Tariff Concession Orders

SEATS, TRUCK, BUS OR TRACTOR, having ALL of the following:
   (a) adjustable torsion bar or air bag spring suspension;
   (b) shock absorber dampener;
   (c) adjustable lumbar support;
   (d) for and after isolators
 NOT being of a type used in passenger motor vehicles

SEATS, CAMPER MOTOR VEHICLE, including BOTH of the following:
  (a) seat belts;
  (b) bed conversion adjusters

SEATS, OPEN WHEEL SINGLE SEAT RACE CAR, extractable

SEATS, TRUCK OR BUS OR TRACTOR, adjustable suspension

MARINE SADDLES, being shock mitigation jockey seats

SEATING, BABY, being ANY of the following:
  (a) baby bouncers;
  (b) baby rockers;
  (c) baby swing seats with frames

THERAPEUTIC CHAIRS, weighted arms, with OR without footrest 
AND/OR frame with wheels

PARTS, SEAT, AUTOMOTIVE, being ANY of the following:
  (a) latches;
  (b) cables;
  (c) connection rods;
  (d) recliners;
  (e) recliner shafts;
  (f) lever recliner actuators;
  (g) lock shafts;
  (h) tracks;
  (i) seat slides

PARTS, TRUCK AND/OR BUS SEAT, being seat suspensions

PARTS, MOTOR VEHICLE SEAT, being lumbar support adjuster 
mechanism, having an electric motor

PARTS FOR STATIC SEATS, for trucks, buses or mobile equipment, being
 static seats having ALL of the following features:
   (a) driver OR co-driver only;
   (b) NOT including blow moulded plastic seats;
   (c) NOT including seats for passenger motor vehicles;
   (d) NOT including passenger seats for buses or coaches

FLOOR UNITS, ophthalmic, capable of being fitted with lamp
 assembly, arms or instrument console

BEDS, hospital, electrically operated, having BOTH of the
 following additional features and capabilities:
   (a) bilateral turning from supine to left or right up to a
       maximum of 60 degrees;
   (b) tilting from a centrally located pivot point to allow
       15 degrees vertical movement from the horizontal

BEDS, HOSPITAL, TREATMENT, having ALL of the following:
   (a) individual push button descent controls to adjust height and
       trendelenberg (tilt);
   (b) total lock and steer precision castors with up to four points
       of activation;
   (c) twin control pneumatic gas assisted Fowler back rest,
       infinitely adjustable to 90 degrees;
   (d) base structure with built-in oxygen cylinder holders;
   (e) side rails with in-built push handle system and half height
       function

OPTHALMIC EXAMINATION FURNITURE, being a combination of ANY of the
 following:
   (a) power patient chairs;
   (b) rotary operated tables utilising electromagnetic brakes with
       moveable foot controls for holding the table steady;
   (c) motorised stands incorporating an electric consol

CARTS, medical emergency, full access, having ALL of the following:
   (a) removable seamless plastic top;
   (b) retractable IV pole;
   (c) full access pull out drawers on bearing runners;
   (d) removable plastic drawer trays;
   (e) polyethylene cardiac board;
   (f) full swivel dual locking castors;
   (g) wrap around bumper;
   (h) breakaway security seals;
   (i) single motion dual door opening and locking

TROLLEY, medical, having ALL of the following features:
   (a) lightweight polymer construction;
   (b) directional controlled steering;
   (c) swing arm defibrillator platform;
   (d) dedicated storage areas comprising of draws and tilt out bins;
   (e) central security system

EXAMINATION CHAIRS, MAMMOGRAPHY AND/OR BIOPSY, including ALL of 
the following:
  (a) electric height adjustment;
  (b) adjustable head rest; 
  (c) batteries; 
  (d) castor wheels

PARTS, SURGICAL OPERATING TABLES, being ANY of the following:
  (a) floor-mounting plates;
  (b) floor-mounting plate covers;
  (c) table column positioning mechanisms;
  (d) table top operating panels for adjustment of table 
      position;
  (e) multi-part table tops;
  (f) pads;
  (g) cassette rails;
  (h) table top leg sections;
  (i) table top head sections;
  (j) table top upper back sections;
  (k) table top pelvic sections;
  (l) table top pelvic extension sections;
  (m) spiral positioning boards;
  (n) one-part carbon fibre table tops;
  (o) one part table tops with electrically motorised leg and  
      back section joint adjustment; 
  (p) one-part table tops with manual longitudinal shift;
  (q) one-part table top extension sections;
  (r) supports;
  (s) arm boards;
  (t) arm shields;
  (u) joint plates;
  (v) clamps;
  (w) side rails;
  (x) adapters;
  (y) head rests;
  (z) X-ray helmets;
 (aa) retainers;
 (ab) drainage collection bowls;
 (ac) instrument trays;
 (ad) motorised universal supports;
 (ae) spine bridges;
 (af) iliac rolls;
 (ag) spine frames;
 (ah) head plates;
 (ai) shoulder segments;
 (aj) arthroscope positioning mechanism with OR without clamp;
 (ak) counter traction posts;
 (al) stainless steel mounting set anchor rods;
 (am) leg holders;
 (an) head rest retainers

OPERATING TABLES, SURGICAL

PARTS, SURGICAL OPERATING TABLE, being base support AND multi-
axial flexible positioning columns

STRETCHERS, MEDICAL, mobile, with OR without mattress

MONITOR STANDS, including BOTH of the following:
  (a) wheels;
  (b) cable holders,
with OR without a storage bin

OPERATING TABLES, ROBOTIC SURGERY, tilting, remote controlled, 
including BOTH of 
the following:
  (a) transfer board;
  (b) component cart

BEDS, PATIENT CARE, HOSPITAL, whether OR not assembled, 
including ALL of the following:
  (a) caregiver AND/OR patient control pendant;
  (b) siderails;
  (c) removable litter covers;
  (d) removable headboard AND footboard;
  (e) castors;
  (f) motors;
  (g) battery backup;
  (h) under bed light;
  (i) steer pedal,
with OR without one OR more of the following:
  (a) IV poles;
  (b) oxygen bottle holder;
  (c) foley bag basket;
  (d) lifting pole;
  (e) mattress;
  (f) x-ray translucent backrest AND cassette carrier;
  (g) siderail control panel;
  (h) bed extender

