Tariff Concession Orders

PAPER, printing, commonly known as "Bible Paper", white only, in
 reels, being uncoated wood free paper manufactured from 100%
 bleached pulp, having ALL of the following:
   (a) grammage 30 g/sq m or greater but NOT exceeding 35 g/sq m;
   (b) printing opacity exceeding 76% (Hunterlab Test);
   (c) whiteness (colour) factor exceeding 86% (Hunterlab Test)

PAPER, PRINTING, bleached, white OR tinted, in rolls, having ALL 
of the following:
  (a) width NOT less than 210 mm and NOT greater than 2 060 mm;
  (b) weight NOT less than 60 gsm and NOT greater than 120 gsm;
  (c) whiteness NOT greater than CIE 145

PAPER, uncoated, in rolls NOT less than 15 cm in width, having 
BOTH of the following:
  (a) weight NOT less than 40 gsm and NOT greater than 150 gsm;
  (b) whiteness NOT less than CIE 146 and NOT greater than CIE 
170

PAPER, PRINTING, uncoated, in rolls, having ALL of the following:
  (a) roll width NOT less than 340 mm and NOT greater than 
      1 020 mm;   
  (b) weight NOT less than 35 gsm and NOT greater than 60 gsm;
  (c) opacity NOT less than 82% and NOT greater than 91%;
  (d) whiteness NOT less than CIE 115 and NOT greater than 
      CIE 130

PAPER, uncoated, having ALL of the following:
  (a) cut to rectangular A4 size sheets 210 mm X 297 mm;
  (b) weight NOT less than 40 gsm and NOT greater than 80 gsm;
  (c) whiteness NOT less than CIE 142 and NOT greater than CIE 
175

PAPER, uncoated, having ALL of the following:
  (a) cut to rectangular A4 size sheets 210 mm X 297 mm;
  (b) weight NOT less than 70 gsm and NOT greater than 100 gsm;
  (c) whiteness NOT less than CIE 155 and NOT greater than
      CIE 167

PAPER, TINTED, uncoated, having BOTH of the following:
  (a) A4 size sheets 210 mm X 297 mm;
  (b) weight NOT less than 80 gsm and NOT greater than 120 gsm

PAPER, uncoated, having ALL of the following:
  (a) cut to rectangular A4 size sheets 210 mm X 297 mm;
  (b) weight NOT less than 80 gsm and NOT greater than 150 gsm;
  (c) whiteness NOT less than CIE 146 and NOT greater than CIE 
170

PAPER, bleached, having ALL of the following:
  (a) cut to rectangular A3 size sheets 297 mm X 420 mm;
  (b) weight NOT less than 40 gsm and NOT greater than 150 gsm;
  (c) whiteness NOT less than CIE 145 and NOT greater than CIE 
167

PAPER, TINTED, uncoated, having BOTH of the following:
  (a) A3 size sheets 297 mm X 420 mm;
  (b) weight NOT less than 75 gsm and NOT greater than 90 gsm

PAPER, uncoated, having ALL of the following:
  (a) sheet size 297 mm X 420 mm;  
  (b) weight NOT less than 40 gsm and NOT greater than 150 gsm;
  (c) whiteness NOT less than CIE 146 and NOT greater than CIE 
170

PAPER, sheets, bleached, white OR tinted, having ALL of the 
following:
  (a) sheets NOT less than 320 mm X 450 mm and NOT greater than
      805 mm X 1 155 mm;
  (b) weight NOT less than 40 gsm and NOT greater than 150 gsm;
  (c) whiteness NOT greater than CIE 145

PAPER, sheet, bleached, white OR tinted, having ALL of the 
following:
  (a) sheet size NOT less than 240 mm X 317 mm and NOT greater
       than 890 mm X 1 200 mm;
  (b) weight NOT less than 40 gsm and NOT greater than 150 gsm;
  (c) whiteness NOT greater than CIE 170

WATERMARK PAPER, bleached wood pulp, having BOTH of the 
following:
  (a) weight NOT less than 90 g/m2 and NOT greater 
      than 150 g/m2;
  (b) chemically sensitised alteration detection additives

PAPER, woodfree, uncoated, exceeding 125 gsm and NOT exceeding 
150 gsm

PAPER, woodfree, uncoated, exceeding 150 gsm and NOT exceeding 
205 gsm

PAPER, woodfree, uncoated, exceeding 150 gsm and NOT exceeding 
205 gsm

PAPER, woodfree, uncoated, exceeding 205 gsm

PAPER, woodfree, uncoated, exceeding 205 gsm

CARTRIDGES, ARTISTS", having ALL of the following:
   (a) cotton fibre content of NOT less than 25%;
   (b) gelatine sized;
   (c) deckle edged

PAPER, having the following characteristics:
   (a) having a water absorbency, when tested by the one minute Cobb
       method, of not less than 45 gsm;
   (b) containing not less than 70% of mechanical wood pulp; and,
   (c) weighing between 30 gsm and 39 gsm (both inclusive).

ABSORBENT PAPER, in rolls, having a sheet width NOT less than 
360 mm

TABLE NAPKIN STOCK, airlaid, in rolls, having a width NOT less 
than 360 mm

TISSUE STOCK, bleached high wet strength (not creped, embossed or
 perforated), in roll form, NOT exceeding 34 gsm, caliper thickness
 4.2 micron

TOWELLING, WET CREPE, single ply, NOT greater than 47 gsm

TABLE NAPKIN STOCK, in rolls, having a width NOT less than 475 
mm and NOT greater than 1 200 mm

TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in 
rolls, having a width NOT less than 360 mm and NOT greater than 
400 mm

TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in 
rolls having a width NOT less than 400 mm and NOT greater than 
475 mm

AIRLAID ABSORBENT PAPER, SANITARY, in rolls

LINEN, TABLE, wood cellulose and ethylene vinylacetate 
copolymer, being EITHER of the following:
  (a) in rolls having a width exceeding 36 cm;
  (b) in sheets with one side exceeding 36 cm and the other
      side exceeding 15 cm in the unfolded state

TOWELLING, WET CREPE, single ply, NOT greater than 40 gsm

PAPERBOARD, KRAFT LINER, uncoated, unbleached, having BOTH of the
 following:
   (a) thickness of NOT less than 0.94 mm;
   (b) weight of NOT less than 629 g/sq m

KRAFT PAPER, bleached AND coated, having ALL of the following:
  (a) roll width NOT less than 36 cm; 
  (b) weight NOT less than 115 gsm and NOT greater than 120 gsm;
  (c) machine finished

