Tariff Concession Orders

WOOD CHIPS, oak (quercus SPP.)

WOOD CHIPS, aspen

CHIPS, beechwood

OAK, rough quarter sawn or quarter split

SALIX ALBA VAR CAERULEA, cleft

VENEER, dyed or plain, thickness NOT less than 0.2 mm and NOT
 greater than 3.1 mm

PANELS, VENEER, tropical wood, dyed, lacquered, phenolic 
impregnated backing, having a thickness NOT less than 0.6 mm 
and NOT greater than 1 mm

VENEER, dyed or plain, thickness NOT less than 0.2 mm and NOT
 greater than 3.1 mm

VENEER, dyed OR plain, thickness NOT less than 0.2 mm and NOT
 greater than 3.1 mm

VENEERS, BLACK CHERRY (also known as cabinet cherry, rum cherry,
 whisky cherry, wild cherry, black rum cherry and wild black cherry)

WALLCOVERING, WOOD VENEER, five-ply, having ALL of the following:
  (a) wood veneer;
  (b) paper;
  (c) foil;
  (d) glue barrier;
  (e) paper layers;
  (f) total thickness NOT greater than 3 mm

VENEERS, WOOD, dyed OR plain, having a thickness NOT less than 
0.2 mm and NOT greater than 3.5 mm

VENEERS, BLACK CHERRY (also known as cabinet cherry, rum cherry,
 whisky cherry, wild cherry, black rum cherry and wild black cherry)

ORIENTED STRAND BOARD, thickness NOT greater than 11 mm

ORIENTED STRAND BOARD, multi-layered, flat-pressed

PANELS, PARTICLE BOARD, pasted AND compressed flax fibre

MEDIUM DENSITY FIBREBOARD, having ALL of the following:
  (a) thickness NOT greater than 9 mm;
  (b) density NOT greater 0.8 g per cubic centimetre;
  (c) dyed OR pigmented solid colour;
  (d) moisture resistant conforming to AS/NZS 1859.2:2017

MEDIUM DENSITY FIBREBOARD, having ALL of the following:
  (a) thickness NOT less than 9 mm and NOT greater 50 mm;
  (b) density NOT greater than 0.8 g per cubic centimetre;
  (c) dyed OR pigmented solid colour;
  (d) moisture resistant conforming to AS/NZS 1859.2:2017

PANELS, MEDIUM DENSITY FIBREBOARD (MDF), group 1 fire retardant 
classification complying with Australian and New Zealand 
Standard 3837:1998 (ASNZS 3837:1998), having BOTH of the 
following:
  (a) thickness NOT less than 10 mm and NOT greater than 80 mm;
  (b) density NOT greater than 0.8 g per cubic centimetre

FIBREBOARD, having a density NOT less 0.94 g/cm3 and NOT 
greater than 1.10 g/cm3

DIVIDERS, PALLET, fibreboard

DOOR SKINS, hardboard, having a density NOT less than 900 kg/m3

FIBREBOARD, low density, having BOTH of the following:
  (a) thickness NOT less than 10 mm and NOT greater than 
      13 mm;
  (b) density NOT greater than 400 kg/m3

SHEETS, SOFTWOOD FIBREBOARD, having ALL of the following:
  (a) polypropylene coated AND polypropylene fabric reinforced
      kraft paper outer liner;
  (b) polypropylene coated kraft paper inner liner;
  (b) thickness NOT less 8 mm and NOT greater 12 mm

FIBREBOARD, low density, having BOTH of the following:
  (a) thickness NOT less than 8 mm and NOT greater than 60 mm;
  (b) density NOT greater than 470 kg/m3

FIBREBOARD, low density, having BOTH of the following:
  (a) thickness NOT less than 10 mm and NOT greater than 
      13 mm;
  (b) density NOT greater than 400 kg/m3

PLYWOOD, polyester coated paper overlay

DOOR SKINS, PLYWOOD, having ALL of the following:
  (a) thickness NOT greater than 3.6 mm;
  (b) width NOT less than 500 mm and NOT greater than 1 332 mm;
  (c) length NOT less than 2 000 mm and NOT greater than 3 050 mm

PANELS, plywood, having ALL of the following:
  (a) density NOT less than 700 kg per cubic metre;
  (b) thickness NOT less than 12 mm and NOT greater than 35 mm;  
  (c) length NOT less than 2 400 mm and NOT greater than
      3 100 mm;  
  (d) width NOT greater than 1 250 mm, 
  (e) face layer finish being EITHER of the following:
         (i) single colour OR wood grain pattern;
        (ii) raw

PANELS, plywood, having ALL of the following:
  (a) density NOT greater than 430 kg per cubic metre;
  (b) thickness NOT less than 9 mm and NOT greater than
      25 mm;
  (c) length NOT less than 2 500 mm and NOT greater
      than 3 100 mm;
  (d) width NOT less than 1 220 mm and NOT greater than 
      1 530 mm;
  (e) complying with British Standard BS EN 314-2:1993, 
      Bonding Class 3:exterior conditions

