETS, cuspated, high density 
polyethylene (HDPE), impermeable, having an overall thickness 
NOT less than 36 mm and NOT greater than 66 mm at a load of 
2 kPa, with or without either of the following;
  (a) selvage edges;
  (b) interlocking edges

PLUG SEEDLING TRAYS AND/OR ORCHID TRAYS, HORTICULTURAL, moulded 
plastic, multi-cell

VENTILATION BELTS, FIBRE BOARD CLEANING UNIT, having ALL of the 
following:
  (a) polyester AND bronze wire composition;
  (b) thickness NOT greater than 2.0 mm;
  (c) width NOT greater than 3 000 mm;
  (d) length NOT greater than 18.0 m

COVERS, GAS BOTTLE

CAPPING, FENCE, polypropylene or polyvinyl chloride

LINERS AND/OR THREADED INSERTS, BOTTLE CLOSER

SEALS, hydraulic AND/OR pneumatic, moulded plastic, with OR 
without rubber components

COLLARS AND/OR SPONSONS, RIGID HULLED AND/OR INFLATABLE BOAT, 
having one OR more of the following:
  (a) inflatable section;
  (b) inflatable bladder;
  (c) foam insert;
  (d) polyurethane sheath

TETHERS, HARD HAT, coil, having ALL of the following:
  (a) clamp OR clip;
  (b) loop;
  (c) maximum load capacity NOT greater than 1.0 kg;
  (d) length NOT less than 11 cm and NOT greater than 86 cm

SEALS, TRAILER AXLE HUB ASSEMBLIES, outside diameter NOT less 
than 93 mm and NOT greater than 161 mm

BIOPSY SPECIMEN CASSETTES, plastic, including lid

IRRIGATION DRIPPER UNIT, multi-outlet, internal labyrinth

TRIM REMOVER SETS, plastic, including ALL of the following:
  (a) NOT less than 27 different tools;
  (b) nylon storage roll

BEND RESTRICTORS, SUBSEA FLOWLINE, including BOTH of the 
following:
  (a) re-enforcement rings;
  (b) adaptor plates

BUCKET COVERS, SUBSEA VEHICLE, having plastic OR 
stainless steel handle

BIOPSY SPECIMEN CASSETTES, plastic, with OR without lids

TETHERS, COIL, polyurethane, having ALL of the following:
  (a) clamps AND/OR clips;
  (b) maximum load capacity NOT greater than 1.0 kg;
  (c) length NOT greater than 860 mm

IRRADIATED MIXING BAGS, having BOTH of the following:
  (a) impeller AND thermowell;
  (b) volume NOT less than 950 litres

DISKS, POLYMER COUPON, OIL AND/OR GAS

DISTRIBUTED BUOYANCY MODULES, SUBSEA UMBILICALS AND/OR RISERS, 
having BOTH of the following: 
  (a) internal syntactic foam; 
  (b) external plastic shell

TRIM TOOLS, being pry bars, plastic

PODS, PAINTBALL, plastic

INTUMESCENT EPOXY BOXES, with OR without EITHER of the following:
  (a) perforated stainless steel;
  (b) eccentric fasteners

MOUNTINGS AND/OR FITTINGS, POCKET DOOR SYSTEM, being ANY of the 
following, whether OR not in sets:
  (a) supports;
  (b) covers;
  (c) scuff guards;
  (d) height adapters

BUOYANCY UNITS, SUBSEA, including ALL of the following:
  (a) foam core;
  (b) polyethylene shell;
  (c) clamps;
  (d) fastening straps;
  (e) steel frame

EMISSION COVERS, BIOGAS SILO, double sided PVC-lined polyester, 
having ALL of the following: 
  (a) UV AND microbial resistance; 
  (b) abrasion resistance; 
  (c) tensile strength NOT less than 3 800 N/5 cm;
  (d) weight NOT less than 880 g/m2;
  (e) service opening;
  (f) mast system of galvanised steel coated with epoxy resin

SUBSEA STAB CONNECTOR, including BOTH of the following:
  (a) stainless steel weight; 
  (b) handle

FILTERS, COFFEE CAPSULE, polypropylene, having outside diameter 
NOT greater than 38 mm

