Tariff Concession Orders

FRONT-END LOADERS, articulated, 4 wheel drive, having ALL of the 
following:
  (a) roll-over protection structure;
  (b) seatbelts;
  (c) maximum operating weight exceeding 590 kg

ROBOTS, MULTI-SERVICE, PUBLIC SPACE, mobile, battery powered, 
laser-guided, programmable logic controlled, having a carrying 
capacity NOT greater than 500 kg, with OR without one OR both of 
the following:
  (a) docking station;
  (b) batteries

TRACTORS, AIRCRAFT, towbarless, electric motor driven

YARD TRACTORS, electric, having ALL of the following:
  (a) AC motor rating having NOT less than 45 kW;
  (b) towing capacity NOT less than 35 tonne;
  (c) fifth wheel load capacity NOT greater than 15 tonne; 
  (d) battery pack AND charger

TRACTORS, AIRCRAFT TOWBARLESS PUSHBACK, having an electric 
engine NOT less than 96 V

AIRCRAFT TRACTORS, tow bar less, having ALL of the following:
  (a) orbital hydrostatic steering system;
  (b) forward AND reverse gearbox;
  (c) nose wheel cradle lifting capacity NOT less than 11   
      tonnes;
  (d) turning circle radius NOT less than 9 600 mm over body;
  (e) adjustable locking gate front wheel diameters NOT less 
      than 300 mm;
  (f) full hydraulic braking systems;
  (g) aircraft oversteer warning protection system;
  (h) swivelling seat AND control column;
  (i) cabin hydraulic AND/OR spring suspension system

TRACTORS, AIRCRAFT PUSHBACK AND TOWING, engine power NOT less 
than 75 kW AND not greater than 130 kW

TRACTORS, AIRCRAFT TOWING, towbar less, having an engine power 
NOT less than 88 kW but NOT exceeding 90 kW

TERMINAL TRACTORS, diesel, having ALL the following:             
  (a) 2 OR 4 wheel drive;  
  (b) single person cabin;  
  (c) fifth wheel boom lift capacity NOT less than 25 000 kg;  
  (d) fixed rear axle

YARD TRACTORS, diesel, having ALL of the following:
  (a) maximum engine power NOT less than 220 kW;
  (b) maximum torque NOT less than 1,500 Nm;
  (c) fifth wheel load capacity NOT less than 36 000 kg

TRACTORS, electric, being EITHER of the following:
  (a) yard tractors, having ALL of the following:
        (i) AC motor rating NOT less than 180 kW;
       (ii) towing capacity NOT less than 70 tonne;
      (iii) fifth wheel load capacity NOT less than 35 tonne,
  (b) airport refuelling tractors, having ALL of the following:
        (i) AC motor rating NOT less than 180 kW;
       (ii) towing capacity NOT less than 80 tonne

TRACTORS, SHUNTING, including BOTH of the following:
  (a) tyres AND rail flanged wheels;
  (b) remote control

VEHICLES, AIRCRAFT TOWING, having an engine power exceeding 
130 kW

LOG SKIDDER, diesel engine, self-propelled, articulated chassis, 
4 OR 6 wheel drive, having BOTH of the following:
  (a) single OR dual function arch AND grapple;
  (b) front mounted blade

TRACTOR CAB CHASSIS, OFF-ROAD, including BOTH of the following:
  (a) NOT less than 8 wheels;
  (b) front AND rear drive axles

TRACTORS, TOW BAR LESS, having ALL of the following:
  (a) programmable logic controlled two wheel drive OR four 
      wheel drive mode;
  (b) four speed forward AND four speed reverse gearbox;
  (c) fully enclosed, fully suspended, forward control sound
      insulated cab;
  (d) swivelling seat AND column control console;
  (e) hydraulically operated docking cradle;
  (f) adjustable locking gate for wheel diameters NOT less than
      850 mm and NOT greater than 1 400 mm;
  (g) cradle lifting capacity NOT exceeding 48 tonnes;
  (h) CCTV cradle monitoring system;
  (i) programmable logic control for cradle functions, driveline
      AND vehicle controls;
  (j) electronically controlled, power assisted, selectable four
      steering modes, being:
         (i) 2 wheel front steering;
        (ii) 2 wheel rear steering;
       (iii) 4 wheel coordinated steering;
        (iv) crab steering,
  (k) turning circle radius NOT less than 9 900 mm ºover body»

PERSONNEL VEHICLES, UNDERGROUND, diesel engine, carrying 
capacity NOT greater than 25 passengers

BUSES, having ALL of the following:
  (a) gross vehicle weight greater than 3.5 t;
  (b) front mounted engine;
  (c) 4 x 2 wheel drive;
  (d) seating capacity (including driver) NOT greater than 21

BUSES, having ALL of the following:
  (a) front mounted engine;
  (b) 4 x 2 wheel drive;
  (c) gross vehicle weight NOT less than 6.0 tonne and NOT
      greater then 6.5 tonne;
  (d) seating capacity NOT greater than 25;
  (e) vehicle width excluding mirrors NOT greater then 2.10 m

TRANSPORTERS, electric, having ALL the following:
  (a) passenger capacity NOT greater than 20 persons;
  (b) maximum speed loaded on 0 % slope 18 km/h;
  (c) weight NOT less than 11 tonnes;
  (d) length NOT less than 11 metres

BUSES, bi-articulated, electric having ALL of the following:
  (a) pantograph roof assemblies;
  (b) 600 kW recharge capability;
  (c) lithium titanate-oxide batteries;
  (d) NOT less than 24 metres in length;
  (e) 12 wheels

VEHICLES, snowscooter, motorised, propelled on ONE OR MORE tracks,
 steered by ONE OR TWO skis

GOLF CARS, motorised, having ALL of the following:
  (a) petrol OR electric engines; 
  (b) rack and pinion steering;
  (c) seating capacity NOT less than 2 persons and NOT greater
      than 6 persons

VEHICLES, ALL TERRAIN, single-seater, dry weight NOT greater than
520 kg

VEHICLES, FOUR WHEEL, ALL TERRAIN, having ALL of the following:
   (a) tube chassis;
   (b) motor cycle saddle;
   (c) steering handle bars;
   (d) cylinder capacity NOT greater than 1 000 cc

VEHICLES, FOUR WHEEL, ALL TERRAIN, having ALL of the following:
   (a) tube chassis;
   (b) motor cycle saddle;
   (c) steering handle bars;
   (d) cylinder capacity NOT greater than 150 cc

PASSENGER MOTOR VEHICLES, petrol, having a gross vehicle weight 
(GVW) NOT less than 3 500 Kg, including ALL of the following:
  (a) 4 x 4 drive;
  (b) eight speed transmission;
  (c) dual cabin;
  (d) solid beam axles;
  (e) engine capacity NOT less than 2 900 cc;
  (f) cargo space

RACING CARS, single seat, open wheel, but NOT including cars
 suitable for use in ANY of the categories listed in Table "A", as
 defined by the Confederation of Australian Motor Sports (CAMS)
                              TABLE "A"
   (a) Formula Brabham, except for vehicles which are constructed
       from other than carbon fibre composite materials;
   (b) Formula Ford;
   (c) Formula Vee;
   (d) Speedway racing;
   (e) Drag racing;
   (f) Offroad racing; or
   (g) Go Kart racing;

RACING CARS, NASCAR, left hand drive, single seat, fitted with
 roll bars

MOTOR CYCLES, FOUR WHEEL DRIVE, all terrain vehicle, diesel powered

PASSENGER MOTOR VEHICLES, GROSS VEHICLE WEIGHT NOT LESS THAN 
3 500 KG, constant four-wheel drive, including ALL of the 
following:
  (a) automatic eight speed transmission;
  (b) five seats;
  (c) all-terrain capability;
  (d) engine capacity NOT less than 2 900 cc

PASSENGER MOTOR VEHICLES, having a gross vehicle weight (GVW) 
NOT less than 3 500 Kg, including ALL of the following:
  (a) 4 x 4 drive;
  (b) eight speed transmission;
  (c) dual cabin;
  (d) solid beam axles;
  (e) engine capacity NOT less than 2 900 cc;
  (f) cargo space

PASSENGER MOTOR VEHICLE, having a gross vehicle weight (GVW) NOT 
less than 3 500 kg, including ALL of the following
  (a) 4 x 4 drive;
  (b) eight speed transmission;
  (c) five OR more passenger seats;
  (d) solid beam axles;
  (e) engine capacity NOT less than 2 900 cc

BOATS, AMPHIBIOUS, having BOTH of the following:
  (a) gross vehicle weight NOT less than 3 500 kg;
  (b) retractable wheels incorporating wheel track belts

GO-KARTS, single seat, electric, 4 wheel, with OR without 
batteries, including BOTH of the following:
  (a) NOT less than 1.5 kW motor;
  (b) charging port

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, spark OR compression
 ignition, having ALL of the following:
   (a) 6 * 6 drive;
   (b) limited slip differential front axle;
   (c) differential lock rear axle;
   (d) maximum speed greater than 20 km/h;
   (e) ground clearance 450 mm OR greater;
   (f) payload capacity of 22.5 t OR greater
 but NOT including underground mining trucks

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, spark OR compression
 ignition, having ALL of the following:
   (a) 4 * 4 OR 6 * 4 OR 6 * 6 drive;
   (b) inter-axle differential lock;
   (c) payload capacity of 22.5 t OR greater;
   (d) maximum speed greater than 20 km/h;
   (e) ground clearance 450 mm OR greater
 but NOT including underground mining trucks

TRUCKS, REAR DUMP, OFF HIGHWAY, rigid frame, 4x2 drive, capacity
 exceeding 31 t, but NOT including underground mining trucks

TRUCKS, REAR DUMP, OFF-HIGHWAY, rigid frame, 4 X 2 drive, flywheel
 power exceeding 330 kW, capacity exceeding 31 t, but NOT including
 underground mining trucks

QUARRY TRUCKS, OFF-HIGHWAY, RIGID FRAME, rear dump, 4x2 drive,
 flywheel power exceeding 330 kW, capacity exceeding 39.5t

TRUCKS, off-highway, rear dump, diesel engine, having ALL of the 
following:
  (a) dual view swivel seat;
  (b) hydrostatic all-wheel drive;
  (c) travel speed NOT greater than 25 km/h;
  (d) payload NOT greater than 12.5 tonnes;
  (e) front tip skip

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, including ALL of 
the following:
  (a) 6 x 6 drive;
  (b) inter-axle differential lock;
  (c) load capacity NOT greater than 25 tonnes;
  (d) driving speed NOT greater than 60 km/h

TRUCKS, OFF HIGHWAY, rear dump, rigid frame, payload capacity 
exceeding 3l t, with OR without ANY of the following:
  (a) tyres;
  (b) rims;
  (c) trays

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, having ALL of the 
following:
  (a) 6 x 6 drive;
  (b) driving speed NOT greater than 50 km/h;
  (c) load capacity NOT greater than 22 000 kg;
  (d) ground clearance height NOT greater than 480 mm;
  (e) engine power capacity NOT greater than 231 kW

TIPPER TRUCKS, OFF HIGHWAY, 10 x 10 wheel drive, rigid chassis, 
diesel powered, having a gross vehicle weight (GVW)
exceeding 58 tonnes, having ALL of the following:
  (a) differential lock on all axles;
  (b) disengageable drive front axle;
  (c) independent suspension with swinging half axles;
  (d) single rear axle steering;
  (e) planetary type drive axles

DUMP TRUCKS, OFF-HIGHWAY, having ALL the following:
  (a) rigid frame;
  (b) four wheel drive hydrostatic transmission;
  (c) four wheel steering;
  (d) enclosed air-conditioned cabin;
  (e) load capacity NOT greater than 12 000 Kgs;
  (f) driving speed NOT greater than 40 km/h

TRUCKS, REAR DUMP, ARTICULATED, OFF HIGHWAY, having a maximum 
load carrying capacity greater than 41 000 kg

TRUCKS, REAR DUMP, OFF-HIGHWAY, articulated, having ALL of the 
following:
  (a) 6 x 6 OR 6 x 4 drive;
  (b) payload capacity NOT less than 24 t;
  (c) dog clutch differential lock;
  (d) compression ignition engine

DUMPERS, front mounted bucket, having ALL of the following:
  (a) articulated chassis;
  (b) permanent 4WD;
  (c) integrated braking systems;
  (d) load capacity NOT greater than 7 000 kg

DUMPERS, OFF-ROAD, rubber tracked, with OR without tray, having 
ALL of the following:
  (a) maximum payload capacity NOT less than 2 500 kg and NOT 
      greater than 16 000 kg;
  (b) hydrostatic transmission;
  (c) skid steer;
  (d) height NOT less than 1 620 mm and NOT greater than 
      3 360 mm;
  (e) maximum speed NOT greater than 15 km/h

DUMPERS, OFF-HIGHWAY, having ALL of the following:
  (a) articulated chassis;
  (b) gross vehicle weight greater than 3.5 tonnes;
  (c) front tipping skip;
  (d) four wheel drive;
  (e) load capacity NOT greater than 10 000 kg

TRUCKS, REAR AND SIDE DUMP, gross vehicle weight greater than 
7 t, having ALL of the following:
  (a) articulated chassis;
  (b) load capacity NOT less than 10 000 kg;
  (c) ground clearance NOT less than 400 mm;
  (d) cabin

DUMPERS, walk behind or ride on, having BOTH of the following:
  (a) track laying;
  (b) load capacity NOT less than 1 000 kg

DUMPERS, walk behind or stand on, having ALL of the following:
  (a) track laying;
  (b) machine width NOT greater than 880 mm;
  (c) high tipping bucket with a bucket hinge point NOT less 
      than 1440 mm from the ground or a fixed tipping bucket

DUMPERS, TRACK LAYING, hydrostatic drive, ride on, having ALL of 
the following: 
  (a) diesel powered engine;
  (b) 180 degree swivel with a 90 degree angle;
  (c) load capacity NOT greater than 1 000 kg

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, having ALL of the 
following:
  (a) payload capacity NOT greater than 21 tonne;
  (b) 4 x 4 drive;
  (c) diesel powered;
  (d) height NOT greater than 2.6 metres

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, having ALL of the 
following:
  (a) 4 x 4 drive;
  (b) spiral bevel differential;
  (c) payload capacity of NOT less than 50 tonnes;
  (d) speed NOT greater than 40km/h

TRUCKS, REAR DUMP, ARTICULATED, OFF HIGHWAY, having ALL of the
 following:
   (a) drives, 4x2/4x4 selectable, AND/OR 4x4, AND/OR 6x6;
   (b) limited slip differentials all axles;
   (c) payload capacity NOT less than 13 tonne

TRUCKS, REAR DUMP, ARTICULATED, OFF-HIGHWAY, spark OR compression
 ignition, having ALL of the following:
   (a) 6 x 6 drive;
   (b) limited slip differential front axle;
   (c) differential lock rear axle;
   (d) maximum speed greater than 20 km/h;
   (e) payload capacity of 22.5 t OR greater
 but NOT including underground mining trucks

MOTOR VEHICLES, all terrain, having a gross vehicle weight (GVW) 
NOT less than 3 500 kg, including ALL of the following:
  (a) 4 x 4 drive;
  (b) eight speed transmission;
  (c) two passenger seats;
  (d) engine capacity NOT less than 2 900 cc

VANS, REFRIGERATED TRANSPORTATION, having ALL of the following:
  (a) temperature selection;      
  (b) gross vehicle weight NOT less than 3 500 kg and NOT
      greater than 5 000 kg;
  (c) diesel engine

UTILITY TERRAIN VEHICLES, off-road, including ALL of the 
following:
  (a) dry weight NOT greater than 1 500 kg;
  (b) side by side seating; 
  (c) NOT less than four wheels;
  (d) steering wheel;
  (e) liquid cooled engine having BOTH of the following:
         (i) NOT greater than four cylinders;
        (ii) cylinder capacity NOT greater than 1 500 cc

TRUCKS, OFF-ROAD TIPPING, 4 X 4 wheel drive, having ALL of the 
following:
  (a) multi-directional tipping tray;
  (b) compression ignition engine;
  (c) gross vehicle weight NOT less than 1.3 t and NOT greater
      than 2.5 t,
with OR without a hydraulic scissor lifter

TRUCKS, COMPRESSION IGNITION ENGINE, single AND/OR dual cab-
chassis, having a gross vehicle weight exceeding 
3.5 tonne but NOT exceeding 5 tonne

TRUCKS, COMPRESSION IGNITION ENGINE, 4 x 4 wheel drive, having a 
gross vehicle weight exceeding 3.5 tonne but NOT exceeding 5 
tonne

TRUCKS, COMPRESSION IGNITION ENGINE, 4 x 2 wheel drive, gross 
vehicle weight exceeding 3.5 t but NOT greater than 5 t, single 
OR dual cab, being ANY of the following:
  (a) pick up;
  (b) dump truck;
  (c) cab-chassis

TRUCKS, COMPRESSION IGNITION ENGINE, 4 x 2 wheel drive, gross 
vehicle weight exceeding 3.5 t but NOT greater than 5 t, single 
OR dual cab, being ANY of the following:
  (a) pick up;
  (b) dump truck;
  (c) cab-chassis

TRUCKS, gross vehicle weight greater than 3.5 t, being ANY of the
following:                                                       
  (a) crane;                                                     
  (b) tray back;                                                 
  (c) tilt tray;                                                 
  (d) tipper

VANS, diesel engine, gross vehicle weight greater than 3.5 t

VANS, COMPRESSION IGNITION, gross vehicle weight exceeding 3.5 t but
 NOT exceeding 5.0 t

TRUCKS, PICK UP OR DUMP OR CAB OR CHASSIS, single OR dual cab,
 compression ignition engine, 4 x 4 wheel drive, gross vehicle
 weight exceeding 3.5 t but NOT exceeding 4.2 t

TRUCKS, COMPRESSION IGNITION ENGINE, having ALL of the following:
   (a) 4X2 wheel drive;
   (b) gross vehicle weight NOT less than 8 t but NOT exceeding 12 t;
   (c) single OR dual cab chassis

TRUCKS, compression ignition engine, 4 x 2 wheel drive, gross
 vehicle weight exceeding 7.5 T but NOT exceeding 8 T, single or
 dual cab, being ANY of the following:
   (a) dump truck;
   (b) cab or chassis

VEHICLE CAB-CHASSIS, DRIVEABLE, off highway, 4 X 4 drive, rigid,
 having a gross vehicle weight (GVW) exceeding 12 tonnes, having ALL
 of the following:
   (a) differential lock rear axle;
   (b) differential lock and 2 reduction ratios housed in the
       transfer case;
   (c) planetary type, front and rear drive axles
 For the purposes of the order "gross vehicle weight" (GVW) means the
 road weight specified by the manufacturer as being the maximum
 design weight capacity of the complete vehicle.  This weight is the
 combined weight of the vehicle, the maximum specified load, the
 driver and a tank of fuel.