PANELS, plywood, having ALL of the following:
  (a) impregnated with nitrogen phosphate salts;
  (b) thickness NOT less than 6 mm and NOT greater than 50 mm;
  (c) length NOT less than 2 500 mm and NOT greater than 
      3 100 mm; 
  (d) width NOT less than 1 220 mm and NOT greater than 1 530 mm;
  (e) density NOT less than 460 kg/m3 and NOT greater than 
      520 kg/m3;

WOOD, laminated, compressed, having electrical properties conforming
 to DIN standard 7707

EDGING, multi-layered veneer, wooden, continuous rolls, thickness
 NOT less than 1 mm and NOT greater than 4 mm, width NOT less than
 20 mm and NOT greater than 40 mm

MASONRY MOULDING LOAD BOARDS, including ALL of the following:
  (a) solid wood core;
  (b) polyurethane coating;
  (c) galvanised steel profiles

MASONRY MOULDING LOAD BOARDS, wood AND plastic composite, having 
ALL of the following:
  (a) compressed core;
  (b) laminated veneer;
  (c) polyurethane coated

STAVES, oak, roughly planed

ROOF WINDOWS, having ALL of the following:
   (a) watertight fitting;
   (b) pivotting sash;
   (c) timber interior finish;
   (d) toughened double glazing;
   (e) heatstop tinting;
   (f) argon gas between the panes

SHINGLES OR SHAKES, roofing, western red cedar

SHEETS, recycled, composite, being wood AND plastic

PANELS, ACOUSTIC, medium density fibreboard

TABLEWARE AND KITCHENWARE, being bamboo chopsticks

KNIFE BLOCKS, bamboo, having ANY of the following:
  (a) stainless steel decorative panels;
  (b) plastic AND/OR rubber protective inserts;
  (c) NOT greater than 9 knife AND/OR shear inserts

SKEWERS, bamboo

KNIFE BLOCKS, wood, having ANY of the following:
  (a) stainless steel decorative panels;
  (b) plastic AND/OR rubber protective inserts;
  (c) NOT greater than 9 knife AND/OR shear inserts

BOARDS, CAKE DISLAY, wood, silver foil covering

KITCHENWARE, beechwood, being EITHER of the following: 
  (a) spoons;
  (b) turners

TABLEWARE AND/OR KITCHENWARE, being wooden spoons

KITCHENWARE, being wooden spoons having a silicon covered handle 
end

SETS, KITCHENWARE, wood, having NOT less than two spoons, with 
or without spatulas

WOODEN SKEWERS

CORBELS, WOOD, CARVED, unstained

SHAPES, handcrafts, being cut out calligraphic or graphic
 representations or carvings, with or without printed painting
 guidelines

MINIATURE MUSICAL INSTRUMENT ORNAMENTS

MOBILES, constructed chiefly of wood

PLAQUES, religious

CRUCIFIXES, religious

SHRINES AND STATUES, religious

BEADS, drilled or perforated

CORBELS, WOOD, CARVED, unstained

RACKS, STORAGE, COMPACT DISC

JEWELLERY BOXES, incorporating a musical movement

CURTAIN, door, made of bamboo

NAILS, compressed beechwood

TENONS, JOINERY, beechwood OR hardwood, having a length NOT 
greater than 75 cm

EASTERN RED CEDAR (JUNIPERUS VIRGINIANA) ARTICLES, put up for retail
 sale as natural cedar pesticides

CURTAIN FITTINGS, being ANY of the following:
   (a) rings;
   (b) brackets;
   (c) finials;
   (d) poles

SHAPES, handcrafts, being cut out calligraphic or graphic
 representations or carvings, with or without printed painting
 guidelines

BED SLATS, laminated birch

STICKS AND/OR STIRRERS, wood, being EITHER of the following:
  (a) ice cream sticks;
  (b) coffee stirrers

PEGBOARD, having a density NOT less than 0.94 g/cm3 and NOT 
greater than 1.10 g/cm3

PEGS, wooden, having a length NOT greater than 40 mm

WOODEN BEADED CAR SEAT COVERS OR CUSHIONS

FRAMES AND STANDS, handworked tapestry, adjustable

HOOPS, hand quilting or embroidery, with or without clamp or 
stand

MATS, rubberwood, in slats

GATES OR BARRIERS, CHILD SAFETY, wood, with OR without 
fittings

PARTS, TOBACCO STORAGE BINS, PLYWOOD, whether or not having a 
surface of base papers impregnated with phenolic resin, being 
EITHER of the following:
  (a) lids having metal edging strips;
  (b) side walls "L" configuration having metal join strip

BEADS, rosary

TOOTHPICKS, bleached or unbleached, but NOT dyed or otherwise
 coloured

BEADS, drilled or perforated

STANDS, PLATE

CUTICLE STICKS