PAPER AND/OR PAPERBOARD, KRAFTLINER, top layer bleached, having 
ALL of the following:
  (a) whiteness NOT less than 93.0% complying with International
      Organization for Standardization ISO 11475:2004(E);
  (b) burst strength NOT less than 555 kPa complying with
      International Organization for Standardization 
      ISO 2758:2001(E);
  (c) NOT less than 90% virgin kraft fibre;
  (d) weighing NOT more than 205 g/m2

SACK KRAFT PAPER, tensile energy absorption, uncoated AND 
unbleached, in rolls, width NOT less than 650 mm having ALL of 
the following:
  (a) Cobb value NOT greater than 22 g/m;
  (b) cross direction stretch at break NOT  less than 7%;
  (c) machine direction stretch at break NOT less than 5.5%;
  (d) porosity Gurley value  NOT less than 24s;
  (e) wet tensile strength retention machine direction values
      NOT less than 20%

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT less than 36 cm;
  (b) weight NOT less than 60 gsm and NOT greater than 115 gsm;
  (c) machine glazed OR machine finished

SACK KRAFT PAPER, bleached, having ALL of the following:
  (a) weight NOT less than 70 gsm and NOT greater than 100 gsm;
  (b) cross direction stretch at break NOT less than 7.8%;
  (c) machine direction stretch at break NOT less than 2.6%

KRAFT PAPER, SACK, bleached, having BOTH of the following:
  (a) weight NOT less than 70 gsm and NOT greater than 90 gsm;
  (b) stretch at break NOT less than 5.8% in cross direction 
      AND in machine direction

KRAFT PAPER, brown, uncoated AND unbleached, having ALL of the 
following:
  (a) roll width NOT greater than 1 385 mm;
  (b) weight NOT less than 32 gsm and NOT greater than 60 gsm;
  (c) gloss factor NOT less than 30 %;
  (d) machine glazed

KRAFT PAPER, unbleached AND uncoated, having ALL of the 
following: 
  (a) roll width NOT less than 250 mm and NOT greater than 
      2 850 mm; 
  (b) weight NOT less than 30 gsm and NOT greater than 50 gsm; 
  (c) machine glazed OR machine finished

SATURATING KRAFT PAPER, brown, unbleached, machine finished, in 
rolls, having ALL of the following:
  (a) klemm absorption NOT less than 10 mm after 2 min;  
  (b) grammage NOT less than 96 g/m2 and NOT greater than 
      104 g/m2;
  (c) ash content NOT less than 0.2% and NOT greater than 2%;
  (d) hot extract having NOT less than 6 pH and NOT greater 
      than 8 pH; 
  (e) air resistance NOT greater than 4 s;
  (f) roll width NOT less than 1 050 mm;
  (g) roll weight NOT greater than 450 kg each;
  (h) core inside diameter NOT less than 75 mm;
  (i) core outside diameter NOT less than 1 000mm;
  (j) wet strength NOT less than 1 kN/m and NOT greater than 
      1.3 kN/m

TAPE, PLASTERBOARD JOINT, width NOT less than 50 cm

KRAFT PAPER, food grade, in rolls, NOT less than 60 gsm
and NOT greater than 150 gsm

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT less than 25 cm and NOT greater than 
      2 850 mm;
  (b) weight NOT less than 28 gsm and NOT greater than 115 gsm;
  (c) machine glazed OR machine finished

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT less than 36 cm; 
  (b) weight NOT less than 35 gsm and NOT greater than 60 gsm;
  (c) machine glazed

KRAFT PAPER, uncoated, bleached, in rolls, having ALL of the 
following:
  (a) weight NOT less than 28 g/m2 and NOT greater than 50 g/m2;
  (b) width NOT less than 15 cm;
  (c) brightness NOT greater than 87%

KRAFT PAPER, machine glazed, having ANY three or more of the 
following:
  (a) weight NOT less than 22 gsm and NOT greater than 80 gsm;
  (b) gloss factor NOT less than 26%;
  (c) white brightness factor NOT less than 82%;
  (d) thickness NOT greater than 95 micron;
  (e) machine direction (MD) tensile strength NOT less than 
      1.7 kN/m;
  (f) opacity NOT less than 48%; 
  (g) burst strength NOT less than 60 kPa

KRAFT PAPER, food grade, in rolls, having ALL of the following:
  (a) gsm NOT less than 60 and NOT greater than 120;
  (b) core NOT greater than 76 mm;
  (c) width NOT greater than 620 mm;
  (d) roll lengths NOT greater than 11 600 metres

SATURATING BASE PAPER, white OR artificially coloured, phenolic 
OR melamine based resin saturable

KRAFT PAPER, SOLID BLEACHED SULPHATE, thermoformed OR press 
formed, having ALL of the following:
  (a) weight NOT less than 120 gsm and NOT greater than 150 gsm;
  (b) stretchability NOT less than 9% in cross direction AND NOT
      greater than 13% in machine direction;
  (c) porosity Gurley value NOT greater than 126 s

ELECTRICAL INSULATING PAPER, uncoated, conforming to International
 Standard IEC 554 or IEC 641

PAPER, PRESSPAPER AND PRESSBOARD, ELECTRICAL INSULATING, conforming
 to EITHER International Standard IEC 641 OR IEC 763

PAPERBOARD, bleached, in rolls, complying with ALL provisions of 
the USA Federal Food and Cosmetic Act, Food and Drugs Additives 
Section 176.170

PAPERBOARD, WHITE TOP LINER, uncoated, multiply, in rolls, 
having ALL of the following:
  (a) bleached pulp top ply;
  (b) grammage NOT greater than 150 g/m2;
  (c) dirt count NOT greater than 50 ppm;
  (d) brightness NOT less than 70% measured in accordance with
      International Organization for Standardization 
      ISO 2470-2:2008;
  (e) Bendtsen roughness NOT exceeding than 1 000 mL/min 
      measured in accordance with Australian/New Zealand
      Standard AS/NZS 1301.439s:2007

WHITE TOP LINER BOARD, uncoated, multi-ply, in rolls, having ALL 
of the following:
  (a) bleached pulp top ply;
  (b) grammage NOT less than 150 g/m2 and NOT greater than
      205 g/m2;
  (c) roughness NOT exceeding 1 000 ml/min;
  (d) dirt count NOT exceeding 50 ppm;
  (e) brightness NOT less than 70%

TEA BAG MATERIAL, made from bonded fibre manilla hemp and/or
 cellulosic or synthetic fibres, complying with FDA requirements,
 treated with a wet strength resin, having a grammage of 10 g/sq m
 or greater but NOT exceeding 40 g/sq m

TISSUE PAPER, wet strength, acid free, sheet form, grammage
 14 g/sq m or greater but NOT exceeding 18 g/sq m

