Tariff Concession Orders

RODS, welding, aluminium

PROFILES, being solid sector-shaped conductors

CABLE CASINGS, aluminium, having ALL of the following:
  (a) pre-punched mounting holes;
  (b) length NOT greater than 2 500 mm;
  (c) height NOT greater than 185 mm;
  (d) width NOT greater than 55 mm;
  (e) one OR two compartments

EXTRUSIONS, ALUMINIUM, multi-hollow, in planar form, having ALL of
 the following:
   (a) width greater than 590 mm;
   (b) thickness 30 mm (+ or - 1%);
   (c) male and female assembly edges

TUBE, ALUMINIUM, DRAWN, seamless OR porthole extruded, aluminium
 alloy 3003

PROFILES, HEAT EXCHANGER, extruded, aluminium alloy 1100, 
multivoid, profile thickness NOT greater than 1.80 mm

TUBES, CONDENSER, multivoid, extruded, tube thickness NOT  
greater than 1.72 mm and void pitch NOT greater than 0.76 mm

RODS, aluminium master alloy, having a titanium content of 2.5%
 or greater but NOT exceeding 7.0% and whether or not containing
 boron to a maximum of 2.0%

BARS, aluminium, to ANY of the following AA Specifications:
   (a) Specification 6061-T651, thickness NOT less than 100 mm;
   (b) Specification 7075-T651;
   (c) Specification 2024-T351

RODS, welding, aluminium

PROFILES, extruded aluminium, to AA Specification 2024-T3511

GRAIN REFINER, in rods with a diameter of 9.5 mm, having BOTH of 
the following:
  (a) titanium content NOT greater than 6 %;
  (b) boron content NOT greater than 2 %

SLATS, ROLLER SHUTTER, hollow section, with OR without acrylic 
windows, having ALL of the following:
  (a) aluminium profile outer;
  (b) PVC profile inner;
  (c) polyurethane foam core

RODS, DRAWN, aluminium, tempered, being round AND/OR polygon 
AND/OR square AND/OR rectangular shaped, having cross section 
dimension NOT less than 7.96 mm and NOT greater than 70.15 mm

BARS OR RODS, aluminium alloy, extruded, complying with 
aerospace material specification AMS-QQ-A-200/8, temper T6 or 
T6511

BARS, ALUMINIUM, alloy 2011 AND/OR alloy 6262, having BOTH of 
the following:
(a) lead content of NOT less than 0.2% and NOT greater 
    than 0.7%;
(b) bismuth content of NOT less than 0.2% and NOT greater 
    than 0.7%

ALUMINIUM RODS, EXTRUDED, being round and/or polygon and/or 
square and/or rectangular shaped, having ALL of the following:
  (a) minimum cross sectional dimension of NOT less than 6 mm
      and NOT greater than 450 mm;
  (b) aluminium alloy 7075;
  (c) tempers T651 and/or T6 and/or T6511

ALUMINIUM RODS, EXTRUDED, being round and/or polygon and/or 
square and/or rectangular shaped, having ALL of the following:
  (a) minimum cross sectional dimension of NOT less than 6 mm 
      and NOT greater than 450 mm;
  (b) aluminium alloy 2011;
  (c) tempers T3 and/or T6 and/or T8

ALUMINIUM RODS, EXTRUDED, being round and/or polygon and/or 
square and/or rectangular shaped, having ALL of the following:
   (a) minimium cross sectional dimension of NOT less than 6 mm
       and NOT greater than 450 mm;
   (b) aluminium alloy 6262;
   (c) tempers T6 and/or T9

WIRE, aluminium, complying with Australian Standard 2848 
(AS 2848)

RODS, aluminium 1350, EC grade, non-extruded, conforming to 
Australian Standard B233-97 (2007) (ASTM B233-97), having a 
diameter NOT less than 8.0 mm and NOT greater than 14.0 mm

WIRE, aluminium welding, metal inert gas, dia 0.8 mm or greater
 but NOT exceeding 2.4 mm

WIRE, aluminium, having a purity NOT less than 99.80%

WIRE, aluminium, unalloyed, having ALL of the following:
  (a) in coils OR reels NOT less than 750 kg each;
  (b) cross sectional dimension NOT less than 4.2 mm;
  (c) complying with Australian Standard 2848 (AS2848)

WIRE RODS, aluminium, conforming to Australian Standard 
AS 2848.1-1998

GRAIN REFINERS, in coils with a diameter of 9.5 mm, having BOTH 
of the following:
  (a) titanium content NOT greater than 6 %;
  (b) boron content NOT greater than 2 %

WIRE RODS, aluminium, conforming to Australian Standard 
AS 2848.1-1998

WIRE, aluminium welding, metal inert gas or tungsten inert gas

WIRE, aluminium, alloyed, having ALL of the following:
  (a) in coils OR reels NOT less than 750 kg each;
  (b) cross sectional dimension NOT less than 4.2 mm;
  (c) complying with Australian Standard 2848 (AS2848)

