Tariff Concession Orders

FIBRES, optical, visible light transmission, having BOTH of the
 following:
   (a) a concentric double-layer structure consisting of a core of
       highly transparent polymethyl methacrylate polymer and a
       thin layer of fluorine polymer cladding;
   (b) fibre diameter of 100 microns or greater but NOT exceeding
       2 500 microns,
 but NOT including fibre with glass components or made up as cable

FIBRES, optical, multi-mode (but NOT including fibre made up as
 cable), having ALL of the following:
   (a) glass dia of 122 microns m or greater but NOT exceeding
       128 microns m;
   (b) core dia exceeding 55 microns m

CABLE, FIBRE OPTIC, being EITHER:
   (a) single mode, glass diameter NOT less than 124 micron and NOT
       exceeding 126 micron, having a PVC buffer material and a
       buffer diameter of 900 micron +/- 50 micron;
   (b) single mode, having ALL of the following characteristics:
           (i) glass diameter NOT less than 124 micron and NOT
               exceeding 126 micron;
          (ii) cable diameter NOT less than 1.85 mm and NOT exceeding
               3.10 mm;
         (iii) flammability rating of OFNR(UL) and OFN FT -4 (CSA)
               when tested to UL 1666 and C22.2 No. 232-M1988 (CSA)

FIBRES, OPTICAL, single mode, wavelength 1 300 nm OR greater,
 conforming to ITU-T-G.652

FIBRES, OPTICAL, multi-mode (but NOT including fibre made up as
 cable), having BOTH of the following:
   (a) glass diameter of 122 micrometres OR greater but NOT exceeding
       128 micrometres;
   (b) core diameter exceeding 45 micrometres

LENSES, contact, hydrophilic, incorporating an artificial iris

LENSES, CONTACT, DISPOSABLE, having a replacement modality NOT 
greater than one month

LENSES, SPECTACLES, uncut finished, single vision stock, resin 
OR plastic, having ALL of the following:
  (a) convex AND concave optical surfaces;
  (b) refractive power;
  (c) spherical OR aspheric front surface curvature;
  (d) circular having a diameter NOT less than 55 mm and NOT
      greater than 80 mm, 
with OR without coatings OR treatments, NOT including optical 
ground lenses

LENSES, SPECTACLE, ultraviolet photo chromatic activated, 
plastic

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts which are
 30 years old or more
   For the purposes of TC 8533525 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

LENSES OR REFLECTORS, motorcycle

LENS BLANKS, spectacle, semi-finished, resin OR plastic

FRAMES, SPECTACLE

FRAMES, SPECTACLE

PARTS, SPECTACLE FRAME, being ANY of the following:
   (a) bridges;
   (b) hinges, metal, whether or not attached to shaped wires;
   (c) lugs, without hinges attached;
   (d) nose pad arms;
   (e) plastic nose pads;
   (f) plastic temple tips (or ends);
   (g) plates (or double rivets), for fastening spectacle frame
       wires to hinges;
   (h) rim locks;
   (i) top bar mountings;
   (j) wires, shaped, cut to size

PARTS, PROTECTIVE EYEWEAR, WRAP AROUND SAFETY GLASSES MANUFACTURED
 TO AS 1337, being ANY of the following:
   (a) hinges;
   (b) top, bottom or cross bars;
   (c) fronts;
   (d) bridges;
   (e) lugs, with or without hinges;
   (f) temple tips or temple ends

PARTS, SUNGLASS SPECTACLE FRAMES, being ANY of the following:
   (a) bridges;
   (b) hinges, whether or not attached to shaped wires;
   (c) lugs, whether or not attached to hinges;
   (d) nose pad arms;
   (e) nose pads;
   (f) temple tips (or ends);
   (g) plates (or double rivets);
   (h) rim locks;
   (i) bars, top OR bottom;
   (j) bar mountings;
   (k) arms;
   (l) wires, shaped, cut to size

PARTS OF SWIMMING GOGGLES, being ANY of the following:
   (a) headbands, straps, rubber;
   (b) buckles, but NOT including buckles for general use;
   (c) nose pieces;
   (d) nose tube strings;
   (e) plastic seals;
   (f) replacement sets and switch kits comprising combinations of
       the above parts

PARTS OF SUNGLASS SPECTACLE FRAMES, consisting of ANY of the
 following:
   (a) polycarbonate;
   (b) polycarbonate/nylon;
   (c) nickel silver;
   (d) titanium

SUNGLASSES

GLASSES, polarizing for 3D stereographic cinema film viewing

SPECTACLES, holographic

SPECTACLES, anaglyph

GOGGLES AND SPECTACLES, safety laser, but NOT including
 ultraviolet types

GOGGLES, industrial, dual lens, non-mist

GOGGLES, motorcycle or ski, NOT being industrial safety goggles
 or sunglasses

PROTECTIVE EYEWEAR, WRAP AROUND SAFETY GLASSES, having ALL of the
 following features:
   (a) manufactured to AS 1337;
   (b) polycarbonate lenses, but NOT including optically worked
       lenses;
   (c) plastic frames