SATURATING BASE PAPER, white or artificially coloured

PAPERBOARD, multi-ply, uncoated, having ALL the following:
  (a) weight NOT less than 300 gsm and NOT greater than 430 gsm;
  (b) outer layers having bleached chemical pulp; 
  (c) internal layer having groundwood pulp;
  (d) absorbency rating NOT greater than 30 seconds/ml

PAPERBOARD, bleached, having ALL of the following:
  (a) in sheets OR on reels;
  (b) two OR more layers;
  (c) weight NOT less than 225 grams per square metre

PAPERBOARD, in sheets OR reels, having a grammage NOT less than 
225 grams per square metre

PAPERBOARD, in sheets, having a weight NOT less than 225 g/m2

CARBONLESS MULTIPLY PAPER

PAPER, SELF COPY, carbonless

FILM, paper based, in sheet form, capable of accepting wax crayon
 hand drawings or computer initiated imagery as transfers for the
 purpose of application to fabrics by a heat press process

TRANSFER PAPER, dry transfer printing, heat and pressure process

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) calcium carbonate buffered;
  (b) weight NOT less than 210 grams per square metre;
  (c) coated surface

PAPER, woodfree, white, having ALL of the following:
  (a) pigment OR calcium carbonate coated on one side;
  (b) grammage NOT less than 30 grams per square metre and NOT 
      greater than 150 grams per square metre;
  (c) width NOT less than 15 cm;
  (d) Cobb value NOT less than 16 grams per square metre and NOT
      greater than 33 grams per square metre tested in accordance
      with International Standard (ISO) 535:2014(E);
  (e) machine directional tensile strength NOT less than 28 N per
      square millimetre tested in accordance with European
      Standard EN ISO 1924-2:2009;
  (f) cross directional tensile strength NOT less than 14 N per
      square millimetre tested in accordance with European
      Standard EN ISO 1924-2:2009

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) pH value NOT less than 7.5 and NOT greater than 9.5;
  (b) calcium carbonate buffered;
  (c) weight NOT less than 188 grams per square metre;
  (d) coated surface

PAPER, clay coated one side, having ALL of the following:
  (a) weight NOT less than 41 g/sq m and NOT greater than
      47 g/sq m;
  (b) brightness NOT less than 82%;
  (c) opacity NOT less than 65%;
  (d) moisture content NOT greater than 5%;
  (e) Cobb valve NOT greater than 26 g/sq m;
  (f) machine direction stretch NOT less than 1.5%;
  (g) cross direction stretch NOT less than 1.7%

PAPER, white, glossy, clay coated one side, having ALL 
of the following:
  (a) weight NOT less than 85 g/sq m and NOT greater than 
      110 g/sq m;
  (b) brightness NOT less than 80%;
  (c) opacity NOT less than 80%;
  (d) moisture content NOT greater than 5%;
  (e) Cobb valve NOT greater than 33 g/sq m;
  (f) machine direction tensile stretch NOT less than 0.9%;
  (g) cross direction tensile stretch NOT less than 3.5%

PAPER AND PAPERBOARD, coated with kaolin (china clay) or other 
inorganic substances, in rolls exceeding 15 cm in width, being 
EITHER of the following:
(a)coated both sides with equal coating;
(b)having ALL of the following:
  (i) fibre content 100% virgin fibre;
 (ii) minimum International Standard (ISO) 2470-1 brightness of 
      87%;
(iii) maximum PPS (Parker Print Surf) International Standard 
      (ISO) 8791-4 roughness of 1.3 micrometers (microns) on the 
      smoother side

INKJET PAPER, in rolls, having BOTH of the following:
  (a) calcium carbonate coated on one side AND clay coated on 
      the reverse side;
  (b) paper width exceeding 15 cm

LABEL BASE PAPER, pigment coated one side, in rolls

PAPER, POSTER, MACHINE GLAZED, china clay coated one side, in 
rolls

PAPER, clay coated one side, having ALL the following:
   (a) weight between 43 g/sq m and 47 g/sq m;
   (b) smoothness (Bekk) NOT less than 3000 seconds;
   (c) brightness NOT less than 82%;
   (d) opacity NOT less than 72%;
   (e) moisture NOT exceeding 5%;
   (f) cobb not exceeding 26 g/sq m;
   (g) stretch (machine direction) NOT less than 1.5%;
   (h) stretch (cross direction) NOT less than 3.8%

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) calcium carbonate buffered;
  (b) weight NOT less than 210 grams per square metre;
  (c) coated surface

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) pH value NOT less than 7.5 and NOT greater than 9.5;
  (b) calcium carbonate buffered;
  (c) weight NOT less than 188 grams per square metre;
  (d) coated surface

INKJET PAPER, having BOTH of the following:
  (a) calcium carbonate coated on one side AND clay coated on 
      the reverse side;
  (b) paper width AND length NOT greater than 36 cm

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) calcium carbonate buffered;
  (b) weight NOT less than 210 grams per square metre;
  (c) coated surface

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) pH value NOT less than 7.5 and NOT greater than 9.5;
  (b) calcium carbonate buffered;
  (c) weight NOT less than 188 grams per square metre;
  (d) coated surface

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) calcium carbonate buffered;
  (b) weight NOT less than 210 grams per square metre;
  (c) coated surface

PAPER, INKJET, cellulose AND/OR cotton AND/OR plant fibre, 
having ALL of the following:
  (a) pH value NOT less than 7.5 and NOT greater than 9.5;
  (b) calcium carbonate buffered;
  (c) weight NOT less than 188 grams per square metre;
  (d) coated surface

PAPER AND PAPERBOARD, coated with kaolin (China Clay) OR other 
inorganic substances, coated both sides with equal coating, in 
sheets

PAPER AND PAPERBOARD, coated with kaolin (china clay) OR other
inorganic substances, having a width NOT less than 15 cm and a 
length NOT less than 36 cm, being EITHER of the following:
  (a) coated both sides with equal coating;
  (b) having ALL the following:
        (i) virgin fibre;
       (ii) brightness NOT less than 87% AND complying with 
            International Organisation for Standardization 
            ISO 2470-1;
      (iii) maximum roughness of 1.3 microns AND complying 
            with International Organisation for Standardization 
            ISO 8791-4, print-surf method

PAPER AND PAPERBOARD, coated with kaolin (china clay) or other 
inorganic substances, in sheets, in the unfolded state, with 
both sides exceeding 36 cm, being EITHER of the following:
(a) coated both sides with equal coating;
(b) having ALL of the following:
   (i) fibre content 100% virgin fibre;
  (ii) minimum International Standard (ISO) 2470-1 brightness 
       of 87%;
 (iii) maximum PPS (Parker Print Surf) International Standard 
      (ISO) 8791-4 roughness of 1.3 micrometers (microns)

