Tariff Concession Orders

MOTORS, DC, 24 V, brushless, driven by an electronic commutating
 control unit

MOTORS, synchronous, having ALL of the following:
  (a) fully enclosed housing providing R.F.I. shielding, and
      protection from dust and water penetration;
  (b) thermal or impedence cut-out protection;
  (c) a capacitor allowing for change of direction of rotation

ACTUATORS, linear, multiple step positioning, incorporating closed
 loop feedback

ACTUATORS, linear, powered by reversible synchronous motors NOT
 exceeding 15 W

MOTORS, DC, ironless rotor, having body dimensions as follows:
   (a) OD NOT exceeding 38 mm;
   (b) length NOT exceeding 60 mm

ACTUATORS, linear, in which rotary motion of an electric
 motor is converted to linear motion by means of a screw and
 nut

MOTORS, geared, 6 V DC or 12 V DC, having ALL of the following:
   (a) motor frame length NOT exceeding 100 mm;
   (b) motor frame dia LESS than 55 mm;
   (c) gearbox containing ONLY gears solely of plastic

ACTUATORS, 24 V or 240 V AC, rotary output, having an output
 torque NOT exceeding 4 N.m

MOTORS, DC, cassette OR cartridge tape recorder/reproducer

MOTORS, timing, synchronous hysteresis, having a power rating
 NOT exceeding 10 W

ACTUATORS, linear, having a motor torque NOT exceeding
 8 N.m (8 J) at a maximum power of 7 W

MOTORS, synchronous, 240 V, frequency 50 Hz OR 60 Hz, having
 BOTH of the following:
   (a) an output shaft speed NOT exceeding 10 r/min;
   (b) a power rating NOT exceeding 10 W

MOTORS, synchronous, outer rotor

MOTORS, stepping, being motors that convert electrical digital
 information into mechanical movement

MOTORS, DC, dental handpiece, maximum speed NOT exceeding
 60 000 r/min

MOTORS, DC, 6 V, 12 V, 24 V or 24 V to 28 V, having an output
 NOT exceeding 6.5 W

MOTOR OPERATORS, tubular, having ALL of the following:
   (a) limit switch;
   (b) solenoid activated disc brake;
   (c) electric motor;
   (d) planetary reduction gear box

ACTUATORS, VALVE, having ALL of the following:
   (a) reversible permanent split capacitor synchronous motor;
   (b) manual override toggle switch

MOTORS, DC, having ALL of the following:
   (a) external motor housing diameter NOT exceeding 47 mm;
   (b) external motor housing length NOT exceeding 69 mm;
   (c) fitted with EITHER one OR both of the following:
       (i) reduction gearhead having an external housing diameter NOT
           exceeding 42 mm and an external housing length NOT
           exceeding 55 mm;
      (ii) digital or optical encoder

MOTORS, DC, having ALL of the following:
   (a) rated voltage NOT exceeding 15 V DC;
   (b) external housing diameter NOT exceeding 50 mm;
   (c) external housing length NOT exceeding 75 mm;
   (d) performance NOT exceeding 840 gr/cm torque at maximum
       efficiency

MOTORS, DC, having ALL of the following:
   (a) rated voltage NOT exceeding 24 V DC;
   (b) external housing diameter NOT exceeding 40.5 mm;
   (c) external housing length NOT exceeding 78.5 mm
 For the purposes of the order ALL measurements have a tolerance of
 plus OR minus 5%
 Does NOT include replacement components in passenger motor vehicles

MOTORS, DC, electronic commutation, brushless

MOTORS, DC, having ALL of the following:
   (a) nominal external housing dia NOT exceeding 45 mm;
   (b) nominal external housing length NOT exceeding 65 mm;
   (c) fitted with EITHER one or BOTH of the following:
         (i) reduction gearhead having a nominal external housing
             dia NOT exceeding 40 mm and a nominal external housing
             length NOT exceeding 52 mm;
        (ii) digital or optical encoder

TUBULAR MOTORS, DC, 12 V, having a power output NOT greater than 
25 W

STEPPING MOTORS, 5-phase to 2-phase, having ALL of the following:
  (a) 2 phase stepping motor with handle;
  (b) drive card;
  (c) interface card;
  (d) cable with connector,
with OR without one OR both of the following:
         (i) shaft encoder;
        (ii) 24 V direct current power supply

ELECTRIC MOTORS, including ALL of the following: 
  (a) body AND/OR housing having an outside diameter NOT greater
      than 43 mm;
  (b) one OR more worm gears;
  (c) rated voltage NOT greater than 48 V DC;
  (d) rated power input NOT greater than 38 W

MOTORS, DC, including ALL of the following:
  (a) length NOT greater than 120 mm;
  (b) rated voltage NOT greater than 42 V;
  (c) planetary gearhead diameter NOT greater than 32 mm

VALVE ACTUATORS, linear, including a brushless DC stepper motor, 
having ALL of the following:
  (a) power NOT exceeding 15 W; 
  (b) nominal force NOT less than 100 N and NOT greater 
      than 800 N;
  (c) valve stem stroke length NOT less than 2.5 mm and NOT
      greater than 20 mm

ACTUATORS, rotary,  AC AND/OR DC, with OR without spring return, 
having ALL of the following:
  (a) operating voltage NOT less than 24 V and NOT greater than 
       240 V;
  (b) torque NOT greater than 100 Nm;
  (c) power output NOT greater than 20 W;
  (d) single screw shaft fixation

MOTORS, AC, having a power output NOT greater than 37.5 W

ACTUATORS, DC, output NOT exceeding 1.5 W

MOTORS, FAN, DC, having a power output NOT greater than 37.5 W

MOTORS, FAN, REFRIGERATOR EVAPORATOR AND/OR CONDENSER, having an 
power output NOT greater than 37.5 W

MOTORS, AC, ASYNCHRONOUS, outer rotor, having an output NOT 
greater than 37.5 W

REPLACEMENT KITS, DENTAL INSTRUMENT STERILISER, consisting of  
ALL of the following:
  (a) electro magnetic valve actuators;
  (b) filters;
  (c) o-rings and seals;
  (d) heating element

DRIVES, SERVO, rated output voltage NOT greater than 34 V DC

MOTORS, universal, 230 V, single phase, power rating 1 kW or
 greater but NOT exceeding 3 kW, speed exceeding 10 000 r/min

MOTORS, AC/DC, 230 V, single phase, power rating 330 W to 1 750 W,
 both inclusive, speed exceeding 10 500 rpm

MOTORS, OUTBOARD, to which tariff item 8501.31 applies

MOTORS, DC, 24 V, brushless, driven by an electronic commutating
 control unit

MOTORS, DC, having ALL of the following:
   (a) rated voltage NOT exceeding 24 V DC;
   (b) rated output NOT exceeding 135 W;
   (c) external housing dia NOT exceeding 50 mm;
   (d) external housing length NOT exceeding 75 mm

ACTUATORS, linear, in which rotary motion of an electric
 motor is converted to linear motion by means of a screw
 and nut

MOTORS, DC, industrial sewing machine, having ALL of the
 following:
   (a) a voltage of 240 V;
   (b) a power rating of 400 W;
   (c) an integrated microprocessing control box for needle
       positioning

TACHOGENERATORS, DC only

MOTORS, DC, reduction geared, having ALL of the following:
   (a) a continuous rated output exceeding 250 W;
   (b) a voltage rating NOT exceeding 24 V;
   (c) a torque rating (at the final drive shaft) of 30 N.m
       or greater

GENERATORS, wind driven, output NOT exceeding 200 W

MOTORS, DC, power rating NOT exceeding 250 W, having ALL of the
 following:
   (a) external motor housing diameter NOT exceeding 47 mm;
   (b) external motor housing length NOT exceeding 130 mm;
   (c) fitted with EITHER one OR both of the following:
       (i) reduction gearhead having an external housing diameter NOT
           exceeding 47 mm and an external housing length NOT
           exceeding 109 mm;
      (ii) digital or optical encoder

SERVO MOTORS, DC, SELF-COMMUTATING, having ALL of the following:
   (a) permanent magnet stator, with magnets attached to the body
       of the motor;
   (b) wound armature;
   (c) tachometer, encoder or resolver;
   (d) cylindrical housing having a diameter of NOT less than 55 mm
       but NOT exceeding 105 mm;
   (e) continuous stall torque rating of NOT less than 0.2 N.m but
       NOT exceeding 7 N.m;
   (f) terminal voltage of NOT less than 40 V DC but NOT exceeding
       180 V DC;
 but NOT including servo motors having gear boxes

ACTUATORS, VALVE OR DAMPER, ELECTRIC MOTOR

MOTORS, tilt/trim, marine

MOTORS, DC, power rating NOT exceeding 100 W, having ALL of the
 following:
   (a) external motor housing diameter NOT greater than 44 mm;
   (b) external motor housing length NOT greater than 120 mm;
   (c) reduction gearhead having an external housing diameter NOT
       greater than 135 mm and an external housing length NOT
       greater than 100 mm

Generators, thermoelectric, DC output, whether OR not assembled, 
with OR without stand, including ALL of the following:
  (a) automated spark ignition;
  (b) automated fuel shut-off;
  (c) fuel filter;
  (d) low voltage alarm contacts;
  (e) reverse current protection

ACTUATORS, DC MOTOR, linear, including a screw AND nut 
spindle, being EITHER of the following:
  (a) single screw actuators;
  (b) telescopic actuators