PARTS, PROTECTIVE EYEWEAR, WRAP AROUND SAFETY GLASSES MANUFACTURED
 TO AS 1337, being polycarbonate lenses

MAGNIFIER EYE GLASSES, non-prescription

PROTECTIVE EYEWEAR, safety glasses, wrap around, manufactured to
 AS 1337, having BOTH of the following:
   (a) clear polycarbonate lenses;
   (b) plastic/nylon frame

GOGGLES, swimming

SAFETY GLASSES, including ALL of the following:
  (a) lenses;
  (b) metal AND/OR plastic frames;
  (c) side shields
with OR without ANY of the following:         
          (i) temple tips OR temple ends;
         (ii) nose pad arms;
        (iii) nose pads;
         (iv) top OR bottom bars

SNOW GOGGLES, with OR without ANY of following
  (a) additional interchangeable lens;
  (b) lens cloth;
  (c) microfibre bag; 
  (d) face mask;
  (e) protective case

GLASSES, 3D, TELEVISION SCREEN VIEWING

GOGGLES, SNOW

PARTS, PROTECTIVE EYEWEAR, being tear off lens covers

PROTECTIVE EYEWARE, being safety goggles, complying with 
Australian/New Zealand Standard 1337:1992 (AS/NZS 1337:1992)

EYEWEAR, PROTECTIVE, intense pulsed light, liquid crystal darkening
 filter

PROTECTIVE EYEWEAR, being safety glasses, manufactured to AS 1337

PARTS AND ACCESSORIES, FILM PROCESSOR, being ANY of the following:
   (a)  antistatic brushes;
   (b)  arms;
   (c)  bellows;
   (d)  belts;
   (e)  caps;
   (f)  carriers;
   (g)  collars;
   (h)  contact print assemblies, comprising paper mask base, contact
        print mask base plate AND panorama/contact print stocker;
   (i)  covers;
   (j)  cropping print assemblies, comprising cropping negative
        carrier AND manual negative carrier base;
   (k)  crossover racks;
   (l)  detectors;
   (m)  displays;
   (n)  drier boxes;
   (o)  ducts;
   (p)  feed rollers;
   (q)  film cleaners;
   (r)  forks;
   (s)  frames;
   (t)  greeting card processors;
   (u)  grommets;
   (v)  guides;
   (w)  handles;
   (x)  hangers;
   (y)  hooks;
   (z)  keyboards;
   (aa) leaders;
   (ab) lids;
   (ac) light shields;
   (ad) magazines;
   (ae) manual negative carriers;
   (af) mounts;
   (ag) panorama print assemblies, comprising negative carrier base,
        negative carrier mask AND panorama/contact print stocker;
   (ah) plates;
   (ai) pressure rollers;
   (aj) pricers;
   (ak) printed ciruit boards;
   (al) racks;
   (am) radiators;
   (an) rings;
   (ao) rods;
   (ap) rollers;
   (aq) shafts;
   (ar) shock absorbing rubbers;
   (as) solenoids;
   (at) splicers;
   (au) straps;
   (av) supports;
   (aw) tanks;
   (ax) trays

PARTS, PRINTER PROCESSOR, being ANY of the following:
    (a) arms;
    (b) belts;
    (c) black shutters;
    (d) bodies;
    (e) cases;
    (f) chambers;
    (g) collars;
    (h) control strip cases;
    (i) covers;
    (j) cropping masks;
    (k) cross over racks;
    (l) cushions;
    (m) cutters;
    (n) dampers;
    (o) detectors;
    (p) diffusers;
    (q) dryers;
    (r) dryer racks;
    (s) ducts;
    (t) fixed lens guides;
    (u) fixed racks;
    (v) focus boards;
    (w) frames;
    (x) grommets;
    (y) guards;
    (z) guides;
   (aa) holders;
   (ab) hooks;
   (ac) idlers;
   (ad) ink ribbon cassettes;
   (ae) interfaces;
   (af) inverters;
   (ag) keyboards;
   (ah) knobs;
   (ai) labels;
   (aj) liquid crystal displays;
   (ak) colour liquid crystal displays;
   (al) lens decks;
   (am) levers;
   (an) louvres;
   (ao) masks;
   (ap) mats;
   (aq) mirror boxes;
   (ar) mounts;
   (as) mounting plates;
   (at) mounting stands;
   (au) negative carriers;
   (av) negative masks;
   (aw) negative receiver caps;
   (ax) paper magazines;
   (ay) paper magazine bodies;
   (az) paper magazine spools;
   (ba) partitioners;
   (bb) photo-interrupters;
   (bc) photometry mirrors;
   (bd) pins;
   (be) plates;
   (bf) print heads;
   (bg) printed circuit boards;
   (bh) processor racks;
   (bi) receiver stands;
   (bj) rollers;
   (bk) rubber feet;
   (bl) seats;
   (bm) shields;
   (bn) shutters;
   (bo) solenoids;
   (bp) sorters;
   (bq) stays;
   (br) straps;
   (bs) supports;
   (bt) tanks;
   (bu) vacuum transporters