COTS AND/OR STRETCHERS, PATIENT TRANSPORT, whether OR not 
powered, whether OR not assembled, with OR without hydraulic 
unit AND/OR battery AND/OR sensors, including ALL of the 
following:
  (a) side rails;
  (b) release handles AND/OR levers AND/OR buttons;
  (c) collapsible legs;
  (d) wheels;
  (e) fasteners AND/OR restraints;
  (f) mattress

OPHTHALMIC EXAMINATION FURNITURE, electric, having ANY of the 
following:
  (a) adjustable patient chair;
  (b) sliding table tops with OR without foot brakes;
  (c) controls;
  (d) slit lamp arm

CHAIR, SHOWER AND/OR TOILET, having ANY of the following:
  (a) control panel;
  (b) electric OR manual operation;
  (c) adjustable height setting

STOOLS, SHOWER, having ALL of the following:
  (a) arm rests;
  (b) adjustable height;
  (c) non-slip feet

BEDS, BIRTHING

TABLES, OPHTHALMIC INSTRUMENTATION AND EXAMINATION, motorised 
elevation

STRETCHERS, RESCUE

TROLLEYS, SYRINGE DISPOSAL, being wheel mounted moulded 
transporting boxes

OPERATING TABLE AND TRANSPORTER SYSTEM, having ALL of the 
following:
  (a) operating surface incorporating multiple modular elements;
  (b) electronically controlled table column incorporating
      height and tilt adjustments;
  (c) transporter having a table top transfer selection or 
      change button

OPHTHALMIC WORKSTATIONS, including ALL of the following:
  (a) refractor;
  (b) table;
  (c) stand;
  (d) lamp

TROLLEYS, MEDICAL WORKSTATION, ENDOSCOPIC EQUIPMENT

COUCHES, MEDICAL EXAMINATION, having ALL the following:
  (a) length NOT less than 1 700 mm;
  (b) width NOT less than 500 mm;
  (c) epoxy powder coated frame

BEDS AND/OR CHAIRS, DEPENDENT CARE

BEDS, DISABLED, motorised, comprising ALL of the following:
  (a) height adjustment;
  (b) back panel lift;
  (c) knee brake panel tilt;
  (d) foot panel tilt

PARTS, BEDS, DISABLED, PORTABLE, being ANY of the 
following:
  (a) mattress supports and/or extensions;
  (b) bed ends;
  (c) support handles;
  (d) side rails;
  (e) lifting poles;
  (f) IV racks;
  (g) transport units;
  (h) 24 V electric motors

BEDS, DISABLED, PORTABLE, plc, comprising ALL of the following:
  (a) side rails;
  (b) IV racks;
  (c) lifting poles

TABLES, CHIROPRACTIC TREATMENT, portable, comprising ALL of the
 following:
    (a) neck drop;
    (b) mid-back drop;
    (c) lower back drop

BABY WALKERS/EXERCISERS, having ALL of the following:
   (a) collapsible frame;
   (b) seat and tray with 360 degree swivel action;
   (c) three position height adjustment;
   (d) a fixed and stable floor ring for movement control

BABY WALKERS AND/OR EXERCISERS, having 3 OR more of the 
following:
  (a) foldable frame;
  (b) height adjustable seat;
  (c) activity tray;
  (d) safety harness;
  (e) light AND/OR or sound emitting;
  (f) castors AND/OR wheels

DRAWER SLIDE SYSTEMS, self closing, with OR without front fixing
 brackets, consisting of ALL of the following:
   (a) two metal drawer sides;
   (b) cabinet drawer carcus profile;
   (c) railings

PARTS, DRAWER SLIDE SYSTEM, metal, including ALL of the 
following:
  (a) right AND left drawer side profiles;
  (b) right AND left full extension drawer slides;
  (c) front fixing hooks

PARTS, DRAWER AND/OR RUNNER, metal, being BOTH of the following:
  (a) side profiles; 
  (b) extendable slides,
with OR without ANY of the following.
          (i) hooks AND/OR brackets; 
         (ii) rails AND/OR brackets

PARTS, WORK STATIONS, MEDICAL, PORTABLE, having ANY of the 
following:
  (a) variable height base AND column with locking castors 
      45.7 cm x 35.6 cm slimline base, foot pedal height
      adjustment with integrated cable management;
  (b) flush tilt tablet mount;
  (c) padded monitor shifting handles;
  (d) folding keyboard bracket without keyboard plate;
  (e) flush mount with swivel-only front end;
  (f) rear column accessory track mounting adapter;
  (g) rear column dual grip handle;
  (h) single channel mount power supply holster with hook AND
      loop fastener;
  (i) 75 mm to 100 mm quick release display adapter plate;
  (j) variable height roll cart base with foot pedal height
      adjustment AND gas spring 51.3 cm x 51.3 cm base with
      integrated cable management;
  (k) slide-out keyboard tray with negative/positive tilt 
      52.8 cm x 20.3 cm;
  (l) tilt/swivel flush monitor mount;
  (m) 49.8 cm x 49.3 cm flush channel mount foldable tray with
      handle

SETS, DRAWER SIDE, including ALL of the following:
  (a) right AND left drawer sides profiles;  
  (b) connectors;  
  (c) fasteners, 
with OR without ANY of the following: 
          (i) stabilisers;
         (ii) cover caps;
        (iii) railings;
         (iv) railing sockets

COMPONENTS, SELF CLOSING DRAWER, comprising ALL of the following:
   (a) two metal drawersides, contoured with the centre and carcase
       (cabinet) profiles;
   (b) center profiles;
   (c) carcase (cabinet) profiles

DRAWER SLIDE SETS, metal, consisting of BOTH the following:
   (a) self closing, bottom fixing, drawer runners;
   (b) drawer sides, with integrated locking devices to allow drawer
       side to drawer runner connection

DRAWER SYSTEM, self closing, with or without front fixing brackets,
 consisting of BOTH the following:
   (a) two metal drawer sides, specifically shaped to operate in
       conjunction with carcase profiles;
   (b) carcase profiles