KITS, MOTOR, having BOTH of the following:
  (a) DC reduction geared motor, having an output NOT 
      exceeding 750 W;
  (b) remote controls

MOTORS, DC, having ALL of the following:
  (a) gearbox;
  (b) power output not exceeding 100 W;
  (c) electric brake;
  (d) digital incremental encoder

MOTORS, being EITHER of the following:
   (a) 48 V DC motors;
   (b) 24 V DC motors

MOTORS, DC, REDUCTION GEARED, output greater than 37.5 W and NOT 
greater than 750 W

MOTORS, ELECTRIC, DC, output NOT greater than 750 W

MOTORS, DC, nominal 12 volt, permanent magnet, having a power 
output NOT less than 70 watts and NOT greater than 460 watts

DESKLIFTERS, linear, chain drive

MOTORS, DC, power rating NOT exceeding 100 W, having ALL of the
 following:
   (a) external motor housing diameter NOT greater than 44 mm;
   (b) external motor housing length NOT greater than 120 mm;
   (c) reduction gearhead having an external housing diameter NOT
       greater than 135 mm and an external housing length NOT
       greater than 100 mm

MOTORS, WINDSCREEN WIPER

MOTORS, DC, 12V, having a power output exceeding 160 W but NOT
 exceeding 220 W

MOTORS, stepping, being motors that convert electrical digital
 information into mechanical movement

MOTORS, DC, reduction geared, having ALL of the following:
   (a) a voltage rating NOT exceeding 24 V;
   (b) a torque rating (at the final drive shaft) of 30 N.m
       or greater

MOTORS, ELECTRIC, flameproof, water cooled, having BOTH of the
 following:
   (a) output range of 0.75 kW to 75 kW;
   (b) conforming to Australian Standard AS 2380.1 and AS 2380.2

MOTORS, tilt and/or trim, marine

ELECTRIC MOTORS, MARINE, DC, remote controlled, including ALL of 
the following:
  (a) thrust NOT greater than 115 lbs;
  (b) global positioning system;
  (c) compass

GENERATORS, DC, permanent magnet direct-current, having an 
output NOT less than 750 W, and NOT greater than 75 kW

ACTUATOR, SUBSEA, electrical, with OR without commanding valve 
positioner

ELECTRICITY GENERATORS, HYDROGEN FUEL CELL POWER

GENERATORS, having ALL of the following:
  (a) output exceeding 750W, but not exceeding 75kW;
  (b) polymer electrolyte membrane fuel cells;
  (c) heat exchanger, incorporating a radiator AND fan;
  (d) voltage controller;
  (e) fuel tank

MOTORS, DC, having BOTH of the following:
  (a) output greater than 10 kW and NOT greater than 75 kW;
  (b) voltage greater than 400 V

MOTORS, ELECTRIC, DC, having ALL of the following:
  (a) voltage rating NOT less than 11.5 V and NOT greater than
      24.5 V;
  (b) output range NOT less than 1 450 W and NOT greater 
      than 2 050 W;
  (c) torque rating NOT less than 5 N.m

MOTORS, ELECTRIC, DC, output greater than 750 W but NOT greater 
than 1 kW

DRIVES, MOTOR-IN-WHEEL, AUTOMATED GUIDED VEHICLE (AGV)

THRUSTERS, MARINE, ELECTRIC

MOTORS, DC, brushless, having ALL of the following:
  (a) output NOT exceeding 375 kW;
  (b) speed NOT greater than 20 000 RPM;
  (c) torque NOT greater than 250 Nm

MOTORS, DC, WATER AND/OR AIR COOLED, having BOTH of the 
following:
  (a) output rating exceeding 75 kW but NOT exceeding 375 kW;
  (b) armature voltage NOT less than 230 V DC and NOT 
      greater than 850 V DC

MOTORS, DC, exceeding 1 500 kW or greater, but NOT including
 replacement coils or bars therefor

MOTORS, DC, brushless, having ALL of the following:
  (a) output exceeding 375 kW;
  (b) speed NOT greater than 20 000 RPM;
  (c) torque NOT greater than 250 Nm

MOTORS, DC, water and/or air cooled, having ALL of the following:
  (a) output exceeding 375 kW;
  (b) speed NOT less than 650 RPM and NOT greater than 1 400 RPM;
  (c) armature voltage NOT less than 460 V DC and NOT greater
      than 750 V DC

DRIVE UNITS, DC, MOTORISED WHEEL TRACTION, comprising BOTH of the
 following:
   (a) traction motor;
   (b) reduction gear

MOTORS, reversible, AC, single phase, capacitor run, incorporating
 an internal disc brake assembly which is permanently engaged to
 reduce motor over-run when switching direction of motor rotation

MOTORS, stepping, being motors that convert electrical digital
 information into mechanical movement

MOTORS, synchronous, outer rotor

ACTUATORS, linear, in which rotary motion of an electric motor
 is converted to linear motion by means of a screw and nut

MOTORS, AC, servo, industrial sewing machine, having ALL of the
 following:
   (a) rated voltage 240 V AC;
   (b) power rating 500 W or greater;
   (c) integrated microprocessing control box for needle
       positioning

MOTORS, AC, submersible, having ALL of the following:
   (a) an OD less than 100 mm;
   (b) output 0.186 kW or greater but NOT exceeding 1.500 kW;
   (c) a capability to cool by positive flow of pumped water
       across the motor;
   (d) a capability for connection to the suction end of
       submersible borehole pumps

MOTORS, AC, induction, incorporating a clutch mechanism, having
 a power output of 0.248 kW or greater, single phase
 230 V to 250 V, 50 Hz

MOTOR OPERATORS, VENETIAN BLIND, having ALL of the following:
   (a) limit switch unit;
   (b) speed NOT exceeding 30 rpm;
   (c) power NOT exceeding 200 W

MOTOR OPERATORS, tubular, having ALL of the following:
   (a) limit switch;
   (b) solenoid activated brake;
   (c) electric motor rating NOT exceeding 780 W;
   (d) planetary reduction gear box

MOTOR OPERATORS, tubular, rectangular, having ALL of the following:
   (a) limit switch;
   (b) solenoid activated brake;
   (c) electric motor rating NOT exceeding 300 W;
   (d) planetary reduction gear box

ACTUATORS, VALVE OR DAMPER, ELECTRIC MOTOR, multi turn, NOT
 including actuators with secondary gearboxes having a torque rating
 of 100 000 Nm or less, having ALL the features listed in
 TABLE A and ONE OR MORE of the features listed in TABLE B
                            TABLE A
   (a) limit switch to full open and close position;
   (b) visual indication of valve or damper position throughout all
       stages of cycle open/close/open;
   (c) over torque switch(es);
                            TABLE B
   (a) having an output torque of LESS than 30 Nm;
   (b) two speed motor, giving two speeds of output;
   (c) variable speed motor, giving variable output speeds;
   (d) having an output power GREATER than 365 W

ACTUATORS, VALVE OR DAMPER, ELECTRIC MOTOR, having ALL of the
 following features:
  (a) torque for 90 degrees maximum of 1 625 Nm with limit;
  (b) torque switches;
  (c) mechanical dial position indicator;
  (d) motor kW maximum of 1.84 each unit having a declutchable manual
      handle wheel

MOTORS, BRUSH, AC 230 V - 240 V, 1 200 W - 1 400 W, 23 000 rpm

ACTUATORS, valve/damper, electric, torque for 90 degrees maximum of
 1 625 N.m with limit and torque switches and a mechanical dial
 position indicator with or without integral controls, motor kW not
 to exceed 1.84 each unit having declutchable manual handwheel

ELECTRIC MOTORS, AC, submersible, water cooled, 220/240 V, 50 Hz,
 single phase, having BOTH of the following:
   (a) outside dia 95 mm;
   (b) power rating NOT less than 2.2 kW or greater than 3.7 kW

MOTORS, AC, single phase, power output NOT greater than 3.7 kW

MOTORS, AC, single-phase, having BOTH of the following:
(a) power output greater than 37.5 W;
(b) weight NOT greater than 1 kg

MOTORS, brushless, electronically commutated, having ALL of the 
following:
  (a) AC input NOT less than 200 V and NOT greater than 277 V;
  (b) frequency 50 Hz OR 60 Hz;
  (c) single phase supply;
  (d) output NOT less than 400 W and NOT greater than 1 600 W

MOTORS, SHEARING POWER SOURCE, portable, AC single-phase, with 
or without solid down tube AND/OR mounting bracket

MOTORS, INDUCTION, ASYNCHRONOUS, SINGLE PHASE, having BOTH of 
the following:
  (a) maximum rated power NOT less than 750 W;
  (b) maximum rated voltage NOT greater than 240 V, 50 Hz;

MOTORS, CURTAIN TRACK, having ALL of the following:
  (a) 90 - 260V AC, single phase power supply;
  (b) operating speed NOT greater than 110 rpm;
  (c) dimensions NOT greater 240 x 90 x 60 mm;
  (d) weight NOT greater than 1 kg;
  (e) drapery weight NOT greater than 44 kgs

MOTORS, frameless, induction, 2 pole, reversing, having ALL of
the following:
  (a) breakdown torque NOT less than 0.9 N.m;
  (b) motor stator lamination diameter NOT greater 
      than 150 mm;
  (c) temperature rise within the appliance complying with
      Australian/New Zealand Standard AS/NZS 3350.2.11:2001

MOTORS, stepping, being motors that convert electrical digital
 information into mechanical movement