LOG FORWARDERS, having ALL of the following:
  (a)  diesel engine having power output NOT less than 
       130 kW;
  (b)  hydraulic loader;
  (c)  weight NOT less than 15 tonne;
  (d)  load capacity exceeding 11 tonne

VANS AND/OR TRUCKS, REFRIGERATED TRANSPORTATION, having ALL of 
the following:
  (a) temperature selection;
  (b) gross vehicle weight NOT less than 5 000 kg and NOT
      greater than 20 000 kg;
  (c) compression-ignition internal combustion piston engine

TRUCKS, rigid, diesel engine, 4 X 2 wheel drive, having a gross 
vehicle weight NOT less than 12 t and NOT greater than 15 t

VANS, diesel engine, having a gross vehicle weight exceeding 5 t 
but NOT exceeding 20 t

UTILITY VEHICLES, tracked, having a load carrying capacity NOT 
greater than 11 340 kg

TRUCKS, FLAT BED TRAY, having ALL the following:
  (a) compression ignition engine;
  (b) four wheel drive;
  (c) cooling rig above chassis;
  (d) gross vehicle weight exceeding 17.9 t but NOT 
      exceeding 20 t

VANS, diesel engine, having a gross vehicle weight exceeding 
6.5 tonne but NOT exceeding 20 tonne

TRUCKS, CAB CHASSIS, compression ignition engine, single OR duel 
cab, having BOTH of the following:
  (a) 4 x 4 wheel drive;
  (b) gross vehicle weight exceeding 5 t but NOT greater than 
      7 t

TRUCKS, compression ignition engine, cab-chassis, having a gross 
vehicle weight NOT less than 17 t and NOT greater than 18 t

TRUCKS, CAB CHASSIS, having ALL of the following:
  (a) compression ignition engine;
  (b) 4x4 wheel drive;
  (c) gross vehicle weight NOT less than 15 tonne but NOT
      greater than 20 tonne;
  (d) single or dual cab

CHASSIS, TRUCK, COMPRESSION IGNITION ENGINE, having BOTH of the 
following:
  (a) 4 x 2 wheel drive;
  (b) gross vehicle weight NOT less than 18 tonnes and NOT 
      greater than 20 tonnes

LORRIES, HAVING SELF-LOADING CRANE

TRUCKS, COMPRESSION IGNITION ENGINE, CAB CHASSIS, having BOTH of 
the following:
  (a) 4 x 2 wheel drives;
  (b) gross vehicle weight NOT less than 15 t and NOT greater 
      than 17 t

CHASSIS, TRUCK, COMPRESSION IGNITION ENGINE, having BOTH of the 
following:
  (a) 4x2 wheel drive;
  (b) gross vehicle weight NOT less than 12 tonnes and NOT
      greater than 16 tonnes;

TRUCKS, CAB CHASSIS, compression ignition engine, 4x4 wheel 
drive, gross vehicle weight greater than 9 tonne but NOT greater 
than 15 tonne, single or dual cab

TRUCKS, SINGLE AND/OR DUAL CAB, 4x2 wheel drive, gross vehicle 
weight NOT greater than 6.5 t

TRUCKS, PICK UP AND/OR DUMP AND/OR CAB AND/OR CHASSIS, having 
ALL of the following:
  (a) single AND/OR dual cab;
  (b) compression ignition engine;
  (c) 4x4 wheel drive;
  (d) gross vehicle weight NOT greater than 6 t

TRUCKS, COMPRESSION IGNITION ENGINE, 4 x 2 wheel drive, gross
 vehicle weight exceeding 5 t but NOT exceeding 7.5 t, single or dual
 cab being ANY of the following:
   (a) pick up;
   (b) dump truck;
   (c) cab  AND/OR chassis

VEHICLES, log forwarding

VEHICLE CAB CHASSIS, OFF HIGHWAY, 8 x 8 drive, driveable, rigid,
 having a gross vehicle weight (GVW) exceeding 20 tonnes, having ALL
 of the following:
   (a) differential lock rear axle;
   (b) power divider lockout front axle;
   (c) planetary type, front and rear drive axles
 For the purpose of the order GROSS VEHICLE WEIGHT (GVW) means the
 road weight specified by the manufacturer as being the maximum
 design weight capacity of the complete vehicle.  This weight is
 the combined weight of the vehicle, the maximum specified load, the
 driver and a tank of fuel

VEHICLES, EQUIPMENT AND MATERIAL TRANSPORT, diesel engine, frame 
mounted, exceeding 20 t, including ALL of the following:
  (a) chassis having more than one bogie;
  (b) driver cabin AND folding driver cabin;
  (c) engine compartment;
  (d) segment supports;
  (e) powered axles;
  (f) lock twists;
  (g) electrical circuits;
  (h) hydraulics

TRACKED CARRIER VEHICLES, diesel, driver operated, including ALL 
of the following:
  (a) load capacity NOT greater than 11 000 kg;
  (b) speed NOT greater than 14 km/h;
  (c) laden traversing gradient NOT greater than 29 degrees;
  (d) six suspension rollers per side;
  (e) length NOT greater than 6 800 mm;
  (f) height NOT greater than 3 200 mm

TRUCKS, CAB CHASSIS, rigid frame, 8x8 all wheel drive, including 
ALL of the following:
  (a) gross vehicle mass (GVM) NOT less than 40 tonnes;
  (b) 16 speed transmission; 
  (c) anti-lock braking system

CAB CHASSIS TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 
32 000 KG, off road, articulated,  having ALL of the following:
  (a) turbo diesel inter-cooled engine;
  (b) 4x4 OR 6x6 wheel drive;
  (c) maximum forward speed exceeding 45 km/h;
  (d) maximum reverse speed exceeding 25 km/h

TRUCKS, CAB-CHASSIS, including ALL of the following:
  (a) diesel engine;
  (b) gross vehicle weight NOT less than 60 tonnes;
  (c) vehicle width NOT less than 2.9 metres;
  (d) NOT less than four axles;
  (e) one OR more steered AND driven axle

CAB-CHASSIS, OFF HIGHWAY, 10 x 10 wheel drive, rigid, having a 
gross vehicle weight exceeding 28 tonnes, including ALL of the 
following:
  (a) compression ignition engine;
  (b) cooling rig mounted above chassis;
  (c) steerable tag axle;
  (d) differential lock all axles;
  (e) disengageable drive front axles

TRUCKS, CAB CHASSIS, compression ignition engine, single OR dual 
cab, having BOTH of the following:
  (a) 4 x 4 wheel drive;
  (b) gross vehicle weight NOT less than 20 tonnes and NOT 
      greater than 22 tonnes

TRUCKS, FLAT BED TRAY, incorporating a crane, having ALL the 
following:
  (a) compression ignition engine;
  (b) four wheel drive;
  (c) cooling rig mounted above chassis;
  (d) gross vehicle weight NOT exceeding 21 t

TRUCKS, CAB-CHASSIS, OFF HIGHWAY, 10 x 10 wheel drive, rigid 
chassis, diesel powered, having a gross vehicle weight (GVW) 
greater than 45 tonnes, including ALL of the following: 
  (a) differential lock all axles;
  (b) disengageable drive front axle;
  (c) independent suspension with swinging half axles

TRUCKS, INTEGRATED LOAD HANDLING,  having ALL of the 
following:
  (a) compression ignition engine;
  (b) 8x8 wheel drive;
  (c) gross vehicle weight exceeding 20 t but NOT exceeding 44 t;
  (d) container handling unit AND/OR hook lift system;
  (e) approach angle greater than 33 deg;
  (f) departure angle greater than 30 deg;
  (g) ramp over angle greater than 27 deg;
  (h) fording depth NOT less than 1 200 mm

TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 50 T, 
compression ignition engine, cab chassis, 8x8 wheel drive

TRUCKS, CAB-CHASSIS, compression ignition engine, having BOTH of 
the following:
  (a) 6 X 2 wheel drive;
  (b) gross vehicle weight NOT less than 24 tonnes and NOT 
      greater than 28 tonnes

CHASSIS, TRUCK, COMPRESSION IGNITION ENGINE, having BOTH of the 
following:
  (a) 6 x 2 wheel drive;
  (b) gross vehicle weight NOT less than 20 tonnes and NOT  
      greater than 24 tonnes

VEHICLE CAB CHASSIS, DRIVEABLE, OFF HIGHWAY, 6 x 6 drive, rigid,
 gross vehicle weight (GVW) exceeding 26 tonnes, having BOTH of
 the following:
   (a) differential lock rear axle, with power divider;
   (b) differential lock housed in the transfer case

MOTOR VEHICLES, CAB CHASSIS, having a gross vehicle weight (GVW) 
NOT less than 3 500 kg, including ALL of the following:   
  (a) 4 x 4 drive;
  (b) eight speed transmission;
  (c) seating capacity NOT greater than five persons;  
  (d) solid beam axles;
  (e) engine capacity NOT less than 2 900 cc;
  (f) chassis bed

MOTOR VEHICLE, having a gross vehicle weight (GVW) NOT less than 
3 500 kg, including ALL of the following:
  (a) 4x 4 drive;
  (b) eight speed transmission;
  (c) seat capacity NOT greater than two persons;
  (d) all terrain;
  (e) engine capacity NOT less than 2 900 cc

UTILITY TERRAIN VEHICLES, off-road, including ALL of the
following:
  (a) dry weight NOT greater than 1 500 kg;
  (b) side by side seating;
  (c) NOT less than four wheels;
  (d) steering wheel;
  (e) four stroke engine having ALL of the following:
           (i) NOT greater than four cylinders;
          (ii) cylinder capacity NOT greater than 1 500 cc;
         (iii) air cooled

UTILITY TERRAIN VEHICLES, off-road, including ALL of the 
following:
  (a) dry weight NOT greater than 1 500 kg;
  (b) side by side seating; 
  (c) NOT less than four wheels;
  (d) steering wheel;
  (e) four stroke engine having ALL of the following:
          (i) NOT greater than four cylinders;
         (ii) cylinder capacity NOT greater than 1 500 cc;
        (iii) liquid cooling

VEHICLES, OFF ROAD, ALL TERRAIN, four wheel drive, including ALL 
of the following:
  (a) engine power NOT less than 28 kW and NOT greater than 
      68 kW;
  (b) dry weight NOT greater than 900 kg;
  (c) side by side seating; 
  (d) single OR twin OR triple cylinder, liquid cooled, four 
      stroke engine, NOT greater than 1 000 cc capacity

MOTOR VEHICLES, VAN, electric, gross vehicle weight NOT less 
than 4 250 kg, having BOTH of the following:
  (a) battery capacity NOT less than 68 kWh;
  (b) motor torque NOT less than 430 Nm

MOTOR VEHICLES, VAN, electric, gross vehicle weight NOT less 
than 4 250 kg, having BOTH of the following:
  (a) battery capacity NOT less than 81 kWh;
  (b) maximum motor torque NOT less than 400 Nm

COAL AND ORE SHUTTLE CARS, self-propelled, carrying capacity NOT 
greater than 20 tonnes

MOTOR VEHICLES, cab chassis, electric, gross vehicle weight NOT 
less than 3 500 kg, having BOTH of the following:
  (a) chassis payload NOT less than 1 600 kg; 
  (b) maximum motor torque NOT less than 380 Nm

DUMPERS, pedestrian operated, electric powered, having a 
load capacity NOT greater than 1 000 kg

UTILITY VEHICLES, off road, all terrain, four-wheel drive, 
electric powered, including BOTH of the following:
  (a) dry weight NOT greater than 1 500 kg;
  (b) side by side seating

ELECTRIC TRUCKS, having a gross vehicle weight NOT less than 3.5 
tonnes and NOT greater than 7.5 tonnes, assembled, including ALL 
the following:
  (a) electric driveline;
  (b) NOT less than six 13.5 kWh li-ion batteries;
  (c) 4 x 2 configuration;
  (d) electronic stability program;
  (e) lane departure warning system;
  (f) emergency braking system with pedestrian detection unit;
  (g) multi leaf front suspension with stabiliser bar AND double
      acting shock absorbers;
  (h) power assisted integral ball AND nut steering

CRANE, MOBILE, having ALL of the following:
   (a) a lifting capacity of 35 000 kg or greater at 3 m radius
       from centre line of rotation;
   (b) telescopic extendable boom greater than 23.5 m, mounted on a
       360 degree slew ring

CRANES, MOBILE, having a maximum working load NOT less than
 35 000 kg at 3 m working radius

CRANES, mobile, having BOTH the following:
   (a) telescopic extendable boom designed to slew 360 degree on a
       slew ring;
   (b) maximum safe working load, as defined in AS 1418.5-1990, NOT
       less than 25 000 kg at 3 m working radius and minimum boom
       length

CRANE, carrier mounted, having ALL of the following:
   (a) telescopic extendable boom of 32 m or more;
   (b) capable of slewing 360 degrees on a slew ring;
   (c) lifting capacity calculated in accordance with AS 1418
       Part 5 of 35 tonne or greater at 3 m radius from centre line
       of rotation

CRANES, MOBILE, lattice boom, having ALL of the following;
  (a) lifting capacity NOT greater than 800 tonnes at 9 metre 
      radius;
  (b) hoist height NOT greater than 205 metres;
  (c) radius NOT greater than 160 metres

CRANES, MOBILE, LATTICE BOOM, having ALL of the following:
  (a) lifting capacity NOT greater than 750 000 kg at 7 m radius;
  (b) hoist height NOT greater than 193 m;
  (c) radius NOT greater than 136 m

CRANES, MOBILE, including ALL of the following:
  (a) rotating slew rings;
  (b) telescopic extendable booms; 
  (c) NOT less than four wheels;
  (d) NOT less than four extendable outrigger legs;
  (e) lifting capacity NOT greater than 33 tonnes

DRILLING RIGS, truck mounted, self-propelled, including ALL of 
the following:
  (a) front outriggers lifting capacity NOT greater 27 tonnes;
  (b) rear outriggers lifting capacity NOT greater than 36 
      tonnes;
  (c) tilting rotary head with side parking position;
  (d) foldable crown block lifting capacity NOT greater than 40 
      tonnes;
  (e) hydraulic main winch;
  (f) hammer oiler unit;
  (g) swivel arm mounted hydraulic controls;
  (h) triplex pump;
  (i) hydraulic driven air compressor;
  (j) diesel engine;
  (k) drill pipe double clamping unit;
  (l) hydraulic generator AND/OR welder unit;
  (m) pull-up capacity NOT greater than 380 kN

FIRE TRUCKS, 6 x 4 crew cab, including ALL of the following:
  (a) turntable mounted articulated telescopic boom;
  (b) cage floor height NOT less than 21 m;
  (c) platform water outlet capacity NOT less than 
      3 500 L/min;
  (d) cage weight capacity NOT less than 350 kg;
  (e) NOT less than 4 hydraulic outriggers

PLATFORM VEHICLES, AERIAL FIRE AND RESCUE, with OR without foam 
tanks, including ALL of the following:
  (a) turntable mounted hydraulic articulated telescopic boom;
  (b) cage;
  (c) cage floor height NOT less than 30 m;
  (d) 6 X 4 OR 8 X 4 wheel chassis configuration;
  (e) jacking system NOT less than 5.93 m wide;
  (f) roller shutters AND/OR flaps;
  (g) cage control panel

FIRE AND RESCUE AERIAL PLATFORM VEHICLES, including ALL of the 
following:
  (a) hydraulic articulated telescopic boom being turntable 
      mounted;
  (b) cage floor height NOT less than 42 m;
  (c) platform water outlet capacity NOT less than 3 800 l/min;
  (d) 8 x 4 wheel chassis;
  (e) stabilising system consisting of 4 hydraulic outriggers

FIRE AND RESCUE VEHICLES, incorporating an hydraulic telescopic 
ladder with work platform having a vertical reach NOT greater 
than 32 m

VEHICLES, AIRCRAFT RESCUE AND FIRE FIGHTING, having ALL of the 
following:
  (a) water tank capacity NOT less than 5 000 litres;
  (b) foam tank capacity NOT less than 1 000 litres;
  (c) gross vehicle weight NOT less than 20 000 kgs

TRUCKS, CONCRETE MIXER, four wheel drive, having agitator drum 
capacity NOT less than 5.5 cubic metres and NOT greater than 7.1 
cubic metres

TRUCKS, CONCRETE-MIXER, having ALL of the following:
 (a) self loading shovel;
 (b) all terrain capability;
 (c) drum capacity NOT exceeding 5000 litres

PLATFORMS, TRUCK MOUNTED, hydraulic elevating mobile, having ALL 
of the following:
  (a) 4x4 drive chassis;
  (b) elevated height capacity NOT greater than 29 metres;
  (c) horizontal outreach capacity NOT greater than 19.5 metres

VEHICLES, OIL AND GAS WELL LOGGING AND PERFORATING

VACUUM CLEANERS, SMELTER POTROOM, having ALL of the 
following:
 (a) diesel engine;
 (b) driver cabin;
 (c) vacuum system with nozzle width NOT less than 1 600 mm;
 (d) hopper capacity NOT less than 1.2 m3

PUMPS, CONCRETE, truck mounted, having ALL of the following:
  (a) vehicle weight NOT exceeding 45 000 kg;
  (b) NOT less than 3 axles;
  (c) articulated boom vertical reach NOT greater than 52 m

ELEVATED WORK PLATFORM LIFTS, vehicle mounted, programmable 
logic controlled, including BOTH of the following:
  (a) boom stow;
  (b) position sensors

