Tariff Concession Orders

CONVEYORS, SORTING, comprising ALL of the following:
  (a) anodised aluminium slats;
  (b) electric magnetic diverters;
  (c) sorter controls

ROLLERS, PRE CAST CONCRETE PRODUCTION STATION, being rectangular
posts with flanged rollers, with OR without hydraulic height 
adjustment

REHANGER AND TRANSFER MACHINES, POULTRY CARCASS

CONVEYORS, CROSS BELT SORTATION, including rails

PARCEL AND/OR CARTON SORTING MACHINES, including ALL of the 
following:
   (a) conveyor;
   (b) sensors;
   (c) actuator arms;
   (d) sliding shoe sorter pads

CONVEYORS, ROLLER OR CHAIN, having BOTH of the following:
  (a) ceramic AND/OR steel lined side guides;
  (b) chain conveyor maximum operating temperature exceeding 
      295 degrees Celsius,
with OR without EITHER of the following:
        (i) chain conveyor to roller conveyor transfer wheels;
       (ii) roller conveyor to chain conveyor transfer wheels

CONVEYORS, TELESCOPIC BELT, having ALL of the following:
  (a) maximum load capacity NOT less than 50 kg per m;
  (b) maximum belt speed capacity NOT less than 40 m per min;
  (c) conveyor belt width NOT less than 800 mm;
  (d) conveyor height NOT greater than 800 mm

ROLLER CONVEYORS, STEEL DRUM

CONVEYORS, spiral, shaftless

ROLLERS AND/OR CONVEYORS, MELAMINE AND FIBREBOARD LAMINATION 
LINE, programmable logic controlled, being ANY of the following:
  (a) nip rollers;
  (b) toothed-belt conveyors;
  (c) roller conveyors;
  (d) belt conveyors

PARCEL SORTERS, BI-DIRECTIONAL CONVEYOR BELT, with OR without 
steel sorting chutes, having ALL of the following:
  (a) linear induction motor drives;
  (b) extruded AND/OR formed tracks;
  (c) sorting conveyor belt speed NOT greater than 2.5 m/s

SPIRAL CONVEYORS, having metal chains and slat belts

CONVEYORS, PIPE

CONVEYORS, OVERHEAD, POULTRY PROCESSING LINE

CONVEYORS, PAN, with or without inspection AND/OR operator 
platform

DIVIDERS AND/OR ALIGNERS AND/OR TURNERS

CONVEYORS, VERTICAL LIFT

CONVEYORS, FLEXIBLE, MODULAR, comprising ALL of the following:   
  (a) conveyor speed NOT less than 3 m/min and NOT greater
      than 50 m/min;                                             
  (b) temperature range NOT less than minus 20 degrees celsius 
      and NOT  greater than 60 degrees celsius;                  
  (c) minimum bend radius of 160 mm

UNLOADERS, BULK SILO, having BOTH of the following:
   (a) output feed capacity 60 cu m/h OR greater;
   (b) dust sweep diameter 25 m OR greater

CONVEYORS, belt driven powered roller, comprising ALL of the
 following:
   (a) reversible drive DC motors;
   (b) expandable lengths;
   (c) lockable caster wheels;
   (d) adjustable leg length;
   (e) conveying capacity NOT greater than 150 kg/lineal meter

CONVEYOR SYSTEM, powered roller, being the following:
   (a) motorised;
   (b) belt driven;
   (c) roller conveyor;
   (d) zinc rollers;
   (e) system maximum expandable lengths of 3.7 m, 7.4 m, 11 m and
       14.6 m;
   (f) compactable length;
   (g) system height adjustable from 724 mm to 1 134 mm;
   (h) flexible horizontal side to side movement;
   (i) portable;
   (j) maximum carrying capacity of 150 kg/m;
   (k) 4 degrees maximum slope;
   (l) roller widths of 450 mm, 600 mm or 750 mm;
   (m) roller diameters of 38 mm or 48 mm;
   (n) sound pressure level NOT to exceed 70 d B(A)

FEEDERS, LOG AND SAWN TIMBER SAWLINE, PLC, being EITHER
 of the following:
   (a) chain driven;
   (b) roller bed

GRAIN CONVEYORS, TROUGH CHAIN, having ALL of the following:
  (a) one-way direction conveying troughs with return rolls 
      AND inspection window;
  (b) throughput capacity NOT exceeding 100 t/h;
  (c) conveyor velocity NOT greater than 0.65 m/s;
  (d) angle inclination NOT greater than 15 degrees