MOTORS, AC, three phase, submersible, having ALL of the following:
   (a) an OD less than 100 mm;
   (b) a capability to cool by positive flow of pumped water
       across the motor;
   (c) a capability for connection to the suction end of
       submersible borehole pumps

ACTUATORS, linear, in which rotary motion of an electric motor
 is converted to linear motion by means of a screw and nut

SERVO MOTORS, brushless, AC, synchronous, 3 phase, having ALL of the
 following:
   (a) a permanent magnet rotor;
   (b) feedback by an encoder or a resolver; and
   (c) having ANY of the following specifications:
            (i) continuous stall torque rating not more than 0.50 Nm,
                with a rotor inertia NOT greater than 0.75 kg/cm2;
           (ii) continuous stall torque rating of more than 0.50 Nm
                but NOT more than 0.80 Nm, with a rotor inertia NOT
                greater than 0.29 kg/cm2;
          (iii) continuous stall torque rating of more than 0.80 Nm
                but NOT more than 1.00 Nm, with a rotor inertia NOT
                greater than 0.13 kg/cm2;
           (iv) continuous stall torque rating of more than 1.00 Nm
                but NOT more than 1.40 Nm, with a rotor inertia NOT
                greater than 0.19 kg/cm2;
            (v) continuous stall torque rating of more than 1.40 Nm
                but NOT more than 1.50 Nm, with a rotor inertia NOT
                greater than 0.47 kg/cm2;
           (vi) continuous stall torque rating of more than 1.50 Nm
                but NOT more than 1.65 Nm, with a rotor inertia NOT
                greater than 4.27 kg/cm2;
          (vii) continuous stall torque rating of more than 1.65 Nm
                but NOT more than 2.40 Nm, with a rotor inertia NOT
                greater than 6.30 kg/cm2;
         (viii) continuous stall torque rating of more than 2.40 Nm
                but NOT more than 3.30 Nm, with a rotor inertia NOT
                greater than 8.10 kg/cm2;
           (ix) continuous stall torque rating of more than 3.30 Nm
                but NOT more than 6.00 Nm, with a rotor inertia NOT
                greater than 8.80 kg/cm2;
            (x) continuous stall torque rating of more than 6.00 Nm
                but NOT more than 10.00 Nm, with a rotor inertia NOT
                greater than 32.00 kg/cm2;
           (xi) continuous stall torque rating of more than 10.00 Nm
                but NOT more than 16.90 Nm, with a rotor inertia NOT
                greater than 64.10 kg/cm2;
          (xii) continuous stall torque rating of more than 16.90 Nm
                but NOT more than 42.00 Nm, with a rotor inertia NOT
                greater than 113.00 kg/cm2; or
         (xiii) continuous stall torque rating of more than 42.00 Nm
                but NOT more than 50.00 Nm, with a rotor inertia NOT
                greater than 470.00 kg/cm2

ACTUATORS, LINEAR, electric motor driven, multi turn

ACTUATORS, valve or damper, electric motor driven, multi turn

ACTUATORS, valve/damper, electric, torque for 90 degrees maximum of
 1 625 N.m with limit and torque switches and a mechanical dial
 position indicator with or without integral controls, motor kW not
 to exceed 1.84 each unit having declutchable manual handwheel

MOTORS, electric, multiphase, having ANY one OR more of the 
following: 
  (a) voltage NOT exceeding 750 V;
  (b) gear units;
  (c) variable speed drive;
  (d) resolvers OR encoders;
  (e) brakes

DRIVE UNITS, DISTRIBUTION AND HORIZONTAL MOTION CONVEYOR, 
including ALL of the following:
  (a) electric motor;
  (b) sprockets;
  (c) bearings;
  (d) driving belts

ELECTRIC MOTORS, AC, multi-phase, having an output NOT  
exceeding 750 W

MOTORS, SQUIRREL CAGE, three phase, having BOTH of the following:
   (a) output NOT exceeding 0.75 kW;
   (b) inbuilt reduction drive

ELECTRIC MOTORS, AC, submersible, 415 V, 50 Hz, three phase,
 having BOTH of the following characteristics:
   (a) outside dia 95 mm;
   (b) power rating NOT less than 2.2 kW or greater than 3.7 kW

MOTORS, stepping, being motors that convert electrical digital
 information into mechanical movement

MOTORS, synchronous, outer rotor

MOTORS, AC, squirrel cage, lift/elevator, being ALL of the
 following:
   (a) single speed or two speed;
   (b) 3 phase 415/440 V AC, 50 Hz;
   (c) maximum power output 8.2 kW or greater but NOT exceeding
       30 kW,
 but NOT including replacement coils or bars therefor

ACTUATORS, linear, in which rotary motion of an electric motor
 is converted to linear motion by means of a screw and nut

ELECTRIC MOTORS, AC, SUBMERSIBLE, water cooled, 415 V, three phase

SERVO MOTORS, brushless, AC, synchronous, 3 phase, having ALL of the
 following:
   (a) a permanent magnet rotor;
   (b) feedback by an encoder or a resolver; and
   (c) having ANY of the following specifications:
            (i) continuous stall torque rating not more than 0.50 Nm,
                with a rotor inertia NOT greater than 0.75 kg/cm2;
           (ii) continuous stall torque rating of more than 0.50 Nm
                but NOT more than 0.80 Nm, with a rotor inertia NOT
                greater than 0.29 kg/cm2;
          (iii) continuous stall torque rating of more than 0.80 Nm
                but NOT more than 1.00 Nm, with a rotor inertia NOT
                greater than 0.13 kg/cm2;
           (iv) continuous stall torque rating of more than 1.00 Nm
                but NOT more than 1.40 Nm, with a rotor inertia NOT
                greater than 0.19 kg/cm2;
            (v) continuous stall torque rating of more than 1.40 Nm
                but NOT more than 1.50 Nm, with a rotor inertia NOT
                greater than 0.47 kg/cm2;
           (vi) continuous stall torque rating of more than 1.50 Nm
                but NOT more than 1.65 Nm, with a rotor inertia NOT
                greater than 4.27 kg/cm2;
          (vii) continuous stall torque rating of more than 1.65 Nm
                but NOT more than 2.40 Nm, with a rotor inertia NOT
                greater than 6.30 kg/cm2;
         (viii) continuous stall torque rating of more than 2.40 Nm
                but NOT more than 3.30 Nm, with a rotor inertia NOT
                greater than 8.10 kg/cm2;
           (ix) continuous stall torque rating of more than 3.30 Nm
                but NOT more than 6.00 Nm, with a rotor inertia NOT
                greater than 8.80 kg/cm2;
            (x) continuous stall torque rating of more than 6.00 Nm
                but NOT more than 10.00 Nm, with a rotor inertia NOT
                greater than 32.00 kg/cm2;
           (xi) continuous stall torque rating of more than 10.00 Nm
                but NOT more than 16.90 Nm, with a rotor inertia NOT
                greater than 64.10 kg/cm2;
          (xii) continuous stall torque rating of more than 16.90 Nm
                but NOT more than 42.00 Nm, with a rotor inertia NOT
                greater than 113.00 kg/cm2; or
         (xiii) continuous stall torque rating of more than 42.00 Nm
                but NOT more than 50.00 Nm, with a rotor inertia NOT
                greater than 470.00 kg/cm2

ACTUATORS, VALVE OR DAMPER, ELECTRIC MOTOR, multi turn, NOT
 including actuators with secondary gearboxes having a torque rating
 of 100 000 Nm or less, having ALL the features listed in
 TABLE A and ONE OR MORE of the features listed in TABLE B
                            TABLE A
   (a) limit switch to full open and close position;
   (b) visual indication of valve or damper position throughout all
       stages of cycle open/close/open;
   (c) over torque switch(es);
                            TABLE B
   (a) having an output torque of LESS than 30 Nm;
   (b) two speed motor, giving two speeds of output;
   (c) variable speed motor, giving variable output speeds;
   (d) having an output power GREATER than 365 W

MOTORS, SQUIRREL CAGE, three phase, having an output exceeding 750 W
 but NOT exceeding 75 kW

SUBMERSIBLE MOTORS, AC, multi phase, having ALL of the following:
   (a) internal water lubrication;
   (b) hermetically sealed canned stator with carbon/stainless steel
       bearings;
   (c) outside diameter NOT exceeding 191 mm

MOTORS, flame proof, three phase, having an output exceeding 750 W
 but NOT exceeding 75 kW, conforming to Australian Standard AS2380.2

ACTUATORS, valve or damper, electric motor driven, multi-turn,
  (OTHER THAN actuators imported with secondary gearboxes having a
  torque rating of 100 000 Nm or less), having ALL of the following:
    (a) facilities to permit momentary torque in excess of maximum at
        the moment the valve or damper commences to open
        (hammer blow);
    (b) emergency manual operation by means of a declutching
        mechanism;
    (c) limit switches or relays configurable to signal ANY of the
        following:
          (i) valve position;
         (ii) opening;
        (iii) closing;
         (iv) moving;
          (v) fully open;
         (vi) fully closed;
        (vii) motor tripped on torque in mid travel;
       (viii) pre-set torque exceeded;
         (ix) motor stalled;
          (x) battery low;
         (xi) actuator being operated by hand wheel;
    (d) visual indication of valve or damper position throughout all
        stages of cycle open/close/open;
    (e) over torque trip mechanism;
    (f) non intrusive infra-red commissioning

MOTORS, submersible, stainless steel, NOT exceeding 152.4mm outside
 diameter of motor, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW and 22kW