PUMPS, CONCRETE, truck-mounted, having ALL of the following:
  (a) vehicle weight NOT greater than 20 000 kg;
  (b) NOT less than 2 axles;
  (c) articulated boom vertical reach NOT greater than 20 metres

CONCRETE DOSING MACHINES ,diesel, self-propelled, having ALL of 
the following:
  (a) total vehicle weight NOT greater than 9 900 kgs;
  (b) four-wheel drive AND four wheel steering;
  (c) hydrostatic transmission;
  (d) rotating hopper;
  (e) hopper capacity NOT greater than 6 cubic metres;
  (f) screw auger capacity NOT greater 
      than 60 cubic metres per hour

MOBILE TELESCOPIC BELT CONVEYORS, TRUCK MOUNTED, on road, cab 
chassis, diesel engine, having ALL of the following:
  (a) main feed conveyor belt width NOT less than 450 mm;
  (b) conveyor reach NOT greater than 60 metres;
  (c) NOT less than 5-section boom arms;
  (d) NOT less than 8 driven wheels;
  (e) right-hand-drive carrier having NOT less than 4 axles;
  (f) control panel;
  (g) radio remote control

TRUCKS, hydraulic elevation platform, having ALL the following:
  (a) working height NOT greater than 78 m;
  (b) cage working load NOT greater than 700 kg;
  (c) outreach NOT greater than 38 m;

MOBILE TELESCOPIC BELT CONVEYORS, on road, cab chassis, diesel 
engine, having ALL of the following:
 (a) conveyors;
 (b) telescopic boom, having a horizontal reach NOT less 
     than 60 metres;
 (c) NOT less than 8 driven wheels

WASHERS, truck-mounted, including ALL the 
following:
  (a) hydraulic platform;
  (b) articulated AND telescopic boom system;
  (c) working height NOT greater than 15 metres;
  (d) suspension stabilising system;
  (e) hot water heating system;
  (f) high AND/OR low pressure spray guns

ELEVATED WORK PLATFORM LIFTS, TRUCK MOUNTED, having all of the 
following:
  (a) hydraulic control;
  (b) double articulated pantograph boom;
  (c) vertical plumb line movement; 
  (d) hydraulic outriggers

RAIL WELDING TRUCKS, including ALL of the following:
  (a) diesel engine NOT less than 8 cylinders;
  (b) road AND rail wheels;
  (c) welding head NOT less than 150 KVA

SURFACING VEHICLES, AGGREGATE AND/OR BITUMEN AND/OR CRUMB RUBBER 
AND/OR FILLERS, cab chassis, diesel engine, whether OR not 
assembled, having ALL of the following:
    (a) binder AND/OR sprayer AND/OR spreader AND/OR sealer;
    (b) material storage tanks;
    (c) hopper capacity NOT less than 5 cubic metreS;
    (d) tipper body with OR without conveyors AND/OR spoilers;
    (e) telescopic spray bar;
    (f) telescopic chip spreader with OR without distribution 
        augers AND/OR rollers;
    (g) hand lance with OR without winder
with OR without ANY of the following:	
          (i) pneumatic AND/OR hydraulic pumps;
         (ii) pneumatic AND/OR hydraulic circuits AND/OR 
              electrical circuits;
        (iii) oil burners;
         (iv) material loading crane;
          (v) hand-washing kit;
         (vi) thermostats AND/OR gauges;
        (vii) operating control panels AND/OR boards AND/OR 
              joystick with OR without cables AND/OR connectors
              AND/OR monitors AND/OR computer programs;
       (viii) cameras;
         (ix) printers;
          (x) pipes AND/OR fittings AND/OR mountings AND/OR 
              connectors;
         (xi) valves;
        (xii) motors;
       (xiii) air AND/OR fluid filters;
        (xiv) pressurized air intake unit AND/OR air purging 
              units;
         (xv) switches AND/OR sensors;
        (xvi) conveyor belts;
       (xvii) ladder AND/OR hooks;
      (xviii) twist-lock system;
        (xix) protection grids AND/OR hoods AND/OR tarpaulins

RAIL MAINTENANCE TRUCKS, including ALL of the following:
  (a) diesel engine;
  (b) road AND rail wheels; 
  (c) milling AND/OR grinding machines

VEHICLES, LAW ENFORCEMENT, incorporating an electro-magnetic 
radiation car stopping device, with OR without ANY of the 
following:
  (a) tailgate;
  (b) resonators;
  (c) manuals;
  (d) software

RESCUE VEHICLES, AIRPORT, including ALL of the following:
  (a) chassis;
  (b) cabin;
  (c) hydraulic AND telescopic staircase with tiltable ramp;
  (c) adjustable staircase height NOT less than 2.5 m and NOT 
      greater than 8.5 m;
  (d) equipment lockers;
  (e) support jacks,
with OR without any ONE or MORE of the following:
          (i) 60 m hose reel unit;
         (ii) pumps;
        (iii) tanks

CHIP SPREADERS, truck mounted, including ALL the following:
  (a) 4 axles;
  (b) camera with monitor screen;
  (c) conveyor belt;
  (d) dosage module incorporating surfaces AND quantities 
      calculator with printer;
  (e) fixed hopper;
  (f) twist lock frame removal module;
  (g) emptying hopper;
  (h) mini hopper with sifting grid AND auger

TRUCKS, BREAKDOWN RECOVERY, off road, having ALL of the 
following:
  (a) compression ignition engine;
  (b) 6 x 6 wheel drive;
  (c) cooling rig mounted above chassis;
  (d) gross vehicle weight NOT less than 25 t and NOT greater
      than 37 t;
  (e) winch;
  (f) operating temperature NOT less than -29 degrees Celsius
      and NOT greater than +49 degrees Celsius;
  (g) rear underlift recovery unit;
  (h) earth anchors;
  (j) crane, having a maximum reach NOT less than 6 m

TRUCKS, BREAKDOWN RECOVERY, off road, having ALL of the 
following:
  (a) compression ignition engine;
  (b) 10 x 10 wheel drive;
  (c) cooling rig mounted above chassis;
  (d) gross vehicle weight NOT less than 38 t and NOT greater
      than 58 t;
  (e) winch;
  (f) steerable tag axle;
  (g) operating temperature NOT less than -29 degrees Celsius
      and NOT greater than +49 degrees Celsius;
  (h) rear underlift recovery unit;
  (i) earth anchors;
  (j) rotating crane, having a maximum reach NOT less than 9 m

TRUCKS, EARTH DENSITY CONE PENETROMETER TESTING, including ALL 
of the following: 
  (a) ballast; 
  (b) cabin;
  (c) levelling jacks;
  (d) penetrometer pusher

SURFACING VEHICLES, BITUMEN AND AGGREGATE, cab chassis, diesel 
engine, having a gross vehicle weight NOT less than 30 t, 
including ALL the following:
  (a) bitumen AND aggregate dispersion, programmable logic
      controlled;
  (b) joysticks AND touch screens;
  (c) camera; 
  (d) bitumen tank;
  (e) aggregate hopper;
  (f) telescopic bitumen sprayer;
  (g) telescopic aggregate spreader;
  (h) loading crane;
  (i) NOT less than 6 wheels

SWEEPERS, SUCTION, ride in, diesel engine, having ALL of the 
following:
  (a) two wheel OR four wheel steering;
  (b) sweeping width NOT greater than 3 150 mm;
  (c) hopper capacity NOT greater than 1.85 m3;
  (d) transit speed NOT greater than 50 km/h;
  (e) outer turning radius NOT greater than 3 780 mm;
  (f) width NOT greater than 1 325 mm;
  (g) height NOT greater than 1 995 mm

WATER CANNON TRUCKS, MINING, self-propelled, four wheel drive,  
having BOTH of the following:
  (a) on board water tank;
  (b) telescopic boom AND nozzle actuator

PUMPS, CONCRETE, BOOM PLACING, VEHICLE MOUNTED, having ALL of 
the following:
  (a) total vehicle weight NOT greater than 40 000 kg;
  (b) vehicle having NOT less than 3 axles;
  (c) articulated boom, maximum vertical reach NOT greater than
      47 m

CLEANERS, SUCTION COLLECTION, WASHING AND/OR SCRUBBING STREET 
AND/OR PAVEMENT, ride in, having ALL of the following:
  (a) scrubbing width NOT greater than 2 200 mm;
  (b) suction squeegee width NOT greater than 1 700 mm;
  (c) waste collection hopper capacity NOT greater than
      2 cubic metres;
  (d) travelling speed NOT greater than 50 kph

SWEEPERS, SUCTION COLLECTION, ride in, comprising ALL of the 
following:
  (a) hopper capacity NOT greater than 2.0 cubic metres;
  (b) maximum suction mouth width NOT greater than 800 mm;
  (c) maximum horizontal wide sweep brush diameter NOT greater
      than 350 mm;
  (d) maximum sweeping width NOT greater than 2 500 mm;
  (e) maximum travelling speed NOT greater than 70 kph

VEHICLES, UNDER BRIDGE INSPECTION PLATFORM

PLATFORMS, TRUCK MOUNTED, hydraulic elevating mobile, having ALL 
of the following:
  (a) 4x4 drive chassis;
  (b) elevated height capacity NOT greater than 29 metres;
  (c) horizontal outreach capacity NOT greater than 19.5 metres

SWEEPERS, PEDESTRIAN MALL, suction, having a hopper with a 
debris volume capacity NOT greater than 1.5 m3

PUMPS, CONCRETE, BOOM PLACING, VEHICLE MOUNTED, having ALL of 
the following:
  (a) vehicle weight exceeding 45 000 kg;
  (b) vehicle having NOT less than 6 axles;
  (c) articulated boom, vertical reach exceeding 50 m

TRUCKS, incorporating a hydraulic elevating platform having a 
maximum elevated height NOT less than 37 m

HARVESTORS AND CLEANERS, AMPHIBIOUS

WASHERS, TUNNEL, vehicle mounted

VEHICLES, OIL AND GAS WELL LOGGING AND PERFORATING

SWEEPERS, SUCTION COLLECTION, ride in, comprising ALL of the
 following:
   (a) hopper capacity NOT greater than 1.715 cubic metres;
   (b) maximum suction mouth width NOT greater than 800 mm;
   (c) maximum sweeping width NOT greater than 2 500 mm;
   (d) maximum travelling speed NOT greater than 50 kph

CHASSIS, BUS, hybrid, gross vehicle mass exceeding 18 tonne, 
having ALL of the following:
  (a) 4 x 2 wheel drive;
  (b) compression ignition engine;
  (c) permanent magnet synchronous electric motor;
  (d) power inverter;
  (e) power converter;
  (f) inverter cooling system;
  (g) battery cooling system;
  (h) lithium-ion battery

CHASSIS, BUS, articulated, having a gross vehicle weight greater 
than 24 t

CHASSIS, BUS, having BOTH of the following:
  (a) 6 x 2 wheel drive steerable tag axle;
  (b) gross vehicle weight NOT less than 24 tonnes

PARTS FOR VEHICLES, being original equipment or reproductions
 of goods fitted as original equipment to vehicles having BOTH
 of the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

TRUCK CABS, ON ROAD, being cab shells, having a gross vehicle 
mass NOT less than 4 500 kg with BOTH of the 
following:
  (a) windows;
  (b) side door lamps

ASSEMBLIES, SUCTION STREET SWEEPER, having BOTH of the 
following:
  (a) auxiliary diesel engine rating NOT less than 84 kW and 
      NOT greater than 109 kW;
  (b) body volume NOT less than 6.4 m3 and NOT greater than 
      8.2 m3,
with OR without ANY of the following:
  (a) channel brushes;
  (b) nozzles;
  (c) centre sweep brush

CHASSIS BODIES, SUCTION STREET SWEEPER HAVING A GROSS VEHICLE 
WEIGHT OF MORE THAN 3.5 TONNES, including ALL of the 
following:
  (a) auxiliary engine drive OR hydrostatic transmission drive;
  (b) hopper;
  (c) suction fan;
  (d) suction nozzles;
  (e) side brushes;
  (f) wide sweep brush;
  (g) water tank and pump

PARTS, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT NOT LESS 
THAN 7.5 TONNES, being truck bodies

PARTS FOR VEHICLES, being original equipment or reproductions
 of goods fitted as original equipment to vehicles having BOTH
 of the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) bumpers;
  (b) bumper overrides

PARTS, OPEN WHEEL SINGLE SEAT RACE CAR, being EITHER of the 
following:
  (a) extraction belts kit;
  (b) harness belts

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) side, front or rear panels;
  (b) floor boards and cross members;
  (c) chassis frames not fitted with engines;
  (d) doors;
  (e) outer and inner door skin panels;
  (f) bonnets and luggage compartment covers;
  (g) window frames;
  (h) running boards and visors;
  (i) mudguards and wings;
  (j) exterior luggage racks;
  (k) suspension mounting points;
  (l) roof panels

PARTS, MOTOR VEHICLE, being a titanium strut bar

BODY PANELS AND RAILS, OFF ROAD VEHICLES, sheet metal, being ANY of
 the following:
   (a) cowl grills;
   (b) door panels;
   (c) door panel pillars;
   (d) door rails;
   (e) door shells;
   (f) door sill panels;
   (g) fenders/guards;
   (h) fire walls;
   (i) floor pans;
   (j) front grills;
   (k) fuel filler doors and housing;
   (l) hoods/bonnets;
   (m) quarter panels, rear;
   (n) rear pillars;
   (o) roof panels and rails;
   (p) side body panels;
   (q) tail lamp panels;
   (r) tailgate shells;
   (s) underbody skid plates;
   (t) underbody skids;
   (u) wheelhouse panels and sills
 For the purposes of the Order "off road vehicles" means four-wheel
 drive vehicles classified within tariff heading 8703 that have
 at least four of the following characteristics calculated when the
 vehicle is at its unladen mass (i.e., vehicle in running order,
 unoccupied and unladen with all fluid reservoirs including fuel,
 filled to normal capacity and with all standard equipment) on a
 level surface, with the front wheels parallel to the vehicle"s
 longitudinal centreline, and the tyres inflated to the
 manufacturer"s recommended pressure:
   (a) Approach angle of NOT less than 28 degrees
        -  the approach angle is the smallest angle, in the side view
           of a vehicle, formed by the level surface on which the
           vehicle is standing and a line tangent to the front tyre
           "Static Loaded Tyre Radius" arc and touching the underside
           of the vehicle forward of the front tyre;
   (b) Breakover angle of NOT less than 14 degrees
        -  the breakover angle is the supplement of the largest
           angle, in the side view of a vehicle, that can be formed
           by lines tangent to the front and rear "Static Loaded Tyre
           Radius" arcs and intersecting at a point on the underside
           of the vehicle;
   (c) Departure angle of NOT less than 20 degrees
        -  the departure angle is the smallest angle, in the side
           view of a vehicle, formed by the level surface on which
           the vehicle is standing and a line tangent to the rear
           tyre "Static Loaded Tyre Radius" arc and touching the
           underside of the vehicle rearward of the rear tyre;
   (d) Running clearance of NOT less than 200 mm
        -  the distance from the surface on which a vehicle is
           standing to the lowest point on the vehicle excluding
           unsprung mass;
   (e) Front axle, rear axle and suspension clearance of NOT less
       than 175 mm each
        -  front axle and rear axle clearance is the vertical
           distance from the level surface on which the vehicle is
           standing to the lowest point on the "axle" differential
           (when applicable in case of a front "axle") of the
           vehicle;
        -  suspension clearance is the minimum distance from the
           front and rear suspensions to the ground

BODY PANELS, OFF ROAD VEHICLE, sheet metal, being replacement parts
 warranted by the vehicle manufacturer, being ANY of the following:
   (a) sill panels;
   (b) front balance panels;
   (c) cowl top panels;
   (d) quarter panels;
   (e) roof panels;
   (f) floor panels;
   (g) fender panels;
   (h) door panels;
   (i) hood panels;
   (j) boot panels;
   (k) back panels;
   (l) upper panels;
   (m) side panels;
   (n) body panels;
   (o) windshield panels;
   (p) body pillars;
   (q) dash panels;
   (r) apron panels;
 For the purposes of the Order "off road vehicles" means four-wheel
 drive vehicles that have at least four of the following
 characteristics calculated when the vehicle is at its unladen mass
 (i.e., vehicle in running order, unoccupied and unladen with all
 fluid reservoirs including fuel, filled to normal capacity and with
 all standard equipment) on a level surface, with the front wheels
 parallel to the vehicle"s longitudinal centreline, and the tyres
 inflated to the manufacturer"s recommended pressure-
   (a) Approach angle of NOT less than 28 degrees
        -  the approach angle is the smallest angle, in the side view
           of the vehicle, formed by the level surface on which the
           vehicle is standing and a line tangent to the front tyre
           "Static Loaded Tyre Radius" arc and touching the underside
           of the vehicle forward of the front tyre;
   (b) Breakover angle of NOT less than 14 degrees
        -  the breakover angle is the supplement of the largest angle
           in the side view of a vehicle, that can be formed by two
           lines tangent to the front and rear "Static Loaded Tyre
           Radius" arcs and intersecting at a point on the underside
           of the vehicle;
   (c) Departure angle NOT less than 20 degrees
        -  the departure angle is the smallest angle, in the side
           view of a vehicle, formed by the level surface on which
           the vehicle is standing and a line tangent to the rear
           tyre "Static Loaded Tyre Radius" arc and touching the
           underside of the vehicle rearward of the rear tyre;
   (d) Running clearance of NOT less than 200 mm
        -  the distance from the surface on which a vehicle is
           standing to the lowest point on the vehicle excluding
           unsprung mass;
   (e) Front axle, rear axle and suspension clearance of NOT less
       than 175 mm each
        -  front axle and rear axle clearance is the vertical
           distance from the level surface on which the vehicle is
           standing to the lowest point on the "axle" differential
           (when applicable in case of a front "axle") of the
           vehicle;
        -  suspension clearance is the minimum distance from the
           front and rear suspensions to the ground

PANELS, sheet metal, being components for motor vehicles having a
 GVW exceeding 3.5 tonne, warranted by the vehicle manufacturer

BODY PANELS, sheet metal, being replacement components for trucks
 having a gross vehicle weight of 8 t OR greater