EXTRUSION HANDLING SYSTEM, programmable logic controlled, having 
EITHER of the following,
  (a) lateral roller conveyors with hydraulic height adjustment;
  (b) longitudinal roller conveyor

COMPOST HANDLING LINE, hydraulic AND/OR electrically-powered, 
including ALL of the following:
 (a) hoppers;
 (b) conveyors;
 (c) weighers;
 (d) scraper chains;
 (e) motors;
 (f) gearboxes

TROUGH CHAIN CONVEYOR ASSEMBLIES, consisting of ALL of the 
following:
  (a) driving station, including ALL of the following:
         (i) frame;
        (ii) geared motor;
       (iii) shaft;
        (iv) drive sprocket wheel,
  (b) tensioning station, including ALL of the following:
         (i) frame;
        (ii) bearing unit;
       (iii) reversing wheel,
  (c) troughs; 
  (d) cleaner and/or washing units

ACCUMULATION AND CONVEYOR SYSTEM, LINEN, programmable logic 
controlled, with OR without radio frequency readers AND/OR
antennae, having ALL of the following:
  (a) free standing units;
  (b) transport conveyors;
  (c) buffer conveyors;
  (d) powered curves;
  (e) lift conveyors;
  (f) roller conveyors;
  (g) packaging unit front stack centre positioning;
  (h) pushers;
  (i) communication terminal

CONVEYING MACHINES, ORGANIC MATTER, self-propelled, including 
ALL of the following:
 (a) elevator, having ALL of the following:
      (i) length NOT greater than 8.3 m;
     (ii) width NOT greater than 4.6 m;
    (iii) planetary gearbox rated NOT less than 7.5 kW;
     (iv) scraper chains;
      (v) scraper bars;
     (vi) steel frame,
 (b) kick back drum;
 (c) auger;
 (d) swivel belt conveyor, having ALL of the following:
      (i) belt length NOT more than 7 m;
     (ii) belt width NOT more than 1.1 m;
    (iii) hydraulic cylinders;
     (iv) electric motor;
      (v) belt pulley,
 (e) planetary wheel drives, having a diameter NOT less than 
     1.1 m and a thickness NOT less than 400 mm;
 (f) steering wheels, having a diameter NOT less than 580 mm and
     a thickness NOT less than 240 mm;
 (g) electric control box

ROLL CONVEYORS, programmable logic controlled, with OR without 
guiding fences, having ALL of the following: 
  (a) roller driven;
  (b) width NOT greater than 3.5 m;
  (c) length NOT greater than 20 m;
  (d) height NOT greater than 1.5 m;  
  (e) motor power NOT greater than 11 kW

CROSS CHAIN CONVEYORS, programmable logic controlled, with OR 
without guiding fences, having ALL of the following: 
  (a) width NOT greater than 16 m;
  (b) length NOT greater than 17.2 m; 
  (c) motor power NOT greater than 9 kW

SCREW CONVEYORS, WOOD CHIP, with OR without hoppers

UNSCRAMBLERS, LOG HANDLING AND CONVEYING, having ALL of the 
following:
  (a) helical screw rolls;
  (b) log diameter NOT less than 150 mm and NOT greater than 
      700 mm;
  (c) log length NOT less than 3 300 mm and NOT greater than 
      greater than 6 300 mm;
  (d) input NOT greater than 20 logs per min;
  (e) stop end chain;
  (f) side wall;
  (g) support frame

CONVEYORS, chain, programmable logic controlled, single OR 
double level, with OR without motorised wheels, having ALL of 
the following:
  (a) sensors;
  (b) micro-switches;
  (c) encoders;
  (d) loading cells;
  (e) scale display

ROLLER TRACKS, CONCRETE MOULD TRANSPORT, programmable logic 
controlled

HANDLING AND STORAGE MACHINES, TIMBER TRUSS PRODUCTION PLANT, 
having ALL of the following:
  (a) chain AND belt conveyors;
  (b) destacking unit;
  (c) transverse pushing unit;
  (d) truss boxes;
  (e) lifting unit

CHAIN CONVEYORS, LOG, longitudinal, programmable logic 
controlled, having ALL of the following: 
  (a) pre-centering unit;
  (b) chain tensioning device; 
  (c) log flights; 
  (d) drive motor AND shaft mounted gear; 
  (e) maximum operating speed NOT less than 150 metres per minute