PARTS, TELESCOPIC TABLE, being table pedestal AND turntable

PARTS, DRAWER SLIDE SYSTEM, metal, being ALL of the following:
  (a) metal drawer sides;
  (b) self closing, full extension drawer runners;
  (c) back brackets;
  (d) front fixing brackets;
  (e) gallery rails;
  (f) gallery rail fixings

PARTS, DRAWER SLIDE SYSTEM, metal, being ALL of the following:
  (a) metal drawer sides;
  (b) self closing, full extension drawer runners;
  (c) back brackets;
  (d) front fixing brackets

DRAWER SLIDES, metal, with ball bearing slide mechanism, having a
 load capacity of 15 kg or less

PARTS, DRAWER SLIDE SYSTEM, being EITHER of the following:
   (a) metal drawer sides;
   (b) self closing drawer slides

DRAWER SLIDE SYSTEMS, self closing, with OR without front fixing
 brackets, consisting of ALL of the following:
   (a) two metal drawer sides;
   (b) cabinet drawer carcus profile;
   (c) railings

SETS, SLEEPING BAG, comprising BOTH of the following:
  (a) sleeping bag; 
  (b) pillow

SLEEPING BAGS

CUSHIONS, NOVELTY, shaped to resemble the face of a cartoon
 character but NOT including bears OR Australian native animals

CUSHIONS, AIR, being polyurethane coated nylon

CUSHIONS, needle-worked tapestry, consisting of a hand sewn
 tapestry face and a woven fabric back

COT LINERS, having BOTH of the following:
  (a) cotton outer layer;
  (b) polyester inner layer

HEAD AND NECK SUPPORTS, CHILD'S SAFETY, being semi-circular 
shaped neck pillows with attached head rest

BLANKETS, electric, quilted

LINERS, PRAM AND/OR STROLLER, cotton, with inner padding

BEDS, PET, including BOTH of the following:
  (a) textile cover;
  (b) polyester filling

PILLOWS, TRAVEL, NECK SUPPORT, tubular OR horseshoe shaped, 
having BOTH of the following:
  (a) nylon cover;
  (b) polystyrene filling

CUSHIONS, novelty, decorative

CUSHIONS, padded base, high back, incorporating lumbar support

PROTECTORS, MATTRESS, magnetic

BEDS, BABY'S TRAVEL, comprising ALL of the following:
  (a) mattresses;
  (b) carry straps;
  (c) textile fabric outer surface

OVERLAYS, pressure management

CUSHIONS, NURSING, wrap-around, with adjustable lumbar support

BEDS, PET, having BOTH of the following:
   (a) textile cover;
   (b) poly-fibre filling incorporating a flea repellent

BEDS, PET, having a fabric covered foam base

FITTINGS, LIGHT, CEILING FAN, non ceramic

DOWNLIGHTS, HALOGEN, dimmable, recessed, double insulated, non 
ceramic, having ALL of the following:
  (a) 12 volt integrated transformer;
  (b) lamp size NOT greater than 50 W;
  (c) rated closed abutted (CA) under the New Zealand Code of 
      Practice for the Installation of Recessed Luminaires and
      Auxiliary Equipment (NZECP54)

CRADLES, T5 ADAPTER FOR T8 FLUORESCENT TUBE HOUSING,  
electronically configured, but NOT including fluorescent tubes

DOWNLIGHTS, Light Emitting Diodes (LED), non-ceramic

LIGHTS, OPERATING THEATRE, CEILING MOUNTED, having a metal, 
plastic and/or glass housing

FIXTURES, CEILING LIGHT, non-ceramic, with OR without ANY of the 
following:
  (a) shades;
  (b) globes;
  (c) ceramic bulb-holder

DOWNLIGHTS, Light Emitting Diodes (LED), non-ceramic

DOWNLIGHTS, LIGHT EMITTING DIODE (LED), dimmable, non-
ceramic with OR without ceramic bulb holder, having BOTH of the 
following:
  (a) gimble kit having ALL of the following:
          (i) frame;
         (ii) downlight;
        (iii) transformer,  
  (b) flex AND plug

LIGHTS, FISH FARM, LED, submersible, non ceramic with OR without 
ceramic bulb holder

FANS WITH LED LIGHTS, CEILING, non-ceramic, incorporating an 
electric motor, with OR without a remote control

LED LIGHTS, OUTDOOR, non-ceramic, with OR without EITHER of the 
following:
  (a) ceramic OR plastic OR metal bulb holder;
  (b) movement AND light sensor

LED LIGHTS, CEILING AND/OR OUTDOOR, with OR without reflector 
accessory, having ALL of the following:
  (a) aluminium body;
  (b) mounting bracket;
  (c) transformer;
  (d) input power NOT less than 100 W and NOT greater than 200 W

LAMPS, LED, having ALL of the following:
  (a) power supply;
  (b) driver;
  (c) aluminium housing

LAMPS, LED TUBES, dimmable, having BOTH of the following:
  (a) voltage NOT greater than 50 V DC;
  (b) lengths of 1 130 mm OR 1 380 mm OR 1 800 mm OR 2 340 mm
      with tolerances of +/- 10%

LIGHTS, OPERATING THEATRE, CEILING MOUNTED, having a metal, 
plastic and/or glass housing

CRADLES, T5 ADAPTER FOR T8 FLUORESCENT TUBE HOUSING,  
electronically configured, but NOT including fluorescent tubes

DOWNLIGHTS, HALOGEN, dimmable, recessed, double insulated, non 
ceramic, having ALL of the following:
  (a) 12 volt integrated transformer;
  (b) lamp size NOT greater than 50 W;
  (c) rated closed abutted (CA) under the New Zealand Code of 
      Practice for the Installation of Recessed Luminaires and
      Auxiliary Equipment (NZECP54)

LIGHTS, CEILING, induction, non ceramic, with OR without ceramic 
bulb-holder, incorporating ALL of the following: 
  (a) lamp;
  (b) shade;
  (c) ballast