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
   (a) aprons;
   (b) angles;
   (c) armrests;
   (d) arms;
   (e) axles;
   (f) backings;
   (g) bars;
   (h) belts;
   (i) bezels;
   (j) bins;
   (k) boards;
   (l) body sides;
   (m) bonnets;
   (n) bosses;
   (o) bows;
   (p) boxes;
   (q) braces;
   (r) brackets;
   (s) buckles;
   (t) bugscreens;
   (u) bulkheads;
   (v) bumpers;
   (w) buttons;
   (x) cantrails;
   (y) caps;
   (z) cappings;
  (aa) channels;
  (ab) clamps;
  (ac) closets;
  (ad) collars;
  (ae) compartments;
  (af) consoles;
  (ag) control panels;
  (ah) coverings;
  (ai) covers;
  (aj) cowls;
  (ak) crossmembers;
  (al) cup holders;
  (am) cups;
  (an) curtains;
  (ao) dash;
  (ap) dashboards;
  (aq) deckplates;
  (ar) deflectors;
  (as) desks;
  (at) doors;
  (au) ducts;
  (av) ejectors;
  (aw) extensions;
  (ax) facings;
  (ay) fascias;
  (az) fenders;
  (ba) fillers;
  (bb) firewalls;
  (bc) flaps;
  (bd) floorpans and boards;
  (be) floors;
  (bf) frames;
  (bg) grilles;
  (bh) guards;
  (bi) guides;
  (bj) hangers;
  (bk) harnesses;
  (bl) headliners;
  (bm) holders;
  (bn) hoods;
  (bo) housings;
  (bp) inserts;
  (bq) insulator panels;
  (br) isolators;
  (bs) lappers;
  (bt) lifts;
  (bu) linings;
  (bv) louvers;
  (bw) lugs;
  (bx) mats;
  (by) mouldings;
  (bz) mountings;
  (ca) nets;
  (cb) overiders;
  (cc) pads;
  (cd) panels;
  (ce) pedals;
  (cf) pillars;
  (cg) plates;
  (ch) platforms;
  (ci) pockets;
  (cj) pivots;
  (ck) raceway;
  (cl) racks;
  (cm) rails;
  (cn) rearwalls;
  (co) regulators;
  (cp) reinforcements;
  (cq) rests;
  (cr) retainers;
  (cs) rods;
  (ct) roofs;
  (cu) runners;
  (cv) scoops;
  (cw) screens;
  (cx) sheets;
  (cy) shells;
  (cz) shelves;
  (da) shields;
  (db) shrouds;
  (dc) shutters;
  (dd) sills;
  (de) skids;
  (df) skirts;
  (dg) sleepers;
  (dh) sockets;
  (di) spacers;
  (dj) spoilers;
  (dk) stabilisers;
  (dl) stairs;
  (dm) steps;
  (dn) stiffeners;
  (do) stoppers;
  (dp) straps;
  (dq) strips;
  (dr) struts;
  (ds) sun roofs;
  (dt) supports;
  (du) tanks;
  (dv) tows;
  (dw) tracks;
  (dx) trays;
  (dy) trims;
  (dz) tubing;
  (ea) understructure;
  (eb) ventilators;
  (ec) vents;
  (ed) visors;
  (ee) walls;
  (ef) weldments;
  (eg) wings

PARTS, OPEN WHEEL SINGLE SEAT RACE CAR BODY, being ANY of the 
following:
  (a) fuel tank padding;
  (b) left AND/OR right rear side pods; 
  (c) left AND/OR right front side pods;
  (d) left AND/OR right radiator air duct;
  (e) side pod brackets;
  (f) skid blocks;
  (g) wood floor;
  (h) splitters;
  (i) left AND/OR right flat floor tie rods;
  (j) front flat floor;
  (k) rear flat floor;
  (l) front covers;
  (m) rear covers;
  (n) non-glass wind screen ;
  (o) engine cover brackets;
  (p) front AND rear wheel tether covers;
  (q) rear wing mounts;
  (r) lower rear wings;
  (s) upper rear wings;
  (t) rear end plates;
  (u) front end plates;
  (v) front wings;
  (w) left AND/OR right front wing mounts;
  (x) front wing gurneys ;
  (y) upper harness brackets

PARTS, ARTICULATED BUS, being concertina walls

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
   (a) aprons;
   (b) angles;
   (c) armrests;
   (d) arms;
   (e) axles;
   (f) backings;
   (g) bars;
   (h) belts;
   (i) bezels;
   (j) bins;
   (k) boards;
   (l) body sides;
   (m) bonnets;
   (n) bosses;
   (o) bows;
   (p) boxes;
   (q) braces;
   (r) brackets;
   (s) buckles;
   (t) bugscreens;
   (u) bulkheads;
   (v) bumpers;
   (w) buttons;
   (x) cantrails;
   (y) caps;
   (z) cappings;
  (aa) channels;
  (ab) clamps;
  (ac) closets;
  (ad) collars;
  (ae) compartments;
  (af) consoles;
  (ag) control panels;
  (ah) coverings;
  (ai) covers;
  (aj) cowls;
  (ak) crossmembers;
  (al) cup holders;
  (am) cups;
  (an) curtains;
  (ao) dash;
  (ap) dashboards;
  (aq) deckplates;
  (ar) deflectors;
  (as) desks;
  (at) doors;
  (au) ducts;
  (av) ejectors;
  (aw) extensions;
  (ax) facings;
  (ay) fascias;
  (az) fenders;
  (ba) fillers;
  (bb) firewalls;
  (bc) flaps;
  (bd) floorpans and boards;
  (be) floors;
  (bf) frames;
  (bg) grilles;
  (bh) guards;
  (bi) guides;
  (bj) hangers;
  (bk) harnesses;
  (bl) headliners;
  (bm) holders;
  (bn) hoods;
  (bo) housings;
  (bp) inserts;
  (bq) insulator panels;
  (br) isolators;
  (bs) lappers;
  (bt) lifts;
  (bu) linings;
  (bv) louvers;
  (bw) lugs;
  (bx) mats;
  (by) mouldings;
  (bz) mountings;
  (ca) nets;
  (cb) overiders;
  (cc) pads;
  (cd) panels;
  (ce) pedals;
  (cf) pillars;
  (cg) plates;
  (ch) platforms;
  (ci) pockets;
  (cj) pivots;
  (ck) raceway;
  (cl) racks;
  (cm) rails;
  (cn) rearwalls;
  (co) regulators;
  (cp) reinforcements;
  (cq) rests;
  (cr) retainers;
  (cs) rods;
  (ct) roofs;
  (cu) runners;
  (cv) scoops;
  (cw) screens;
  (cx) sheets;
  (cy) shells;
  (cz) shelves;
  (da) shields;
  (db) shrouds;
  (dc) shutters;
  (dd) sills;
  (de) skids;
  (df) skirts;
  (dg) sleepers;
  (dh) sockets;
  (di) spacers;
  (dj) spoilers;
  (dk) stabilisers;
  (dl) stairs;
  (dm) steps;
  (dn) stiffeners;
  (do) stoppers;
  (dp) straps;
  (dq) strips;
  (dr) struts;
  (ds) sun roofs;
  (dt) supports;
  (du) tanks;
  (dv) tows;
  (dw) tracks;
  (dx) trays;
  (dy) trims;
  (dz) tubing;
  (ea) understructure;
  (eb) ventilators;
  (ec) vents;
  (ed) visors;
  (ee) walls;
  (ef) weldments;
  (eg) windows;
  (eh) wings

PARTS, OFF-HIGHWAY REAR DUMP TRUCK, being body parts comprising ANY
 of the following:
   (a)  angles;
   (b)  ball studs;
   (c)  bars;
   (d)  bonnets;
   (e)  bosses;
   (f)  braces;
   (g)  brackets;
   (h)  catwalks;
   (i)  channels;
   (j)  consoles;
   (k)  covers;
   (l)  instrumental panels;
   (m)  doors;
   (n)  ejectors;
   (o)  fenders;
   (p)  floor plates;
   (q)  frames;
   (r)  grab irons;
   (s)  grilles;
   (t)  guards;
   (u)  hangers;
   (v)  handrails;
   (w)  hoods;
   (x)  ladders;
   (y)  liners;
   (z)  lugs;
   (aa) mounting kits;
   (ab) pads;
   (ac) panels;
   (ad) pedals;
   (ae) pipes;
   (af) plates;
   (ag) platforms;
   (ah) pockets;
   (ai) sheets;
   (aj) shrouds;
   (ak) shutters;
   (al) stairways;
   (am) steps;
   (an) visors;
   (ao) window frames

PARTS, MOTOR VEHICLE HAVING A GROSS WEIGHT EXCEEDING 3.5 TONNES, 
being EITHER of the following:
  (a) mounted pads;
  (b) lined brake shoes

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being mounted brake linings

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being mounted brake linings

BRAKE MASTER CYLINDERS, cast iron OR aluminium body

BRAKE WHEEL CYCLINDERS, cast iron OR aluminium body

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of the
 following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 being ANY of the goods listed in THE TABLE, but NOT including
 brake pads OR linings
                 THE TABLE
   (a) brake pedals;
   (b) brake mechanisms

PARTS FOR VEHICLES, being reproductions of goods fitted as
 original equipment to vehicles, having BOTH of the following
 characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1935,
 being braking systems from the foot pedal to the brake drum or
 disc inclusive

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) brake plates and shoes but NOT including moulded linings;
  (b) disks and disc callipers;
  (c) drums;
  (d) wheel cylinders;
  (e) master cylinders;
  (f) brake lines;
  (g) brake servos;
  (h) brake balance bars;
  (i) brake ducts

PARTS, OFF-HIGHWAY DUMP TRUCK, being brake calliper repair kits, 
including ALL of the following:
  (a) pistons;
  (b) plugs;
  (c) pads;
  (d) seal kit;
  (e) screw

PARTS, ON ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT GREATER THAN 
3.5 TONNES, being ANY of the following:
  (a) discs;
  (b) drums;
  (c) hubs;
  (d) rotors

PARTS, BRAKE, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT 
LESS THAN 7.5 TONNES, being ANY of the following:
  (a) discs;
  (b) drums;
  (c) hubs;
  (d) rotors

PARTS, BRAKE, DUMP TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS 
7.5 TONNES, being ANY of the following:
  (a) slack adjusters;
  (b) callipers;
  (c) caps;
  (d) chambers;
  (e) cylinders;
  (f) dampers;
  (g) discs;
  (h) disc kits, including ALL of the following:
         (i) discs;
        (ii) shims;
       (iii) seal;
        (iv) damper;
         (v) bolts, 
  (i) drums;
  (j) guides;
  (k) brake housings;
  (l) pistons;
  (m) pistons kits, including ALL of the following:
         (i) pistons;
        (ii) seal;
       (iii) o-rings,
  (n) piston housings;
  (o) plates;
  (p) plugs;
  (q) retainers;
  (r) shoes;
  (s) shoe kits, including ALL of the following:
         (i) linings;
        (ii) spring;
       (iii) shoe,
  (t) shims;
  (u) wedges

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
   (a) adjusters;
   (b) anchors;
   (c) axles;
   (d) beams;
   (e) braces;
   (f) brackets;
   (g) brakes;
   (h) bushings;
   (i) cables;
   (j) calipers;
   (k) camshafts;
   (l) caps;
   (m) carriers;
   (n) chambers;
   (o) couplings;
   (p) cylinders;
   (q) diaphragms;
   (r) gears;
   (s) guides;
   (t) housings;
   (u) knuckles;
   (v) links;
   (w) panels;
   (x) pins;
   (y) pistons;
   (z) plates;
   (aa) plugs;
   (ab) plungers;
   (ac) reservoirs;
   (ad) retainers;
   (ae) rods;
   (af) separators;
   (ag) shafts;
   (ah) shields;
   (ai) shims;
   (aj) shoes;
   (ak) slack adjusters;
   (al) slips;
   (am) studs;
   (an) tanks;
   (ao) ties;
   (ap) yokes

AXLE COMPONENTS, being oil immersed brake discs

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being brakes and brake parts comprising ANY of the
 following:
   (a) service brakes;
   (b) parking brakes;
   (c) master cylinders;
   (d) wheel cylinders;
   (e) brake callipers;
   (f) housings;
   (g) discs;
   (h) plates;
   (i) guides;
   (j) pistons;
   (k) drums;
   (l) anchors;
   (m) hubs

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being brakes and brake parts comprising ANY of the
 following:
   (a) service brakes;
   (b) parking brakes;
   (c) master cylinders;
   (d) wheel cylinders;
   (e) brake callipers;
   (f) housings;
   (g) discs;
   (h) plates;
   (i) guides;
   (j) pistons;
   (k) drums;
   (l) anchors;
   (m) hubs

BRAKE CHAMBER, a combined double diaphram spring brake actuator
 with a 24 sq in. service diaphram and a 30 sq in. spring release
 diaphram, with a working stroke of 2.25 in. to s-cam brakes

PARTS FOR VEHICLES, being original equipment or reproductions
 of goods fitted as original equipment to vehicles having BOTH
 of the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) gearboxes;
  (b) gearbox transaxles

TRANSMISSIONS, OFF HIGHWAY REAR DUMP TRUCK, automatic

TRANSMISSIONS, OFF-HIGHWAY VEHICLES HAVING A GROSS VEHICLE 
WEIGHT GREATER THAN 44 t, having ALL of the following:
  (a) input power rating NOT less than 290 kW and NOT greater
      than 1 700 kW;
  (b) torque converter and lock up clutch;
  (c) planetary gear sets;
  (d) hydraulic clutches

TRANSMISSIONS, VEHICLES HAVING A GROSS VEHICLE WEIGHT GREATER 
THAN 7 t, having ALL of the following:
  (a) input torque rating greater than 600 Nm;
  (b) input power rating greater than 140 kW;
  (c) helical gearing

TRANSMISSIONS, VEHICLES HAVING A GROSS VEHICLE WEIGHT GREATER 
THAN 10 t, having ALL of the following:
  (a) input torque rating greater than 600 Nm;
  (b) input power rating greater than 140 kW;
  (c) turbine torque rating greater than 1 000 Nm

GEARBOXES, MIXER DRIVE, comprising ALL of the following:
   (a) tilting output flange external to the main bearing;
   (b) 2 OR 3 stage planetary reductions;
   (c) maximum rated torque NOT less than 45 000 Nm and NOT greater
       than 80 000 Nm

PARTS, OFF-HIGHWAY REAR DUMP TRUCK, (GVW greater than 3.5 t),
 being EITHER of the following:
      (a) transmissions;
      (b) transmissions with torque converter

GEARBOXES, automatic, having ALL of the following:
  (a) maximum weight range from 220 kg to 300 kg;
  (b) maximum engine torque range from 700 Nm to 1 600 Nm;
  (c) maximum permissible input speed from 2 650 rpm to 2 900 rpm;
  (d) gear ratios from 8.05 to 1.00;
  (e) reverse gear ratio 5.67;
  (f) maximum number of forward gears 6;
 being gearboxes imported without ANY of the following:
     (i) transfer gearboxes;
    (ii) ancillary gearboxes;
   (iii) ancillary transmission units

GEARBOXES, AUTOMATIC OR MANUAL, being EITHER of the following:
   (a) automatic gearboxes having ALL of the following:
         (i) maximum weight range from 300 kg to 400 kg;
        (ii) maximum engine torque range from 700 Nm to 1 600 Nm;
       (iii) maximum permissible input speed from 2 650 rpm to
             2 800 rpm;
        (iv) design gear ratios from 4.84 to 0.59;
         (v) design reverse gear ratio 4.84;
        (vi) maximum number of forward gears 6;
       (vii) with or without overdrive unit;
   (b) manual gearboxes having ALL of the following:
         (i) maximum weight range from 170  kg to 400 kg;
        (ii) maximum engine torque range from 1 200 Nm to 2 500 Nm;
       (iii) maximum number of forward gears 16;
        (iv) with or without overdrive unit;
 being gearboxes imported WITHOUT ANY of the following:
   (a) transfer gearboxes;
   (b) other ancillary gearboxes;
   (c) other ancillary transmission units

GEARBOXES, AUTOMATIC OR MANUAL, being EITHER of the following:
   (a) automatic gearboxes having ALL of the following:
         (i) maximum weight range from 300 kg to 330 kg;
        (ii) maximum engine torque range from 1 050 Nm to 1 600 Nm;
       (iii) maximum permissible input speed from 2 650 rpm to
               2 800 rpm;
        (iv) design gear ratios from 3.43 to 0.59;
         (v) design reverse gear ratio 4.84;
        (vi) maximum number of forward gears 6;
       (vii) with or without overdrive unit;
   (b) manual gearboxes having ALL of the following:
         (i) maximum weight range from 170 to 319 kg;
        (ii) maximum engine torque range from 1 600 Nm to 2 300 Nm;
       (iii) maximum number of forward gears 16;
        (iv) with or without overdrive unit;
 being gearboxes imported WITHOUT ANY of the following:
   (a) transfer gear boxes;
   (b) other ancillary gear boxes;
   (c) other ancillary transmission units,

GEAR BOXES, manual or automatic having BOTH of the following
 characteristics:
   (a) engine output torque capacity NOT less than 640 Nm;
   (b) number of speeds NOT less than 6

PARTS OF ARTICULATED OFF HIGHWAY DUMP TRUCK TRACTORS classified
 to sub-heading 8701.90.20 having a payload capacity when complete
 with dump trailer of 18t or greater

GEARBOXES, COMMERCIAL TRUCK, 5 SPEED AUTOMATIC OR MANUAL, 
comprising BOTH of the following:
  (a) gross vehicle weight greater than 8 000 kgs;
  (b) torque rating greater than 500 nm

PARTS, GEARBOX, having an engine output NOT less than 640 Nm,
 being ANY of the following:
   (a) gears, pinions, sun wheels, gear wheels and drivers;
   (b) shafts, rods and levers;
   (c) bearings and bushings;
   (d) housings and covers;
   (e) plates, brackets and flanges;
   (f) cylinders;
   (g) rotors and discs;
   (h) spacer rings, retaining rings and shims;
   (i) shift and selector forks;
   (j) sleeves and cones;
   (k) pistons;
   (l) joints and couplings;
   (m) synchromesh;
   (n) speedometer drives;
   (o) sliders;
   (p) yokes;
   (q) holders

