Tariff Concession Orders

TYRE CORD FABRIC, polyamide

TYRE CORD FABRIC, polyester

TAPE, MARKING, with heat activated adhesive

SUNSCREEN FABRIC, having ALL of the following:
  (a) PVC coated polyester yarn, having ANY of the following:
          (i) 2 by 2 strand basket weave;
         (ii) alternating 1 by 1  AND 1 by 3 strand twill weave;
        (iii) 2 by 1 strand weave,   
  (b) width NOT less than 220 cm;
  (c) weight NOT less than 445 gsm and NOT greater than 660 gsm

FABRICS, POLYESTER AND/OR COTTON AND POLYESTER AND/OR RAYON AND 
POLYESTER, coated on one side with polyvinyl chloride, having 
ALL of the following:
  (a) thickness NOT less than 0.3 mm and NOT greater 
      than 1.8 mm;
  (b) width NOT less than 1 100 mm and NOT greater than 2 100 mm;
  (c) weight NOT less than 200 g/m2 and NOT greater 
      than 1 800 g/m2;
  (d) length NOT less than 15 m

MESH, INSECT, being woven PVC coated polyester yarn

FABRIC, reflective, having BOTH of the following:
   (a) a layer of glass beads ("lenses") bonded to the fabric
       with adhesive;
   (b) an outer layer of polyurethane resin

FABRIC, woven, 100% nylon, laminated on one side with polyurethane,
 having All of the following:
 (a) minimum weight 220 gms per square metre;
 (b) conforms to the requirements of AS2259/1988;
 (c) base fabric weight NOT exceeding 140 gms per square metre

FABRIC, ACRYLIC, woven staple yarn, fluorocarbon treated 
topside, polyurethane on underside, having ALL of the following:
  (a) hydrostatic pressure resistance NOT less than 700 mm;
  (b) weight 315 grams per square metre;
  (c) tensile strength 1400 N (warp) and 700 N (weft) 
For the purpose of this order, all measurements have a tolerance 
of + or - 5%

WOVEN FABRIC, laminated with two OR more layers of polyurethane
 film, conforming to US Federal Aviation Administration (FAA)
 Standard TSO-C13f

TAPE, MARKING, with heat activated adhesive

FABRIC, nylon, width NOT greater than 50 mm, coated with hot melt
 polyurethane adhesive

FASTENING MATERIAL, hook and loop, being a knitted fabric with a
 tufted pile, whether or not coated with adhesive on one side

FABRICS, KNITTED, flame retardant, anti-microbial, anti-fungal, 
having ALL of the following:
  (a) polyamide base fabric weight NOT less than 110 gm/2 and
      NOT greater than 170 gm/2;
  (b) polyurethane layer weight NOT less than 80 gm/2 and NOT  
      greater than 130 gm/2;
  (c) width NOT less than 1 200 mm and NOT greater than 1 500 mm

FABRICS, KNITTED, having ALL of the following:
  (a) polyester backing weight NOT less than 100 g/m2 and NOT 
      greater than 200 g/m2;
  (b) polyurethane layer weight NOT less than 130 g/m2 and NOT
      greater than 200 g/m2;
  (c) width NOT less than 1 300 mm

FABRIC, KNITTED, width NOT less than 200 cm

FABRIC, woven cotton base, polyurethane covered on one side

RETROREFLECTIVE MATERIAL, having CIL values for the relevant
 chromaticity co-ordinates NOT less than those specified in AS1906,
 AS2142 or AS2259

FABRIC, rayon or rayon/cotton, laminated on one side with
 polyethylene film, coated on the reverse side with pressure
 sensitive adhesive

TAPE, HOOK AND LOOP, nylon or polyester, woven, pressure sensitive
 or not

FABRIC, lampshade, being polystryene sheeting laminated on one side
 with a textile material

TAPE, fabric base, coated on one side with plastic

FABRIC, FUSIBLE INTERLINING, of man-made fibre, warp knitted with
 a dot type adhesive coating of polyamide copolymer with between
 20 and 170 dots/sq cm applied over the total surface of the
 fabric

FABRIC, lampshade, being cotton laminated on one side with
 polystyrene sheeting

FABRIC, acrylic, in rolls, dyed, having ALL of the following:
  (a) weight NOT less than 280 gsm and NOT greater than 340 gsm;
  (b) warp tensile strength NOT less than 1 350 N;
  (c) weft tensile strength NOT less than 850 N;
  (d) fluorocarbon treated one side coating OR acrylic one side
      coating