PAPER AND PAPERBOARD, coated with kaolin (china clay) OR other 
inorganic substances on one OR both sides, having BOTH of the 
following:
  (a) in sheets in the unfolded state of which one side has a 
      length NOT greater than 36 cm;
  (b) weight NOT greater than 180 gsm

LABEL BASE PAPER, pigment coated one side, in sheets

PAPER, LABEL BASE, high white gloss, inorganic pigment coated 
one side, having a weight NOT less than 75  g/sqm and NOT 
greater than 105  g/gsm

WET STRENGTH LABEL BASE PAPER, pigment coated one side, in sheet
 form

BOARDS, playing card, being a laminated coated board consisting
 of two outer layers of laminated coated stock with an inner
 liner of black, blue or grey material giving a complete opacity
 to the final substrate, in sheets having a thickness of 250 microns
 or greater but NOT exceeding 295 microns

PAPER AND PAPERBOARD, coated with kaolin (china clay) OR other 
inorganic substances on one OR both sides, being EITHER of the 
following:
  (a)  in sheets, in the unfolded state, with BOTH sides
       exceeding 36 cm;
  (b)  in rolls exceeding 15 cm in width

SHEETS,AND/OR REELS, PAPER AND/OR PAPERBOARD, kaolin (china 
clay) AND/OR calcium carbonate coated on one OR both sides, 
having a weight of NOT less than 90 gsm, with OR without ANY of 
the following:
  (a) binder;
  (b) coloured surface;
  (c) printed surface

PAPER, coated with kaolin (china clay) OR other inorganic 
substances on both sides, having a weight NOT exceeding 85 gsm, 
being EITHER of the following:
  (a) in sheets with BOTH sides exceeding 36 cm, in the
      unfolded state;
  (b) in rolls exceeding 15 cm in width

PAPER AND PAPERBOARD, coated with kaolin (china clay) or other 
inorganic substances, in sheets, in the unfolded state, with 
both sides exceeding 36 cm or in rolls exceeding 15 cm in width, 
being EITHER of the following:
(a)coated both sides with equal coating;
(b)having ALL of the following:  
        (i) fibre content 100% virgin fibre;
        ii) minimum International Standard (ISO) 2470-
            brightness of 87%;
      (iii) maximum PPS (Parker Print Surf) International     
            Standard (ISO) 8791-4 roughness of 1.3 micrometers 
            (microns)

PAPER AND PAPERBOARD, coated with kaolin (china clay) or other 
inorganic substances, having a width exceeding 15 cm and a 
length exceeding 36 cm, being EITHER of the following:
  (a) coated both sides with equal coating;
  (b) having ALL the following:
       (i) fibre content 100% virgin fibre;
      (ii) minimum International Standard (ISO) 2470-1 brightness
           of 87%;
     (iii) maximum PPS (Parker Print Surf) International
           Standard (ISO) 8791-4 roughness of 1.3 micrometers
           (microns)

PAPER AND PAPERBOARD, coated with kaolin (china clay) OR other 
inorganic substances on one OR both sides, having BOTH of the 
following:
  (a) in sheets in the unfolded state of which one side has a 
      length NOT greater than 36 cm;
  (b) weight NOT greater than 180 gsm

SHEETS AND/OR ROLLS, PAPERBOARD, multi-ply, kaolin (china clay) 
AND/OR calcium carbonate coated on one OR both sides, with OR 
without ANY of the following:
  (a) binder;
  (b) coloured surfaces;
  (c) printed surfaces

SHEETS AND/OR REELS, PAPER AND/OR PAPERBOARD, kaolin (china 
clay) AND/OR calcium carbonate coated on one OR both sides, with 
OR without ANY of the following:
  (a) binder;
  (b) coloured surfaces;
  (c) printed surfaces

LINT REMOVERS, consisting of a roll of adhesive paper tape, mounted
 on a revolving plastic handle

TAPES, LABELLING, adhesive, with OR without thermal transfer ribbon

MASKING TAPE, crepe paper, self adhesive

FLATSTOCK TISSUE PAPER, coated on both sides with pressure
 sensitive rubber adhesive, with interliner, thickness of 0.10 mm or
 greater but NOT exceeding 0.30 mm

ACRYLIC ADHESIVE, double coated non-woven tissue having ALL of the
 following:
   (a) total thickness NOT exceeding 110 microns;
   (b) tensile strength NOT exceeding 28N/25 mm;
   (c) 180 degrees peel adhesion in excess of 16N/25 mm;
   (d) capable of being applied at temperatures as low as -17 degrees
       C;
   (e) positive adhesion to paper with a high moisture content

TAPE, splicing, repulpable

PAPER, ADHESIVE, in rolls, having ALL of the 
following:              
  (a) width NOT less than 500 mm and NOT greater than 1 500 mm;  
  (b) thickness NOT less than 83 microns and NOT greater than 
135 microns; 
  (c) rubber based adhesive

LABEL PAPER, in rolls, having BOTH of the following:
  (a) water based acrylic adhesive;
  (b) kraft siliconised liner

LABEL PAPER, in rolls, having ALL of the following:
  (a) facestock base weight NOT less than 71 gsm and NOT greater
      than 89 gsm;
  (b) rubber based adhesive;
  (c) glassine liner

TRANSFER TAPE, adhesive covered, having BOTH of the following:
  (a) coated on one side with silicone;
  (b) supported by supercalendered kraft paper coated on one
      side with silicone

PAPER, LABEL, in rolls, multi-layered, including ALL of the 
following:
  (a) width NOT less than 1 400 mm and NOT greater than 1 650 mm;
  (b) paper facestock with extruded film underlaminate;
  (c) liner, being EITHER of the following:
         (i) super calendered glassine paper liner, having a 
             basis weight NOT less than 50 gsm; 
        (ii) polyethylene terephthalate liner, having a    
             basis weight NOT less than 35 gsm,
  (d) acrylic based emulsion adhesive

PAPER, LABEL, in rolls, multi-layered, including ALL of the 
following:
  (a) width NOT less than 1 400 mm and NOT greater than 1 650 mm;
  (b) one-side cast coated paper facestock, having optical 
      brightening agents;
  (c) super calendered glassine paper liner, having a basis 
      weight NOT less than 50 gsm;
  (d) acrylic based emulsion adhesive

PAPER, ADHESIVE, on reels, having BOTH of the following:
  (a) width NOT less than 250 mm and NOT greater than 1 650 mm;
  (b) rubber OR water based adhesive layer