COMPOST HOPPERS, steel, including ALL of the following: 
  (a) support frame;
  (b) dump box;
  (c) funnel;
  (d) levelling drum, having height adjustment;
  (e) scraper chain;
  (f) gear motors;
  (g) length NOT less than 580 cm;
  (h) overall width NOT less than 440 cm;
  (i) height NOT less than 410 cm; 
  (j) dumping channel width NOT less than 290 cm

ROD CONVEYORS, including ANY of the following:
  (a) drive units;
  (b) gears AND/OR bearings;
  (c) protection guides

CHAIN CONVEYORS, AEROSOL CAN MANUFACTURING LINE, plastic OR 
metal, magnetic, unassembled, having ALL of the following:
  (a) changeover lateral guides;
  (b) maximum capacity exceeding 350 cans per minute;
  (c) can diameter NOT less than 51.5 mm and NOT greater 
      than 66 mm;
  (d) maximum can height exceeding 25 mm

ROLLER CONVEYORS, HAND LUGGAGE TRAY, AIRPORT SCREENING LINE,  
including ALL of the following:
  (a) conveyor width NOT less than 600 mm;
  (b) tray dimensions being ALL of the following:
            (i) length NOT greater than 630 mm;
           (ii) width NOT greater than 530 mm;
          (iii) height NOT greater than 140 mm;
  (c) maximum tray capacity weight NOT greater than 25 kgs

CEREAL HANDLING CONVEYORS, being ANY of the following:
  (a) screw conveyors;
  (b) bucket elevators;
  (c) chain conveyors

CURING FRAME TRANSPORT AND BUFFER TRACK, programmable logic 
controlled, having ALL of the following:
  (a) roller tracks;
  (b) position sensors;
  (c) cable duct AND signal cables;
  (d) drive motors

PIZZA OVEN CONVEYOR SYSTEM, outfeed, including ALL of the 
following:
  (a) belt conveyors;
  (b) strap AND/OR mesh conveyors;
  (c) bend conveyors, including BOTH of the following:
         (i) belts;
        (ii) curved angle NOT greater than 100 degrees

BACKLIGHT TABLE, having rolling castors

REHANGER AND TRANSFER MACHINES, POULTRY CARCASS

SPIRAL CONVEYORS, BREAD ROLL AND/OR LOAF, unassembled, having 
ALL of the following:
  (a) stainless steel side profiles;
  (b) NOT less than 15 spiral tiers;
  (c) tiers pitch NOT greater than 200 mm;
  (d) clearance between tiers NOT greater than 210 mm

FRUIT ACCUMULATING AND PACKING LINE, programmable logic 
controlled, having BOTH of the following:
  (a) belt AND/OR roller conveyors;
  (b) weighing machines

SCRAPING CONVEYORS, GLASS CULLET, including ALL of the following:
  (a) steel plate trough;
  (b) parallel guided conveyor chains;
  (c) scraper irons
with OR without hot gob falling tubes

TRANSPORT CONVEYORS, BAKING TRAY, AC frequency drive, with OR 
without stoppers, including fixed side guiding

CONVEYOR SYSTEMS, HAND LUGGAGE, modular, having BOTH of the 
following:
  (a) belt AND/OR roller conveyor sections;
  (b) tray return system
with OR without luggage trays

PEAT BUNKER, including BOTH of the following
  (a) hopper; 
  (b) elevator,
with or without peat bunker extension

CONVEYORS, MEDIUM DENSITY FIBREBOARD AND/OR PARTICLE BOARD 
COOLER SYSTEM, being infeed AND/OR outfeed roller units

CONVEYORS, PARCEL AND/OR ENVELOPE, driven roller, including ALL 
of the following:
  (a) steel frame AND supports;
  (b) powered roller sections;
  (c) roller sections;
  (d) photocells;
  (e) control panel;
with OR without ANY of the following:
       (i) extendable table OR pivoting table;
      (ii) safety guards;
     (iii) safety covers;
      (iv) access covers

CONVEYORS, ROLLER AND/OR CHAIN AND/OR CROSS CHAIN, programmable 
logic controlled, having All of the following:
  (a) width NOT greater than 3.5 m;
  (b) length of each section NOT greater than 20 m;
  (c) height NOT greater than 1.5 m;
  (d) motor power of each section length NOT greater than 11 kW,
with OR without ANY of the following:
      (i) control panels;
     (ii) pallet destacker; 
     (ii) conveyor turntables or direction changing units;
     (iv) safety fencing