SHEET, aluminium, 99.99% purity

SHEET OR COIL, aluminium, having ALL of the following:
   (a) purity NOT less than 99.7% aluminium;
   (b) electrochemically brightened;
   (c) continuously anodised;
   (d) gauge 0.3 mm OR greater, but NOT exceeding 0.9 mm;
   (e) whether or not PVC coated;
   (f) reflectivity NOT less than 84% as measured according to
       DIN 5036

PLATES, SHEETS OR STRIP, aluminium, whether or not in coils, 
being ANY of the following aluminium designations:
  (a) 1050;
  (b) 1060;
  (c) 1070;
  (d) 1100;
  (e) 1145;
  (f) 1200;
  (g) 1235;
  (h) 1350

PLATES, SHEETS OR STRIP, ALUMINIUM, non alloyed, whether or not 
in coils, having a thickness exceeding 0.2 mm

LAMINATES, thickness NOT less than 0.8 mm

SHEET OR COIL, aluminium, having ALL of the following:
   (a) thickness NOT exceeding 3 mm;
   (b) electrical conductivity, minimum 61% IACS at 20 degrees C;
   (c) 0.2% proof stress, maximum 40 MPa (AS 1391);
   (d) elongation, minimum 30% (AS 1391);
   (e) width NOT exceeding 1 545 mm

TREAD PLATE, aluminium, in sheets and coil

SHEET OR PLATE to AA Specifications 7075-T651 or 6061-T651

STRIP, aluminium, in coil form, having BOTH of the following:
   (a) thickness NOT exceeding 2 mm;
   (b) width exceeding 1 930 mm

SHEET, PLATES OR STRIP, aluminium alloy ASTM 7000 series

PLATE, aluminium alloy, 6061, exceeding 3 mm in thickness

SHEETS, composite, having BOTH of the following:
  (a) aluminium hydroxide OR low density polyethylene core;
  (b) inner AND outer skin of aluminium sheet

PLATES, SHEETS OR STRIP, aluminium alloy, whether or not in 
coils, being ANY of the following:
  (a) alloy 3003;
  (b) alloy 5052;
  (c) alloy 5005;
  (d) alloy 5083;
  (e) alloy 8006;
  (f) alloy 8011 having a thickness NOT less than 0.40 mm;
  (g) alloy 8079;
  (h) alloy 3104 having a thickness NOT less than 0.45 mm;
  (i) alloy 3004 having a thickness NOT less than 0.45 mm;
  (j) alloy 3105 having a thickness NOT less than 0.32 mm

PLATES, SHEETS OR STRIP, ALUMINIUM ALLOY, whether or not in 
coils, having a thickness exceeding 0.2 mm

SHEETS AND/OR COILS AND/OR STRIPS AND/OR PLATES, aluminium 
alloy, having a thickness greater than 0.4 mm

COILS, ALUMINIUM ALLOY SHEET AND/OR STRIP, being ANY of the 
following:
  (a) alloy 3105, thickness NOT less than 0.32 mm;
  (b) alloy 3004, thickness NOT less than 0.45 mm;
  (c) alloy 5005

LAMINATES, ALUMINIUM SHEET, comprising ALL of the following:
   (a) kraft paper backing;
   (b) anodised aluminium coating;
   (c) thickness (aluminium only) of NOT less than 0.30 mm

ALUMINIUM ALLOY STRIPS

ALUMINIUM SHEET OR PLATE, alloy numbers 5083 OR 5383 (International
 Standard), min width 1 200 mm, but NOT including sheet OR plate
 having BOTH of the following:
   (a) gauge in the range 3 mm to 4 mm (both inclusive);
   (b) width less than 1 600 mm

PLATES, SHEETS OR STRIP, ALUMINIUM, non alloyed, whether or not 
in coils, in forms other than rectangular or square, having a 
thickness exceeding 0.2 mm

SLUGS, aluminium

PLATES, SHEETS OR STRIP, ALUMINIUM ALLOY, whether or not in 
coils, in forms other than rectangular or square, having a 
thickness exceeding 0.2 mm

ALUMINIUM ROUNDS AND/OR CIRCLES

FOIL, BRAZING, ALUMINIUM, in coils, having ALL of the following:
  (a) thickness NOT greater than 0.12 mm;                       
  (b) width NOT greater than 40 mm;                             
  (c) aluminium cladding on both sides;                         
  (d) cladding ratio NOT greater than 12%

FOIL, ALUMINIUM, rolled, not backed, not further worked, having 
a thickness NOT exceeding 0.2 mm

FOIL, ALUMINIUM, having ALL of the following:
  (a) length NOT less than 5 m and NOT greater than 75 m;
  (b) width NOT greater than 45 cm;
  (c) thickness NOT less than 10 microns and NOT greater than
      15 microns

FOIL, Aluminium, having a thickness NOT less than 0.00635 mm and 
NOT greater than 0.180 mm