PAPER, in rolls, having an adhesive layer with a glassine OR 
polyester layer

PAPER, LABEL, in rolls, multi-layered, including ALL of the 
following:
  (a) width NOT less than 1 400 mm and NOT greater than 1 600 mm;
  (b) paper face stock having a base weight NOT less than 99 gsm 
      and NOT greater than 132 gsm;
  (c) clear polyethylene terephthalate (PET) release liner 
      having a basis weight NOT less than 37 g/m2 and NOT
      greater than 47 g/m2;
  (d) rubber based adhesive

PAPER, on reels, having BOTH of the following:
  (a) weight NOT less than 70 gsm and NOT greater than 80 gsm;
  (b) water based repositionable pressure sensitive adhesive 
      layer

PAPER, LABEL, including BOTH of the following:
  (a) acrylic adhesive backing inner layer;
  (b) synthetic lined AND silicone coated outer layers

TAPE, fibrous, printable, latex rubber, self adhesive, paper
 backed

PAPER, THERMAL IMAGING, self-adhesive

MASKING TAPE, crepe paper, self adhesive

PAPER, transfer adhesive covered, coated on one side with silicone,
 supported by supercalendered kraft paper coated on one side with
 silicone, capable of withstanding temperatures in the range of
 - 4.11 C. (inclusive) to 79.11 C. (inclusive)

TAPE, paper, wet OR dry sign application, NOT being masking tape OR
 tape having a release liner, in rolls having 1200 mm width OR
 greater, but NOT including paper tape having ANY of the following:
   (a) thickness of 0.17 mm OR greater;
   (b) tensile strength of 90 N/25 mm OR greater;
   (c) tack level (adhesion to steel) of 9 N/25 mm OR greater
 These are values when tested according to methods described in
 AS1635 and meeting the requirements of AS2060

TAPE, fibrous, printable, latex rubber, self adhesive, paper
 backed

FLEECE PAPER, having a width greater than 15 cm

PRESSPAPER, ELECTRICAL INSULATING, printed AND/OR coated on a
 base paper conforming to EITHER International Standard IEC 554 OR
 IEC 641

STAMP PAPER, clay coated, wood free, adhesive backed, having ALL
 of the following:
   (a) paper substance, before adhesive added, NOT less than
       85 g/sq m;
   (b) adhesive spread NOT less than 14 g/sq m;
   (c) tensile strength NOT less than 44.5 mN in machine
       direction;
   (d) tensile strength NOT less than 26.7 mN in cross direction;
   (e) burst strength NOT less than 172 kPa;
   (f) final paper coating to contain phosphorescent material
       which emits light within the range 580 nm to 640 nm (both
       inclusive), with peak emission at 580 nm when irradiated
       by a 365 nm ultraviolet source;
   (g) final paper coating to exhibit a minimum phosphorescent
       emission equal to that emitted by a coating containing
       0.39 g/sq m of a fluorescent dyestuff

PAPERBOARD, FOOD AND/OR BEVERAGE, bleached, on reels, having 
BOTH of the following:
  (a) coated on one side with polylactic acid and polybutylene
      adipate terephthalate blend;
  (b) weight NOT less than 230 gsm and NOT greater than 450 gsm

PAPERBOARD, bleached, having ALL of the following:
  (a) bleached chemical pulp outer layers;
  (b) bleached chemi-thermomechanical pulp inner layer;
  (c) polyethylene coating on both sides

BOARDS, DIGITAL INKJET AND SCREEN PRINTING, multi-layered, 
having ALL of the following:
  (a) polyurethane foam core;
  (b) polyethylene layers covering both sides;
  (c) primer finishing outer layer;
  (d) thickness NOT less than 5 mm and NOT greater than 21 mm;
  (e) bleached paper layer having a weight NOT less than 270 gsm

PAPERBOARD, bleached, coated on one side with polyethylene 
terephalate (PET)

PAPERBOARD, CUP STOCK, coated on both sides with polyethylene

INKJET PAPER, in sheets, polymer resin coated

PAPER, INKJET, polymer resin coated, in rolls

PAPERBOARD, kraft, bleached, in rolls, having ALL of the 
following :
 (a) polyethylene coating on one side with a weight NOT greater 
than 18 g/sq m;
 (b) polyethylene coating on the other side with a weight NOT 
greater than 20 g/sq m;
 (c) total weight NOT less than 280 g/sq m;
 (d) width NOT less than 15 cm;
 (e) unprinted

PAPERBOARD, KRAFT, bleached, in rolls, having ALL of the 
following:
   (a) a polyethylene coating on one side with a weight NOT 
greater than 18 g/sq m;
   (b) a polyethylene coating on the other side with a weight 
NOT greater than 20 g/sq m;
   (c) a total weight NOT less than 215 g/sq m:
   (d) a width NOT less than 15 cm;
   (e) unprinted

PAPERBOARD, KRAFT, bleached, rolls AND/OR sheets, having ALL of 
the following:
  (a) polyethylene coating on one side only with a weight of 
     NOT less than 15g/sq m;
  (b) total weight NOT less than 205 g/sq m;
  (c) width NOT less than 15cm;
  (d) unprinted

PAPERBOARD, cup stock, having ALL of the following:
  (a) polyethylene coating NOT exceeding 25 g/sm;
  (b) unprinted;
  (c) total weight including coating, NOT exceeding 360 g/sm

BASE PAPER, RESIN COATED, PHOTOGRAPHIC

PAPERBOARD, bleached, in rolls, having ALL of the following:
   (a) polyester coating on one side with a weight NOT greater than
       48 gsm;
   (b) total weight 320 to 510 gsm (inclusive);
   (c) caliper 0.420 mm to 0.660 mm (inclusive);
   (d) GE brightness level NOT less than 82%;
   (e) stiffness: machine direction (MD) greater than 160, cross
       direction (CD) greater than 65 using the Taber V-5 test method

FOOD PACKAGING INSERTS, cardboard, laminated with metallised 
polyethylene terephthalate (PET)

PAPERBOARD, BLEACHED, sheets, being laminated AND/OR coated 
with ALL of the following:
  (a) kraft paper;
  (b) clear polyolefin;
  (c) aluminium foil;
  (d) coloured polyolefin;
  (e) polyester film

PAPER, acrylic AND/OR vinyl ester AND/OR epoxy resin 
impregnated, coloured AND/OR printed, in rolls, having BOTH of 
the following:
  (a) base paper weight NOT greater than 300 g/m2;   
  (b) width NOT less than 400 mm