DRIVES, whether OR not assembled, including ALL of the following;
  (a) output capacity NOT less than 10 kW and NOT greater than 
      31 kW; 
  (b) gear units AND/OR gears 
      with OR without ANY of the following: 
           (i) shafts; 
          (ii) couplings;
         (iii) flanges;
          (iv) transmission OR rotary chain;
           (v) toothed wheels;  
          (vi) support structures AND/OR frames; 
         (vii) covers AND/OR protectors;      
        (viii) mounting fixtures AND/OR fastenings;
          (ix) control panels AND/OR cabinets

MOTORS, linear synchronous, AC, three phase, having an output 
NOT greater than 75 kw

MOTORS, PROOFER DRIVE UNIT, electric, including BOTH of the 
following: 
  (a) gear units;
  (b) spiral drive units

INDUCTION MOTORS, AC, having BOTH of the following:
  (a) 3 phase;
  (b) power rating NOT greater than 45 kW

MOTORS, submersible, AC, multiphase, having ALL of the following:
  (a) double flanged mounting;
  (b) stainless steel splined shaft;
  (c) water lubricated thrust bearing; 
  (d) hermetically sealed encapsulated stator;
  (e) replaceable lead;
  (f) motor speed NOT greater than 3 525 rpm at 60 Hz;
  (g) external sand slinger on shaft;
  (h) copper bar rotor;
  (i) variable frequency drive input;
  (j) power output NOT greater than 75 kW;
  (k) outside diameter NOT greater than 205 mm

GEARED MOTORS, AC, asynchronous, four pole, three phase, with OR 
without motor speed encoders, including ALL of the following:
  (a) rated power NOT less than 30 kW and NOT greater than 55 kW;
  (b) surface AND/OR air cooling;
  (c) brakes;
  (d) motor operating voltage NOT less than 380 V AC and NOT 
      greater than 420 V AC;
  (e) temperature sensors

MOTORS, SYNCHRONOUS, including BOTH of the following:
  (a) output capacity NOT greater than 11 kW;
  (b) excitation panel

MOTORS, electric, whether OR not servo motors, multiphase,  
having an output exceeding 750 W but NOT exceeding 75 kW, with 
ANY one OR more of the following:
  (a) gear units;
  (b) brakes;
  (c) speed changers;
  (d) resolvers OR encoders

MOTORS, brushless, electronically commutated, having ALL of the 
following:
  (a) AC input NOT less than 380 V and NOT greater than 480 V;
  (b) frequency 50 Hz OR 60 Hz;
  (c) three phase supply;
  (d) output NOT less than 1 kW and NOT greater than 6 kW

DRIVES, DIRECT, having ALL of the following:
  (a) braking mechanisms;
  (b) gearing;
  (c) output exceeding 750 W but NOT exceeding 75 kW

DRIVES, DIRECT, including ALL of the following:
  (a) integrated braking mechanism;
  (b) gearing components;
  (c) control panels, switches and mountings

MOTORS, AC, synchronous, permanent magnet, 3 phase, 4 pole, 
having an output NOT less than 1 kW and NOT greater than 4 kW

MOTORS, AC, SQUIRREL CAGE, ROTOR INDUCTION, having ALL of the 
following:
(a) power rating NOT less than 5 kW and NOT greater than 20 kW;
(b) NOT less than 4 poles and NOT greater than 16 poles;
(c) multi phase

MOTORS, INDUCTION, AC, THREE PHASE, having BOTH of the following:
 (a) 6 poles;
 (b) power rating greater than 70 kW

MOTORS, AC, comprising ALL of the following:
   (a) 3 phase;
   (b) voltage NOT greater than 420 volts;
   (c) TEFC (totally enclosed fan cooled);
   (d) sensor less vector control

MOTORS, induction, AC, slipring, being such motors having a
 pole configuration specified below and a rated kW output
 exceeding that shown opposite each such specification:
       Pole Configuration         Rated Output Exceeding
   (a)  2 pole                  2 360 kW;
   (b)  4 pole                  2 300 kW;
   (c)  6 pole                  1 500 kW;
   (d)  8 pole                  1 120 kW;
   (e) 10 pole                  1 000 kW;
   (f) 12 pole                    850 kW;
   (g) 14 pole or greater         700 kW,
 but NOT including coils or bars therefor

MOTORS, induction, AC, squirrel cage type, horizontal shaft
 foot mounted, being such motors having a pole configuration
 specified below and a rated kW output exceeding that shown
 opposite each such specification:
       Pole Configuration         Rated Output Exceeding
   (a)  2 pole                    2 360 kW;
   (b)  4 pole                    2 300 kW;
   (c)  6 pole                    1 500 kW;
   (d)  8 pole                    1 120 kW;
   (e) 10 pole                    1 000 kW;
   (f) 12 pole                      850 kW;
   (g) 14 pole or greater           750 kW,
 but NOT including coils or bars therefor

MOTORS, AC, multi-phase, having an output exceeding 75Kw, being
 ANY of the following:
   (a) flameproof;
   (b) non-flameproof slip ring;
   (c) non-flameproof squirrel cage

ELECTRIC MOTORS, AC, SUBMERSIBLE, water cooled, 415 V, three phase

MOTORS, submersible, two pole, three phase, squirrel cage induction,
 having an OD of 95 mm or greater

SUBMERSIBLE MOTORS, AC, multi phase, having ALL of the following:
   (a) internal water lubrication;
   (b) outside diameter of motor NOT exceeding 196 mm;
   (c) hermetically sealed canned stator with carbon/stainless steel
       bearings

INDUCTION MOTORS, AC, squirrel cage, having BOTH of the 
following:
  (a) three-phase;
  (b) power rating NOT less than 750 kW

INCHING DRIVE ASSEMBLIES, BALL MILL, including ALL of the 
following:
  (a) four-stage reducer;
  (b) motor;
  (c) shiftable gear coupling;
  (d) brake

INDUCTION MOTORS, AC, including ALL of the following:
  (a) 3-phase;
  (b) power rating NOT less than 132 kW;
  (c) speed capacity NOT greater than 65 km/h

INDUCTION MOTORS, AC, having BOTH of the following:
  (a) 3 phase;
  (b) power rating NOT greater than 170 kW

INDUCTION MOTORS, SPEED REDUCER, AC, having BOTH of the 
following:
  (a) output NOT less than 1,000 kW;
  (b) torque NOT less than 2,000 Nm

TRACTION MOTORS, three-phase AC, including ALL of the following:
  (a) output NOT greater than 300 kW;
  (b) integrated transmission;
  (c) inverter;
  (d) electronic control unit;
  (e) water AND/OR oil cooling unit

STABILISERS, POWER GRID, rotating, synchronous, horizontally 
mounted, having ALL of the following:
  (a) reactive power NOT less than 60 MV Ar;
  (b) inertia NOT less than 330 000 kg/m2;
  (c) voltage NOT less than 13 kV

MOTORS, SYNCHRONOUS, AC, multiphase, having ALL of the following:
  (a) power output exceeding 2 450 kW;
  (b) current exceeding than 250 A;
  (c) voltage exceeding than 5 900 V;
  (d) motor frame;
  (e) cooling unit;
  (f) sleeve bearing;
  (g) thermal expansion unit

TRACTION MOTORS, DIESEL AND ELECTRIC DUMP TRUCK, three-phase AC 
induction, having an output exceeding 3 000 kW

MOTORS, submersible, AC, multiphase, having ALL of the following:
  (a) double flanged mounting;
  (b) stainless steel splined shaft;
  (c) water lubricated thrust bearing; 
  (d) hermetically sealed encapsulated stator;
  (e) replaceable lead;
  (f) motor speed NOT greater than 3 525 rpm at 60 Hz;
  (g) external sand slinger on shaft;
  (h) copper bar rotor;
  (i) variable frequency drive input;
  (j) power output NOT greater than 150 kW;
  (k) outside diameter NOT greater than 205 mm

MOTORS, SYNCHRONOUS, including ALL of the following:
  (a) cooling units, having fans;
  (b) stator winders;
  (c) couplings;
  (d) speed AND position encoders, having BOTH of the following:
        (i) pulse encoder;
       (ii) absolute position encoder, 
  (e) shaft earthing brushes;
  (f) air gap detectors, having an alarm;
  (g) locking pins;
  (h) cooling unit leakage detectors;
  (i) anti-condensation heaters;
  (j) terminal boxes;
  (k) bearings;
  (l) plates;
  (m) shims,
with OR without lubrication units, having ALL of the following:
     (i) pumps;
    (ii) filters;
   (iii) heat exchangers;
    (iv) hydrostatic jacking circuits

MOTOR AND VARIABLE SPEED DRIVES, ARMOURED FACE CONVEYOR, having 
ALL of the following:
  (a) voltage NOT less than 3 300 V;
  (b) output power capacity NOT less than 500 kW;
  (c) rated amps NOT less than 110 A

GEAR MOTORS, AC, asynchronous, three phase four pole type, 
having ALL of the following:
  (a) power rating NOT less than 76 kW and NOT greater than 
      90 kW;
  (b) operating voltage NOT less than 380 V AC and NOT greater 
      than 420 V AC;  
  (c) surface cooling;
  (d) brakes;
  (e) temperature sensors,
with OR without speed encoders

TRACTION MOTORS, DIESEL-ELECTRIC LOCOMOTIVE, 3 phase AC 
induction, having an output exceeding 3 000 kW