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

DRIVE AXLES, ROAD TO RAIL VEHICULAR CONVERSION, with OR without 
ANY of the following:
  (a) electric motor AND/OR controls;
  (b) clutch AND/OR transmission control;
  (c) programmable logic control AND/OR hydraulic control

AXLES, DRIVE OR DRIVE AND STEER, planetary

PARTS, DRIVE AXLE AND DIFFERENTIAL ASSEMBLY, OFF-HIGHWAY DUMP 
TRUCK OR MINING TRUCK HAVING A GROSS VEHICLE WEIGHT OF MORE THAN 
3.5 TONNES, being ANY of the following:
  (a) differentials;
  (b) oil pans;
  (c) covers;
  (d) guards;
  (e) plates;
  (f) tube fittings AND tubes:
  (g) shims;
  (h) housings;
  (i) yokes;
  (j) hubs;
  (k) shafts;
  (l) differential cases;
  (m) differential pinions;
  (n) gears;
  (o) differential carriers
  (p) welded double plate brackets

PARTS, DRIVE OR DRIVE AND STEER AXLES, ON-ROAD TRUCKS HAVING A 
GROSS VEHICLE WEIGHT EXCEEDING 3.5 TONNES, being EITHER of the 
following:
  (a) hub assemblies, with OR without Anti-lock Braking System
     (ABS) pole rings, consisting of ALL of the
      following:
        (a) wheel hub;  
        (b) wheel studs;
        (c) drive studs;
        (d) bearing cups
  (b) hub and brake drum assemblies, with OR without Anti-lock
      Braking System (ABS) pole rings, consisting of ALL of the
      following:
        (a) wheel hub;  
        (b) wheel studs;
        (c) drive studs;
        (d) bearing cups;
        (e) brake drum;
        (f) shipping nuts

PARTS, DRIVE AXLES, ON ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT 
NOT LESS THAN 7.5 TONNES, being ANY of the following:
     (a) air cylinder covers;
     (b) air cylinder pistons;
     (c) air cylinder tubes;
     (d) axle driving heads;
     (e) axle housings;
     (f) axle shafts;
     (g) axle shaft gears;
     (h) bevel gears;
     (i) breather assemblies;
     (j) calliper slide pins;
     (k) carrier covers;
     (l) case and nest assemblies;
     (m) case assemblies;
     (n) case halves;
     (o) clutch collars;
     (p) companion flanges;
     (q) countershaft gears;
     (r) coupling flange assemblies;
     (s) cross tubes;
     (t) cross u-joints;
     (u) differential carrier assemblies;
     (v) differential case assemblies;
     (w) differential housing assemblies;
     (x) differential lock pistons;
     (y) differential nests;
     (z) differential pinion gears;
    (aa) differential spiders;
    (ab) dog clutches;
    (ac) drive gear pinion assemblies;
    (ad) drive pinion covers;
    (ae) drive shafts;
    (af) drive tubes;
    (ag) driving flanges;
    (ah) driving flange assemblies;
    (ai) driving heads;
    (aj) strap yokes;
    (ak) end covers;
    (al) final drive housings;
    (am) helical gears;
    (an) housing covers;
    (ao) input shaft assemblies;
    (ap) intermediate pieces;
    (aq) lock plates;
    (ar) lock rings;
    (as) locking flanges;
    (at) oil catch plates;
    (au) output shafts;
    (av) output shaft assemblies;
    (aw) output shaft gears;
    (ax) pinion bearing cages;
    (ay) pinion cases;
    (az) pinion covers;
    (ba) pinion gears;
    (bb) planet carriers;
    (bc) planet gears;
    (bd) ring gears;
    (be) ring gear carriers;
    (bf) ring lock pins;
    (bg) roll pins;
    (bh) round bearing yokes;
    (bi) drive line yokes;
    (bj) selection forks;
    (bk) selector shafts;
    (bl) shaft assembly pistons;
    (bm) shaft yokes;
    (bn) shift assemblies;
    (bo) shift assembly covers;
    (bp) shift cylinders;
    (bq) shift cylinder housings;
    (br) shift cylinder pistons;
    (bs) shift forks;
    (bt) shift fork pins;
    (bu) shift housings;
    (bv) shift shafts;
    (bw) shift sleeves;
    (bx) side gears;
    (by) spindle assemblies;
    (bz) steering arms;
    (ca) steering knuckles;
    (cb) sun gears;
    (cc) thrust rings;
    (cd) tie rod assemblies;
    (ce) torque plates;
    (cf) wing bearing yokes;
    (cg) yoke and deflector assemblies

AXLE COMPONENTS, being crown wheels and pinions having a crown
 wheel dia exceeding 300 mm

DIFFERENTIAL ASSEMBLIES, drive axle, incorporating a crown wheel
 having a dia of 300 mm or greater, but NOT including parts OTHER
 THAN crown wheels and pinions with the crown wheel having a dia
 exceeding 300 mm

DRIVE AXLE HEAD ASSEMBLIES with or without power divider, having a
 crown wheel diameter NOT less than 370 mm

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS, STEER AXLES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT 
EXCEEDING 3.5 TONNES, being EITHER of the following:
  (a) hub assemblies, with OR without Anti-lock Braking System
     (ABS) pole rings, consisting of ALL of the
      following:
        (a) wheel hub;  
        (b) wheel studs;
        (c) bearing cups
  (b) hub and brake drum assemblies, with OR without Anti-lock
      Braking System (ABS) pole rings, consisting of ALL of the
      following:
        (a) wheel hub;  
        (b) wheel studs;
        (c) bearing cups;
        (d) brake drum;
        (e) shipping nuts

PARTS, DUMP TRUCK HAVING A GROSS WEIGHT GREATER THAN 3.5 TONNE, 
being non-drive spindles

PARTS, TRUCK, HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 
TONNES, being non-driving axles

HUBS, WHEEL, cast aluminium

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being non-driving axles and parts thereof comprising ANY
 of the following:
   (a) brackets;
   (b) carriers;
   (c) shafts;
   (d) housings;
   (e) supports

PARTS, NON-ARTICULATED OFF HIGHWAY REAR DUMP TRUCKS having a
 carrying capacity of 45 t or greater, being complete wheel
 assemblies, but NOT including:
    (a) steel rims or wheels less than 508 mm (20 in) diameter;
    (b) demountable wheel rims of 558.8 mm (22 in) to 571.5 mm
        (22 1/2 in) diameter;
    (c) parts thereof imported seperately

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 but NOT including wire wheel nuts (knock ons)

RIMS AND ASSEMBLIES, wheel, in ANY of the following sizes:
   (a) 6.5 H x 16 in.;
   (b) 10 x 15 in.;
   (c) 10 x 20 in.;
   (d) 8 x 24 in.;
   (e) 8.5 x 24 in.;
   (f) 10 x 24 in.

WHEELS, forged aluminium, unmachined, having a rim dia exceeding
 445 mm

SPOKES, wheel

WHEEL COVERS

PARTS, MOTORIZED ELECTRIC WHEELS, DUMP TRUCK, having a carrying
 capacity of 45 t OR greater, being ANY of the following:
   (a)  adapter rings;
   (b)  bearing caps;
   (c)  clamps;
   (d)  gear sets;
   (e)  housings;
   (f)  hub clamping plates;
   (g)  hubs and caps therefor;
   (h)  magnet frames;
   (i)  rings;
   (j)  shims;
   (k)  supports;
   (l)  thrust rings;
   (m)  torque tubes;
   (n)  wear bands;
   (o)  collars;
   (p)  filler necks and caps therefor;
   (q)  dipsticks;
   (r)  clamps;
   (s)  plugs;
   (t)  caps;
   (u)  retainers;
   (v)  covers;
   (w)  spacers;
   (x)  guides;
   (y)  plates;
   (z)  shields;
   (aa) flingers;
   (ab) baffles;
   (ac) speed sensors;
   (ad) tubing assemblies;
   (ae) pads;
   (af) brake line assemblies;
   (ag) wedges;
   (ah) seats, spring;
   (ai) cleats;
   (aj) brackets;
   (ak) sleeves;
   (al) hot band kits comprising ALL of the following:
           (i) tapes;
          (ii) ties;
         (iii) adhesive cement;
          (iv) catalyst;
           (v) patches;
   (am) shafts;
   (an) gears;
   (ao) pinions;
   (ap) oil dams;
   (aq) frame structure assemblies;
   (ar) lines with fittings;
   (as) segments

STEEL RIMS OR WHEELS, TUBE TYPE TYRE, in rim sizes being EITHER of
 the following:
   (a) demountable or disc wheel rim sizes being ANY of the
       following:
         Industry Size       Imperial Size          Metric Size
                              (in inches)             (in mm)
        (i) 6.0x20              6  x20              152.4 x 508
       (ii) 6.5x20              6.5x20              165.1 x 508
      (iii) 7.0x20              7  x20              177.8 x 508
       (iv) 7.5x20              7.5x20              190.5 x 508
        (v) 8.0x20              8  x20              203.2 x 508
       (vi) 8.5x20              8.5x20              215.9 x 508
   (b) disc wheel rim sizes being ANY of the following:
        (i) 7.5x22              7.5x22              190.5 x 558.8
       (ii) 8.0x22              8  x22              203.2 x 558.8
      (iii) 8.5x22              8.5x22              215.9 x 558.8
 and having EITHER of the following features:
   (a) two piece assemblies each comprising a rim base and detachable
       spring flange;
   (b) three piece assemblies each comprising a rim base, detachable
       side ring and lock ring

WHEELS, forged aluminium, having a rim diameter exceeding 445 mm

PARTS, HUB, DUMP TRUCK, being repair kits, including ALL of the 
following:
  (a) bolts;
  (b) bearings;
  (c) plugs;
  (d) nuts;
  (e) washers

DISK WHEELS OR DEMOUNTABLE RIMS, steel, with OR without valves, 
in ANY of the following sizes:
  (a) 8.00 in x 20.00 in;
  (b) 8.50 in x 20.00 in;
  (c) 8.25 in x 22.5 in

WHEELS, steel disc centre, being a one piece assembly, for 
fitment with tubeless type tyres in rim sizes as follows:
    Industry Size         Imperial Size           Metric Size
                            (in inches)              (in mm)
  (i) 6.00 x 17.5        6.00 x 17.5             152.4  x 444.5
 (ii) 6.75 x 17.5        6.75 x 17.5             171.45 x 444.5
(iii) 7.50 x 22.5        7.50 x 22.5             190.5  x 571.5
                               OR
 STEEL RIMS, demountable, being a one piece assembly, for fitment
 with tubeless type tyres in rim sizes as follows:
    Industry Size         Imperial Size           Metric Size
                            (in inches)              (in mm)
  (i) 6.00 x 17.5        6.00 x 17.5             152.4  x 444.5
 (ii) 6.75 x 17.5        6.75 x 17.5             171.45 x 444.5

WHEELS, STEEL DISC CENTRE, being a one piece assembly, tubeless
 tyre, in rim sizes as follows:
   IMPERIAL SIZE (in inches)     METRIC SIZE (in cm)
   (a) 17.50 x 5.25              44.45 x 13.34;
   (b) 17.50 x 6.00              44.45 x 15.24;
   (c) 17.50 x 6.75              44.45 x 17.15;
   (d) 17.50 x 7.50              44.45 x 19.05;
   (e) 17.50 x 8.25              44.45 x 20.96;
   (f) 19.50 x 6.75              49.53 x 17.15;
   (g) 19.50 x 7.50              49.53 x 19.05;
   (h) 19.50 x 8.25              49.53 x 20.96;
   (i) 19.50 x 9.00              49.53 x 22.86;
   (j) 19.50 x 11.75             49.53 x 29.85;
   (k) 22.50 x 6.75              57.15 x 17.16;
   (l) 22.50 x 7.50              57.15 x 19.05;
   (m) 22.50 x 11.75             57.15 x 29.85;
   (n) 22.50 x 13.00             57.15 x 33.02;
   (o) 22.50 x 14.00             57.15 x 35.56

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
  (a) bands;
  (b) brackets;
  (c) caps;
  (d) clamps;
  (e) clips;
  (f) covers;
  (g) discs;
  (h) drums;
  (i) flanges;
  (j) hubs;
  (k) keys;
  (l) plates;
  (m) rings;
  (n) spacers;
  (o) studs;
  (p) wedges;
  (q) wheels;
  (r) yokes

WHEEL RIMS, having ALL of the following:
   (a) multiple part construction;
   (b) rim diameter greater than 508 mm;
   (c) rim width greater than 254 mm

PARTS, WHEEL RIM (DIAMETER GREATER THAN 508 mm AND A WIDTH GREATER
 THAN 254 mm), being ANY of the following:
    (a) side rings;
    (b) rim bases;
    (c) bead seat bands;
    (d) lock rings;
    (e) rim keys;
    (f) flanges;
    (g) gutter bands;
    (h) discs;
    (i) rim drivers

WHEEL DISCS, FLOW-FORMED, steel

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of the
 following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 being suspension shock absorbers, but NOT including telescopic
 shock absorbers

PARTS, OFF-HIGHWAY MINING DUMP TRUCKS, gross vehicle weight NOT 
less than 120 tonnes, being wheel spindles

PARTS, SUSPENSION, OPEN WHEEL SINGLE SEAT RACE CAR, being ANY of 
the following:
  (a) bracket, anti-roll bar;
  (b) anti-roll bar;
  (c) front link adjuster;
  (d) bracket front damper;
  (e) adjustable clevis, anti-roll bar;
  (f) rocker hub;
  (g) upper plate front rocker;
  (h) lower plate front rocker left AND/OR right;
  (i) front rocker shaft;
  (j) front lower wish bone left AND/OR right;
  (k) front push rod;
  (l) front wish bone upper;
  (m) steering rod track end;
  (n) suspension brackets;
  (o) adjuster for front push rod;
  (p) upright left and or right;
  (q) lower upright pin;
  (r) spacers front and rear suspension;
  (s) steering arm;
  (t) drive peg;
  (u) rear link adjuster;
  (v) rocker plate;
  (w) rear axle rocker;
  (x) rear lower wish bone left AND/OR right;
  (y) rear push rod;
  (z) rear upper wishbone left AND/OR right;
 (aa) adjuster upper wish bone;
 (ab) rear wish bone right left AND/OR right

PARTS, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT NOT LESS 
THAN 7.5 TONNES, being shock absorbers

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being suspension shock absorbers

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being suspension shock absorbers

SHOCK ABSORBERS, SUSPENSION, TRUCK, truck gross weight greater 
than 3.5 tonnes

PARTS, SUSPENSION STRUT, OFF HIGHWAY DUMP TRUCK, being repair 
kits including ALL of the following:
  (a) seal kit;
  (b) screws;
  (c) pressure sensor;
  (d) sticker;
  (e) valves

PARTS, SUSPENSION CYLINDER, being repair kits, including ALL of 
the following: 
  (a) steel balls;
  (b) damper;
  (c) valves;
  (d) sensor;
  (e) seal kit; 
  (f) name plate

PARTS, SUSPENSION STRUT, OFF HIGHWAY DUMP TRUCK, being repair 
kits, including ALL of the following:
  (a) steel ball;
  (b) bushing;
  (c) name-plate;
  (d) seal kit;
  (e) pressure sensor;
  (f) valves

PARTS, DUMP TRUCK SUSPENSION CYLINDER, being repair kits, 
including ALL of the following:
  (a) bushing;
  (b) seal kit;
  (c) plugs;
  (d) stopper ring;
  (e) pressure sensor;
  (f) sticker;
  (g) valves

PARTS, SUSPENSION STRUT, OFF HIGHWAY DUMP TRUCK, being repair 
kits, including ALL of the following:
  (a) bolts;
  (b) bushing;
  (c) seal kit;
  (d) plugs;
  (e) stopper ring;
  (f) pressure sensor;
  (g) sticker;
  (h) valves

PARTS, SUSPENSION STRUT, OFF HIGHWAY DUMP TRUCK, being repair 
kits, including ALL of the following:
  (a) bolts;
  (b) bushing;
  (c) seal kit;
  (d) plugs;
  (e) pressure sensor;
  (f) sticker; 
  (g) valves

PARTS, OFF HIGHWAY DUMP TRUCK, being trailing arms

PARTS, OFF-ROAD MINING TRUCK, being wheel kingpins

PARTS, OFF HIGHWAY MINING DUMP TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 120 T, being control arm assemblies

PARTS, MOTOR VEHICLE, being original equipment or reproductions 
of goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 being suspension assemblies

PARTS, ON ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS 
THAN 7.5 T, being suspension sway bars

PARTS, OFF HIGHWAY REAR DUMP TRUCK, being pneumatic struts 
having a diameter NOT less than 170 mm

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
  (a) axles;
  (b) beams;
  (c) brackets;
  (d) bumpers;
  (e) bushing;
  (f) dampers;
  (g) rods;
  (h) saddles;
  (i) studs;
  (j) tanks;
  (k) tubes;
  (l) vents;
  (m) suspension systems;
  (n) airbags;
  (o) shoes;
  (p) pads;
  (q) shims;
  (r) spacers;
  (s) cross beams;
  (t) plates;
  (u) locks

PARTS, SUSPENSION, COMMERCIAL MOTOR VEHICLE, being ANY of the
 following:
   (a) spring hangers or frame shockhangers having:
           (i) a minimum yield strength of 380 mPa;
          (ii) a minimum tensile strength of 550 mPa;
         (iii) a minimum elongation of 6%;
          (iv) a general hardness range of 187-255 BHN;
           (v) attachment load capacity NOT exceeding 60 kN;
   (b) torque rods or transverse rods having:
           (i) 3 axis with end joint connections of either taper pin
               or bar pin;
          (ii) an attachment tensile and compressive load capacity
               NOT exceeding 35 kN;
   (c) top pads or transverse rod frame brackets having:
           (i) minimum yield strength of 300 mPa;
          (ii) minimum tensile strength of 450 mPa;
         (iii) minimum elongation of 12%;
          (iv) a general hardness range of 156-217 BHN;
   (d) spring seats or axle bottom caps having:
           (i) minimum yield strength of 380 mPa;
          (ii) minimum tensile strength of 550 mPa;
         (iii) minimum elongation of 6%;
          (iv) general hardness range of 187-255 BHN;
           (v) attachment load capacity NOT exceeding 35 kN;
   (e) transverse rod axle brackets having:
           (i) minimum yield strength of 300 mPa;
          (ii) minimum tensile strength of 550 mPa;
         (iii) minimum elongation of 20%;
          (iv) a general hardness range of 156-196 BHN;
   (f) cross channels or lower shock brackets having:
           (i) minimum tensile strength of 448 mPa;
          (ii) minimum yield strength of 350 mPa