CONVEYORS, TUBE CHAIN, having ANY of the following:
  (a) revolution controller;
  (b) chain run-off controller;
  (c) chain tensioning device;
  (d) gearbox cylinder

ELEVATOR CHAIN CONVEYORS, FROZEN VEGETABLES, including ALL of 
the following:
  (a) cleats;
  (b) stainless steel chain AND/OR frame;
  (c) stainless steel bearings with PVC housings;
  (d) air cleaning nozzles;
  (e) infeed AND/OR outfeed tunnels;
  (f) capacity NOT greater than 12.5 tonnes per hour;
  (g) spraying bar;
  (h) safety protective discharge shoot

CONVEYORS, dual spiral with horizontal conveyor bridge, having 
ALL of the following: 
  (a) belt width NOT greater than 600 mm;
  (b) belt speed NOT greater than 30 m/min;
  (c) steel frame;
  (d) sensors;
  (e) lubrication unit

DOSING SCREWS, FEED MILL, having BOTH of the following:
  (a) capacity NOT greater than 10 cubic metres
      per hour;
  (b) screw blades having ALL of the following:
            (i) diameter NOT greater than 150 mm;
           (ii) thickness NOT greater than 5 mm;
          (iii) variable pitch

EDGER SAWING SYSTEM EQUIPMENT, being ANY of the following:
  (a) S-unscrambler;
  (b) viewing deck;
  (c) transverse scanner conveyor

FEEDING AND CONVEYING MACHINERY, INDUSTRIAL WASTE SHREDDER, 
being one OR both of the following:
  (a) step feeders;
  (b) drag chain conveyors

PLASTIC FLAKES UNLOADING STATION, having ALL of the following:
  (a) bag frames;
  (b) sensor levels;
  (c) unloading AND feed augers

WET PRODUCT FEEDER CONVERSION KITS, GLUTEN AND/OR STARCH DRYER, 
having ALL of the following:
  (a) agitated feed vessels with OR without supports;
  (b) screw conveyors;
  (c) rotary valve

VACUUM BELT CONVEYORS, CAN END

CHAIN CONVEYORS, having ALL of the following:
  (a) double chain configuration;
  (b) clogging sensor; 
  (c) gear-motors
with OR without high density polyethylene bottom AND scrapers

CONVEYING MACHINES, RECYCLING PLANT, being ANY of the 
following: 
  (a) dosing screws;
  (b) vibration chutes;
  (c) vertical conveying AND distribution screws;
  (d) reversing conveyor

BLAST FREEZER LINE, programmable logic controlled, including ALL 
of the following:
  (a) tunnel framework;
  (b) chain conveyor;
  (c) roller chains;
  (d) air guides

REEL HANDLING AND TRANSFERRING MACHINES, being transfer chain 
conveyors

SPIRAL CONVEYORS, continuous, having ALL of the following:
  (a) lateral roller system;
  (b) plastic slats AND metal chains;
  (c) load capacity NOT greater than 50 kg/m;
  (d) speed capacity NOT greater than 60 m/min;
  (e) angle of inclination NOT greater than 18 degrees;
  (f) reverse capability

CONVEYING MACHINES, RECYCLING PLANT, including ALL of the       
following:  
  (a) horizontal conveyor;  
  (b) dosing hopper;  
  (c) screw conveyor

ICECREAM SANDWHICH LINE, including ALL of the following:
  (a) tunnel framework;
  (b) chain conveyor;
  (c) roller chains;
  (d) air guides

CONVEYORS, WAFER SHEETS AND/OR BISCUITS, including ANY of the 
following:
  (a) round belt OR rope conveyors, 
with OR without EITHER of the following:  
          (i) extensions;
         (ii) swivel tables,
  (b) curved disc roller conveyors;  
  (c) elevator OR de-elevator conveyors; 
  (d) infeed rope buffer conveyors

PLASTIC CHAIN CONVEYORS, FOOD PRODUCTION, having ALL of the 
following:
  (a) chain width NOT greater than 140 mm;
  (b) conveyor load NOT greater than 20 kg;
  (c) operating speed NOT greater than 50 m/m;
  (d) motor power NOT less than 0.18 kW and NOT greater than 
      0.55 kW