FOIL, ALUMINIUM, having a thickness NOT greater than 0.180 mm

FOIL, ALUMINIUM, having a thickness NOT exceeding 0.15 mm

FOIL, BRAZING, ALUMINIUM, in coils, having ALL of the following:
  (a) thickness NOT greater than 0.12 mm;                       
  (b) width NOT greater than 40 mm;                             
  (c) aluminium cladding on both sides;                         
  (d) cladding ratio NOT greater than 12%

FOIL, aluminium, conforming to BS 1683, having ALL of the
 following:
   (a) chemical composition in compliance with BS 1470;
   (b) total thickness (gauge) 14 microns or greater but NOT
       exceeding 40 microns;
   (c) coated on both sides with EITHER vinyl or nitrocellulose
       lacquers OR one side vinyl and the other side nitrocellulose
       lacquers, having a coating grammage 4 g/sq m or greater but
       NOT exceeding 6 g/sq m

FOIL, ALUMINIUM, coated or laminated on both sides with
 polypropylene, polyethylene OR polyethylene terephthalate (PET),
 printed only on one side, aluminium foil portion having a thickness
 NOT exceeding 10 microns

FOIL, aluminium brazing material, comprising 7000 series core alloy,
 clad on both sides with an alloy consisting of magnesium and silicon
 additions

FOIL, aluminium, printed, thickness 10 microns

FOIL, ALUMINIUM, having ALL of the following:
  (a) aluminium layer thickness NOT greater than 51 microns;
  (b) lacquer coating on one side;
  (c) acrylic primer coating on the other side,
with OR without EITHER of the following:
        (i)  coloured layer;
        (ii) printing

FOIL, aluminium, printed,  having a thickness of NOT less than 
10 microns and NOT greater than 12 microns

FOIL, ALUMINIUM, not backed, further worked than rolled, having 
a thickness NOT exceeding 0.2 mm

FOIL, Aluminium, having a thickness NOT less than 0.00635 mm and 
NOT greater than 0.180 mm

FOIL, ALUMINIUM, laminated on both sides having ALL of the 
following:
  (a) one side laminated with polyvinyl chloride (PVC);
  (b) other side laminated with oriented polyamide;
  (c) thickness of aluminium foil exceeding 40 microns but not
      exceeding 60 microns

ALUMINIUM AND POLYETHYLENE COMPOSITE FOIL, being polyethylene core
 laminated on both sides with aluminium foil, having BOTH of the
 following:
   (a) total thickness NOT exceeding 65 microns;
   (b) width NOT exceeding 550 mm

FOIL ALUMINIUM, having BOTH of the following:
  (a) thickness NOT exceeding 25 micron;
  (b) heat seal lacquered on one side

ALUMINIUM FOIL, soft temper, coated or printed on one side with
 lacquer, other side coated with polypropylene co-extrusion

FOIL, aluminium, conforming to BS 1683, having ALL of the
 following:
   (a) chemical composition in conformance with BS 1470;
   (b) total thickness (gauge), including coating, 30 microns or
       greater but NOT exceeding 100 microns;
   (c) coated and laminated in the following construction:
         (i) lacquer;
        (ii) aluminium foil;
       (iii) paper;
        (iv) aluminium foil;
         (v) wax

TAPE, masking, being aluminium foil laminated to glass cloth and
 having a silicone adhesive, capable of withstanding temperatures
 of NOT less than 200 degrees C for 3 h

FOIL, LAMINATED, INDUCTION HEAT SEALABLE

FOIL, laminated, having ALL of the following:
   (a) polyester film thickness NOT exceeding 15 um;
   (b) aluminium layer thickness NOT exceeding 45 um;
   (c) polypropylene layer NOT exceeding 45 g/sq m;
   (d) tensile strength NOT less than 90 N/15mm
   (e) retortable

FOIL, aluminium having a thickness NOT greater than 40 micron, 
coated on one side with a nitrocellulose primer AND coated on 
the other side with polyethylene OR polypropylene

FOIL, aluminium having a thickness NOT greater than 60 micron, 
coated on one side with a nitrocellulose primer and coated on 
the other side with polyethylene or polypropylene, with OR 
without printing OR colouring

ROOF FLASHING, with OR without aluminium mesh, including ALL of 
the following:
  (a) colour coated aluminium foil;  
  (b) polyethylene terephthalate foil; 
  (c) polyethylene terephthalate fleece;
  (d) high density polyethylene protective foil;
  (e) self-adhesive butyl layer

FOIL, ALUMINIUM, backed

LAMINATE, unprinted, in rolls having a width NOT greater than 
140 mm, comprising ALL of the following:
(a) kraft paperboard having a thickness NOT greater than 59 g/sq 
m;
(b) polyrthylene layer having a thickness NOT greater than 18 
ums;
(c) aluminium foil layer having a thickness NOT greater than 10 
ums;
(d) ionomer resin layer having a thickness NOT greater than 20 
ums

FOIL, silver lacquered and laminated by wax to paper

LAMINATES, ALUMINIUM FOIL, comprising BOTH of the following:
   (a) kraft paper backing;
   (b) epoxy OR cellulose base lacquer