CELLULOSE PAPER, phenolic resin OR melamine impregnated

DUCT SPACING PAPER, TRANSFORMER, corrugated, in rolls, having 
one OR both sides coated with an epoxy-phenolic resin

KRAFT PAPER, having BOTH of the following:
  (a) low density polyethylene (LDPE) film layer;
  (b) weight NOT less than 80 gsm

KRAFT PAPER, phenolic resin impregnated, resin content in the range
 of 40% to 50% and weight NOT exceeding 120 gsm

PAPER, INKJET, bleached, polymer resin coated, weight NOT 
greater than 150 grams per square metre

PAPERBOARD, BLEACHED, sheets, being laminated AND/OR coated 
with ALL of the following:
  (a) kraft paper;
  (b) clear polyolefin;
  (c) aluminium foil;
  (d) coloured polyolefin;
  (e) polyester film

PAPER, having BOTH of the following:
  (a) one side laminated with peelable polymers;
  (b) weight NOT less than 120 grams per square metre

PAPER, coated with extruded polyethylene, silicone coated on 
both sides

WRAPPERS, paraffin waxed paper strip glued to polypropylene film,
 having ALL of the following:
   (a) polypropylene film layer NOT exceeding 20 gsm;
   (b) paper layer NOT exceeding 42 gsm;
   (c) paraffin wax layer NOT exceeding 12 gsm

KRAFT PAPER, phenolic resin impregnated, resin content in the range
 of 40% to 50% and weight NOT exceeding 120 gsm

TEA BAG MATERIAL, made from bonded fibre manilla hemp and/or
 cellulosic or synthetic fibres, complying with FDA requirements,
 treated with a wet strength resin, having a grammage of 10 g/sq m
 or greater but NOT exceeding 40 g/sq m

FILTER PAPER, in rolls, having a minimum linear length of 500 m,
 having ALL of the following:
   (a) impregnated with natural or synthetic resins;
   (b) thickness 0.3 mm or greater but NOT exceeding 2.0 mm;
   (c) grammage 100 g/sq m or greater but NOT exceeding 220 g/sq m;
   (d) permeability by the Frazier Method 5 CFM or greater
       but NOT exceeding 110 CFM

PAPERBOARD, impregnated, NOT surface coated, having ALL of the
 following:
   (a) impregnated with NOT less than 12% by weight of rubber;
   (b) density of 0.50 g/cu cm or greater;
   (c) caliper of 0.45 mm or greater;
   (d) weight of 250 g/sq m or greater

ELECTRICAL INSULATING PAPER, printed, conforming to International
 Standards IEC 554 or IEC 641

COLOURED PAPER, flint glazed, having a grammage of 67 g/sq m or
 greater but NOT exceeding 77 g/sq m

PHOTOGRAPHIC PAPER, having BOTH of the following:
  (a) resin layer coating on both sides;
  (b) micro-porous ink receiving layer on one side

PACKING OR JOINTING MATERIAL, having a base of cellulose fibre,
 bonded with ANY of the following which comprises NOT less than 10%
 of the total mass of the material:
   (a) natural rubber;
   (b) synthetic rubber;
   (c) blend of natural and synthetic rubber;
   (d) glue glycerine composition binders

SATURATING BASE PAPER, printed with a decorative pattern, NOT coated
 or impregnated with synthetic resins

PAPER, Bleached Kraft,cellulose, saturated with synthetic rubber
 latex and release coated.

PAPERBOARD, coated, including ALL of the following:
  (a) dispersion barrier coating on one OR both sides;
  (b) bleached chemical pulp outer plys;
  (c) bleached chemi-thermomechanical pulp

PAPER, THERMAL IMAGING, including ALL of the following:
  (a) weight NOT less than 48 gsm;
  (b) width NOT less than 230 mm;
  (c) length NOT less than 2 500 m

PAPER, metalized, weight NOT less than 55 gsm

PAPER, THERMAL IMAGING, having ALL of the following:
  (a)  weight NOT less than 48 gsm; 
  (b)  width NOT less than 400 millimetres;
  (c)  length NOT less than 7 000 metres

DROP SHEETS, having BOTH of the following:
  (a) absorbent paper;
  (b) plastic layer

PAPER, thermal imaging, non-topcoated, in rolls, having ALL of 
the following;
  (a) roll width not less than 1 175 mm;
  (b) weight not greater than 77 grams per square metre;
  (c) moisture content not greater than 7%;
  (d) thickness NOT less than 81 microns and NOT greater than
      85 microns

PAPER, woodfree, coloured, in rolls, having ALL of the following:
  (a) width not less than 990 mm and not greater than 1530 mm;
  (b) coated on one side with fluorescent formaldehyde based 
      coating;
  (c) weight not less than 75 gsm and not greater than 80 gsm

PAPER, BAKING AND/OR COOKING, silicone polymer coated, non-stick

GREASEPROOF PAPER

PAPER, thermal imaging, having a weight NOT greater than 70 gsm 
and a width NOT less than 400 mm and a length NOT less than 5 
000 metres

PAPER, NON-STICK BAKING AND COOKING, IN ROLLS, having ALL of 
the following;
(a) bleached greaseproof paper base;
(b) coated on both sides with silicone polymer;
(c) weight not less than 36 gsm and not greater than 41 gsm;
(d) heat resistant to 230 degrees Celsius;
(e) width not less than 380 mm

PAPER, THERMAL IMAGING, having a weight NOT greater than 70 gsm 
AND a width NOT less than 400 millimetres AND a length NOT less 
than 10 000 metres

PAPER, BAKING AND/0R COOKING, IN SHEETS, having ALL of the 
following:
  (a) silicon polymer coated;
  (c) weight NOT less than 36 gsm and NOT greater than 49 gsm;
  (d) width NOT less than 40 cm;
  (e) length NOT less than 70 cm

PAPER EDGE BANDING, in rolls, having BOTH of the following:
  (a) thickness NOT less than 0.23 mm and NOT greater than
      0.45 mm;
  (b) width NOT less than 21 mm and NOT greater than 700 mm

PAPER, NON-STICK BAKING AND COOKING, in rolls, comprising ALL of the
 following:
   (a) bleached greaseproof paper base;
   (b) coated on BOTH sides with silicon polymer;
   (c) weight NOT less than 36 gsm and NOT greater than 41 gsm;
   (d) heat resistant to 230 degrees Celsius;
   (e) width NOT less than 295 mm and a roll diameter of NOT less
       than 500 mm

WALL PAPER, vinyl coated, width NOT exceeding 55 cm

WALLPAPER, paper backed

WALLCOVERINGS, including BOTH of the following:
  (a) in rolls width NOT less than 1 000 mm;
  (b) weight NOT less than 150 grams per square metre