TRAYS, FISH EGG HATCHERY, having ALL of the following:
  (a) moulded hatching tray;
  (b) dividing wall;
  (c) egg grid;
  (d) snap fit channel cover;
  (e) water tray

SPACERS, TUNNEL SEGMENT STACKING, plastic

LINKS AND CHAINS, CONVEYOR

NETTING AND/OR WEBBING, BALING, polyethylene, having ALL of the 
below:
  (a) directional tapes NOT less than 0.4 cm and NOT greater 
      than 1.5 cm;
  (b) cross directional tapes NOT less than 0.3cm and NOT 
      greater than 0.5 cm;
  (c) in rolls NOT less than 3 000 m in length and NOT
      greater than 1.75 m in width

STORAGE CASES, stackable, with OR without compartment inserts, 
having All of the following:
  (a) ABS material;
  (b) latches with winger recesses;
  (c) coupling elements

FLOATING STANCHIONS, moulded plastic, including BOTH of the 
following:
  (a) NOT less than 3 inner pipes; 
  (b) outer diameter NOT less than 450 mm and NOT greater than 
      560 mm

BUND LINERS, SPILLAGE CONTAINMENT, polyester reinforced PVC, 
having ALL of the following: 
  (a) support structure having ALL of the following:
          (i) PVC;
         (ii) aluminium;
        (iii) galvanised iron, 
  (b) 2 drains; 
  (c) earth rods AND clamps AND cables; 
with OR without the following:
          (i) support tube horizontal;
         (ii) support tube vertical; 
        (iii) support tube base;
         (iv) 3 axis fitting;
          (v) 90? fitting;
         (vi) t fitting;
        (vii) draining valve assembly; 
       (viii) carry bags; 
         (ix) installation & repair kit having ALL of the
              following;
              (a)abrasive paper sheet;
              (b) brush;
              (c) 2 A4 PVC material sheet;
              (d) 2 x 25 ml glue;
              (e) user manual,
          (x) ground rod;
         (xi) ground clamp;
        (xii) earth cable;
       (xiii) flexible hose;
        (xiv) fabric drum fuel;
         (xv) towbar kit for fabric drum

CABLE CHAINS, nylon

PALLET WRAP, linear low density polyethylene (LLDPE) AND high 
density polyethylene (HDPE), having BOTH of the following:
  (a) directional tapes;
  (b) cross directional tapes

GASKETS, STAVE AND/OR BLAST FURNACE, cellular silicone elastomers

MEMBRANES, cell mesh, having polyethylene AND polypropylene 
outer layer

BAGS, BLAST CONTAINMENT, self-inflating, including gas release 
system

MEMBRANES, on rolls, being polyethylene AND butyl rubber selvedge

NYLON CABLE CHAIN COMPONENTS, being ANY of the following:
  (a) sidebands;
  (b) covers;
  (c) rollers AND/OR wheels;
  (d) separators;
  (e) frames;
  (f) spacers;
  (g) pins;
  (h) brackets;
  (i) fixing combs;
  (j) stays; 
  (k) frame supports;
  (l) hooks;
  (m) slides;
  (n) sockets;
  (o) tie wrap clamps

MOULDED HOLDERS, POWER TOOL, being ANY of the following:
  (a) battery holders;
  (b) power tool holders;
  (c) charger mounts;
  (d) pack out attachments

PROTECTION STABS, SUBSEA CONNECTOR, having polyoxymethylene body

VANES, PERPENDICULAR INTERMITTENT WINDING, plastic

FLOATING STANCHIONS, moulded plastic, with OR without ANY of the 
following:
  (a) cleats AND pole sockets;
  (b) net connection tunnel;
  (c) knee plate tie through;
  (d) shackle cavity;
  (e) locking holes;
  (f) wear ridges;
  (g) net suspension funnel;
  (h) sinker tube suspensions funnel;
  (i) bracket spacing through holes;
  (j) walkway fastenings pipes through holes;
  (k) bracket spacing ropes lock pins; 
  (l) mooring bracket;
  (m) bird net pole sockets;
  (n) cross over brackets;
  (o) handrails

FUNNEL KITS, COOLANT, including ALL of the following:
  (a) funnel;
  (b) lid;
  (c) flow tubes;
  (d) extension tubes;
  (e) adaptors;
  (f) hose