LIGHTS, CEILING, induction, non ceramic, with OR without ceramic 
bulb-holder, incorporating ALL of the following: 
  (a) lamp;
  (b) frame;
  (c) ballast

FANS AND LIGHTS, CEILING, integrated, non-ceramic with OR 
without ceramic bulb holder, having a self contained electric 
motor

LIGHT FITTINGS, WALL AND/OR CEILING, aluminium, 
NOT including light emitting diode light fittings, whether OR 
not assembled, non ceramic with OR without ceramic bulb-holder, 
including ALL of the following:
  (a) profiles;
  (b) arms;
  (c) beam;
  (d) ballast;
  (e) brackets;
  (f) end caps

FIXTURES, CEILING LIGHT, non-ceramic, with OR without ANY of the 
following:
  (a) shades;
  (b) globes;
  (c) ceramic bulb-holder

SPOTLIGHTS, WALL AND CEILING, non-ceramic, non-LED, with OR 
without ANY of the following:
  (a) shades;
  (b) globes;
  (c) ceramic bulb holder

FITTINGS, CEILING LIGHT, non-ceramic, non-LED, with OR without 
ANY of the following:
  (a) ceramic bulb holder;
  (a) shades;
  (b) globes

FITTINGS, WALL AND/OR CEILING LIGHTING, non-ceramic, non-LED, 
with OR without ANY of the following:
  (a) ceramic bulb holder; 
  (b) shades;
  (c) globes;
  (d) movement AND light sensors

LIGHTS, OUTDOOR, non-ceramic, non-LED, with OR without EITHER of 
the following:
  (a) ceramic OR plastic OR metal bulb holder; 
  (b) movement AND light sensor

SPOTLIGHTS, WALL AND CEILING, non-ceramic, non-LED, with OR 
without ANY of the following:
  (a) ceramic OR plastic OR metal bulb holder;
  (b) shades;
  (c) globes

FIXTURES, CEILING LIGHT, non-ceramic, non-LED, with OR without 
ANY of the following:
  (a) ceramic OR plastic OR metal bulb holder;
  (b) shades;
  (c) globes

FANS AND LIGHTS, CEILING, integrated, non-ceramic, non-LED,  
having self-contained electric motor, with OR without EITHER of 
the following:
  (a) ceramic OR plastic OR metal bulb holder;
  (b) remote controller

CHANDELIERS, crystal, having ALL of the following:
   (a) weight exceeding 5 kg;
   (b) arms and cups of lead crystal

FLUORESCENT LAMPS, 12", transistorised, single or double tube,
 12 VDC

FLUORESCENT LAMPS, 12 V, single or twin tube operation,
 incorporating magnetic attachment points and folding hook

LAMP BASES, non-ceramic, incorporating one OR more wireless 
chargers, with OR without one OR more of the following:
  (a) USB port;
  (b) USB adapter;
  (c) USB cable

LAMPS, non-ceramic, incorporating one OR more wireless chargers, 
with OR without one OR more of the following:
  (a) shades;
  (b) globes;
  (c) USB port;
  (d) USB adapter;
  (e) USB cable

LAMPS, TABLE, non-ceramic, incorporating wireless network 
technology speakers

LAMP BASES, non ceramic, with or without lamp shades

LAMPS, TABLE OR FLOOR, non ceramic, with or without EITHER of 
the following:
  (a) shades;
  (b) globes

LAMPS, FLOOR, non-ceramic, incorporating ANY of the following:
  (a) media player docking station;
  (b) remote control interface;
  (c) speakers

LAMPS, TABLE, non ceramic, incorporating a music player docking 
station with one or more speakers

FLOOR LAMPS, LED, with or without ANY of the following:
  (a) dimmable;
  (b) motion detector;
  (c) daylight control;
  (d) energy saving function

LAMPS, TABLE, with integrated wireless charging technology, AND 
universal serial bus port, AND universal serial bus cable, with 
OR without globes

LAMP BASES, TABLE, with integrated wireless charging technology, 
AND universal serial bus port, AND universal serial bus cable, 
with OR without EITHER of following:
(a) shades;
(b) globes

LAMP BASES, TABLE, with integrated wireless network technology 
AND speaker, with OR without either of the following:
  (a) shades;
  (b) globes

LAMPS, TABLE, LED, non-ceramic, with or without EITHER of the 
following:
  (a) shades;
  (b) globes

LAMPS, TABLE, non ceramic, incorporating a music player docking 
station with one or more speakers

LAMPS, FLOOR, non-ceramic, incorporating ANY of the following:
  (a) media player docking station;
  (b) remote control interface;
  (c) speakers

LAMPS, TABLE OR FLOOR, non ceramic, with or without EITHER of 
the following:
  (a) shades;
  (b) globes

LAMP BASES, non ceramic, with or without lamp shades

LAMPS, touch, but NOT including goods made of ceramic

LAMPS, table, 24% lead crystal, comprising a handcut glass shade

LAMPS, NOVELTY, being EITHER of the following:
   (a) chamber filled with liquid containing either confetti like
       chips or elliptical shaped tablets activated by a motor driven
       propeller in the lamp base;
   (b) ball filled with gas through which electricity passes,
       activated by sound or by touch;
 but NOT being goods of ceramic

LAMPS, TABLE, comprising ALL of the following:
   (a) bottle filled with a liquid which maintains its viscosity
       and a wax which moves when the lamp is turned on;
   (b) metal base with lamp holder and electrical connections

LIGHTS, OPERATING THEATRE, stand alone

SETS, CHRISTMAS LIGHTS, LED, white AND/OR multicoloured

CHRISTMAS LIGHT SETS, including replacement lamps

LIGHTS, FLOOD, non-ceramic with OR without ceramic bulb-holder 
OR metal halide lamp OR high pressure sodium lamp, having ALL of 
the following:
  (a) aluminium housing;
  (b) aluminium reflector;
  (c) mounting bracket;
  (d) toughened glass visor;
  (e) ethylene propylene diene monomer rubber seal;
  (f) NOT less than 1 000 W

FITTINGS, FLUORESCENT LIGHT, being enclosures

LIGHTS, coach, outdoor, non ceramic, with or without movement 
and light sensor

NIGHT LIGHTS, cordless, non-ceramic

STREETLIGHTS, Light Emitting Diode (LED)

SETS, GARDEN LIGHT, SOLAR POWERED, non ceramic, having ALL of 
the following:
  (a) lights;
  (b) control boxes;
  (c) electric cords;
  (d) batteries

LAMPS, WORK, HALOGEN, 240V, adjustable, incorporating a stand

LIGHTS, WORK, HAND HELD, consisting of glass AND/OR metal AND/OR 
plastic

LIGHTS, having ALL of the following:
  (a) variable beam width with built in control;
  (b) adjustable manual pan and tilt;
  (c) 16 mm or 28 mm mounting points

LIGHTS, having all of the following:
(a) variable beam width;
(b) adjustable manual pan and tilt; and
(c) 16mm or 28mm mounting points.