FOIL, ALUMINIUM, COATED, having BOTH of the following:
   (a) aluminium layer thickness NOT exceeding 0.09 mm;
   (b) epoxy and/OR polyester coated on one or more sides

FOIL, ALUMINIUM, LAMINATED, having ALL of the following:
   (a) aluminium layer thickness NOT exceeding 95 micrometres;
   (b) polypropylene film thickness NOT exceeding 35 micrometres;
   (c) foil lacquered on one side

SEALING STRIP, ASEPTIC JUICE AND DAIRY PACKAGE, multilayer, heat
 sealing

PIPES, MULTILAYER, ALUMINIUM, having polyethylene covers

TUBING, drawn, seamless, aluminium alloy 7075-T6, having ALL of the
 following:
   (a) an ultimate tensile strength NOT less than 500 mpa;
   (b) an OD NOT exceeding 68 mm;
   (c) a WT NOT exceeding 1 mm

TUBING, drawn, seamless, aluminium Alloy 6061-T6, having ALL
 of the following:
   (a) an ultimate tensile strength NOT less than 250 MPa;
   (b) an OD NOT exceeding 64 mm;
   (c) a WT NOT exceeding 2 mm

TUBING, laminated aluminium alloy, seam welded, clad on both inner
 and outer surfaces with silicon and magnesium alloy

WINDOW CASING JOINT ASSEMBLIES, SUBSEA, having ALL of the 
following:
  (a) upper coupling;
  (b) aluminium joint;
  (c) latch coupling

TUBES, ALUMINIUM ALLOY, conforming to designation 3003 as 
defined in the Australian Standard AS 2848.1-1998, drawn, 
seamless

COUPLINGS, pipe, comprising body, sealing rings or collars of
 cylindrical shape and nuts and spare sealing rings
 For the purposes of TC 8437156 when the pipe is inserted into
 the body of the coupling the nut is progressively tightened,
 forcing the sealing ring which fits around the pipe along the
 inside conical section of the body, causing the sealing ring to
 cut into the surface of the pipe and to throw up in front of it
 a ridge of displaced metal thus forming a metallic interlock

FITTINGS, fire brigade hose, "Storz" pattern

PIPE FITTINGS, NPT (NATIONAL PIPE THREAD)

PIPE FITTINGS, aluminium alloy, being ANY of the following:
         (i) couplings;
        (ii) elbows;
       (iii) end caps;
        (iv) tee joints;
         (v) flanged tips;
        (vi) sockets;
       (vii) plugs,
with OR without a rubber gasket

COUPLINGS, MUFF, cast aluminium

FITTINGS, CAMLOCK, aluminium

CAMLOCKS, aluminium

HATCHES, hinged, aluminium

COMPONENTS, ROBOTIC RACKING SYSTEM, being ANY of the following:
  (a) column spacer;
  (b) bin bracket;
  (c) track support plate;
  (d) track profile;
  (e) floor rail;
  (f) grid corner cover;
  (g) safety barrier;
  (h) handrail;
  (i) grid fastening bracket;
  (j) cubic connectors

PANEL EDGE CONNECTORS AND/OR COVERINGS, with OR without fittings

PLATFORMS, UNDERDECK, modular, aluminium

PARTS, SHORING SYSTEM, being ANY of the following:
  (a) platforms;
  (b) jacks;
  (c) braces;
  (d) handrails;
  (e) legs;
  (f) frames;
  (g) ladders;
  (h) ledgers, 
with OR without ANY of the following:
           (i) hooks;
          (ii) rivets;
         (iii) bolts;
          (iv) nuts;
           (v) clamps;
          (vi) retainers

COMPONENTS, GRID STORAGE PICKING AND RETRIEVAL SYSTEM, being 
ANY of the following:
  (a) aluminium profile columns having a length NOT less than 
      5 286 mm and NOT greater than 5 290 mm;
  (b) grid fence columns NOT less than 6 481 mm and NOT greater 
      than 7 490 mm;
  (c) grid double track profile having a length NOT less than 
      5 760 mm and NOT greater than 5 765 mm;
  (d) grid single track profile, top AND/OR bottom, having a  
      length NOT less than 5 640 mm and NOT greater than 
      5 645 mm;
  (e) spacer column;
  (f) grid support feet;  
  (g) floor rails NOT less than 2 895 mm NOT greater than 
      2 900 mm;
  (h) grid track support AND/OR cover plates;
  (i) service wall frame;
  (j) grid corner brackets;
  (k) robot safety barrier;
  (l) handrails;
  (m) port carousel frame;
  (n) bin brackets

SUPPORT LEGS, OFF FLOOR PARTITION, adjustable, whether OR not 
including ANY of the following:
  (a) frame;
  (b) adjustable inserts;
  (c) base

PARTS, DEMOUNTABLE FLOOD CONTROL CONTAINMENT SYSTEM, conforming 
to British Standard PAS 1188-4, (BSI PAS 1188-4), being EITHER 
of the following:
  (a) interlocking flood boards with seals;
  (b) support covers