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before 16 August 1995, or reproductions of these parts, being
 radiators

PARTS, RAIL FLASH-BUTT WELDING MACHINE, being ALL of the 
following:
  (a) intercooler;
  (b) radiator;
  (c) fan AND/ OR blower;
  (d) fan motor;
  (e) reservoir tank

PARTS, COOLING ASSEMBLY, OFF HIGHWAY REAR DUMP TRUCK, being 
ANY of the following:
  (a) radiator;
  (b) aftercooler;
  (c) fan;
  (d) fan shroud;
  (e) fuel cooler;
  (f) fan guard

COOLERS, CHARGE AIR TO AIR, cast aluminium body, serpentine or plate
 fin design, vacuum brazed core matrix, working pressure NOT less
 than 24 171 kg/sq m and not exceeding 31 077 kg/sq m

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being radiators

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being radiators

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) exhaust pipes;
  (b) silencers

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
  (a) pipes;
  (b) tubes;
  (c) silencers;
  (d) mufflers;
  (e) exhausts

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being ANY of the following:
   (a) silencers;
   (b) mufflers;
   (c) exhaust pipes

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being ANY of the following:
   (a) silencers;
   (b) mufflers;
   (c) exhaust pipes

CLUTCH ASSEMBLIES AND DRIVEN PLATES, being EITHER of the following:
   (a) clutch or driven plates, being EITHER of the following:
         (i) twin plates having a dia exceeding 320 mm;
        (ii) single plate having a dia exceeding 345 mm;
   (b) cover assemblies, being assemblies for EITHER of the
       following:
         (i) twin plate applications having a pressure plate face
             dia exceeding 320 mm;
        (ii) single plate applications having a pressure plate face
             dia exceeding 345 mm

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) clutch pressure plates;
  (b) clutch driven plates

CLUTCH KITS, DUAL CLUTCH TRANSMISSIONS, including ALL of the 
following:
  (a) multi-plate clutch;
  (b) bearing securing ring;
  (c) ball stud;
  (d) fillister head bolt with multi point socket head;
  (e) engagement mounting;
  (f) engaging lever;
  (g) needle bearing

PARTS, CLUTCH OR DRIVEN PLATES OR COVERS exceeding 320 mm
 diameter, being ANY of the following:
   (a) braces;
   (b) cases;
   (c) centerings;
   (d) discs;
   (e) forks;
   (f) guides;
   (g) housings;
   (h) levers;
   (i) pins;
   (j) plates;
   (k) pressure plates;
   (l) rings;
   (m) rollers;
   (n) sleeves;
   (o) spacers;
   (p) studs;
   (q) yokes

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being clutches and clutch parts comprising ANY of the
 following:
   (a) clutches;
   (b) clutch plates;
   (c) clutch covers;
   (d) hubs;
   (e) pistons

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being clutches and clutch parts comprising ANY of the
 following:
   (a) clutches;
   (b) clutch plates;
   (c) clutch covers;
   (d) hubs;
   (e) pistons

PARTS, CLUTCH, OPEN WHEEL SINGLE SEAT RACE CAR, with OR without 
hydraulic fittings, being EITHER of the following:
  (a) clutch release bearing;
  (b) clutch release

PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following:
   (a) bearings;
   (b) braces;
   (c) brackets;
   (d) clutch brakes;
   (e) bushings;
   (f) cases;
   (g) clutches;
   (h) collars;
   (i) cones;
   (j) covers;
   (k) dipsticks;
   (l) discs;
   (m) facings;
   (n) forks;
   (o) guides;
   (p) housings;
   (q) hubs;
   (r) levers;
   (s) mounts;
   (t) pins;
   (u) pistons;
   (v) plates;
   (w) regulators;
   (x) rings;
   (y) rods;
   (z) rollers;
  (aa) sleeves;
  (ab) spacers;
  (ac) studs;
  (ad) yokes

PARTS FOR VEHICLES, being original equipment or reproductions
 of goods fitted as original equipment to vehicles having BOTH
 of the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) steering wheels;
  (b) steering columns;
  (c) steering boxes

STEERING COMPONENTS, OPEN WHEEL SINGLE SEAT RACE CAR, assembled, 
being ANY of the following:
  (a) steering wheels incorporating controls and 
      instrumentation;
  (b) steering columns;
  (c) steering boxes

PARTS, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT NOT LESS 
THAN 7.5 TONNES, being ANY of the following:
  (a) steering wheels;
  (b) steering columns;
  (c) steering boxes

STEERING BOXES, TRUCK OR BUS (FRONT AXLE RATING OF 1818 kg OR
 GREATER)

STEERING BOXES, having BOTH of the following:
   (a) steerable axle range: 2 720 kg to 9 112 kg;
   (b) pressure rating 1 200 PSI to 2 500 PSI
 Note: For the purposes of this order tolerance on specifications is
       + OR - 2%

PARTS, ARTICULATED OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, comprising ANY of the following:
   (a) steering wheels;
   (b) steering columns;
   (c) steering boxes

PARTS, RIGID FRAME OFF-HIGHWAY REAR DUMP TRUCK HAVING A GVW OF MORE
 THAN 3.5 t, being ANY of the following:
   (a) steering wheels;
   (b) steering columns;
   (c) steering boxes

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 being steering mechanisms

PARTS, STEERING COLUMN, OFF-HIGHWAY DUMP TRUCK AND/OR MINING 
TRUCK HAVING A GROSS VEHICLE WEIGHT EXCEEDING 3.5 TONNE, being 
ANY of the following:
  (a) shims;
  (b) arms;
  (c) plates;
  (d) sockets AND socket assemblies;
  (e) ball studs;
  (f) plugs;
  (g) link rods;
  (h) tie rods;
  (i) links;
  (j) shafts;
  (k) tilt levers;
  (l) pawls

PARTS, TRUCK HAVING A GROSS WEIGHT GREATER THAN 3.5 t, 
being steering components, including ANY of the following:
(a) ball sockets;  
(b) drag links; 
(c) tie rod ends;
(d) drag link ends

PARTS, STEERING, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT 
NOT LESS THAN 7.5 TONNES, being ANY of the following:
   (a) arms;
   (b) axles;
   (c) brackets;
   (d) casings;
   (e) columns;
   (f) covers;
   (g) gears;
   (h) grommets;
   (i) housings;
   (j) knuckles;
   (k) levers;
   (l) pinions;
   (m) racks;
   (n) reservoirs;
   (o) rods;
   (p) shafts;
   (q) tubes;
   (r) wheels;
   (s) linkages;
   (t) sockets;
   (u) clamps;
   (v) pins;
   (w) pawls;
   (x) horn brushes;
   (y) knobs;
   (z) shells;
  (aa) dipstick;
  (ab) plates;
  (ac) yokes;
  (ad) adaptors;
  (ae) rings;

PARTS, TRUCK OR BUS STEERING BOX (FRONT AXLE RATING OF 1818 kg OR
 GREATER), being ANY of the following:
   (a) cylinder heads;
   (b) piston rings;
   (c) output shafts;
   (d) covers;
   (e) housings;
   (f) gears;
   (g) selector shafts;
   (h) pitman arms;
   (i) cylinder head kits, comprising ALL of the following:
             (i) cylinder heads;
            (ii) seal rings;
           (iii) plugs;
   (j) mated kits, comprising ALL of the following:
             (i) pistons;
            (ii) seals;
           (iii) valves;
            (iv) springs;
             (v) pins;
            (vi) plunger relief balls;
           (vii) o-rings;
          (viii) nuts;
            (ix) plugs;
             (x) shafts;
            (xi) bearings;
           (xii) nylon balls;
   (k) bearing cap kits, comprising BOTH of the following:
             (i) plugs;
            (ii) hexagonal sockets;
   (l) plunger kits, comprising ALL of the following:
             (i) plugs;
            (ii) seals;
           (iii) o-rings;
   (m) piston ring kits, comprising BOTH of the following:
             (i) piston rings;
            (ii) o-rings;
   (n) pitman arm retaining kits, comprising BOTH of the following:
             (i) retainers;
            (ii) washers;
   (o) output shaft kits, comprising ALL of the following:
             (i) shafts;
            (ii) pins;
           (iii) o-rings;
            (iv) boots;
   (p) piston kits, comprising ALL of the following:
             (i) pistons;
            (ii) springs;
           (iii) seals;
   (q) bearing cap and shaft kits, comprising ALL of the following:
             (i) bearing caps;
            (ii) shafts;
           (iii) rings;
            (iv) washers;
             (v) o-rings;
            (vi) nuts;
           (vii) plugs;
          (viii) seals

PARTS, STEERING BOX having BOTH a steerable axle range of 2 720 kg
 to 9 112 kg and a pressure rating of of 1 200 PSI to 2 500 PSI,
 being ANY of the following:
       (a) cylinder heads;
       (b) piston rings;
       (c) output shafts;
       (d) covers;
       (e) housings;
       (f) gears;
       (g) selector shafts;
       (h) pitman arms;
       (i) cylinder head kits, comprising ALL of the following:
            (i) cylinder head;
           (ii) seal ring;
          (iii) plug,
       (j) mated kits, comprising ALL of the following:
            (i) piston;
           (ii) seal;
          (iii) valve;
           (iv) spring;
            (v) pin;
           (vi) plunger relief ball;
          (vii) o-ring;
         (viii) nut;
           (ix) plug;
            (x) shaft;
           (xi) bearing;
          (xii) nylon ball,
       (k) bearing cap kits, comprising BOTH of the following:
            (i) plug;
           (ii) hexagonal socket,
       (l) plunger kits, comprising BOTH of the following:
            (i) plunger;
           (ii) o-ring,
       (m) piston plug kits, comprising ALL of the following:
            (i) plug;
           (ii) seal;
          (iii) o-ring,
       (n) piston ring kits, comprising BOTH of the following:
            (i) piston ring;
           (ii) o-ring,
       (o) pitman arm retaining kits, comprising BOTH of the
           following:
            (i) retainer;
           (ii) washer,
       (p) output shaft kits, comprising ALL of the following:
            (i) shaft;
           (ii) pin;
          (iii) o-ring;
           (iv) boot,
       (q) piston kits, comprising ALL of the following:
            (i) piston;
           (ii) spring;
          (iii) seal,
       (r) bearing cap and shaft kits, comprising ALL of the
           following:
            (i) bearing cap;
           (ii) shaft;
          (iii) ring;
           (iv) washer;
            (v) o-ring;
           (vi) nut;
          (vii) plug;
         (viii) seal

AIRBAG MODULES, MOTOR VEHICLES HAVING A GROSS WEIGHT NOT GREATER 
THAN 3.5 TONNES, replacement, including BOTH of the following:
  (a) airbag;
  (b) inflator

AIRBAG MODULES, MOTOR VEHICLE, replacement, including BOTH of 
the following:
  (a) airbag;
  (b) inflator

COUPLINGS, trailer, automatic, with or without matching towing eyes,
 conforming to Category 3 or 4 of AS 2213-1978
   For purposes of TC 9004638 Categories 3 or 4 of AS 2213-1978
   states the goods must have a "D" value rating exceeding 9.5 t

PROPELLER SHAFT ASSEMBLIES, whether or not including companion
 flanges, having a minimum torsional strength capacity exceeding
 15 000 N m elastic limit

UNIVERSAL JOINT KITS, having a minimum torsional strength capacity
 exceeding 3 500 N.m elastic limit, comprising ANY of the following
 components:
   (a) spiders;
   (b) needle rollers;
   (c) seals;
   (d) circlips or lock plates;
   (e) lubricators

PARTS, MOTOR VEHICLE , being original equipment or reproductions 
of goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962,
 being ANY of the FOLLOWING
   (a) engine and gearbox mountings;
   (b) chassis;
   (c) heaters;
   (d) fuel tanks and fittings

LEVELLING DEVICES, VEHICLE, AIR SUSPENSION

PARTS, PROPELLER SHAFT ASSEMBLIES, having a minimum torsional
 strength capacity exceeding 15 000 Nm elastic limit, whether or
 not including companion flanges, being ANY of the following:
   (a) covers;
   (b) dust covers;
   (c) flanges;
   (d) housings;
   (e) joints;
   (f) keys;
   (g) rings;
   (h) shafts;
   (i) sleeves;
   (j) slingers;
   (k) spacers;
   (l) spider kits;
   (m) spiders;
   (n) supports bearings comprising:
          (i) sealing ring;
         (ii) ball bearing;
        (iii) ring;
         (iv) lubricating nipple;
          (v) clamp (housing);
   (o) supports;
   (p) tubes;
   (q) yokes

SUN SHADES, WIRE FRAMED, MOTOR VEHICLE

STEERING WHEEL COVERS, of artificial plastic OR a combination of
 artificial plastic and rubber

TOW BALL COVERS

FUEL CELLS, motorsport, being EITHER of the following:
   (a) bladder constructed of cross linked polyethylene, with OR
       without foam baffling OR encasing container;
   (b) rigid cell constructed of cross linked polyethylene with OR
       without foam baffling

FUEL CELLS, MOTORSPORT, being EITHER of the following:
  (a) bladder of woven polyamide or polyester fabric, impregnated and
      coated with a fuel resistant elastomer, bladder imported with
      or without encapsulating cell;
  (b) rigid tank of cross linked polymers of polyurathane

PARTS, FINAL DRIVE, OFF HIGHWAY DUMP TRUCK, being repair kits, 
including ALL of the following:
  (a) bolts;	
  (b) bearings;	
  (c) clips;
  (d) corks;
  (e) filter;
  (f) hoses;
  (g) o-rings;
  (h) stopper pin;
  (i) group seal;
  (j) tees

CONVERSION KITS, DUMP TRUCK WHEEL DRIVE, including ALL of the 
following:
  (a) adapters;
  (b) contact discs;
  (c) mounting AND/OR support flanges;
  (d) brake;
  (e) O-rings AND/OR spacer rings;
  (f) encoders;
  (g) print package;
  (h) seals;
  (i) holders;
  (j) covers AND/OR cover plates;
  (k) inner wheels;
  (l) roller bearings;
  (m) clutch shaft;
  (n) shims;
  (o) planets;
  (p) planetary bolts;
  (q) planetary carriers;
  (r) wheel bolts;
  (s) ball bearings;
  (t) discs;
  (u) hex head screws;
  (v) retaining rings;
  (w) sun wheels;
  (x) tension pins;
  (y) plug screws;
  (z) socket screws

PARTS, FINAL DRIVE, OFF HIGHWAY REAR DUMP TRUCK, being repair 
kits, comprising ALL of the following: 
  (a) o-rings; 
  (b) bolts;
  (c) corks;
  (d) hoses; 
  (e) bearings; 
  (f) u-ring packings; 
  (g) seal rings;
  (h) wearings; 
  (i) back-up rings;
  (j) springs; 
  (k) split pins;
  (l) group seals; 
  (m) washers; 
  (n) clips; 
  (o) plates;
  (p) sleeves; 
  (q) lock plate; 
  (r) filter

PARTS, RAIL WELDER, being fixed arms

PARTS, ALL TERRAIN VEHICLE, being drive shafts

PARTS, OFF HIGHWAY DUMP TRUCK HAVING A GROSS VEHICLE WEIGHT 
GREATER THAN 150 t, being wheel drives

WHEEL DRIVE KIT, including ALL of the following:
  (a) carrier axle;
  (b) distance ring;
  (c) O-ring;
  (d) parallel pin

PARTS AND ACCESSORIES, TRUCKS HAVING A GROSS VEHICLE WEIGHT 
GREATER THAN 3.5 TONNES, being truck mountable power take off 
having ANY of the following:
  (a) hydraulically actuated;
  (b) pneumatically actuated;
  (c) electrically actuated;
  (d) manually actuated

POWER TAKE OFF UNITS, having a torque capacity NOT less than 
200 Nm, being ANY of the following:
  (a) live drive;
  (b) sliding gear AND/OR sleeve;
  (c) hot shift

SHADES, MOTOR VEHICLE WINDOW, having ALL the following:
   (a) length adjuster;
   (b) suction cups;
   (c) position lock

PARTS, TRUCKS HAVING A GROSS VEHICLE WEIGHT EXCEEDING 3.5 
TONNES, being electronic shift levers with OR without printed 
material

PARTS, TRUCKS HAVING A GROSS VEHICLE WEIGHT EXCEEDING 3.5 
TONNES, being electronic gear shift levers with OR without ONE 
OR MORE of the following:
  (a) lubricant;
  (b) terminals;
  (c) wire harnesses;
  (d) jumper harnesses;
  (e) spacers;
  (f) fasteners;
  (g) labels;
  (h) instructions

PARTS, TRUCKS HAVING A GROSS VEHICLE WEIGHT GREATER THAN 3.5 
TONNES, being fifth wheel couplings

PARTS, TRUCKS HAVING A GROSS VEHICLE WEIGHT GREATER THAN 3.5 
TONNES, being hydraulic retarders

PARTS, OFF HIGHWAY DUMP TRUCK HAVING A GROSS VEHICLE WEIGHT 
GREATER THAN 150 t, being wheel hub assemblies including ALL of 
the following:
  (a) wheel hub;
  (b) spindles AND/OR stub axles;
  (c) kingpin,
with OR without brake assemblies including ALL of the following:
     (i) brake disc;
    (ii) callipers;
   (iii) flange