FABRIC, woven polyethylene, coated on one side with 
polyethylene, having ALL of the following:
  (a) in rolls, having a width NOT greater than 1 550 mm;
  (b) extruded polyethylene base fabric tapes, having a tape 
      count NOT greater than 8 x 4 per cm;
  (c) coating weight NOT greater than 40 gsm;
  (d) coated fabric weight NOT greater than 125 gsm;
  (e) machine direction tensile strength NOT less than 7.5 kN/m
      having 20% maximum extension;
  (f) cross direction tensile strength NOT less than 4.5 kN/m
      having 20% maximum extension

FABRIC, woven, polyethylene coated one side, reverse side 
adhesive coated

FABRIC, flat woven, polypropylene coated, having a width NOT 
greater than 1 550 mm

FABRIC, WOVEN POLYPROPYLENE, having ALL of the following:
   (a) flat woven, NOT greater than 1 250 mm wide;
   (b) slit edge OR tucked selvedge;
   (c) coated with polypropylene AND/OR polyethylene of NOT less than
       20 microns thickness

LINOLEUM FLOORING, in rolls, including ALL of the following:
  (a) roll width NOT greater than 2 m;
  (b) roll length NOT greater than 34 m;
  (c) roll thickness 2 mm OR 2.5 mm

TAPES, FASTENING SYSTEM, hook or loop, having a cut or uncut pile

TAPES, SELF ADHESIVE CLOTH

PLATE MOUNTING TAPE, rubber adhesive coated on BOTH sides, having
 ALL of the following:
   (a) WT of backing material g/m2 120 + or - 10;
   (b) adhesion to steel N/cm greater than 3, but NOT greater than 5;
   (c) WT of adhesive mass g/m2 238 + or - 18;
   (d) thickness of tape less liner um 390 + or - 24;
   (e) width of tape NOT less than 300 mm

TAPE, woven textile base coated with a semi-conductive rubber
 compound, capable of withstanding BOTH of the following processing
 properties:
   (a) pressure exceeding 1 722.5 kPa;
   (b) temperatures exceeding 200 degrees C

FABRIC, MARINE LIFE RAFT, AIR HOLDING, conforming to Department of
 Transport Standard M5/3/14/0446

FABRIC, polyethylene coated one side, reverse side coated with
 pressure sensitive adhesive

TAPE, vinyl coated cotton, coated on one side with adhesive, in
 rolls NOT less than 500 mm in width and NOT less than 300 metres in
 length

TAPE being natural or man made fibre fabric coated with a
 pressure sensitive adhesive, width not exceeding 80mm.

FABRIC, INKJET PRINTING CANVAS, polyester AND cotton, including 
BOTH of the following:
  (a) NOT greater than 80% polyester;
  (b) titanium oxide AND calcium carbonate coating

FABRIC, INKJET PRINTING CANVAS, 100% cotton, having titanium 
oxide AND calcium carbonate coating

FABRIC, acetate satin, including BOTH of the following:
  (a) acrylic based adhesive;
  (b) glassine paper liner

FABRICS,  ASPHALT REINFORCEMENT GRID-COMPOSITE, bituminous 
coated having NOT less than 60% bitumen, being EITHER of the 
following:
  (a) asphalt reinforcement grid-composite, being knitted high 
      modulus polyester yarns, having ALL of the following;
          (i) tensile strength NOT LESS than 50 kN/m in machine
              direction AND cross-machine direction;
         (ii) residual strength NOT less than 80% of the
              minimum tensile strength;
        (iii) maximum elongation NOT greater than 12% at breaking
              point;
         (iv) aperture size 40 mm x 40 mm;
          (v) non-woven polypropylene layer,
   (b) asphalt reinforcement grid-composite, being knitted high
       modulus polyvinyl-alcohol yarns, having ALL of the 
       following;
           (i) tensile strength NOT less than 50 kN/m in machine 
               direction AND cross-machine direction;
          (ii) residual strength NOT less than 80% of the 
               minimum tensile strength;
         (iii) maximum elongation NOT greater than 6% at breaking
               point;
          (iv) aperture size 40 mm x 40 mm;
           (v) polypropylene non-woven layer