PARTS, FORMWORK, aluminium, being ANY of the following:
  (a) panels;
  (b) compensation sections;
  (c) toothed beams;
  (d) heads;
  (e) brackets;
  (f) squares;
  (g) clamps;
  (h) slab handrails;
  (i) boxes;
  (j) beams;
  (k) slabs;
  (l) props;
  (m) prop extensions;
  (n) tripods;
  (o) trestles;
  (p) module bearing towers;
  (q) jacks;
  (r) closing sections;
  (s) stirrups

PARTS, SCAFFOLDING, STAND AND STAGE, aluminium, modular, having 
ALL of the following:
  (a) aluminium subframes AND braces;
  (b) load rating NOT less than 7.5 kN/m2;
  (c) coated plywood panels;
  (d) panel weight NOT greater than 37 kg

MODULAR PROTECTION SYSTEM, having ALL of the following:
  (a) wall cassettes;
  (b) corner cassettes;
  (c) connection rails

SCAFFOLDING COMPONENTS, being ANY of the following:
  (a) couplers;
  (b) hopups;
  (c) ladder access putlogs;
  (d) ladder beams;
  (e) ledgers;
  (f) planks;
  (g) stairs;
  (h) tie bars;
  (i) transoms

PARTS, GLASSHOUSE STRUCTURE, being ANY of the following:
  (a) gutters;
  (b) ridges;
  (c) posts;
  (d) plates;
  (e) profiles;
  (f) strips;
  (g) roof bars;
  (h) gable bars;
  (i) vent panel supports;
  (j) gutter and post supports;
  (k) brackets;
  (l) connectors;
  (m) flashings;
  (n) clamps;
  (o) clips;
  (p) water collectors

HANDRAILS, anti-ligature

HELIPAD, aluminium

CEILING GRIDS, consisting of aluminium cross points and
 profiles

CONTAINERS, cryogenic, of the insulated OR vacuum wall type, using
 liquified gas as the refrigerant medium to store goods (OTHER
 THAN gas), at a temperature below - 100 degrees C

STERLISATION CONTAINERS, MEDICAL INSTRUMENT, including ALL of 
the following:
  (a) tamper evident locking mechanism;
  (b) anodised aluminium lid having EITHER of the following:
          (i) paper filter;
         (ii) reusable barrier,
  (c) container base dimensions, being ANY of the following:
          (i) 310 x 131 x 28 mm;
         (ii) 310 x 131 x 56 mm;
        (iii) 310 x 131 x 85 mm;
         (iv) 312 x 183 x 36 mm;
          (v) 312 x 183 x 54 mm;
         (vi) 312 x 183 x 72 mm;
        (vii) 312 x 183 x 85 mm;
       (viii) 312 x 183 x 122 mm;
         (ix) 211 x 140 x 41 mm;
          (x) 230 x 161 x 55 mm;
         (xi) 230 x 161 x 73 mm;
        (xii) 230 x 161 x 90 mm;
       (xiii) 230 x 161 x 120 mm

STERLISATION CONTAINERS, MEDICAL INSTRUMENT, including BOTH of
the following:
  (a) locking mechanism with tamper evident lock;
  (b) anodised aluminium lid having EITHER of the following:
          (i) paper filter;
         (ii) reusable barrier,
  (c) container base dimensions, being ANY of the following:
          (i) 297 x 274 x 88 mm;
         (ii) 297 x 274 x 123 mm;
        (iii) 297 x 274 x 138 mm;
         (iv) 297 x 274 x 188 mm;
          (v) 297 x 274 x 248 mm;
         (vi) 462 x 274 x 88 mm;
        (vii) 462 x 274 x 123 mm;
       (viii) 462 x 274 x 138 mm;
         (ix) 462 x 274 x 188 mm;
          (x) 585 x 274 x 88 mm;
         (xi) 585 x 274 x 123 mm;
        (xii) 585 x 274 x 138 mm;
       (xiii) 585 x 274 x 188 mm;
        (xiv) 585 x 274 x 248 mm

CAPSULE SHELLS, COFFEE, aluminium

CAPSULE SHELLS, thermoformed plastic, having an aluminium foil 
closure at the base

STERILISATION CONTAINERS, MEDICAL INSTRUMENT, having BOTH of 
the following;
  (a) reusable labyrinth filters;
  (b) bi-metal tamper indicator

CONTAINERS, ALUMINIUM, CYLINDRICAL, having diameter LESS than 
35 mm

CANS, BEVERAGE, aluminium, capacity NOT exceeding 255 ml

CYLINDERS, aluminium, compressed gas, seamless, having a water
 capacity NOT exceeding 2 L

CYLINDERS, compressed gas, seamless, having a water capacity
 NOT more than 1 L

CONTAINERS, cryogenic, of the insulated or vacuum wall type,
 having a liquefied gas capacity of 175 L or less

DEWARS, PRESSURISED OR LIQUEFIED GAS, capacity NOT exceeding 400 L

CYLINDERS, seamless aluminium, with external wrapping of fibreglass
 fibreyarn, and/or carbon fibreyarn, and/or polyamide fibreyarn