LAMPS, ARCHITECTURAL, having metal AND glass AND plastic 
components, comprising ALL of the following:
   a) optic colour systems;
   b) stepper motors

WORK LIGHTS, HALOGEN, 240 V, mounted on an adjustable steel
tripod

SETS, GARDEN LIGHT, SOLAR POWERED, non ceramic, having ALL of 
the following:
  (a) lights;
  (b) control boxes;
  (c) electric cords;
  (d) batteries

LIGHTS, STREET AND/OR PUBLIC SPACE, having ALL of the following:
  (a) LED lighting modules;
  (b) solar panels;
  (c) batteries;
  (d) network data log AND performance monitoring
with OR without motion sensors

LUMINAIRES, IN-GROUND, LED, dimmable, having ALL of the 
following:
  (a) output NOT less than 3 360 lumens  
  (b) immersion NOT greater than 3 m 
  (c) wall washer Lens system

LIGHTS, SOLAR POWERED LED, complying with Civil Aviation Safety 
Regulations 1998, Part 139 (Aerodromes) Manual of Standards 
(MOS), being ANY of the following:
  (a) approach;
  (b) edge;
  (c) obstruction;
  (d) taxiway;
  (e) threshold

OUTDOOR LIGHTING, non-ceramic, having ALL of the 
following:
  (a) luminous efficacy NOT less than 95 lm;
  (b) lifespan NOT less than 75 000 hours; 
  (c) power consumption NOT greater than 2 000 W;
  (d) voltage input NOT greater than 460 VAC;
  (e) over voltage NOT greater than 10 kV

LUMINAIRES, THEATRE AND/OR STAGE AND/OR STUDIO, LED, free 
standing OR mountable, whether OR not assembled, having an 
output NOT less than 2 000 lumens

FLOODLIGHTS, having ALL of the following:
  (a) output NOT less than 16 400 lm and NOT greater than 
      205 500 lm;
  (b) colour temperature including 3000 k AND/OR 4 000 K AND/OR
      5 700 K;
  (c) 0% upward light spill

LIGHTING TOWERS, portable, diesel engine AND/OR battery powered, 
having BOTH of the following:
  (a) hydraulic mast;
  (b) LED lights

ILLUMINATORS, LED flat dome, non-ceramic, continuous AND/OR 
strobe mode, with OR without camera lens centre hole

STREETLIGHTS, Light Emitting Diode (LED)

CHRISTMAS LIGHTS, LED, white AND/OR multicoloured, non ceramic

CHRISTMAS OR FESTIVE LIGHTS, LED, white and/or coloured, non-
ceramic

LAMPS, REPLICA TREE, light emitting diode, non-ceramic with OR 
without ceramic bulb holder

LIGHT TOWERS, trailer mounted, non ceramic with OR without 
ceramic bulb holder, having BOTH of the following:
  (a) retractable towers;
  (b) LED lights

LIGHTS, AQUARIUM, light emitting diode, external mount,       
non-ceramic with OR without ceramic bulb holder, having BOTH of 
the following:
  (a) sealed casing;
  (b) kelvin rating NOT less than 14 000 kelvins

LIGHTS, light emitting diode, having a power output NOT greater 
than 12 W, non-ceramic with OR without ceramic bulb
holder, being ANY of the following:
  (a) down lights;
  (b) spot lights;
  (c) circular lights having a diameter NOT greater than
      7.6 cm; 
  (d) square lights having a side measurement NOT greater
      than 10 cm;
  (e) rectangular lights having a width NOT greater than
      9 cm and length NOT greater than 22 cm

KITS, LIGHT, light emitting diode, having a power output NOT 
greater than 12 W, non-ceramic with OR without ceramic bulb 
holder, having ALL of the following:
  (a) light fittings;
  (b) transformers; 
  (c) supply cables,
being ANY of the following:  
    (i) down lights; 
   (ii) spot lights;
  (iii) circular lights having a diameter NOT greater than
        7.6 cm;  
   (iv) square lights having a side measurement NOT greater
        than 10 cm;
    (v) rectangular lights having a width NOT greater than 
        9 cm and length NOT greater than 22 cm

LIGHTS, LED, non ceramic with OR without ceramic
bulb-holder, having a universal serial bus (USB) cable

DOWNLIGHTS, CANOPY, LED, non ceramic with OR without 
ceramic bulb holder, with OR without power supply, having 
ALL of the following:
  (a) surface mounted;
  (b) ingress protection 68;
  (c) efficacy NOT less than 121 lm/W

OUTDOOR LIGHTING SYSTEM, non-ceramic, consisting of BOTH of the 
following:
  (a) pole;
  (b) LED light,
with OR without ANY of the following:
         (i) CCTV camera; 
        (ii) speaker; 
       (iii) wireless network signal transmitter;
        (iv) motion AND/OR light AND/OR temperature 
             AND/OR humidity AND/OR carbon monoxide 
             AND/OR air particle AND/OR solar radiation 
             AND/OR radar sensor; 
         (v) electrical power OR water outlet; 
        (vi) distress button; 
       (vii) light controller AND/OR dimmer;
      (viii) decorative lighting projector; 
        (ix) phone charging outlet

HEADLIGHTS, LED, LOCOMOTIVE, complying with international rail 
standard EN50121-3-2:2016, having ALL of the following:
  (a) NOT greater than 200 000 candela at centre;
  (b) NOT greater than 3 000 candela at 7.5 degrees from centre;
  (c) NOT greater than 400 candela at 20 degrees from centre;
  (d) dimmable;
  (e) nominal input voltage NOT less than 75 volts direct 
      current (VDC)

LAMPS, LED, water cooled, non-ceramic, including BOTH of the 
following:
  (a) power supply;
  (b) aluminium housing,
with OR without EITHER of the following:
          (i) ceramic bulb-holder;
         (ii) driver

LAMPS, ARCHITECTURAL, having metal AND glass AND plastic 
components, comprising ALL of the following:
   a) optic colour systems;
   b) stepper motors

LIGHTS, having all of the following:
(a) variable beam width;
(b) adjustable manual pan and tilt; and
(c) 16mm or 28mm mounting points.