FABRICS,  ASPHALT REINFORCEMENT GRID-COMPOSITE, bituminous 
coated having NOT less than 60% bitumen, being EITHER of the 
following:
  (a) asphalt reinforcement grid-composite, being knitted modulus
      polyester yarns, having ALL of the following;
          (i) tensile strength NOT LESS than 50 kN/m in machine
              direction AND cross-machine direction;
         (ii) residual strength NOT less than 80% of the
              minimum tensile strength;
        (iii) maximum elongation NOT greater than 12% at breaking
              point;
         (iv) aperture size 40 mm x 40 mm;
          (v) non-woven polypropylene layer,
   (b) asphalt reinforcement grid-composite, being knitted high
       modulus polyvinyl-alcohol yarns, having ALL of the 
       following;
           (i) tensile strength NOT less than 50 kN/m in machine 
               direction AND cross-machine direction;
          (ii) residual strength NOT less than 80% of the 
               minimum tensile strength;
         (iii) maximum elongation NOT greater than 6% at breaking
               point;
          (iv) aperture size 40 mm x 40 mm;
           (v) polypropylene non-woven layer

FABRIC, INKJET PRINTING CANVAS, polyester AND cotton, including 
BOTH of the following:
  (a) NOT greater than 65% polyester; 
  (b) titanium oxide AND calcium carbonate coating

FABRIC, pre-oxidised acrylic AND para-aramid, having a 
reflective aluminised film coating one side

STRAPPING TAPE, RIGID (non elastic), whether OR not in packs for
 retail sale

FABRIC, woven polyester, aluminium coated on one side, vacuum bonded

MANTLES, incandescent gas

WICKS, candle, having the characteristics detailed in the table
 below:
                           THE TABLE
                 threads            tex per            total tex
 plaits          per plait          thread             per wick
 3                 14                24                 1008
 3                 16                24                 1152
 3                 18                24                 1296
 3                 20                24                 1440
 3                 22                24                 1584
 3                 24                24                 1728
 3              {2 x 4               32                  416
                {1 x 5
 3                 4                 30                  360
 3                 4                 25                  300
 plus lead core wick, of various dimensions

LINERS, PIPE, including BOTH of the following:
  (a) polyester yarn OR polyethylene terephthalate circular 
      hose;
  (b) polyurethane OR polyethylene layer

HOSES, FIRE FIGHTING, textile

CONVEYOR BELTS, ROTARY BISCUIT MOULDERS, woven, having ALL of the
 following:
   (a) endless (seamless);
   (b) one ply;
   (c) 100% cotton warp yarn and 100% flax weft yarn, but NOT
       including those with a PVC inner layer;
   (d) impregnated one side with polyurethane OR polyvinyl chloride;
   (e) woven selvedges;
   (f) width within the range of 500 mm to 1 300 mm;
   (g) endless length within the range of 1 900 mm to 7 000 mm;
   (h) thickness within the range of 1.8 mm to 2.4 mm

BELTS, ELASTIC, CONVEYOR, manufactured from ALL of the following
 fibres:
   (a) polyurethane;
   (b) polyamide;
   (c) spandex

BELTING, CONVEYOR, having ALL of the following:
  (a) three ply polyester fabric tension layer;
  (b) polyvinyl chloride top surface;
  (c) weight NOT less than 3.6 kg/m2 and NOT greater than 
      5.9 kg/m2;
  (d) thickness NOT less than 3.2 mm and NOT greater than 
      5.1 mm;
  (e) width NOT greater than 3 000 mm

BELTING, CONVEYOR, having ALL of the following:
   (a) three ply polyester fabric tension layer;
   (b) polyvinyl chloride top coating;
   (c) weight NOT less than 7 kg/m2 and NOT greater than 8 kg/m2;
   (d) belt thickness NOT less than 6 mm and NOT greater than 
       7.4 mm;
   (e) width NOT greater than 2 000 mm

BELTING OR TAPES, CARRIER, anti-static, woven polyester,
 maximum thickness 2.1 mm

BLANKETS, printers", in the length but NOT cut to size, and NOT
 including engravers" or stereo blankets

FABRICS, FILTER, non woven polyester, having a laminated 
aluminium coating

BOLTING CLOTH, monofilament, of silk or man-made fibres,
 geometrically accurate as to mesh and micron size