CYLINDERS, compressed gas, seamlessly extruded aluminium, having 
welded end caps

CYLINDERS, seamless, compressed gas, aluminium, test pressure of
 NOT less than 1.75 MPA

COOKING POTS, with OR without lids, having a diameter NOT 
greater than 24 cm

ROASTING PANS, with OR without lids, including BOTH of the 
following:
  (a) roasting racks;
  (b) handles

SETS, COOKWARE, non-stick coating, consisting ONLY of articles 
of two OR more of the following categories:
  (a) cooking pots with OR without lids;
  (b) casserole pans with OR without lids;
  (c) frypan with OR without lids;
  (d) saucepans with OR without lids;
  (e) roasting pots with OR without lids;
  (f) multi-purpose turner

COOKWARE, non-stick coating, with OR without lids, consisting 
ONLY of articles of two OR more of the following categories, 
whether OR not as sets: 
  (a) saucepan;
  (b) frying pan;
  (c) grill pan;
  (d) saute pan;
  (e) roasting pan;
  (f) steamer basket AND/OR insert

COOKWARE, ASSORTED, with OR without lids AND/OR non-stick 
coating, having two or more of the following:
  (a) milk pans;
  (b) saucepans;
  (c) universal steamers;
  (d) casserole dishes AND/OR pots;
  (e) dutch AND/OR french ovens;
  (f) steamer inserts;
  (g) stock pots;
  (h) fry pans;
  (i) pasta inserts;
  (j) steamer baskets;
  (k) roasters;
  (l) baking dishes AND/OR pans;
  (m) oven pans;
  (n) saute pans;
  (o) chefs pans;
  (p) woks;
  (q) grills;
  (r) griddles;
  (s) stew pots;
  (t) roasting pans with rack;
  (u) double boilers

SETS, COOKWARE, with OR without an internal non-stick coating, 
consisting of ALL of the following:
  (a) roasting pot;
  (b) frying pans;
  (c) glass lid; 
  (d) multi-purpose slotted turner

COOKWARE, having an internal non-stick coating, being ANY of the 
following:
  (a) casserole dishes with OR without lids;
  (b) frypans with OR without lids;
  (c) saucepans with OR without lids;
  (d) baking dishes with OR without lids;
  (e) grillets;
  (f) skillets;
  (g) gourmet griddles;
  (h) woks with OR without lids;
  (i) steamers with OR without lids;
  (j) oven pans with OR without lids;
  (k) baking pans with OR without lids;
  (l) baking dishes with OR without lids;
  (m) dutch ovens with OR without lids;
  (n) double boilers with OR without lids;
  (o) griddle pans with OR without lids;
  (p) lids

UTENSILS, HOUSEHOLD, aluminium, being ANY of the following: 
   (a) baskets;
   (b) bottle baskets; 
   (c) buckets; 
   (d) candle snuffers;
   (e) child safety gates; 
   (f) coal scuttles or hods; 
   (g) cotton bud dispenser boxes; 
   (h) dustbins;
   (i) flower boxes or planters; 
   (j) hip flasks;
   (k) letter boxes;
   (l) luncheon boxes;
   (m) movable boot scrapers; 
   (n) plant pots or hanging planters or plant tubs or plant 
       muck boxes and/or plant saucers; 
   (o) plant movers;
   (p) plate stands; 
   (q) rubbish bins; 
   (r) shoe trees; 
   (s) shower racks or shower shelves;
   (t) flat irons stands; 
   (u) storage boxes or storage bins or storage tins; 
   (v) tissue paper holders or enclosures;
   (w) magazine holders;
   (x) trellis;
   (y) vacuum hose holders;
   (z) watering cans; 
  (aa) wine racks

UTENSILS, KITCHEN, aluminium, being ANY of the following:
   (a) bag dispensers; 
   (b) bottles; 
   (c) bowls; 
   (d) bread bins; 
   (e) canisters; 
   (f) capacity measurers; 
   (g) colanders; 
   (h) cutlery or kitchen utensils stands and/or racks and/or 
trays; 
   (i) dish drainers and/or dish drying racks; 
   (j) milk cans; 
   (k) double boilers and/or inserts; 
   (l) fish kettles; 
   (m) food or cake domes;
   (n) funnels; 
   (o) glass racks;
   (p) gridirons; 
   (q) grilling racks; 
   (r) hob guards; 
   (s) wrapping and/or foil holders; 
   (t) jugs; 
   (u) kettles;
   (v) knife boxes or knife racks; 
   (w) non electric coffee pots and/or percolators; 
   (x) paper towel holders; 
   (y) pasta inserts; 
   (z) plate racks and/or holders; 
  (aa) preserving pans and/or jars; 
  (ab) pressure cookers; 
  (ac) rinsing baskets and/or strainers; 
  (ad) salad washers; 
  (ae) pressure cooker separating compartments; 
  (af) shakers; 
  (ag) sink cover plates; 
  (ah) spice or condiment racks and/or stands; 
  (ai) splatter screens and/or guards; 
  (aj) food bowl stands; 
  (ak) steamers and/or inserts; 
  (al) storage tins and/or storage jars and/or storage caddies; 
  (am) sugar tins; 
  (an) suspension rails; 
  (ao) trivets; 
  (ap) wine racks