LIGHTS, having ALL of the following:
  (a) variable beam width with built in control;
  (b) adjustable manual pan and tilt;
  (c) 16 mm or 28 mm mounting points

LIGHTS, WORK, HAND HELD, consisting of glass AND/OR metal AND/OR 
plastic

LAMPS, WORK, HALOGEN, 240V, adjustable, incorporating a stand

NIGHT LIGHTS, cordless, non-ceramic

LIGHTS, coach, outdoor, non ceramic, with or without movement 
and light sensor

FITTINGS, FLUORESCENT LIGHT, being enclosures

LIGHTING SYSTEM, telescopic, tilt, non ceramic, having BOTH of 
the following:
  (a) pneumatic mast;
  (b) manual OR remote controlled

LANTERNS, battery operated, having nylon fabric cover, with OR 
without ceramic bulb holder

LIGHT TOWERS, trailer mounted, non ceramic, having BOTH of the 
following:
  (a) retractable tower;
  (b) metal halide lamps

WORK LIGHTS, 240 V, non-ceramic with OR without ceramic     
bulb holder

LAMPS, HORTICULTURAL, high pressure sodium, non ceramic with OR 
without ceramic bulb holder, having ALL of the following:
  (a) double ended bulb;
  (b) electronic starter;
  (c) power rating NOT less than 600 W and NOT greater than 
      1 000 W

LIGHTS, FLOOD AND/OR STREET AND/OR OPEN SPACE, induction, non 
ceramic, with OR without ceramic bulb-holder, ground AND/OR wall 
AND/OR pole mounted, incorporating ALL of the following:
  (a) lamp;
  (b) ballast;
  (c) shade

LIGHTS, AQUARIUM, non-ceramic with OR without ceramic bulb 
holder, with integrated controller AND timer, with OR without 
stand

LUMINAIRES, THEATRE AND/OR STAGE AND/OR STUDIO, non-
ceramic with OR without ceramic bulb holder, mountable, whether 
OR not assembled, having an output NOT less than 2 000 lumens

LAMPS, electroluminescent, DC AND/OR AC, fiberglass 
encapsulated, having sensors

LAMPS, dental

LAMPS, inspection, fibre optic, comprised of an illuminator unit
 and flexible light guides

FITTINGS, light, optical fibre, operating theatre

HEADS, lighting, cinematographic, having a weight (excluding
 cable) NOT exceeding 0.85 kg

LIGHTS, cinematographic or video, indirect lighting, using a
 shielded light source to direct light onto a foldable aluminised
 fabric reflector

SEARCHLIGHTS, remote controlled, whether or not incorporating
 switching for morse signalling

ILLUMINATOR, infra-red, with a built in filter to minimise
 radiation of visible light

SEARCHLIGHTS, having a reflector dia exceeding 180 mm, but NOT
 including spotlights with a reflector dia of 240 mm or less

LIGHTING EQUIPMENT, television studio, utilising sustained RGB
 luminescence, fixed and portable with accessories including studio
 mounting brackets, lighting grid clamps and lighting pattern control
 screens

CONTROLLED EXPOSURE ILLUMINATORS, producing parallel, uniform
 intensity beams of light in UV, visible and IR regions of the
 optical spectrum. Based on Xenon, Mercury, Xenon/Mercury arc lamps
 and incorporating optical integrators and beam collimating lenses

LIGHTING EQUIPMENT, special effects discotheque type, being EITHER
 of the following:
   (a) 240 V metal motorized units;
   (b) 240 V non-motorized units
 but NOT including goods made of ceramic

ROPE LIGHT, 240V, being a series of .455 watt globes at 25mm
 intervals encased within a solid, flexible polyvinyl chloride
 moulding

LAMPS, HORTICULTURAL PLANT GROWING, being 400 watts to 600 watts
 high pressure sodium

LIGHT SYSTEM, moving, being one or more light configurations
 permanently mounted within a range of NOT less than 70 000 lux but
 NOT exceeding 220 000 lux, whether or not incorporating an
 examination light

BEZELS, being EITHER of the following:
   (a) 12 V AC/DC with 11 mm globe mounting hole;
   (b) 240 V AC with 7 mm globe mounting hole

LIGHTS, ROPE, encased within a flexible plastic moulding

LAMPS, non-electric, not being made of ceramic, excluding gas lamps

CANDLE HOLDERS, glass, imported with or without metal stand

CANDLE HOLDERS, other than ceramic, steel, silver-plated OR gold
 plated

CANDLE HOLDERS, wooden

CANDLE HOLDERS, base metal, but NOT including those that are silver
 plated OR gold plated

CANDLE HOLDERS, brass

LAMPS, kerosene OR liquid petroleum gas, OR a combination of both

OIL LAMPS, glass

OIL LAMPS, having both of the following:
  (a) fibreglass wick;
  (b) snuffer cap

KEYRINGS, titled, solar powered

KEYRINGS, titled, solar powered

HEAT FILTERS, operating theatre light

FILTERS OR LENSES, airport runway light

LAMP BASES, glass

PARTS FOR KEROSENE LAMPS, being ANY of the following:
   (a) glass shades;
   (b) glass bowls

PARTS, LIGHTING FIXTURES, non-ceramic, being ANY of the 
following:
  (a) shades;
  (b) panels;
  (c) trimmings