MOTORS, AC, asynchronous, six pole, three phase, with OR without 
motor speed encoders, including ALL of the following:
  (a) power rating NOT less than 220 kW and NOT greater than
      255 kW;
  (b) forced AND/OR fan cooling;
  (c) operating voltage NOT less than 360 V AC and NOT greater
      than 400 V AC;
  (d) temperature sensors

GEARMOTORS, including ALL of the following:
  (a) AC motor;
  (b) gear unit;
  (c) couplings;
  (d) brake;
  (e) cooling unit;
  (f) steel frame

DRIVE MOTORS, having ALL of the following:
  (a) horizontal helical gear;
  (b) three stage reduction gearboxes;
  (c) couplings

MOTORS, SPEED REDUCER, AC, INDUCTION, having all of the 
following:
  (a) output NOT less than 1 000 kW;
  (b) torque NOT less than 2 000 Nm;
  (c) tachometer sensors

MOTORS, AC, induction, squirrel cage, three phase, four pole, 
having ALL of the following:
  (a) voltage NOT less than 400 V;
  (b) frequency NOT less than 45 Hz;
  (c) power rating NOT less than 260 kW;
  (d) direct on line starter

MOTORS, AC, SYNCHRONOUS, multiphase, having ALL of the following:
  (a) power output greater than 1 450 kW;
  (b) rated current greater than 100 A;
  (c) rated voltage greater than 3 000 V

SPEED REDUCERS, axle mounted, incorporating an AC motor

MOTORS, TRACTION, PASSENGER TRAIN

MOTORS, INDUCTION, AC, SQUIRREL CAGE, three phase, having BOTH 
of the following:
  (a) output NOT less than 85 kW;
  (b) torque NOT less than 500 Nm

TRANSAXLES, CONTINUOUSLY VARIABLE TRANSMISSION, having ALL the 
following:
  (a) permanent magnet AC synchronous motor generators;
  (b) voltage NOT greater than 650 AC;
  (c) power output NOT less than 100 kW;
  (d) power spilt planetary gear sets;
  (e) speed reduction planetary gear sets

DRIVES, UNDERGROUND CONVEYOR

MOTORS, AC, SQUIRREL CAGE, TOTALLY ENCLOSED FAN COOLED(TEFC)

MOTORS, SYNCHRONOUS, GEARLESS WRAP AROUND

GENERATORS OR ALTERNATORS, AC, single or two bearing configuration,
 having ALL of the following features:
   (a) continuous output of NOT less than 10 kVA but NOT greater
       than 75 kVA;
   (b) frequency of 50 Hz or 60 Hz;
   (c) voltage NOT less than 115 V and NOT greater than 480 V;
   (d) 2 or 4 poles configuration;
   (e) voltage regulation

GENERATORS (ALTERNATORS), AC, configuration single or two bearings,
 having of ALL of the following:
   (a) continuous output of NOT less than 10 kVA and NOT greater than
       75 kVA;
   (b) frequency 50 Hz or 60 Hz;
   (c) voltage NOT less than 110 V and NOT greater than 480 V;
   (d) 2 poles operating at 3 000 rpm to 3 600 rpm;
   (e) short circuit and overload current of 300%;
   (f) fitted with electronic voltage regulator

GENERATORS (ALTERNATORS), AC, single bearing, 2 pole
 brushless design, single phase, fitted with excitation capacitor
 auxiliary windings, having ALL of the following:
   (a) continuous rated output NOT exceeding 7.7 kW;
   (b) rated voltage of NOT less than 220 V and NOT greater than
       250 V;
   (c) a damp cage fitted to the rotor and a voltage wave form with
       total harmonic distortion of less than 6 %;
   (d) rated frequency 50 Hz;
   (e) rated speed of 3,000 rpm;
   (f) rotor, having a hole along the entire length for a through
       bolt to allow attachment to the engine;
   (g) PVC plug in connectors for output cables

TURBO-ALTERNATORS, ENGINE POWER GENERATOR, having an output
capacity NOT greater than 25 kVA

ALTERNATORS, AC, single phase, 2 pole brushless, having ALL of 
the following:
  (a) continuous output NOT greater than 10 kVA;
  (b) frequency 50 Hz OR 60 Hz;
  (c) rated speed of 3 000 rpm

ALTERNATORS, AC, having ALL of the following:
  (a) continuous output NOT greater than 10 kVA;
  (b) 2 or 4 pole configuration;
  (c) frequency 50 Hz OR 60 Hz

GENERATORS, SOLAR POWERED ELECTRICITY, having a nominal capacity 
of NOT greater than 16 kW, comprising ALL of the following:
  (a) photovoltaic cell modules;
  (b) towers;
  (c) switchboards;
  (d) pedestals;
  (e) inverters;
  (f) swivels;
  (g) hydraulic cylinders

GENERATORS OR ALTERNATORS, AC, single or two bearing configuration,
 having ALL of the following features:
   (a) continuous output of NOT less than 75 kVA but NOT greater
       than 320 kVA;
   (b) frequency of 50 Hz or 60 Hz;
   (c) voltage NOT less than 115 V and NOT greater than 480 V;
   (d) 4 poles configuration;
   (e) voltage regulation

GENERATORS, SOLAR POWERED ELECTRICITY, having a nominal capacity 
of NOT greater than 16 kW, comprising ALL of the following:
  (a) photovoltaic cell modules;
  (b) towers;
  (c) switchboards;
  (d) pedestals;
  (e) inverters;
  (f) swivels;
  (g) hydraulic cylinders

GENERATOR SETS, diesel powered, multi-phase, having ALL of the 
following:
  (a) frequency NOT less than 50 Hz and NOT greater than 60 Hz;
  (b) voltage NOT less than 230 V and NOT greater than 480 V;
  (c) water cooled engine;
  (d) engine operating speed NOT less than 1 500 rpm and NOT
      greater than 1 800 rpm;
  (e) alternator

WELDER GENERATORS, AC AND/OR DC, diesel engine driven, whether 
OR not assembled, including ALL of the following:
  (a) power output NOT greater than 27 000 W peak;
  (b) welding AND operator controls;
  (c) meters AND/OR gauges;
  (d) electronic engine display;
  (e) weld output terminals;
  (f) receptacles AND circuit breakers;

WELDER GENERATORS, diesel driven engine, whether OR not 
assembled, having ALL of the following:
  (a) single OR dual mode DC welder; 
  (b) 3 phase OR 1 phase AC generator;  
  (c) air compressor

GENERATORS, WELDING, AC AND/OR DC, with OR without compressor, 
having ALL of the following: 
  (a) AC power output NOT greater than 13 500 W; 
  (b) weight NOT less than 286 kg and NOT greater than 990 kg;
  (c) weld output NOT greater than 800 A

GENERATING SETS, ELECTRIC, AC, having an output capacity NOT 
greater than 75 kVA

GENERATORS, AC, diesel powered, having BOTH of the following:
  (a) frequency NOT less than 45 Hz and NOT greater than 65 Hz;
  (b) voltage NOT less than 210 V and NOT greater than 430 V;

GENERATORS, DC, WELDING, having ALL of the following:
 (a) power output NOT greater than 24 kVA;
 (b) welding output NOT greater than 525 amps; 
 (c) asynchronous alternators

GENERATOR SETS, diesel powered, multi-phase, having ALL of the 
following:
  (a) frequency NOT less than 50 Hz and NOT greater than 60 Hz;
  (b) voltage NOT less than 230 V and NOT greater than 480 V;
  (c) water cooled engine;
  (d) engine speed NOT less than 1 500 rpm and NOT greater than 
      1 800 rpm;
  (e) alternator

GENERATING SETS, ELECTRIC, AC, having an output capacity NOT less
than 75 kVA and NOT greater than 375 kVA

GENERATORS, AC, diesel powered, having BOTH of the following:
  (a) frequency NOT less than 45 Hz and NOT greater than 65 Hz;
  (b) voltage NOT less than 210 V and NOT greater than 430 V;

GENERATOR SETS, diesel powered, multi-phase, having ALL of the 
following:
  (a) frequency NOT less than 50 Hz and NOT greater than 60 Hz;
  (b) voltage NOT less than 230 V and NOT greater than 480 V;
  (c) water cooled engine;
  (d) engine operating speed NOT less than 1 500 rpm and NOT
      greater than 1 800 rpm;
  (e) alternator

GENERATING SETS, ELECTRIC, AC, having an output capacity greater 
than 375 kVA

GENERATORS, PORTABLE, 50 HZ or 60 HZ, 240 V AC, 2 Terminal DC points
 for battery charger powered by spark ignition internal combustion
 engine being either of the following:
    a)  Engine displacement 78 CC maximum output 550 W at 50 HZ,
        650 W at 60 HZ;
    b)  Engine displacement 143 cc maximum output 1000 W at 50 HZ,
        1200 W at 60 HZ

HEAT AND POWER PLANTS, COGENERATION, programmable logic 
controlled, including ALL of the following:
  (a) natural gas fuelled AC generator;
  (b) spark ignition internal combustion engine;
  (c) alternator;
  (d) urea skid;
  (e) oil tanks;
  (f) flue gas cleaner;
  (g) air expulsion roof with dry cooler AND chimney;
  (h) air inlet AND outlet towers;
  (i) grow light computer;
  (j) master control panel

HEAT AND POWER SETS, programmable logic controlled, including 
ALL of the following:
  (a) generator;
  (b) spark-ignition internal combustion engine; 
  (c) power output NOT less than 60 kW;
  (d) heat output NOT less than 60 kW