TEXTILE FABRICS, PAPER MAKING MACHINE, endless OR seam jointed, 
being ANY of the following:
  (a) synthetic forming fabrics;
  (b) multiple layer press fabrics and/or belts;
  (c) synthetic dryer fabrics

FABRIC, PAPER MAKING, forming

TEXTILE FABRICS, PAPER MAKING MACHINE, endless OR seam jointed, 
being ANY of the following:
  (a) synthetic forming fabrics;
  (b) multiple layer press fabrics and/or belts;
  (c) synthetic dryer fabrics

FABRIC OR FELTS, PAPER MAKING, being ANY of the following:
  (a) forming fabric;
  (b) drying fabric;
  (c) pressing felt

BASE FABRIC, WET OR PRESSED FELT, papermaking, un-needled

GASKETS, man-made fibre, tubular felt

CLEANERS, discette head, lint free

PADS, polishing, ophthalmic lens

BAGS, LEAD ACID BATTERY TUBULAR PLATE, multiple tube, impregnated
 with resin

TEXTILE SLEEVES, NOT heat set, manufactured from polymer
 monofilament

FASTENERS, hook and loop, cut to a circular or rectangular shape,
 being a knitted fabric with a tufted pile, whether or not coated
 with adhesive on one side

FELT PIECES, pressed, not of needle felt, with density over
 0.04 g/cu cm, and containing not less than 85% wool fibre being any
 of the following shapes:
   (a) cones;
   (b) discs;
   (c) bobs;
   (d) fingers

SLEEVES OF FELT, endless for conveyor rollers being belts or bands

WOVEN CLOTH, polypropylene AND/OR polyester AND/OR nylon, 
filtration, in rolls, having ANY of the following:
  (a) monofilament AND/OR multifilament AND/OR staple yarns; 
  (b) twill AND/OR satin AND/OR plain weave patterns; 
  (c) heat set AND/OR calendered AND/OR singed finish;
  (d) width NOT greater than 3800 mm

DUST BAGS, VACUUM CLEANER, disposable, non-woven polypropylene, 
having a plastic connector AND closure tab

FILTERS, AIR, AUTOMOTIVE CABIN, particulate

FILTER BAGS, BAGHOUSE, having an expanded 
polytetrafluoroethylene micro-porous membrane

BELTING, MAN-MADE FABRIC, having ALL of the following:
  (a) weight NOT less than 650 g/m2;
  (b) thickness NOT less than 0.85 mm

PARTS, FILTER PRESS, being woven textile articles having ALL of 
the following:
  (a) hook and loop taped edges;
  (b) circular holes with attached rubber gaskets;
  (c) locating holes

FABRIC, BELTING, man made, having ALL of the following:
  (a) stainless steel seams;
  (b) weight NOT less than 650 grams per square metre;
  (c) thickness NOT less than 0.85 mm

BONNETS OR PADS, CARPET SCRUBBING, circular, pile fabric

DUSTBAGS, VACUUM CLEANER, disposable, incorporating a microfibre
 filter

FILTER BAGS, MULTI-CHANNEL, comprising ALL of the following:
   (a) top cuff polyester woven fabric weighing NOT less than
       400 g/m2;
   (b) pocket body polyester needlefelt weighing NOT less than
       440 g/m2;
   (c) re-enforced part on bottom polyester needlefelt weighing NOT
       less than 650 g/m2

PRESSURE SEGMENT BELTS, with OR without felt cross-strips

FILTER FABRIC BELTS, polyester, having ALL of the following: 
  (a) weft NOT less than 0.5 mm and NOT greater than 0.6 mm;
  (b) warp NOT less than 0.3 mm and NOT greater than 0.4 mm;
  (c) weight NOT less than 780 g/m2 and NOT greater than
      790 g/m2; 
  (d) belt thickness NOT less than 1.0 mm and NOT greater than
      1.50 mm

ROLLER PADS, IRONER, LAUNDRY CALENDER MACHINE, textile, hemmed 
AND corded, having a length NOT less than 760 cm and NOT greater 
than 825.5 cm

ROLLER PADS, IRONER, LAUNDRY CALENDER MACHINE, textile, hemmed 
AND corded, having a length NOT less than 760 cm and NOT greater 
than 825 cm

MATS, FILTER, SPRAY PAINTING BOOTH