BOTTLES, DRINK, aluminium, with OR without EITHER of the 
following:
  (a) insulated pouch;
  (b) carabiner

CAMPING EQUIPMENT, being ANY of the following:
   (a) windshields;
   (b) kettles;
   (c) pan lifting handles

STOVE SETS, portable, being all weather outdoor spirit burner types,
 comprising ALL of the following:
   (a) frying pan;
   (b) saucepan;
   (c) spirit burner with screw cap;
   (d) windshield;
   (e) handle

CAMPING EQUIPMENT, being ANY of the following:
   (a) soup kettles;
   (b) saucepans;
   (c) frypans;
   (d) plates;
   (e) water kettles complete with filter;
   (f) mugs

SINK STRAINERS, aluminium

HOUSEHOLD ARTICLES, aluminium, being EITHER of the following:
  (a) buckets;
  (b) hot water bottles

OVENS, SOLAR

TABLEWARE, aluminium, being ANY of the following:
   (a) baskets; 
   (b) bottles; 
   (c) bowls; 
   (d) card holders; 
   (e) cruets;
   (f) cups; 
   (g) decanters; 
   (h) dishes; 
   (i) drip stoppers; 
   (j) egg cups; 
   (k) fondues; 
   (l) food or cake domes; 
   (m) non electric food warmers; 
   (n) ice buckets; 
   (o) jugs; 
   (p) knife or chopstick rests;
   (q) mugs; 
   (r) mustard pots;
   (s) napkin and/or place card stands; 
   (t) non electric coffee pots or percolators; 
   (u) plates; 
   (v) plate stands; 
   (w) platters or serving plates; 
   (x) salad bowls; 
   (y) salt cellars; 
   (z) salt or pepper shakers; 
  (aa) sauce boats; 
  (ab) saucers; 
  (ac) serviette or napkin rings; 
  (ad) tea pot stands or cake stands; 
  (ae) sugar basins or shakers; 
  (af) table cloth clips; 
  (ag) table place mats or coasters; 
  (ah) sugar bowls and/or milk jugs and/or trays;
  (ai) tea infusers or tea honey sticks or tea dishes; 
  (aj) tea pots; 
  (ak) tea strainers; 
  (al) toast racks; 
  (am) trays; 
  (an) trivets; 
  (ao) tumblers; 
  (ap) tureens; 
  (aq) wine cooling buckets; 
  (ar) wine pouring cradles; 
  (as) wine bottle stands

COFFEE MAKERS, expresso, domestic, non-electric, but NOT including
 coffee making machines which are fitted for connection to mains
 water supply

DISPENSERS, syphon, whipped cream

SYPHONS, soda

UTENSILS, KITCHEN, aluminium, being EITHER of the following:
  (a) egg rings;
  (b) simmer ring-heat diffuser

BINS, WASTE, COFFEE GRIND, aluminium AND rubber

BOTTLES, BEVERAGE, aluminium, leak proof

SANITARY WARE, aluminium, being ANY of the following:
  (a) bed pans;
  (b) chamber pots;
  (c) eye baths;
  (d) shower racks;
  (e) spittoons;
  (f) toilet brush holders;
  (g) toilet paper holders;
  (h) toilet roll stands;
  (i) toothbrush holders;
  (j) wash basins

NUT INSERTS, threaded, aluminium

FITTINGS, tank or storage drum pressure relief, being ANY of the
 following:
   (a) drum vent adaptors;
   (b) drum vents;
   (c) flame arrester rodding and sampling unit;
   (d) flame arrester vents;
   (e) flame arresters;
   (f) flash arrester fill units;
   (g) gauge hatches;
   (h) loading and unloading units

RUPTURE (BURSTING) DISCS, pressure system, whether or not
 incorporating vacuum supports

SHELLS OR BUSHES, being aluminium clamp inserts for hydraulic
 pipes and tubes

LADDER LEVELLER, aluminium, incorporating an adjustable steel
 mechanism, being an attachment to the legs of the ladder to allow
 stabilizing of the ladder on an uneven surface

ARRESTERS, flame

FERRULES, oval tubular cross section, wire rope clamping or
 splicing

STRAPS, COLLECTOR, ALUMINIUM SMELTING POT

HOUSINGS, PROTECTIVE, CLOSED CIRCUIT TELEVISION CAMERAS

HANDBAGS, PURSES OR WALLETS, of aluminium mesh

ELECTRICAL CONDUCTOR HOLDERS, mounted on conductor support arms,
 side arms, extension arms, lift arms or auxiliary arms, constructed
 from fibreglass reinforced plastic and conforming to ASTM F-711