PAPER, SELF COPY, carbonless

CARBONLESS MULTIPLY PAPER

FILM, paper based, in sheet form, capable of accepting wax
 crayon hand drawings or computer initiated imagery as transfers
 for the purpose of application to garments or fabrics by means
 of a heated iron-on process

PHOTOGRAPHIC PAPER, non-light sensitive, coated on both sides with
 polyethylene and coated on one or both sides with a gelatine image
 receiving layer

PLAIN POSTCARDS, comprising NOT less than 75% elephant dung

BOXES AND/OR POUCHES AND/OR WRITING COMPENDIUMS, having 
coverings AND/OR paper with a composition of NOT less than 75% 
processed elephant dung

LINEN, TABLE, pre cut, wood cellulose and ethylene vinylacetate 
copolymer

PAPER TOILET SEAT COVERS, sanitised, disposable, cut to size

TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in 
rolls having a width NOT less than 230 mm and NOT greater than 
310 mm

TABLE NAPKIN STOCK, in rolls, having a width NOT exceeding 360 mm

TABLE NAPKIN STOCK, wood cellulose, single ply OR multi-ply, in 
rolls, having a width NOT less than 310 mm and NOT greater than 
360 mm

PADS, PUPPY TRAINING, disposable, laminated, including ALL of 
the following:
  (a) waterproof plastic film base;
  (b) paper pulp padding;
  (c) bonded fibre fabric top layer

AIRLAID ABSORBENT PAPER, in rolls or sheets, sanitary

DRAPES, SURGICAL, disposable

GIFT BOXES, corrugated recycled paper

PAPERBOARD CONTAINERS, flatpack, printed, whether OR NOT in 
rolls OR sheets, having ALL of the following:
  (a) capacity greater than 125 ml and NOT greater than 2 100 ml;
  (b) multi-layer construction having ANY three OR more
      of the following layers;
          (i) printing inks;
         (ii) outside polyethylene layer;
        (iii) paperboard;
         (iv) lamination polyethylene layer;
          (v) aluminium foil layer;
         (vi) adhesive polyethylene AND/OR metallocene linear
              low density polyethylene AND/OR metallocene

PAPERBOARD CONTAINERS, polyethylene coated, printed, in flatpack 
form, having ALL of the following: 
  (a)volume NOT less than 200 ml and NOT greater than 1 100 ml;
  (b)cross section at base NOT less than 65 mm and NOT greater 
than 70 mm;
  (c)length NOT less than 140 mm and NOT greater than 300 mm;
  (d)trilaminate construction with 
polyethylene/paperboard/polyethylene layers

BOXES, PAPER AND/OR PAPERBOARD, having ALL of the following:
  (a) lock-in tabs;
  (b) wire handle;
  (c) width NOT greater than 8 cm;
  (d) height NOT greater than 9 cm

CARTONS, paperboard, flat packed, having BOTH of the 
following:
  (a) lock-in tabs;
  (b) clear plastic window on one side

FILTER BAGS, vacuum cleaner, disposable

BAGS/POUCHES, self sealing, composite construction of plastic and
 paper sheeting

DUST BAGS, VACUUM CLEANER, disposable, with filter bags, packed in
 sets, each set containing:
  (a) a minimum of five dust bags;
  (b) a maximum of two filter bags; and,
  (c) with OR without herbal pads, to a maximum of two.

BAGS, kraft paper, sidefold hotmelt, having BOTH of the 
following:
  (a) density NOT exceeding 75 g/m3; 
  (b) length NOT less than 1 290 mm

POUCHES, FOOD, OVEN OR GRILL, having a maximum temperature 
rating NOT less than 210 degrees Celsius

BAGS AND/OR POUCHES, having BOTH of the following:
  (a) plastic side AND paper side;
  (b) bag base width less than 40 cm

BAGS, KRAFT PAPER, back overlap seam, hot melt glued front 
panel, having BOTH of the following:
  (a) weight NOT less than 55 grams per square metre and NOT
      greater than 75 grams per square metre;
  (b) gusset length NOT less than 12 mm and NOT greater 
      than 18 mm

BAGS, GIFT, paper, incorporating a cord handle

CONES, FOOD, paperboard, coated on one side, flat packed

BAGS, BREAD, paper and plastic sheeting

KRAFT PAPER, flat or gusseted, one side wet strength paper and one
 side a clear film of polyester and polypropylene composition with a
 steam autoclave indicator

PAPER INSERTS, printed OR unprinted, having ALL of the 
following;
  (a) kraft paper NOT greater than 165 g/m2;
  (b) pre-formed cavity

PAPER INSERTS, printed OR unprinted, having ALL of the 
following;
  (a) kraft paper NOT less than 55 g/m2 and NOT greater than
      150 g/m2,
  (b) pre-formed cavity

SLEEVES, CUTLERY, having a paper weight NOT less than 100 gsm

SLEEVES, CUTLERY, having BOTH of the following:
  (a) integrated paper napkin;
  (b) width NOT less than 44 mm and length NOT greater than 
      240 mm

WEDGES, paperboard, flat packed, incorporating a poly lactic 
acid film window

SLEEVES, DISC, paper with clear film window

SLEEVES, tubular, cardboard, having ALL of the following:
  (a) internal aluminium lining;
  (b) hermetically sealable;
  (c) laser half cut;
  (d) length NOT exceeding 350 mm

CONTAINERS, PACKING, having BOTH of the following:
   (a) width NOT greater than 15 cm and length NOT greater than 
       30 cm;
   (b) belt drives

BOXES, STORAGE, fibreboard, having metal corner reinforcements 
and fittings

BOOKS, combined name, address and telephone, with pages
 alphabetically thumb indexed

DIARIES, locking

PAPER AND PAPER PRODUCTS, having a composition of NOT less than 
75% elephant dung

BOOKS, EXERCISE, handmade from handmade paper, having ALL of the 
following:
  (a) blank inside pages;
  (b) printed cover;
  (c) composition of NOT less than 75% processed elephant dung

COVERS, DOCUMENT

STOCK BOOKS, philatelic, bound, plain (that is, without printed
 pictures or text)

PHOTOGRAPH ALBUMS, having ALL of the following:
   (a) photograph display pages consisting of two pages glued
       together with cut out shapes to display the photographs;
   (b) designs printed on the photograph display pages;
   (c) glassine pages between the photograph display pages

ALBUMS, postage stamp, bound

ALBUMS, TRADING CARD, having plastic pockets

DOCUMENT DIVIDERS, paper, single sheet, including tabs

COVERS, DOCUMENT

LABELS, TEA BAG, on reels, having BOTH of the following:
  (a) width NOT greater than 26 mm;
  (b) length NOT greater than 56 mm