GENERATOR SETS, AC, having a power output NOT less than 300 kVA, 
consisting of ALL of the following:
  (a) spark ignition internal combustion engine, incorporating 
     reciprocating pistons AND turbo charger;
  (b) generator;
  (c) coupling AND flexible mounting;
  (d) combustion air filter;
  (e) cooling water systems, consisting of BOTH of the following:
         (i) engine jacket water cooling system, consisting of 
             ALL of the following:
                     (1) pumps;
                     (2) heat exchanger;
                     (3) expansion tanks; 
                     (4) control valve;
        (ii) engine intake mixture cooling system, consisting
             of  ALL of the following:
                     (1) pump;
                     (2) heat exchangers;
                     (3) expansion tank; 
                     (4) control valve;
  (f) fuel gas pressure regulator;
  (g) lube oil system, consisting of BOTH of the following:
          (i) pre-lubrication pump;
         (ii) engine sump, with oil sump tanks;
  (h) engine monitoring system, consisting of BOTH of the
      following:
         (i) controls; 
        (ii) speed, temperature AND power monitors;
  (i) switchgear with controls;
  (j) air supply system, consisting of ALL of the following:   
         (i) fans;
        (ii) prefilters;
        (iii) dampers;
  (k) air discharger, with a damper;
  (l) acoustic enclosure

HEAT AND POWER GENERATOR SYSTEM, programmable logic controlled, 
whether OR not assembled, including ALL of the following:
  (a) spark ignition internal combustion engine, incorporating 
      reciprocating pistons AND turbo charger;
  (b) generator, having a power output NOT less than 300 kVA;
  (c) combustion air filter; 
  (d) exhaust heat exchanger;
  (e) cooling water systems, consisting of ALL the following:
         (i) engine jacket water cooling system, consisting of
             ALL of the following:
                 (1) pumps;
                 (2) heat exchanger;
                 (3) expansion tanks;
                 (4) control valve;
        (ii) engine intake mixture cooling system, consisting
             of ALL of the following:
                 (1) pump;
                 (2) heat exchangers;
                 (3) expansion tank; 
                 (4) control valve;
       (iii) hot water heating system, consisting of BOTH of the
             following:
                 (1) pump;
                 (2) heat exchanger;
  (f) exhaust silencers;
  (g) gas safety valve train;
  (h) lube oil system, consisting of BOTH of the following:
                 (1) pre-lubrication pump;
                 (2) engine sump, with oil sump tanks;
  (i) engine monitoring system consisting of BOTH of the
      following:
                 (1) controls; 
                 (2) speed, temperature AND power monitors;
  (j) switchgear with controls;
  (k) air supply system, consisting of ALL of the following:
                 (1) fans;
                 (2) prefilters; 
                 (3) acoustic attenuator;
                 (4) damper;
  (l) air discharge system, consisting of BOTH of the following:
                 (1) acoustic attenuator;
                 (2) damper;
  (m) acoustic enclosure

HEAT AND POWER GENERATOR SYSTEM, programmable logic controlled, 
including ALL of the following:
  (a) gasifier;
  (b) gas cleaning AND filtering module;
  (c) generator;
  (d) rotary valve fuel feeding system;
  (e) ash removal system;
  (e) spark-ignition internal combustion engine

GENERATOR SETS, INVERTER, spark-ignition internal combustion 
piston engine powered, weight NOT less than 12 kg and NOT 
greater than 97 kg

GENERATORS, spark-ignition internal combustion piston engine 
powered, having a weight NOT less than 13 kg and 
NOT greater than 97 kg

GENERATORS, WELDING, AC AND/OR DC, with OR without compressor, 
having ALL of the following:
  (a) AC power output NOT greater than 13 500 W;
  (b) weight NOT less than 128 kg and NOT greater than 385 kg;
  (c) weld output NOT greater than 385 A

GENERATORS, gas fuelled

GENERATORS, powered by spark-ignition internal combustion 
engine, having ALL of the following:
  (a) frequency NOT less than 50 Hz;
  (b) voltage NOT less than 230 V AC;
  (c) AC output NOT less than 5 500 W and NOT greater than
      8 500 W

GENERATORS, powered by spark-ignition internal combustion 
engine, having ALL of the following:
  (a) frequency NOT less than 50 Hz;
  (b) voltage NOT less than 230 V AC;
  (c) AC output NOT less than 2 300 W and NOT greater 
      than 7 000 W

GENERATORS, AC, having a power output NOT less than 300 kVA

GENERATORS, AC/DC, having a weight NOT greater than 36 kg

GENERATORS, having ALL of the following:             
 (a) NOT less than 50 Hz and NOT less than 240 V AC; 
 (b) AC output NOT greater than 5 500 W;             
 (c) built in voltmeter

GENERATORS, having ALL of the following:            
 (a) NOT less than 50 Hz and NOT less than 230 V AC;
 (b) AC output NOT greater than 6 000 W;            
 (c) weight NOT less than 90 kg;                    
 (d) inverter

GENERATORS, having ALL of the following:             
  (a) NOT less than 50 Hz and NOT less than 240 V AC;
  (b) AC output NOT greater than 2 800 W;            
  (c) built in voltmeter

GENERATORS, having ALL of the following:              
  (a) NOT less than 50 Hz and NOT less than 230 V AC; 
  (b) AC output NOT greater than 2 000 W;             
  (c) weight NOT less than 22 kg;                     
  (d) inverter

GENERATORS, having ALL of the following:            
 (a) NOT less than 50 Hz and NOT less than 230 V AC;
 (b) AC output NOT greater than 1 000 W;            
 (c) weight NOT less than 14 kg;                    
 (d) inverter

GENERATORS, having ALL of the following:             
  (a) NOT less than 50 Hz and NOT less than 230 V AC;
  (b) AC output NOT greater than 2 600 W;            
  (c) weight NOT less than 26 kg;                    
  (d) inverter

GENERATORS, having ALL of the following:                      
  (a) NOT less than 50 Hz and NOT less than 230 V AC;         
  (b) AC output NOT greater than 3 000 W;                     
  (c) weight NOT less than 60 kg;                             
  (d) inverter

GENERATORS AND DISTRIBUTORS, WIND POWERED, electric, having ALL 
the following:
  (a) AC/DC generators;
  (b) blades;
  (c) nacelles;
  (d) yaws;
  (e) hubs;
  (f) rotors;
  (g) sub-station switch gears;
  (h) cables;
  (i) foundation support rings;
  (j) controller and power modules;
  (k) lifts;
  (l) transformers

GENERATORS, wind powered, having a power rating NOT greater than 
750 W, with or without the following:
  (a) voltage regulators;
  (b) electromagnetic brake over current protection;
  (c) battery chargers

STATORS OR ROTORS, being parts for water filled submersible
 borehole pump motors, power rating 1.491 kW or greater but NOT
 exceeding 400.000 kW

PARTS FOR AC MOTORS exceeding 60 Hz, being parts for goods
 classified under heading 8508, being ANY of the following:
   (a) rotors;
   (b) rotor fans;
   (c) rotor pinions;
   (d) rotor shafts;
   (e) stators

PARTS, POWER TOOL, AC MOTOR, being ANY of the following:
   (a) armatures (rotors), whether or not fitted with ANY of the
       following:
              (i) fans;
             (ii) bearings;
            (iii) spacers;
             (iv) washers;
              (v) seals;
             (vi) stop rings;
            (vii) pins;
           (viii) baffle plates; or
             (ix) bushes;
   (b) fields (stators), whether or not fitted with ANY of the
       following:
              (i) cables;
             (ii) connectors;
            (iii) garter springs; or
             (iv) cable protectors;
   (c) fans;
   (d) baffle plates; or
   (e) terminal bases

PARTS, MOTOR, AC, CLUTCH, INDUCTION, being ANY of the following:
   (a) rotor;
   (b) frame;
   (c) medallion;
   (d) bracket;
   (e) stator;
   (f) terminal board;
   (g) end cover;
   (h) bushing;
   (i) light receptacle;
   (j) fly wheel;
   (k) clutch lining;
   (l) clutch plate mounting base;
   (m) clutch plate;
   (n) clutch shaft;
   (o) shaft sleeve;
   (p) key;
   (q) clutch adjusting sleeve;
   (r) pulley side end bracket;
   (s) clutch end cover retainer;
   (t) brake shoe;
   (u) clutch lever;
   (v) side base;
   (w) belt adjusting bolt;
   (x) vibration absorbing rubber;
   (y) terminal board box;
   (z) cover;
  (aa) belt cover;
  (ab) PVC belt cover;
  (ac) belt cover adjusting plate;
  (ad) protection plate

PARTS, DRIVE UNITS, WHEEL, DUMP TRUCKS having a capacity of 45 t OR
 greater being ANY of the following:
   (a)  pins;
   (b)  bearing caps;
   (c)  clamps;
   (d)  plugs;
   (e)  housings;
   (f)  plates;
   (g)  hubs and caps therefor;
   (h)  armatures;
   (i)  rings;
   (j)  shims;
   (k)  supports;
   (l)  commutators;
   (m)  tubes;
   (n)  bands;
   (o)  collars;
   (p)  deflectors;
   (q)  shafts;
   (r)  punchings;
   (s)  seats;
   (t)  brush holders;
   (u)  arms;
   (v)  sensors;
   (w)  base, speed holder;
   (x)  frame head;
   (y)  sleeves;
   (z)  spacers;
   (aa) bushings;
   (ab) magnet frames;
   (ac) levers;
   (ad) magnetic pickups;
   (ae) baffles;
   (af) rewind kits, armature, comprising ANY of the following:
           (i) armature coils;
          (ii) putty;
         (iii) equalizer;
          (iv) insulator assemblies;
   (ag) caps;
   (ah) coils;
   (ai) straps;
   (aj) poles;
   (ak) shunts;
   (al) bus bars;
   (am) covers