MATHS SETS, polystyrene, comprising ALL of the following:
   (a) protractor;
   (b) 45 degree set square;
   (c) 60 degree set square

STENCILS, DRAFTING, STUDENT, DRAWING GEOMETRICAL SHAPES

SET SQUARES, being polystyrene plastic drawing instruments

PROTRACTORS, steel, being ANY of the following:
   (a) universal bevel;
   (b) incorporating a depth gauge;
   (c) protractor heads for combination squares, combination sets
       OR bevel protractors

DRAWING INSTRUMENTS, being ANY of the following:
   (a) set squares, NOT being student type;
   (b) flexible curve rules;
   (c) lettering guides

DRAWING INSTRUMENTS, being EITHER of the following:
  (a) set squares;
  (b) protractors

RULES, SCALE, transparent acrylic, precision graduated, having
 lengths of 300 mm to 500 mm (inclusive), manufactured in accordance
 with AS1212-1981 and with Japanese Industrial Standard B9512

RULES, PRECISION SCALE, engraved, acrylonitrile-butadiene-styrene,
 flat OR oval OR triangular

TAPES, LOGGERS", steel, fitted with an end spike OR clawhook

RULES, PRECISION SCALE, engraved, polyvinyl chloride, flat OR
 oval OR triangular, 150 mm OR 300 mm lengths

TAPES, steel, calibrated, length NOT less than 50 m

TAPES, steel, periphery, calibrated to measure diameters of
 cylindrical objects

RULES, graduated, wood or plastic

PARTS FOR VEHICLES, being reproductions of goods fitted as
 original equipment to vehicles having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

GAUGES, fuel or other gauges for measuring or checking the flow
 or level of liquids, being reproductions of goods fitted as
 original equipment to vehicles having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more
   For the purposes of TC 8732484 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

GAUGES, pressure, electrical, being reproductions of goods fitted
 as original equipment to vehicles having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS FOR VEHICLES, being reproductions of goods fitted as
 original equipment to vehicles having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

WATER METERS, having ALL of the following:
  (a) pipe diameter NOT greater than 300 mm;
  (b) operating pressure NOT greater than 16 bar;
  (c) flow rate NOT greater than 1 400 cubic metres
      per hour

WATER METERS, TURBINE, nominal size DN being ANY of the 
following:
  (a) 40;
  (b) 50;
  (c) 65;
  (d) 80;
  (e) 100;
  (f) 150

WATER METERS, TURBINE AND/OR HELIX, nominal size DN greater than 
100

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts which
 are 30 years old or more
   For the purposes of TC 8732487 it is the importer"s
   responsibility to establish that the parts were manufactured
     30 years or more prior to the date of importation

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts which
 are 30 years old or more
   For the purposes of TC 8732488 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

SPEED INDICATORS AND TACHOMETERS (excluding dwell tachometers),
 being 30 years old or more and being parts for vehicles which,
 if imported, would fall within Chapter 87 of the Customs Tariff
 Act 1987
   For the purposes of TC 8732427 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

SPEED INDICATORS AND TACHOMETERS (excluding dwell tachometers)
 being reproductions of goods fitted as original equipment to
 vehicles having BOTH of the following:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1956

STROBOSCOPES, portable, white light, capable of direct reading
 exceeding 40 000 r/min

PARTS FOR VEHICLES, being reproductions of goods fitted as
 original equipment to vehicles having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

TEST BENCHES, COMMON RAIL DIESEL FUEL INJECTOR

WHEEL SPEED SENSOR ASSEMBLIES, PASSENGER MOTOR VEHICLE, 
consisting of BOTH of the following: 
  (a) wheel speed sensor, whether OR not inductive;
  (b) electric cable fitted with connectors AND/OR terminals  
      AND/OR grommets

SENSORS, WHEEL SPEED, whether or not inductive

PARTS, LPG CONVERSION KIT, being EITHER of the following;
  (a) rail of injectors;
  (b) injector rail nozzles

THROTTLE CONTROLS, electronic, comprising ALL of the following:
   (a) accelerator pedal position sensor;
   (b) ratio metric voltage signaller;
   (c) noise canceller and balancer

SENSORS, WHEEL SPEED, INDUCTIVE