PARTS, lighting fixtures, non-ceramic, being ANY of the 
following:
  (a) shades;
  (b) panels;
  (c) trimmings

LAMP BASES, brass

LAMPSHADES, rice paper

PARTS, FLUORESCENT LAMP FITTING, non ceramic, being lamp 
mounting rails

PARTS, LIGHTING FIXTURES, non-ceramic, being ANY of the 
following:
  (a) shades;
  (b) panels;
  (c) trimmings

OBSERVATORY, wooden, including BOTH of the following:  
  (a) sliding roof;  
  (b) motor

PREFABRICATED BUILDINGS, radio frequency (RF) electromagnetic 
radiation shielded, including ALL of the following:
  (a) steel frame container;
  (b) cast steel building corners; 
  (c) expandable sidewalls; 
  (d) thermally insulated panels; 
  (e) air conditioners; 
  (f) roof access steps AND harness connection points

GREY WATER REUSE SYSTEMS, containerised, having ALL of the 
following:
 (a) sensors;
 (b) pumps;
 (c) tanks;
 (d) microfiltration membranes;
 (e) toilet systems;
 (f) tap systems;
 (g) UV filter

HIGH PRESSURE VESSEL STORAGE UNITS, including ALL of the 
following:
  (a) piping spools;
  (b) LED lighting;
  (c) pressure switches;
  (d) manual release buttons;
  (e) pressure relief valves

POOL ENCLOSURES, retractable

CONTROL ENCLOSURES, including ALL of the following:
  (a) control module; 
  (b) generator control panel; 
  (c) motor control centre; 
  (d) safety instrumentation panel; 
  (e) battery charger cabinet;
  (f) HVAC units

DECONTAMINATION UNITS, containerised, including ALL of the 
following:
  (a) 2 - chamber material lock;
  (b) waste water filter unit;
  (c) control unit;
  (d) negative pressure unit

DECONTAMINATION UNITS, containerised, including ALL of the 
following:
  (a) 2 chamber material lock waste water filter unit;
  (b) 5 chamber personal airlock with shower chambers;
  (c) water treatment water heater unit;
  (d) control unit;
  (e) negative pressure unit

WORKSHOP CONTAINERS, including ALL of the following:
  (a) jib crane;
  (b) chain hoist;
  (c) cabinets;
  (d) tool racks;
  (e) shelving;
  (f) lighting;
  (g) electrical connections

CONTAINERISED SHOWERS, greywater, having ALL of the following:
  (a) sensors;
  (b) pumps;
  (c) shower;
  (d) tap;
  (e) ventilation AND insulation;
  (f) tanks;
  (g) software;
  (h) membrane bioreactor

POD MEETING ROOMS, unassembled, open AND/OR closed style, 
having ALL of the following:
  (a) width NOT less than 100 cm and NOT greater than 263 cm;
  (b) depth NOT less than 90 cm and NOT greater than 290 cm;
  (c) height NOT less than 210 cm and NOT greater than 230 cm;
  (d) LED ceiling lights;
  (e) power module AND/OR inlet;
with OR without ANY of the following:
  (f) carpeted floor;
  (g) ventilation fan;
  (h) acoustic OR sound control laminated glass;
  (i) acoustic felt OR fabric internal walls,
  (j) external lighting;
  (k) access ramps;
  (l) fire sprinklers AND/OR warning signals; 
  (m) fittings, including ANY of the following:
          (i) tables OR desks; 
         (ii) seating;
        (iii) monitor screens;
         (iv) socket outlets; 
          (v) work stations

OBSERVATORY DOMES, TELESCOPE, hemispherical, unassembled, having 
ALL of the following:  
  (a) wind speed rating NOT greater than 250 km/h closed;  
  (b) track mounted wheels;  
  (c) 360 degree rotation;  
  (d) dome base diameter NOT less than 5.8 m;  
  (e) height NOT less than 3.7 m;  
  (f) geared motor

TAILGAS ANALYSER UNITS, prefabricated, insulated, including six 
OR more of the following:
  (a) door with OR without window;
  (b) air conditioning;
  (c) 3-phase power AND lighting;
  (d) gas analysers;
  (e) gas flow indicators;
  (f) pressure indicators;
  (g) flow AND pressure controllers;
  (h) temperature controllers;
  (i) scrubbers;
  (j) filters;
  (k) pressure valves;
  (l) electrical controls AND UPS;
  (m) sampling equipment;
  (n) gas detectors;
  (o) control units;
  (p) signalling alarm;
  (q) signal transmitter AND receiver

ENCLOSURES, DOUGH PROOFERS OR BLAST FREEZER, insulated, 
unassembled, having ALL of the following:
  (a) insulated polyisocyanurate wall AND ceiling panels having
      ALL of the following:
           (i) thickness NOT less than 150 mm;
          (ii) stainless steel internal cover;
         (iii) galvanized steel external cover,
  (b) insulated doors;
  (c) assembled size NOT less than 13 m x 7 m x 4.5 m;
  (d) thermal conductivity coefficient of w/m k 0.025;
  (e) galvanised steel panels covered with stainless steel
      basin;
  (f) light switch,
with OR without hot galvanised floor beams

MEDICAL PROCEDURE AND RECOVERY SUITES, PREFABRICATED, including 
ALL of the following:
  (a) hydraulic cylinders AND/OR rams;
  (b) frame AND/OR chassis having BOTH of the following:
         (i) two OR more rooms;
        (ii) earth bonding in compliance with Australian/New 
             Zealand Standard  (AS/NZS) 3003:2018,
  (c) self-levelling footings AND/OR threaded feet;
  (d) air filters conforming to filter class ISO 50U AND/OR 55U 
      tested in accordance with International Standard (ISO) 
      29463-1:2017(E); 
  (e) uninterrupted power supply;
  (f) water locker AND/OR water treatment device;
  (g) medical gas bank AND/OR gas bottle platform

ENCLOSURES, DOUGH COOLING AND RESTING, insulated, unassembled, 
having ALL of the following: 
  (a) insulated polyisocyanurate panels having ALL of the
      following: 
          (i) thickness NOT less than 80 mm; 
         (ii) stainless steel internal cover;
        (iii) steel external cover having a polyurethane
              coating, 
  (b) infeed AND outfeed openings;
  (c) insulated doors;
  (d) assembled size NOT less than 22 m x 3 m x 4 m