PARTS, PEDAL BOX, OPEN WHEEL SINGLE SEAT RACE CAR, being ANY of 
the following:
  (a) pedal box shafts; 
  (b) pedal sleave nuts;
  (c) clutch pedal rest;
  (d) brake pedal rests;
  (e) throttle pedal rests;
  (f) master cylinder rod prolongators;
  (g) short spacer pedal stops;
  (h) short pedal stop rests;
  (i) long pedal stop rests;
  (j) brake bias controls;
  (k) sleave nut brake bias;
  (l) brake bias cables;
  (m) spacer brake bias adjusters;
  (n) foot wedges;
  (o) pedal board supports;
  (p) clutch pedals;
  (q) brake pedals;
  (r) throttle pedals;
  (s) spacer throttle pedals;
  (t) throttle cable fixing;
  (u) cable clamps;
  (v) accelerator cables;
  (w) pedal stops;
  (x) long spacer pedal stops;
  (y) clutch pedal fork ends;
  (z) throttle pedal front stop

PARTS, MONOCOQUE CHASSIS, OPEN WHEEL SINGLE SEAT RACE CAR, being 
ANY of the following:
  (a) front crash box;
  (b) nose cap;
  (c) rear crash box;
  (d) rear roll hoop;
  (e) bell house;
  (f) wheel tethers; 
  (g) head restraint;
  (h) bracket front crash box;
  (i) dowels front crash box;
  (j) rear jack plate;
  (k) rear crash box bushes;
  (l) extinguisher AND battery cover plate;
  (m) fuel tank accessories cover plate;
  (n) monocoque tub

PARTS, TRANSER CASE, OFF-HIGHWAY DUMP TRUCK OR MINING TRUCK 
EXCEEDING 3.5 TONNE GROSS VEHICLE WEIGHT, being ANY of the 
following:
  (a) transfer cases;
  (b) covers;
  (c) tube and tube assemblies;
  (d) gears;
  (e) shims;
  (f) carriers;
  (g) housings;
  (h) yokes

PARTS, TORQUE CONVERTER, OFF-HIGHWAY DUMP TRUCK AND/OR MINING 
TRUCK HAVING A GROSS VEHICLE WEIGHT EXCEEDING 3.5 TONNE, being 
ANY of the following:
  (a) covers;
  (b) carriers;
  (c) clutch plates;
  (d) friction discs;
  (e) guards;
  (f) housings;
  (g) hubs;
  (h) impellers;
  (i) distributors, oil;
  (j) pilot assemblies;
  (k) pistons;
  (l) retainers;
  (m) retainer plates;
  (n) rotors;
  (o) stators;
  (p) supports;
  (q) turbines;
  (r) yokes;
  (s) shafts;
  (t) gears;
  (u) tube and tube assemblies

PARTS, DIFFERENTIAL ASSEMBLY, OFF-HIGHWAY DUMP TRUCK OR MINING 
TRUCK HAVING A GROSS VEHICLE WEIGHT EXCEEDING 3.5 TONNE, being 
ANY of the following:
  (a) differentials;
  (b) carriers;
  (c) oil pans;
  (d) covers;
  (e) gears;
  (f) plates;
  (g) bracket assemblies;
  (h) tubes AND tube assemblies;
  (i) shims;
  (j) housings;
  (k) hubs;
  (l) shafts

PARTS, OFF HIGHWAY DUMP TRUCK AND/OR MINING TRUCK HAVING A GROSS 
VEHICLE WEIGHT EXCEEDING 3.5 TONNE, being EITHER of the 
following:
  (a) torque converters;
  (b) torque converter assemblies having ALL of the following:
          (i) gear pumps;
         (ii) valves;
        (iii) manifolds

PARTS AND ACCESSORIES, ON-ROAD TRUCKS having a gross vehicle 
weight NOT less than 7.5 tonnes, NOT being body parts, being ANY 
of the following:
  (a)  adaptors;
  (b)  angles;
  (c)  arms;
  (d)  braces;
  (e)  brackets;
  (f)  bushings;
  (g)  carriers;
  (h)  covers;
  (i)  crossmembers;
  (j)  cylinders;
  (k)  frames;
  (l)  guards;
  (m)  gussets;
  (n)  housings;
  (o)  isolators;
  (p)  mountings AND mounts;
  (q)  panels;
  (r)  pedals;
  (s)  pipes;
  (t)  plates;
  (u)  reservoirs;
  (v)  rods;
  (w)  shafts;
  (x)  shields;
  (y)  stepwells;
  (z)  straps;
 (aa)  supports;
 (ab)  tanks;
 (ac)  tubes

PARTS, OFF HIGHWAY REAR DUMP TRUCK, being drive groups having 3 
V-belt pulley and tensioner

TORQUE CONVERTERS, OFF HIGHWAY REAR DUMP TRUCK, having ALL of 
the following: 
  (a) lock-up clutch;
  (b) stall torque NOT greater than 6 170 Nm; 
  (c) cast housing;
  (d) 2 section gear pump

PARTS, OFF HIGHWAY DUMP TRUCK HAVING A GROSS VEHICLE WEIGHT 
GREATER THAN 150 t, being wheel hubs fitted with stub axles

CAMPERS, TRAY BACK UTLITY, comprising ALL of the following:
  (a) fibreglass shells;
  (b) cupboards;
  (c) water tanks;
  (d) wind up legs

SUNSHADES, MOTOR VEHICLE WINDOW

KITS, OVERHAUL OR REBUILD, TRANSMISSION, comprising ALL of the 
following:
  (a) bearings;
  (b) oil seals;
  (c) snap rings;
  (d) gaskets

FINAL DRIVES, OFF-HIGHWAY REAR DUMP TRUCK (GVW greater then 3.5 t)

SHADES, MOTOR VEHICLE WINDOW, having ALL the following:
   (a) length adjuster;
   (b) suction cups;
   (c) position lock

STORAGE BOXES, MOTOR VEHICLE ROOF

TRACTORS, towing, ride-on, battery powered, having a drawbar pull
 NOT less than 110 kg and NOT exceeding 1 250 kg

TRANSPORTERS, electric modular, having EITHER of the following:
  (a) half-ring AND rack carrier, including ALL of the following:
           (i) loading capacity NOT less than 90 tonnes;
          (ii) empty weight NOT less than 32 tonnes;
         (iii) length NOT less than 25 metres;
          (iv) NOT less than sixteen wheels
  (b) maintenance AND culvert carrier, including ALL of the 
      following:
           (i) loading capacity NOT less than 34 tonnes;
          (ii) empty weight NOT less than 19 tonnes;
         (iii) length NOT less than 16 metres;
          (iv) NOT less than eight wheels;
           (v) loaded speed capability on 0% slope NOT greater 
               than 18 km/h

TRACTORS, TOWING, battery powered, stand-on, including ALL of 
the following:
  (a) drawbar pull NOT greater than 1 150 N; 
  (b) travel speed without load NOT less than 11 km/h;
  (c) wheelbase length NOT greater than 1 319 mm;
  (d) loading capacity NOT greater than 5 000 kg

SHUTTLE CARTS, PAPER ROLLS, programmable logic controlled, 
including ALL of the following:
  (a) carrying load capacity NOT less than 4 500 kg;
  (b) roll support;
  (c) battery operated;
  (d) travel speed unloaded NOT less than 
      0.3 metres per second;  
  (e) optical track guidance

TOWING TRACTORS, rider seated, electric, having ALL of the 
following:
  (a) drawbar pull NOT greater than 25 100 N;
  (b) towed weight NOT greater than 27 000 kg;
  (c) travel speed NOT greater than 25 km/h

TROLLEYS, self-propelled, electro-hydraulic, remote controlled, 
including ALL of the following:
  (a) rated load capacity NOT greater than 75 metric tonnes;
  (b) platform width NOT greater than 3 metres;
  (c) platform length NOT less than 8 metres

TRACTORS, TOWING, ride-on, battery operated, having a tractive 
effort NOT less than 550 daN and NOT greater than 1 800 daN

AUTOMATED GUIDED VEHICLES, electric powered, programmable logic 
controlled, laser guided, having BOTH of the following:
  (a) maximum carrying capacity NOT less than 6.4 t;
  (b) rechargeable electric vehicle batteries

TRACTORS, towing, ride-on, having a drawbar pull of NOT less than
 1 900 kg and NOT exceeding 5 000 kg

TERMINAL TRACTORS, OFF-HIGHWAY, having ALL the following:
   (a) 2 or 4 wheel drive;
   (b) single person cabin;
   (c) MINIMUM lift capacity of 25 tonnes;
   (d) fixed rear axle mounting

TRANSPORTERS, MODULAR, self propelled, remote controlled, having 
ALL of the following:
  (a) diesel engine;
  (b) payload capacity NOT less than 84 tonnes;
  (c) gross weight NOT less than 96 tonnes;
  (d) platform length NOT less than 6 metres;
  (e) platform width NOT less than 2.4 metres

TRANSPORTERS, POTSHELL, having ALL of the following:
  (a) diesel engine;
  (b) cabin;
  (c) NOT less than 12 wheel bogies;
  (d) payload capacity NOT greater than 160 t

SEGMENT TRANSPORT VEHICLES, having ALL of the following:  
  (a) diesel engine;
  (b) hydraulic unit;
  (c) corner jacks

TUNNEL LOW CARRIERS, with OR without cabins AND/OR telescopic 
cranes

TRANSPORTERS, self propelled, remote controlled

TRANSPORTERS, MODULAR, SELF PROPELLED, having ALL of the 
following:
  (a) power packs;
  (b) single axle load NOT greater than 65 tonnes;
  (c) remote control

TRACTORS, TOWING, ride-on, having a draw bar pull capacity
exceeding 5 000 kg

MOTORCYCLES, electric motor propulsion, including ALL of the 
following:
  (a) engine power NOT less than 350 W and NOT greater than 
      2 500 W;
  (b) maximum speed NOT greater than 50 km/h:
  (c) rider weight NOT greater than 60 kg;
  (d) seat height NOT less than 450 mm and NOT greater than 
      690 mm

SCOOTERS, stand on, including ALL of the following:
  (a) electric motor;
  (b) hand operated rear brake;
  (c) stand on footboard

SCOOTERS, electric, with removable seat

BICYCLES

UNICYCLES

BICYCLES, NOVELTY, having BOTH of the following:
   (a) 7 seats;
   (b) 3 or 4 wheels

BICYCLES

EXHAUSTS, MOTORCROSS, 2 and 4 stroke

PIPES, EXPANSION CHAMBER, MOTORCROSS, 2 and 4 stroke

PARTS for bicycle frames and forks, being ANY of the following:
   (a) butted, high alloy steel parts, being tubes, forks or
       stays having a length NOT exceeding 700 mm;
   (b) lugs;
   (c) front or rear end tips, forged;
   (d) bottom bracket shells;
   (e) fork crowns or steerers;
   (f) bridges;
   (g) bridge reinforcements;
   (h) fork blade reinforcement plates,
 but NOT including parts made from titanium, titanium alloy,
 aluminium or aluminium alloy

FORKS, BICYCLE, FRONT SUSPENSION, with removable steering tube,
 being EITHER of the following:
   (a) oil dampened AND air sprung;
   (b) elastomer AND spring shock absorbing

FRAMES, BICYCLE, with OR without forks

PARTS, being bicycle frames consisting of EITHER of the 
following:
  (a) carbon fibre;
  (b) aluminium

FORKS, SUSPENSION, BICYCLE

TRAILERS, AGRICULTURE, self unloading, having ALL of the 
following:
  (a) twin axle; 
  (b) NOT less than 2 hydraulic rods;
  (c) total load volume NOT greater than 34 m3

TRAILERS, LOADING AND STACKING AND UNLOADING, BALE, electronic 
control, having ALL of the following:
  (a) floating AND/OR adjustable bale pick-up system;
  (b) hydraulic operated system;
  (c) parking brake;
  (d) roller floor;
  (e) loading platform;
  (f) bale pusher;
  (g) trailer bed side panels

TRAILERS, SELF LOADING AND SELF UNLOADING, ROUND BALE, 
driver operated, having ALL of the following:
  (a) braking mechanism;
  (b) NOT less than 8 bale adjustable load space;
  (c) length NOT less than 8 metres

TRAILERS, LOADING AND STACKING AND UNLOADING, BALE, 
electronic control, power take-off, centre towing, with OR 
without bale pressing AND/OR knotting chamber, having ALL of the 
following:
  (a) maximum speed NOT less than 40 kilometres per hour;
  (b) floating AND/OR adjustable bale pick-up system;
  (c) hydraulic operated system;
  (d) hydraulic AND/OR braking system;
  (e) hydraulic suspension;
  (f) parking brake;
  (g) dual axle;
  (h) rear steering;
  (i) roller floor;
  (j) hydraulic loading elevator;
  (k) bale pusher;
  (l) hydraulic side stacking frames;
  (m) load capacity NOT less than 12 bales;
  (n) automated bale loader

TRAILERS, spreader, including ALL of the following: 
  (a) hydraulic load distribution;
  (b) hydrostatic suspension;
  (c) two sided scraper floor drive, having one OR more 
      gearbox;
  (d) electromagnetic scraper floor adjustment;
  (e) gross loaded weight NOT less than 16 tonnes and NOT 
      greater than 34 tonnes;
  (f) discharge load capacity NOT less than 16 cubic metres and  
      NOT greater than 34 cubic meters,
with OR without ANY of the following:
      (i)   integrated weighing system;
      (ii)  roller chain milling drive unit;
      (iii) cardan drive shaft

TRAILERS, SELF-LOADING AND SELF-UNLOADING, AGRICULTURAL, 
including ALL of the following:
  (a) single load carrying compartment;
  (b) crop choppers;
  (c) floor scraper and conveyor;
  (d) rear hydraulic crop load discharger

TRAILERS, AGRICULTURAL, SELF UN-LOADING, comprising ALL of the
 following:
    (a) multi-compartment aluminium tank;
    (b) internal belly mounted paddle chain or auger conveyor;
    (c) pneumatic discharge

TANKERS, PNEUMATIC DRY BULK, aluminium, bottom discharge OR 
tipping, having all of the following:
  (a) manual OR air operated hatch covers;
  (b) frame bolted suspension hangers;
  (c) volume capacity NOT less than 24 m3 and NOT greater than 
      67 m3;
  (d) tandem axle OR tri-axle OR quad axle

NURSE TANKERS, LIQUIFIED GAS, semi-trailer

TANKERS, LIQUIFIED GAS, B-double trailer

TRAILERS, STORAGE, SAND FEEDING, having ALL of the following:
  (a) NOT less than 4 storage compartments;
  (b) each storage compartment volume capacity greater than 16 
      cubic meters;
  (c) diesel operated hydraulic pump;
  (d) maximum discharge rate NOT less than 85 litres per second;
  (e) conveyor belt discharger

TANKERS, TRAILER, CRYOGENIC, LIQUEFIED GAS

TRANSPORTATION DOLLIES, GAS TURBINE

TRAILERS, PLATFORM, having ALL of the following:
  (a) trailer length NOT greater than 4 m;
  (b) trailer height NOT greater than 0.9 m;
  (c) NOT more than 2 axles;
  (d) payload capacity NOT less than 10 t;
  (e) solid rubber tyres

TRAILERS, ROLL ON/ROLL OFF CASSETTE, having a maximum load 
capacity NOT less than 80 tonnes

TRAILERS, PLATFORM, modular, having ALL of the following:
  (a) hydraulic suspension;
  (b) pendular axle having a maximum steering angle NOT less 
      than 55 degrees;
  (c) axle load NOT less than 45 t at 1 km/h;
  (d) NOT less than 2 axles and NOT greater than 8 axles;
  (e) width NOT less than 3 m

TRAILERS, GRINDING MILL, having ALL of the following:
  (a) solid rubber tyres;
  (b) gross vehicle weight NOT less than 3 700 kg with settings
      installed;
  (c) maximum payload NOT less than 10 tonnes at back axle

SHEILD TRAILERS, UNDERGROUND

TRAILERS, LIVE CHICKEN TRANSPORT, temperature controlled, 
enclosed, having ALL of the following:
  (a) air conditioning;
  (b) blowers;
  (c) sensors;
  (d) storage capacity NOT greater than 183 600 day old chicks;
  (e) tailgate lift having a lifting capacity NOT less than 
      2 000 kg;
  (f) generator;
  (g) battery pack;
  (h) thermoelectric cooler

TRAILERS, CONCRETE PANEL TRANSPORTING, including ALL of the 
following:
  (a) NOT less than 3 axles;
  (b) concrete panel loader AND unloader;
  (c) trailer width NOT greater than 2 500 mm;
  (d) load restraint hydraulic clamps

TRAILER, PRECAST CONCRETE INLOADER, having ALL of the following:
  (a) three axles;
  (b) self-loading AND unloading;
  (c) width NOT greater than 2 480 mm;
  (d) base height NOT greater than 360 mm;
  (e) load restraint hydraulic clamping system

TRAILERS, aluminium alloy, single shell, having ALL of the 
following:
  (a) double welded construction;
  (b) maximum aluminium tensile strength exceeding 35 000 psi;
  (c) double-wall extruded panels with OR without routed air OR 
      electrical lines

TRAILERS, LIVE CHICKEN TRANSPORT, enclosed, having ALL of the 
following:
  (a) air conditioning;
  (b) blowers;
  (c) temperature sensors;
  (d) humidity sensor;  
  (e) carbon dioxide level sensors;
  (f) storage capacity NOT greater than 140 000 day old chicks;
  (g) water cooled diesel generator having a power NOT less than 
      56 kW at 70 kVA;
  (h) fumigation system;
  (i) tailgate loader having a lifting capacity NOT less than 
      2 000 kg; 
  (j) servo drive fresh air inlet;
  (k) glycol heaters having BOTH of the following:
        (i) NOT less than 400 V;
       (ii) NOT less than 24 kW total output at 440 V,
  (l) glycol coolers having a cooling condenser capacity NOT 
      less than 98 kW;
  (m) combined blower capacity NOT less than 30 000 
      cubic meters per hour

TIPPING TRAILERS, double OR triple axle, including ALL of the 
following:
  (a) abrasion resistant steel body with Brinell hardness NOT
      less than 470 and NOT greater than 530;
  (b) with OR without hydraulic axle suspension;
  (c) with OR without double self-steering axles;
  (d) hydraulic OR air brakes;
  (e) maximum load capacity NOT less than 27 t;
  (f) length NOT greater than 7.50 m;
  (g) width NOT greater than 2.55 m;
  (h) height NOT greater than 2.20 m