ACCUMULATION AND TRANSPORT CONVEYORS, COMMERCIAL LAUNDRY, having 
polyvinyl chloride belts, including ANY 
of the following:
  (a) load AND/OR unload conveyors;
  (b) transport conveyors;
  (c) buffer conveyors;
  (d) powered curves;
  (e) lift shuttle conveyors;
  (f) roller conveyors;
  (g) wing conveyors;
  (h) band conveyors;
  (i) reversing belt conveyors;
  (j) belt conveyor

CONVEYORS, WASHING AND/OR DISINFECTING MACHINES, with OR without 
Gate AND/OR SLUICE, having one OR more of the following: 
  (a) loading AND/OR unloading of racks; 
  (b) cross-feed modules;
  (c) return system

FEED CONVEYOR EXTENSION, flexible pipe AND/OR umbilical cutting 
machine, with a length NOT less than 11 metres

DISCHARGE ELEMENTS, IN-TOTE BAGGAGE HANDLING, modular, including 
ALL of the following:
  (a) tilting sub-module;
  (b) width NOT less than 1 000 mm;
  (c) length NOT less than 2 300 mm;
  (d) tote trays, having ALL of the following:
          (i) length NOT less than 1 100 mm;
         (ii) width NOT less than 850 mm;
        (iii) height NOT less than 150 mm;
         (iv) weight NOT less than 13.5 kg;
  (e) tote capacity NOT greater than 52 kg weight

DOSING SCREW CONVEYOR, tubular, having ALL of the following:
  (a) inlet AND outlet spouts;
  (b) inspection hatch;
  (c) screw flights

SPIRAL CONVEYORS, having ALL of the following:
  (a) lateral roller system;
  (b) slats AND chains;
  (c) load capacity NOT greater than 50 kg/m;
  (d) speed capacity NOT greater than 60 m/min;
  (e) angle of inclination NOT greater than 18 degrees;
  (f) forward OR reverse conveying

CONVEYORS, SAWN TIMBER, chain, sideboard separating, 
programmable logic controlled, including ALL of the following:
  (a) chains with flights;
  (b) hydraulic adjustable outer chains;
  (c) non-driven vertical support rollers;
  (d) adjustable conical hold down rollers;
  (e) cross discharge chain conveyor

PRELOADER TABLES, METAL COATING LINE, steel strip feed, with OR 
without clamping unit AND/OR control cabinet

GRAIN AND/OR CEREAL AND/OR FLOUR HANDLING CONVEYORS, whether OR 
not assembled, being ANY of the following:
  (a) belt AND bucket elevators;
  (b) trough chain conveyors;
  (c) tube screw conveyors; 
  (d) trough screw conveyors

SPIRAL CONVEYORS, ICE CONFECTIONERY, having lamella plates 
positioners

CONVEYORS, SCREW, scum removal, having ALL of the following:
  (a) swivel arm mountings;
  (b) floating screw assembly;
  (c) forward bent screw flights;
  (d) electric drive motors;
  (e) plastic chains

PUCK CONVEYORS, ICE CONFECTIONERY, chain driven

VIBRATING FEEDERS, DIRECT REDUCED IRON SMELTING, ELECTRIC FURNACE

SCRAPER AND/OR SKIMMING COLLECTORS, including ALL of the 
following:
  (a) chain; 
  (b) flights AND wear shoes; 
  (c) sprockets; 
  (d) shafts; 
  (e) bearings;
  (f) mounting brackets;
  (g) wear strips; 
  (h) bolts;
  (i) drive unit

SAMPLERS, POWDER FILLING STATION, programmable logic controlled, 
including ALL of the following:
  (a) sampler housing;
  (b) mounting adapter;
  (c) sampling tube;
  (d) conveying screw;
  (e) drive assembly AND gearbox;
  (f) seals;
  (g) bushings;
  (h) gaskets

BUFFER STATIONS, TIMBER PANELLING, including ALL of the 
following: 
  (a) NOT less than two strands chain conveyor; 
  (b) safety light curtains; 
  (c) manual release interface; 
  (d) guarding AND/OR fencing

CONVEYORS, TIMBER PANEL HANDLING, including BOTH of the 
following: 
  (a) roller conveyors; 
  (b) guide rails

CONVEYORS, TIMBER PANEL PROCESSING, manual, including ALL of the
following: 
  (a) roller conveyors; 
  (b) guide rails; 
  (c) panel alignment stops

CONVEYORS, including ALL of the following:
  (a) gravity roller tracks;
  (b) speed controllers;
  (c) pallet separators;
  (d) safety guides;
  (e) floor support system