COOL ROOMS AND/OR BUILDINGS, unassembled, including ALL of the 
following:
  (a) sandwich panels having polyisocyanurate AND/OR isophenic
      foam interiors AND/OR cores;
  (b) coated steel skins AND/OR exteriors;
  (c) self-supporting walls AND/OR ceiling spans;
  (d) wall AND/OR ceiling AND/OR roof panels;
  (e) hinged AND/OR roll-up AND/OR sectional lifting doors;
  (f) corner profiles;
  (g) ceiling hangers;
  (h) sealant,
with OR without freezing AND/OR cooling units

VAULTS, modular, including ALL of the following: 
  (a) panels having ALL of the following:
         (i) high density composite concrete mix;
        (ii) reinforced rods AND steel fibres;
       (iii) galvanised frame,
  (b) stainless steel AND concrete door;
  (c) combination lock mechanism

PREFABRICATED BUILDINGS, being ANY of the following: 
  (a) laundries;
  (b) showers;
  (c) toilets;
  (d) kitchens;
  (e) refrigeration;
  (f) scullery;
  (g) bakery,
including ALL of the following:
        (i) forklift panels;
       (ii) steel channels;
      (iii) connection box;
       (iv) access panels;
        (v) retractable wheels;
       (vi) manual hydraulic pump;
      (vii) tying AND lashing points;
     (viii) removable stabilizing legs;
       (ix) folding walkway;
        (x) handrails;
       (xi) burner unit;
      (xii) ISO blocks;
       (xi) generator

CABINS, ONSHORE AND/OR OFFSHORE STIMULATION UNIT, OIL AND/OR GAS 
WELL, skid mounted, including ALL of the following:
  (a) air conditioning;
  (b) pre-installed monitors;
  (c) pre-installed central processing units;
  (d) pre-installed cables

PREFABRICATED BUILDINGS, containerised, insulated, including two 
OR more of the following:
  (a) doors with OR without porthole;
  (b) air conditioning;
  (c) 3-phase power AND lighting;
  (d) drawers;
  (e) worktops with matting AND strap buttons;
  (f) power bar:
  (g) cabinet;
  (h) shelving;
  (i) workstations;
  (j) monitor wall mountings;
  (k) antenna mounting plates;
  (l) tie down points;
  (m) wall dividers

INTERPRETER BOOTHS, prefabricated, complying with International 
Standard ISO 4043:2016, including ALL of the following:
  (a) occupant capacity NOT greater than 8;
  (b) interchangeable wall panels;
  (c) table;
  (d) ventilation unit;
  (e) fan;
  (f) LED lighting;
  (g) cable passaging;
  (g) allen key

PREFABRICATED BUILDINGS, electromagnetic radiation shielded, 
unassembled, including ALL of the following:
  (a) shielding panels AND door;
  (b) support structure;
  (c) moisture barrier PE foil;
  (d) air ventilation honeycomb;
  (e) lighting;
  (f) microwave absorber foam;
  (g) camera AND smoke alarm

ENCLOSURES, SHREDDER PLANT, acoustic attenuation and splinter 
protection, including ALL of the following:  
  (a) splinter protection walls and/or roof panels; 
  (b) steel framework;
 with or without control cabins AND/OR iron sorting cabins

FREEZER AND/OR COOL ROOMS, modular, having high-density 
polyurethane panels, without freezing OR cooling units

POULTRY SHEDS, skid mounted, unassembled, with OR without 
flooring AND/OR flooring frames, having ALL of the following:
  (a) curtains AND supports;
  (b) gutters;
  (c) roofing;
  (d) doors AND/OR gates;
  (e) wall panels AND/OR profiles;
  (f) pipes

PREFABRICATED BUILDINGS, portable, steel, having a blast load 
capacity NOT greater than 1 000 mbar over pressure for 22 
milliseconds

ENCLOSURES, PAINT SPRAYING AND SANDING AND POLISHING, mobile, 
including ALL of the following:
  (a) air recycling machine;
  (b) lights;
  (c) air filters

BUILDINGS, OIL AND GAS EXPLORATION, prefabricated, having ALL of 
the following:
  (a) vices;
  (b) work benches;
  (c) cupboards

CONTROL ENCLOSURES, steel, prefabricated, including ALL of the 
following:
  (a) electrical fittings being ALL of the following:
         (i) lighting and wall socket outlets, 
        (ii) fuse box AND fuses;
       (iii) wiring,
  (b) distribution box;
  (c) cable ladders;
  (d) earth grid copper wires;
  (e) lifting points;
  (f) frames;
  (g) flooring;
  (h) cable trays;
  (i) Heating AND Ventilating AND Air-conditioning (HVAC)
      units

COLD ROOMS, PREFABRICATED, assembled OR unassembled, including  
ALL of the following:
  (a) polyurethane panels;
  (b) steel and copper pipes;
  (c) cooling system;
  (d) expansion valves;
  (e) humidifiers;
  (f) control system;
  (g) lighting;
  (h) air curtains

PREFABRICATED CABINS, OFFSHORE, having ALL of the following:
  (a) air conditioners;
  (b) double glazed windows;
  (c) fixed ladders;
  (d) paint not less than 190 microns thick

GENERATOR ENCLOSURES, POWER STATION, acoustic, including ALL of 
the following:
  (a) wall panels;
  (b) roof panels;
  (c) steel framework;
  (d) air ducts

RADOMES

CARPORTS, PORTABLE, comprising ALL of the following:
  (a) canopies;                                     
  (b) steel frames;                                 
  (c) steel joiners

CLEANROOMS, PREFABRICATED, comprising ANY four of the following:
  (a) double glazed laminated safety glass windows;
  (b) flame retardant sandwich panels;             
  (c) recessed light fittings;                     
  (d) aluminium door frames;                       
  (e) electromagnetic door locks

OPERATING THEATRE ROOMS, modular

GREENHOUSE, computerised, creating controlled artificial environment
 for the growing of plants