CROCHET HOOKS

SOCKET HOLDER RAILS, 3/8 " drive

SOCKET HOLDER RAILS, 1/2 " drive

FRAMES,FLYING LEAD ORIENTATION TOOL, SUBSEA, aluminium

HOUSINGS, VALVE GUARD ASSEMBLY, aluminium alloy, with OR without 
split ring

AWNING IDLERS, aluminium

AWNING ARMS, articulated, aluminium, having EITHER of the 
following:
  (a) chain;
  (b) springs

CONTAINER AND/OR SHELTER CORNER FITTINGS, aluminium alloy

MESH, aluminium, rigid, plain weave, pre-finished, having ALL of 
the following:
  (a) open area NOT less than 33% and NOT greater than 46%;
  (b) weight NOT less than 1.9 kg/m2 and NOT greater than 
      2.7 kg/m2;
  (c) thickness NOT less than 2.5 mm and NOT greater than 4 mm

PARTS, AWNING, being one OR both of the following:
  (a) cassette end covers;
  (b) joints

CASES, aluminium, having all of the following:
  (a) internal plywood support;
  (b) length NOT less than 1 550 mm and NOT greater than 
      1 650 mm;
  (c) width NOT less than 1 250 mm and NOT greater than 1 350 mm;
  (d) depth NOT less than 200 mm and NOT greater than 300 mm

PANELS, DOME SCREEN, SIMULATOR RIDE, having NOT less than 97% 
aluminium content

CONDUCTOR RAILS, OVERHEAD, with OR without fishplates

ATTENUATORS, IMPACT ENERGY ABSORBING, aluminium, truck OR 
trailer mountable, including ALL of the following:
  (a) impact energy absorbing enclosures;
  (b) securing AND energy absorbing tubes;
  (c) mounting plates

FITTINGS, SAFETY HARNESS, aluminium, being ANY of the following:
  (a) spigots;
  (b) carriage connectors;
  (c) baseplates;
  (d) energy absorbing connectors;
  (e) buckles;
  (f) connection adjusters;
  (g) O-rings;
  (h) tamper proof stoppers;
  (i) end anchors;
  (j) rigging plates

COLUMNS, POWER AND DATA DISTRIBUTION, aluminium, hollow, 
including ALL of the following:
  (a) plastic coverings;
  (b) earth clamps;
  (c) mounting instructions

POLES, aluminium, anodized, hollow, with front plastic coverings

COVER PLATES, switch AND/OR power point

PEELBOARDS, BREAD PRODUCTION LINE, multilayered, having NOT less 
than ANY four of the following:
  (a) aluminium alloy base panel;
  (b) acrylonitrile butadiene styrene (ABS) surface layers;
  (c) aluminium alloy sides;
  (d) zinc alloy corner joints;
  (e) weight NOT greater than 9.2 kg per m2;
  (f) dimensions NOT greater than 1 250 mm x 1 250 mm

EXTENSION POLES, aluminium

CARABINERS, decorative, NOT including fall protection carabiners

AIR VENTS, aluminium, having swirl air diffusing slats

STERILISATION TRAYS, medical

STANDS, MITRE SAW, aluminium, having BOTH of the following:
  (a) NOT less than 2 wheels;
  (b) weight load capacity NOT less than 95 Kg

GUIDE RAILS, CIRCULAR SAW

BOARDS, SIGN, A-frame

POLES, MOP, telescopic

FERRULES, wire rope splicing

FRAMES AND/OR STAY PLATES, TRANSIT ASSEMBLY, multi-cable AND/OR 
multi-pipe AND/OR multi-conduit

STANDS, MITRE SAW, aluminium, having BOTH of the following:
  (a) adjustable support beam;
  (b) weight load capacity NOT less than 170 kg

HANDLES, BROOM, having BOTH of the following:
  (a) length NOT less than 1.35 metres;
  (b) width NOT less than 21 millimetres

CASES, aluminium, with or without internal dividers, having ALL 
of the following:
  (a) Medium Density Fibreboard (MDF) and/or foam lining;
  (b) length NOT less than 300 mm and NOT greater than 500 mm;
  (c) width NOT less than 200 mm and NOT greater than 350 mm;
  (d) depth NOT less than 50 mm and NOT greater than 200 mm

CASINGS, JUNCTION BOXES, aluminium

STANDS, FLAT SCREEN DISPLAY, aluminium

RAMPS, VEHICLE, ANIMAL LOADING, having ALL of the 
following:
  (a) hinges;
  (b) rubber feet;
  (c) vehicle attaching strap;
  (d) carry bag

FITTINGS, FALL PROTECTION, being ANY of the following:
  (a) rope grabs;                                     
  (b) adjusters;                                      
  (c) hooks;                                          
  (d) karabiners;                                     
  (e) connectors;                                     
  (f) ascenders;                                      
  (g) descenders;                                     
  (h) tensioners

TILES OR PANELS, CEILING, being ANY of the following:
  (a) micro-perforated;
  (b) pan;
  (c) grille;
  (d) linear