PARTS, ELECTRIC MOTOR, being repair kits, including ALL of the 
following:
  (a) bolts;       
  (b) bearings; 
  (c) clips;    
  (d) coupling; 
  (e) elbows;
  (f) hoses;
  (g) washers;
  (h) o-rings;
  (i) reducer;
  (j) oil seal;
  (k) sleeve

PARTS, GENERATOR, being enclosures, having ALL of the following;
  (a) heaters;
  (b) switches;
  (c) lamps;
  (d) junction boxes;
  (e) fire system

PARTS, WIND TURBINE GENERATOR, being EITHER of the following:
  (a) bush support;
  (b) spacer

PARTS, ELECTRIC MOTOR, being repair kits, including ALL of the 
following:  
  (a) o-ring;
  (b) oil seal;
  (c) pedestal bearings;
  (d) sleeve;
  (e) hoses;
  (f) lock washers;
  (g) band clips;
  (h) elbows;
  (i) reducers;
  (j) bolts

PARTS, ELECTRIC MOTOR, being repair kits, including ALL of the 
following:  
  (a) bearings; 
  (b) oil seal; 
  (c) sleeve;
  (d) elbows;
  (e) adapters;
  (f) o-ring;
  (g) hoses;
  (h) clips;
  (i) bolts;
  (j) reducer;
  (k) washers

PARTS, POWER GENERATORS, rated capacity NOT less than 20 MVA, 
being ANY of the following:
  (a) rotor rim;
  (b) shaft assembly

PARTS, SUBMERSIBLE SLURRY PUMP, being stators

PARTS, MOTOR-GENERATOR, being EITHER of the following:
  (a) rim sheets;
  (b) equalising sheets

PARTS, ELECTRIC MOTOR, being commutators having a maximum 
diameter exceeding 127 cm

PARTS, SYNCHRONOUS MOTOR OR GENERATOR, being ANY of the 
following:
  (a) exciter static unit; 
  (b) exciter rotating unit; 
  (c) coupling unit;
  (d) stator bar

PARTS, ROTOR, being ANY of the following:
  (a) pole damper connections;
  (b) pole wedges

PARTS, GENERATOR, being rotor poles

PARTS, MULTIPHASE ELECTRIC MOTOR, being ANY of the following:
  (a) stators;
  (b) rotors;
  (c) spigot end bearing shields;
  (d) flanged end shields with each having an internal spigot;
  (e) backstops

ROEBEL BARS, UPPER AND/OR LOWER, TURBO GENERATORS OR  
ALTERNATORS, maximum rating greater than 30 000 kVA, with OR 
without connecting bars

PARTS, ELECTRIC MULTI-TURN ACTUATOR, being a housing sub-
assembly consisting of ALL of the following:
  (a) declutch lever;
  (b) encoder;
  (c) encoder drive cartridge;
  (d) control panel;
  (e) control module;
  (f) terminal block;
  (g) power board;
  (h) main board;
  (i) gear case AND electronics covers

PARTS, SYNCHRONOUS MOTOR, gearless, being EITHER of the 
following:
  (a) poles OR pole segments OR pole windings;
  (b) stator coils OR windings

PARTS, ASYNCHRONOUS MOTOR, being EITHER of the following:
  (a) stators including All of the following:
          (i) frame;
         (ii) stator core;
        (iii) stator winding,
  (b) squirrel cage rotors including All of the following:
          (i) shaft;
         (ii) rotor core;
        (iii) rotor winding

PARTS, MULTIPHASE ELECTRIC MOTOR, being ANY of the following:
  (a) stators having an external diameter exceeding 100 mm 
      and NOT exceeding 154 mm;
  (b) rotors with pinion diameter NOT exceeding 16 mm;
  (c) end shields having a diameter exceeding 100 mm and NOT 
      exceeding 150 mm;
  (d) flanges having an internal spigot diameter exceeding 
      100 mm and NOT exceeding 154 mm;
  (e) brake assemblies; 
  (f) hand releases

PARTS, DC MOTOR AND/OR GENERATOR HAVING A POWER OUTPUT EXCEEDING 
375 kW, being ANY of the following:
  (a) brush boxes;
  (b) main poles;
  (c) brush arm sets, consisting of ALL of the following:
          (i) brush holders;
         (ii) brushes;
        (iii) springs,
  (d) equalizer coils;
  (e) armature coils;
  (f) frames;
  (g) commutating poles;
  (h) commutating coils;
  (i) pole face connectors;
  (j) main field coils AND poles

PARTS, FUEL CELL MODULES, being ANY of the following:
  (a) fuel cells;
  (b) fuel cell module base plates;
  (c) fuel cell module top plates;
  (d) fuel cell module interconnects;
  (e) fuel cell module cover plates;
  (f) fuel cell module stepped cover plates

PARTS, LINEAR ACTUATOR, being ANY of the following:
  (a) pistons;
  (b) populated printed circuit boards;
  (c) moulded linear actuator covers;
  (d) moulded linear actuator bases;
  (e) moulded linear actuator backs

PARTS, TURBO GENERATOR, being rough machined forged rotor 
retaining rings OR rotor end caps

PARTS, ELECTRICAL ACTUATOR, LIFTING AND LOWERING, being spindles 
with gears

PARTS, ELECTRIC ACTUATOR, LIFTING AND LOWERING, being spindles

PARTS, POWER GENERATORS having a capacity NOT less than 350 MW, 
being ANY of the following:
  (a) stator windings;
  (b) current transformers;
  (c) rotors;
  (d) brush gear;
  (e) hydrogen coolers;
  (f) high voltage bushings;
  (g) transducers;
  (h) controllers

PARTS, POWER GENERATOR, having a minimum capacity of NOT less 
than 200 MW, being ANY of the following:
  (a) air gap search coil probes;
  (b) coil end connection water boxes;
  (c) coil supports;
  (d) core laminates;
  (e) cover plates;
  (f) end winding bracings;
  (g) lock plates;
  (h) manifold clamps;
  (i) manifolds;
  (j) packing blocks;
  (k) phase ring blocks;
  (l) phase ring droppers;
  (m) phase rings;
  (n) rotor coils;
  (o) rotors;
  (p) search coils;
  (q) separators;
  (r) stator coils;
  (s) stators;
  (t) support rings;
  (u) taper slides;
  (v) wedges and fillers;
  (w) winding supports;
  (x) slot insulations

PARTS, DC ROLLING MILL MOTOR, being ANY of the following:
  (a) brush boxes;
  (b) carbon brushes;
  (c) main poles;
  (d) commutating poles;
  (e) pole pitches;
  (f) armature bars;
  (g) bearing labyrinths seals;
  (h) bearing shells;
  (i) couplings;
  (j) brush arm sets, comprising ALL of the following:
         (i) brush holders;
        (ii) brushes;
       (iii) springs

PARTS, GENERATOR, TURBINE, direct hydrogen cooled, having an 
active power output NOT less than 270 MW, being ANY of 
the following:
  (a) coil supports;
  (b) end winding bracings;
  (c) packing blocks;
  (d) phase ring blocks;
  (e) phase ring droppers;
  (f) parallel/phase rings;
  (g) slot insulation;
  (h) sealing bushings;
  (i) under end bell insulation;
  (j) up shaft lead insulation;
  (k) separators;
  (l) stator coils;
  (m) winding supports;
  (n) stator bars

PARTS, GENERATOR, being EITHER of the following:
  (a) foundation beams;
  (b) base frames and/or plates

PARTS, WIND-TURBINE POWERED GENERATOR, being EITHER of the  
following:                                                  
  (a) hubs;                                                 
  (c) chassis beams

PARTS, GENERATOR, being EITHER of the following:
   (a) stators;
   (b) rotors

PARTS, 450 MW CAPACITY OR GREATER POWER GENERATORS, being ANY of the
 following:
   (a) air gap search coil probes;
   (b) coil end connection water boxes;
   (c) coil supports;
   (d) core laminations;
   (e) cover plates;
   (f) end winding bracings;
   (g) lock plates;
   (h) manifold clamps;
   (i) manifolds;
   (j) packing blocks;
   (k) phase ring blocks;
   (l) phase ring droppers;
   (m) phase rings;
   (n) rotor coils;
   (o) rotors;
   (p) search coils;
   (q) separators;
   (r) stator coils;
   (s) stators;
   (t) support rings;
   (u) taper slides;
   (v) wedges;
   (w) winding supports

BALLAST TRAYS, electronic, having BOTH of the following:
  (a) multi-regulating ballast;
  (b) fan

BALLASTS, ELECTRONIC, HIGH INTENSITY DISCHARGE(HID) XENON LAMP, 
having a ballast voltage NOT less than 9 V and NOT greater than 
33 V

BALLASTS, electronic, dimmable

TRANSFORMER MODULES, SUBSEA COMPRESSION STATION, having BOTH of 
the following:
  (a) operating depth NOT less than 1 000 metres
  (b) power handling capacity NOT greater than 650 kVA

CURRENT TRANSFORMERS, having a maximum system voltage rating NOT 
less than 72 kV and NOT greater than 421 kV