SLIPWAY TRAILERS, hydraulic, submersible, including ALL of the 
following:
  (a) length NOT less than 5 m and NOT greater than 40 m;
  (b) load capacity NOT less than 15 t and NOT greater than
      150 t;
  (c) hydraulic lift system;
  (d) hot dipped galvanised frame;
  (e) hydraulic steering drawbar with telescopic extension

TRAILERS, ROLL-ON/ROLL-OFF, with OR without rocker axle 
assembly, having ALL of the following:
  (a) payload capacity NOT less than 90 t;
  (b) platform height NOT greater than 800 mm;
  (c) platform width NOT less than 2 600 mm;
  (d) platform length NOT less than 12 500 mm;
  (e) gooseneck tunnel coupling

TRAILERS, PLATFORM, MODULAR, having ALL of the following:
  (a) hydraulic suspension and steering;
  (b) NOT less than 8 axle line rows;
  (c) platform lengths NOT less than 3 metres

TRAILERS, BICYCLE, comprising ALL of the following:
   (a) two pneumatic wheels of either 16 inches or 20 inches
       (nominally 40.6 cm or 50.8 cm);
   (b) seating for up to two children;
   (c) load capacity of either 60 lbs or 100 lbs (nominally 27.24 kg
       or 45.4 kg);
   (d) 3/4 inch or 1 inch (nominally 1.9 cm or 2.5 cm) aluminium
       tubing frame;
   (e) cover constructed of waterproof double coated nylon pack
       cloth;
   (f) 6 ft (nominally 1.8 m) attached pole with safety flag;
   (g) optional stroller conversion kit consisting of ALL of the
       following:
           (i) retractable front wheel;
          (ii) detachable push handle with around-the-wrist safety
               strap;
         (iii) parking brake

CARTS, BEVERAGE VENDING, TRAILER MOUNTED

SEMI TRAILERS, expandable sides, stabilising legs, workstations

BICYCLE TRAILER, being ALL of the following:
  (a) fork and quick release skewer;
  (b) trailer body; 
  (c) mudguard;
  (d) safety flag;
  (e) wheel

CARTS, BEVERAGE VENDING, TRAILER MOUNTED

TROLLEYS, manually propelled, approved under Commonwealth of
 Australia Department of Transport and Communications Air
 Navigation Orders, for the provisions of in-flight service in
 passenger carrying aircraft

TROLLEY RACKS, roll in AND/OR rollout, having BOTH of the 
following:
  (a) eight wheels;
  (b) retractable handles

ROLLERS OR SKATES, LOAD TRANSPORT, having ALL of the following:
   (a) length NOT exceeding 1 300 mm;
   (b) width NOT exceeding 1 200 mm;
   (c) height NOT exceeding 300 mm;
   (d) load capacity 1 000 kg OR greater;
   (e) maximum net weight NOT exceeding 1 300 kg

TROLLEY, LUGGAGE, FOLDING, having BOTH of the following:
   (a) a weight NOT exceeding 5.2 kg;
   (b) a thickness, when folded, NOT exceeding 57 mm

TROLLEYS, steel bracket (adjustable in length), fitted with wheels
 and friction pads, placed underneath appliances for easy moving

CARTS, hose, two wheels, having a weight NOT exceeding 2 kg

LUGGAGE TROLLEY, collapsible, having a weight NOT exceeding
 4.8 kg

TROLLEY BOXES, collapsible, having ALL of the following:
   (a) retractable metal handle;
   (b) plastic storage box;
   (c) weight NOT exceeding 4 kg

TROLLEYS, CARTON AND/OR CASE PACKING FORMAT AND/OR CHANGE PARTS, 
with OR without storage containers

FOOD DELIVERY TROLLEYS, heated AND/OR chilled, polyurethane 
insulation

TROLLEYS, CHEESE MOULDING HEAD, castor wheels

MAINTENANCE DOLLY, GAS TURBINE, having ALL of the following:
  (a) foldable running boards;
  (b) 6 castor wheels;  
  (c) triangle draw bar

TROLLEYS, MEAL DELIVERY, having ALL of the following:
  (a) acrylonitrile butadiene styrene plastic external
      walls;
  (b) polyurethane foam insulation;
  (c) welded stainless steel inner container

TROLLEYS, MEAL DELIVERY, having ALL of the following:
  (a) acrylonitrile butadiene styrene plastic external 
      walls;
  (b) polyurethane foam insulation;
  (c) welded aluminium inner container;
  (d) convection heating unit

AIRCRAFT SUPPORTS, being wheeled aluminium frames

TRANSPORTERS, MEDICAL, being ANY of the following:
  (a) operating table top OR table column shuttles;
  (b) cleaning shuttles;
  (c) component transport carts;
  (d) spinal cord positioning trolleys;
  (e) docking trolleys

TROLLEYS, HELICOPTER MOVING

WHEELCHAIRS, WAREHOUSE STORAGE GRID TRACK, manually operated, 
including ALL of the following:
  (a) multi-directional wheels;
  (b) grid guide lever;
  (c) chair incorporating a safety belt;
  (d) fixed AND/OR raisable wheels

TROLLEYS, LAUNDRY BASKET CARRYING, foldable, including NOT less 
than four wheels

BUGGIES, GOLF, non-motorised

JACKS, VEHICLE POSITIONER, hydraulic

TROLLEYS, WELDING EQUIPMENT, whether OR not assembled

TROLLEYS, MEAL DELIVERY, refrigerated, stainless steel

TROLLEYS, MEAL DELIVERY, heated, stainless steel

TROLLEYS, HOUSEKEEPING, with plastic or textile bags

TRANSPORTERS, EXCAVATOR AND/OR SHOVEL LOADER

TROLLEYS, A-FRAME, GLASS TRANSPORT

TROLLEYS, BANQUET, stainless steel, having a handling capacity 
NOT greater than 122 dinner plates

TROLLEYS, manual lifting, portable, having BOTH of the following:
  (a) lifting capacity NOT greater than 125 kg;
  (b) lifting height NOT greater than 105 cm

TROLLEYS, SOILED LINEN

TROLLEYS, DELIVERY AND/OR DISPENSING, stainless steel, whether 
or not insulated, but NOT including open rack trolleys

CREEPERS, GARAGE

CARTS, GARDEN, plastic, having BOTH of the following:
  (a) NOT less than 2 wheels;
  (b) one handle

TROLLEYS, HAND, comprising ALL of the following: 
  (a) lifting capacity NOT less than 200 kg;      
  (b) tubular frame incorporating lifting handle;
  (c) steel frame width NOT greater than 40 cm;   
  (d) pneumatic tyres with rubber inner tube

TROLLEYS, SHOPPING AND/OR AIRPORT AND/OR MATERIALS HANDLING

TROLLEYS, two wheeled, incorporating a retractable handle

ROLL CAGES, NESTING

ROLL CAGES, tubular high tensile steel, collapsible, having a load
 capacity NOT greater than 500 kg

TROLLEYS, two wheeled, collapsible, incorporating a textile or
 plastic bag

TROLLEY BOXES, collapsible, having ALL of the following:
   (a) retractable metal handle;
   (b) plastic storage box;
   (c) weight NOT exceeding 4 kg

COUPLINGS, trailer, draw bar, automatic, conforming to Category
 3 or 4 of AS 2213-1978
 For the purposes of TC 9207084 Categories 3 or 4 of AS 2213-1978
 states the goods must have a "D" value rating exceeding 9.5 t

AXLES, self tracking trailer steer

BEARING PROTECTOR, WHEEL END, plastic moulded, having BOTH of the
 following:
   (a) lubricant refill grease nipple;
   (b) spring operated pressure regulator

SEAL CARRIERS, TRAILER AXLE, two piece, having a minimum cross
 section diameter of 90 mm

PARTS, DRAW BAR TRAILER COUPLINGS conforming to category 3 OR 4
 of AS2213-1978, being ANY of the following:
   (a) coupling shafts;
   (b) top bushes;
   (c) coupling bodies;
   (d) safety catches;
   (e) bottom bushes;
   (f) locking levers;
   (g) handles;
   (h) coupling bolts;
   (i) wearing plates;
   (j) shaft guides;
   (k) toe eyes;
   (l) toe eye bushes;
   (m) rebuild kits, comprising ALL of the following:
         (i) coupling bolt;
        (ii) locking spring;
       (iii) top bush;
        (iv) bottom bush;
         (v) wearing plate;
        (vi) split pin

ACTUATORS, SPRING BRAKE, TRAILER

SLACK ADJUSTERS, BRAKE, TRAILER

SHOCK ABSORBERS, TRAILER AIR SUSPENSION, having ALL of the
 following specifications:
   (a) damping force of 10 200 newtons, or greater, at an extended
       position of 0.52 metres per second;
   (b) high ambient temperature 40 degree C minimum;
   (c) compressed length NOT more than 475 mm;
   (d) open length NOT more than 800 mm

HANDLES OR HANDLE WEDGES, WHEELBARROW, wooden

TRAILER AXLES, 9 T capacity at 105 kph, having ten stud hubs with
 335 mm bolt circle diameter, fitted with air disc brakes

CLAMPING PLATE, wheel

KING PIN ASSEMBLY, comprising a king pin, base plate and eight (8)
 studs, conforming to AS 2175-1990, capable of connecting a
 trailer to a prime mover via the fifth wheel (turntable)

PARTS, SELF STEERING AXLE DAMPER KIT, TRAILER, Having a gross 
weight NOT less than 6.5 Tonnes, having 5 OR more of the 
following:
  (a) steering damper;
  (b) clamp;
  (c) washers;
  (d) screws;
  (e) one OR more plates;
  (f) lock nuts;
  (g) support for steering damper

PARTS, STEER AXLE, being steering pivots

PARTS, STEER AXLE, being lock cylinders

PARTS, TRAILER, having a gross weight NOT less than 6.5 tonnes,
being steering bolt bearing repair kits, consisting ALL of the 
following:
  (a) bushes;
  (b) steering pivots;
  (c) washers;
  (d) sealing rings;
  (e) pressure springs;
  (f) roll pins;
  (g) grease nipples

PARTS, SETTER TROLLEYS, being ANY of the following: 
  (a) top frames;
  (b) bottom frames;
  (c) parallel strips;
  (d) inside frames;
  (e) outside frames;
  (f) cross profiles;
  (g) angle profiles;
  (h) platforms;
  (i) support plates;
  (j) mounting strips;
  (k) end plates;
  (l) spacer plates;
  (m) guiding blocks;
  (n) guiding profiles;
  (o) blocking strips;
  (p) handgrips

BUSHES, TRAILING ARM, having a combination of steel AND rubber 
AND steel

PARTS, TRAILER HAVING A GROSS WEIGHT NOT LESS THAN 7.5 TONNES, 
being air suspension hanger brackets

PARTS, AIR SUSPENSION, TRAILER HAVING A GROSS WEIGHT NOT LESS 
THAN 7.5 TONNES, being spring pads

PARTS, TRAILER HAVING A GROSS WEIGHT NOT LESS THAN 7.5 TONNES, 
being anti-lock braking system installation kits consisting of  
ANY four OR more of following: 
  (a) locking bolts;
  (b) sealing plugs;
  (c) sensor brackets;
  (d) exciter AND/OR pole rings;
  (e) sensors;
  (f) bushes;
  (g) supports;
  (h) head protection plates

PARTS, DISC  BRAKE CALIPER, TRAILER HAVING A GROSS WEIGHT NOT 
LESS THAN 7.5 T, being ANY of the following:
  (a) guide pin kits consisting NOT less than three of the
      following:
           (i) bushes;
          (ii) cylinder head screws;
         (iii) guide sleeve;
          (iv) cap;
           (v) seal repair kits;
          (vi) grease;
         (vii) guide pins;
        (viii) guide bushes;
          (ix) bellow;
           (x) ring;
          (xi) o ring;
         (xii) sealing cap,
  (b) seal repair kits for guide pins consisting NOT less than
      three of the following: 
           (i) sealing cap;
          (ii) bellow;
         (iii) o ring;
          (iv) ring;
           (v) plug;
          (vi) grease,
  (c) tappet kits consisting NOT less than three of the
      following:
           (i) tappet;
          (ii) bellow;
         (iii) holding clamp;
          (iv) dirt seal,
  (d) bellow with metal back plate

PARTS, CARAVAN AND/OR RECREATIONAL VEHICLE, being water 
heater external access doors, including ALL of the following:
  (a) doors;
  (b) door frames;
  (c) vents;
  (d) door dimension NOT greater than of 380 mm x 380 mm

PARTS, TRAILER DRUM BRAKE, being camshafts

PARTS, BICYCLE TRAILER, being ALL of the following:
  (a) fork and quick release skewer;
  (b) trailer body; 
  (c) mudguard;
  (d) safety flag

PARTS, TRAILER AXLE ASSEMBLY HAVING A GROSS VEHICLE WEIGHT NOT 
LESS THAN 7.5 TONNE, being ANY of the following:
  (a) axle beams;  
  (b) axle booster brackets;
  (c) brake shoes OR brake pads;
  (d) drums;
  (e) hub caps;
  (f) hub spiders;
  (g) hubs;
  (h) axle plates;
  (i) rotors;
  (j) seal carriers, with OR without O-rings;
  (k) thrust hub rings, with OR without lip seals OR O-rings;
  (l) brake pad kits, consisting of BOTH of the following:
          (i) brake pads;
         (ii) NOT less than 2 of ANY of the following:
                 (1) retention clips OR locks;
                 (2) washers;
                 (3) springs;
                 (4) plugs;
                 (5) wearing plates;
                 (6) bolts, 
  (m) brake pad retainer kits, consisting of ALL of the
      following:
          (i) pad holding bars;
         (ii) clamping springs;
        (iii) bolts;
         (iv) washers;
          (v) locks,
  (n) brake AND/OR hub dust covers

BRAKE SHOE ASSEMBLIES, TRAILER AXLE, lined OR unlined, having 
ALL of the following:
  (a) diameter NOT less than 300 mm;
  (b) width NOT less than 150 mm;
  (c) roller;
  (d) bolt;
  (e) ring

PARTS, AIR DISC BRAKE, TRAILER, being ANY of the following:
  (a) caliper, with adjusting mechanism, with OR without brake
      pads; 
  (b) service brake chamber;
  (c) spring brake chamber;
  (d) disc rotor diameter exceeding 370 mm AND thickness 
      exceeding 45 mm;
  (e) brake pads

PARTS, TRUCK AND TRAILER, being forged aluminium machined OR 
un-machined wheels, having a rim diameter exceeding 445 mm

PARTS, TRAILER, being a sensing electronic controlled hydraulic 
trailer steering system having ALL of the following: 
  (a) kingpins;
  (b) control modules;
  (c) steering cylinders 
with OR without remote control

SPACER BANDS, DEMOUNTABLE STEEL RIM, TUBELESS TYRE, corrugated, 
in EITHER of the following sizes:
Imperial Size/Industry Size (in inches)    Metric Size (in mm)
4.00 x 20                                  101.6 x 508
4.25 x 20                                  107.95 x 508

ASSEMBLIES, BRAKE, ON ROAD TRUCK AND/OR TRAILER, being BOTH of 
the following:
  (a) hubs;
  (b) drums OR rotors

WHEELS, TUBELESS TYRE, steel disc centre, one piece assembly, in 
EITHER of the following sizes:
Imperial Size/Metric Size (in inches)    Metric Size (in mm)
8.25 x 22.5                              209.55 x 571.5
9.00 x 22.5                              228.6 x 571.5

DISK WHEELS OR DEMOUNTABLE RIMS, steel, with OR without valves, 
being EITHER of the following:
  (a) demountable rims in EITHER of the following sizes:
         (i) 8.25 in x 22.5 in;
        (ii) 6.00 in x 17.5 in,
  (b) disk wheels in ANY of the following sizes:
          (i) 8.25 in x 22.5 in;
         (ii) 7.50 in x 19.5 in;
        (iii) 6.00 in x 17.5 in;
         (iv) 6.75 in x 17.5 in

STEEL RIMS, TUBELESS TYRE, one piece assembly, demountable, in 
EITHER of the following sizes:
Imperial Size/Industry Size (in inches)    Metric Size (in mm)
8.25 x 22.5                                209.55 x 571.5
9.00 x 22.5                                228.6 x 571.5

PARTS, TRUCK TRAILER, being brake shoes

PARTS, BRAKE, ON-ROAD TRUCK TRAILER HAVING A GROSS VEHICLE 
WEIGHT NOT LESS THAN 7.5 TONNE, being ANY of the following:
  (a) discs;
  (b) drums;
  (c) hubs;
  (d) rotors

ALUMINIUM WHEELS, in the following sizes:
      IMPERIAL           APPROXIMATE METRIC EQUIVALENT
   8.25 in x 19.5 in        20.96 cm x 49.53 cm
   7.5 in x 22.5 in         19.05 cm x 57.15 cm
   8.25 in x 22.5 in        20.96 cm x 57.15 cm
   9.0 in x 22.5 in         22.86 cm x 57.15 cm
   11.75 in x 22.5 in       29.85 cm x 57.15 cm
   12.25 in x 22.5 in       31.12 cm x 57.15 cm

CASTERS, SWIVEL, comprising ALL of the following:
  (a) galvanised steel frames;                   
  (b) wheel diameter NOT greater than 125 mm;    
  (c) polyamide wheel cores;                     
  (d) polyurethane wheel treads

DISC BRAKES, PNEUMATIC, TRAILER, having BOTH of the following:
  (a) actuation force NOT greater than 260 kN;                
  (b) brake torque NOT greater than 195 kNM

WHEELS, NON-INFLATABLE, rubber and/or plastic, having a diameter 
NOT exceeding 400 mm

PARTS, AIR DISC BRAKE, being ANY of the following:
   (a) caliper assembly, comprising:
            (i) caliper;
           (ii) brake pads;
          (iii) eccentric bolt;
           (iv) lever;
            (v) synchronising device,
   (b) service brake cylinder;
   (c) disc rotor blade with minimum diameter of 370 mm and  minimum
       thickness of 45 mm

BRAKE SHOES, TRAILER AXLE, S-cam mechanical, having BOTH of the
 following:
   (a) minimum diameter of 300 mm;
   (b) minimum width of 180 mm

PARTS, SPRING BRAKE ACTUATOR, being ANY of the following:
   (a) housing;
   (b) pressure plate;
   (c) push rod;
   (d) clevis