LABELS, thermal transfer, self adhesive, having ALL of the 
following:
  (a) paper layer;
  (b) metal carrier layer;
  (c) adhesive layer;
  (d) heat resistance to 350 degrees C

TEA BAG MATERIAL, made from bonded fibre manilla hemp and/or
 cellulosic or synthetic fibres, complying with FDA requirements,
 treated with a wet strength resin, having a grammage of 10 g/sq m
 or greater but NOT exceeding 40 g/sq m

CASES, BAKING, greaseproof, having ALL of the following:
   (a) outside rim diameter NOT less than 88 mm;
   (b) top inside diameter NOT less than 78 mm;
   (c) bottom diameter NOT less than 60 mm;
   (d) vertical height NOT less than 43 mm;
   (e) volume NOT less than 145 cc

BAKING MOULDS, paper, round base OR rectangular base, 
having BOTH of the following: 
  (a) height NOT greater than 75 mm;
  (b) base side OR base diameter NOT greater than 300 mm

CONTAINERS, FOOD AND/OR BEVERAGE, PAPERBOARD, compostable with 
OR without lids, having a polylactic acid (PLA) lining

CAKE BOARDS, with OR without foil covered topside

PLATES, paper

TRAYS, SERVING, laminated paperboard or laminated cardboard

CASES, BAKING, greaseproof, having ALL of the following:
   (a) outside rim diameter NOT less than 88 mm;
   (b) top inside diameter NOT less than 78 mm;
   (c) bottom diameter NOT less than 60 mm;
   (d) vertical height NOT less than 43 mm;
   (e) volume NOT less than 145 cc

PROFILES, TUBES AND PIPES made from electrical insulating paper,
 paperboard, pressboard or presspaper conforming to International
 Standard IEC 554 or International Standard IEC 641, but NOT
 including goods wholly or principally of paper and paperboard
 cooled or impregnated with phenoliformaldehyde artificial resin

FILTERS, thimble shape, of cellulose.

HOLDERS, CD'S AND/OR DVD'S

CONTAINERS, moulded, leaf bleached kraft pulp, being ANY one OR 
more of the following:
  (a) bowls;
  (b) plates;
  (c) lids;
  (d) trays;
  (e) takeaway food

PLATES, bagasse, disposable

CONTAINERS, TAKE-AWAY FOOD, moulded, disposable, bamboo OR sugar 
cane pulp

PANS AND/OR CASES, PATTY AND/OR MUFFIN, corrugated

HOLDERS, CD'S AND/OR DVD'S

KRAFT PAPER, flat or gusseted, being a combination of wet strength
 paper and a clear film of 12 microns polyester/50 microns
 polypropylene with a steam autoclave indicator

PATTERNS, paper, garment making type

PAPER, joss, religious service

ENDSHEETS, oversew, book binding, being BOTH of the following:
   (a) made from acid free paper sheets having a pH reading of NOT
       less than 7;
   (b) cut to size, folded, glued and having a reinforced strip of
       tape

HINGES, stamp

PAGES, photo album, coated on both sides with adhesive, covered
 by clear unplasticised film

DOYLEYS, paper lace

SUPPLEMENTS TO LOOSE-LEAF POSTAGE STAMP ALBUMS, illustrated, but
 NOT including ANY of the following or ANY combination thereof:
   "One country" supplements for Australia, Australian States, New
   Zealand, Papua New Guinea, Samoa, Australian Dependencies
   (Norfolk Island, Nauru, Cocos (Keeling) Islands, Christmas
   Island and Antarctic), Gilbert and Ellice Islands, Gilbert,
   Tuvalu, Kiribati, Tokelau, Pitcairn, British Antarctic
   Territories, Falkland Island Dependencies, South Georgia,
   French Antarctic Territories, Vanuatu, Solomon Islands, Fiji,
   British Commonwealth and Royal Wedding Albums (issued to
   commemorate the Wedding of HRH Prince Charles to Lady Diana
   Spencer)

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT greater than 36 cm;
  (b) weight NOT less than 115 gsm and NOT greater than 120 gsm;
  (c) machine finished

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT greater than 36 cm;
  (b) weight NOT less than 60 gsm and NOT greater than 115 gsm;
  (c) machine glazed OR machine finished

KRAFT PAPER, bleached AND uncoated, having ALL of the following:
  (a) roll width NOT greater than 36 cm;
  (b) weight NOT less than 35 gsm and NOT greater than 60 gsm;
  (c) machine glazed

GUARDS, COAT HANGER, TROUSER, non-slip

PAPER, PRESSPAPER OR PRESSBOARD, ELECTRICAL INSULATING, conforming
 to either International Standards IEC 554, IEC 641 or IEC 763

BOARD, WOOD PULP, 380 g/sq m OR greater AND a thickness of NOT less
 than 1 mm

BANDS, SPOOL CHANGE OVER SYSTEM, being of repulpable paper,
 bleached or unbleached and consisting of individual spun paper
 joined together

CONE SLEEVES, preformed and printed, capable of accepting wafer
 cones.

MOBILES, constructed chiefly of papier mache, original and
 copyright creations of Ole and Christian Flensted.

PAPERBOARD ENDS, heat seal, diameter NOT less than 70 mm and NOT 
greater than 100 mm, having ALL of the following:
  (a) PET lacquer thickness NOT greater than 6 gsm;
  (b) aluminium foil thickness NOT greater than 17 gsm;
  (c) paper thickness NOT greater than 283 gsm

PAPER, non woven, wetlaid cellulose AND viscose, having ALL of 
the following:
  (a) width NOT less than 50 mm and NOT greater than 390 mm;
  (b) weight NOT greater than 31 gsm;
  (c) roll length NOT greater than 1 400 m

TUBING, LABORATORY AND MEDICAL, in rolls, having BOTH of the 
following:  
  (a) sterilisation indicator;
  (b) paper covered one side AND plastic film other side

DIVIDERS, BOTTLE OR JAR PACKAGING, single layered cardboard OR
corrugated cardboard, having NOT greater than 24 bottle OR jar 
inserts

BAGS, EGG POACHING

PAPERBOARD, having ALL of the following:
  (a) thickness NOT less than 0.5 mm;
  (b) weight NOT less than 430 gsm;
  (c) plybond strength NOT less than 550 J/m2;
  (d) width NOT greater than 360 mm

PAPER AND/OR PAPERBOARD, honeycomb

PATTERNS, PAPER, being EITHER of the following:
   (a) sewing;
   (b) craft