TRANSFORMERS, INSTRUMENT, CURRENT AND/OR VOLTAGE, power capacity 
NOT greater than 5 kVA, having ANY of the following:
  (a) current transformer having a rating GREATER
      than 400 kV;
  (b) voltage transformer having a rating GREATER
      than 72 kV;
  (c) combined current/voltage transformer having a
      rating GREATER than 72 kV

INSTRUMENT TRANSFORMERS, being EITHER of the following:
   (a) current transformers having a voltage rating GREATER than
       420 kV;
   (b) voltage transformers having a voltage rating GREATER than
       72 kV

TRANSFORMERS, on-load stepless variable voltage, having ALL of 
the following:
  (a) rotating core;
  (b) three phase;
  (c) power handling capacity NOT less than 2 000 kVa and NOT 
      greater than 4 000 kVa

TRANSFORMERS, on-load stepless variable voltage, having ALL of 
the following:
  (a) NOT greater than three rotating cores having sliding 
      contacts;
  (b) independent phase voltage adjustment;
  (c) power handling capacity NOT less than 30 kVA 
      and NOT greater than 5 000 kVA

TRANSFORMERS, on load stepless variable voltage, rotating core, 
three phase, power handling capacity NOT less than 5 000 kVa and 
NOT greater than 6 000 kVa

TRANSFORMER MODULES, SUBSEA COMPRESSION STATION, having BOTH of 
the following:
  (a) operating depth NOT less than 1 000 metres
  (b) power handling capacity NOT less than 10 000 kVA

TRANSFORMERS, LIQUID DIELECTRIC, electric arc furnace

POWER SUPPLIES, computer controlled, providing constant voltage to
 3 000 V, constant current to 300 mA and constant power to 400 W

BALUNS, ferrite, television reception, impedance conversion
 75 ohms to 300 ohms

AUTOTRANSFORMERS, toroidal core, continuously variable from zero
 voltage

TRANSFORMERS, radio frequency, power rating 100 W continuous,
 frequency range 1.4 MHz or greater but NOT exceeding 200.0 MHz,
 input impedance 75 ohms, output impedance 50 ohms

TRANSFORMERS, output, ferrite core, frequency within the range
 20 - 50 KHz inclusive, nominal power rating NOT greater than 100 W

TRANSFORMERS, RF pulse, dual in-line packaging (DIP), toroidal core

TRANSFORMERS, CURRENT, gas insulated, having a power handling 
capacity NOT exceeding 1 kVA, being current transformers having 
a kV rating NOT less than 72 kV

CURRENT TRANSFORMER MODULES, having a power capacity NOT 
exceeding 1 kVA, with OR without voltage 
measurement outputs, having BOTH of the following:
  (a) current NOT greater than 650 A;
  (b) NOT greater than 4 poles

TRANSFORMERS, ELECTRICAL OUTDOOR, cast resin, including ALL of 
the following:
  (a) rated voltage (between phases) NOT less than 10 kV;
  (b) maximum voltage (between phases) NOT less than 40.5 kV;
  (c) frequency NOT less than 50 Hz and NOT greater than 60 Hz;
  (d) maximum power handling capacity NOT greater than 500 VA

TRANSFORMERS, DOORBELL CHIME, DIN rail OR surface mounted, 
having ALL of the following:
  (a) input voltage range NOT less than 220 V and NOT greater 
      than 240 V;
  (b) output voltage range NOT less than 8 V and NOT greater 
      than 12 V;
  (c) secondary current range NOT less than 0.5A and NOT 
      greater than 2A

TRANSFORMERS, LED, NOT less than 24 V DC and NOT greater than
35 V DC

TRANSFORMERS, TOROIDAL, STEP DOWN, isolated OR auto-wound, 
enclosed, complying with Australian and New Zealand Standards 
AS/NZS 61558.1:2008, AS/NZS 3820:2009 AND AS/NZS 3191:2008, 
including ALL of the following:
  (a) input voltage NOT less than 230 V and NOT greater than 
      250 V;
  (b) output voltage NOT less than 100 V and NOT greater than
      120 V;
  (c) female 3 slot output chassis sockets rated at NOT greater
      than 20 A;
  (d) rated Voltage Amps NOT less than 0.05 kVA and NOT greater
      than 4 kVA;
  (e) thermal fuse or thermal cut out overload protectors

TRANSFORMERS, CURRENT AND/OR VOLTAGE, having ANY of the 
following:
  (a) current transformer voltage rating GREATER
      than 400 kV;
  (b) voltage transformer voltage rating GREATER
      than 72 kV;
  (c) combined current and voltage transformer voltage
      rating GREATER than 72 kV

BALUNS, FERRITE, TRANSMISSION LINE

AUTOTRANSFORMERS, toroidal core, continuously variable from zero
 voltage

TRANSFORMERS, high voltage, 50 Hz, having ALL of the following:
   (a) continuous duty;
   (b) vacuum cast high voltage coil;
   (c) current limited output and input with non-linear voltage/
       current output characteristics
 but NOT including cold cathode electric discharge lamp
 transformers and lighting system transformers as described in
 AS3143-1982

TRANSFORMERS, TOROIDAL, STEPDOWN, isolated, enclosed, complying 
with Australian and New Zealand Standard 61558 (AS/NZS 
61558.1:2008), having ALL of the following:
  (a) input voltage NOT less than 230 V and NOT greater than 
      250 V;
  (b) Australian input flex and plug;
  (c) output voltage NOT less than 100 V and NOT greater than
      120 V;
  (d) dual American female output chassis sockets each rated
      at 20 A;
  (e) rated Voltage Amps exceeding 1 kVA and NOT greater
      than 4 kVA;
  (f) thermal overload and fuse protected

AUTOTRANSFORMERS, toroidal core, continuously variable from zero
 voltage

PLATE TRANSFORMERS, DRYING MACHINE, radio frequency, with a 
power output NOT greater than 75 kW

TRANSFORMERS, VOLTAGE, having ALL of the following:
  (a) gas insulated; 
  (b) primary voltage NOT less than 66 kV; 
  (c) secondary voltage NOT greater than 1 000 V;
  (d) output voltage NOT greater than 220 kVA

CURRENT TRANSFORMER MODULES, with OR without voltage measurement 
outputs, having NOT greater than 4 poles

TRANSFORMERS, having ALL of the following:
  (a) rating NOT less than 110 kVA;
  (b) frequency NOT less than 55 Hz;
  (c) primary voltage NOT less than 440 V;
  (d) primary current NOT less than 230 A;
  (e) secondary voltage NOT greater than 85 100 kV

TRANSFORMERS, dry type, dielectric, having ALL of the following:
  (a) input voltage NOT less than 400 V AC and NOT greater than 
      430 V AC; 
  (b) rated power NOT less than 610 kVA;
  (c) output voltage NOT less than 3 V AC and NOT greater than
      15 V AC;
  (d) input frequency NOT less than 45 Hz at 415 V AC

TRANSFORMERS, vacuum pressure impregnated, dry type, having ALL 
of the following:
  (a) power rating NOT less than 1 250 kVA;
  (b) rated voltage on no-load NOT less than 690 V;
  (c) current rating NOT less than 1 046 A

TRANSFORMERS, having ALL of the following: 
  (a) primary and secondary winding;       
  (b) primary voltage NOT less than 500 kV;
  (c) greater than 330 MVA rating

CHARGE STATION, ELECTRIC MOTOR VEHICLE BATTERIES, output voltage 
NOT less than 150 VDC and NOT greater than 920 VDC, 
being EITHER of the following:
  (a) car chargers having an operating temperature NOT less 
      than -35 degrees Celsius and NOT greater than 55 degrees 
      Celsius, including ALL of the following:
           (i) module power NOT less than 110 kW and NOT greater
              than 600 kW;
          (ii) charge capability 400 V cars at 150 kW;
         (iii) maximum DC output current per charge post NOT 
               exceeding 500 A;
          (iv) input voltage NOT greater than 450 VAC;
  (b) heavy vehicle chargers having an operating temperatures 
      NOT less than -35 degrees Celsius and NOT greater than 50 
      degrees Celsius with OR without automated 4-pole rooftop
      connection INCLUDING ALL of the following:
           (i) module power NOT less than 50 kW and NOT greater 
               than 600 kW;
          (ii) output current, per 150kW module, NOT greater than
               250 A;
         (iii) input voltage NOT greater than 450 VAC;

PICK-UP TOOLS, magnetic, but NOT including those having a lifting
 capacity of 100kg or more.

DEACTIVATION PADS, for electric or magnetic deactivation of labels
 on merchandise

ARTICLES, unmagnetised iron neodymium boron

MAGNETS, rare earth, having a weight NOT exceeding 1 g

MAGNETS, permanent, containing NOT less than 5% samarium cobalt

BARS OR BALLS, magnetic, being accessories for stirring apparatus

ARTICLES, ANTI-THEFT SECURITY, electro-magnetic field, being ANY of
 the following:
   (a) tags;
   (b) labels;
   (c) safers;
   (d) magnetically sensitised strips

DETECTION STRIPS, magnetically sensitised

MAGNETIC BASES, PERMANENT, equipped with an on/off control, but NOT
 including EITHER of the following:
   (a) goods based on neodymium iron boron rare earth magnets;
   (b) lifters having a capacity exceeding 50 kg

MAGNETS, PERMANENT, SMALL TOY, in a variety and assorted sizes,
 colours and shapes (i.e. hearts, triangles, spheres, stars, marbles,
 wands, horseshoes, strips, bars, rings, discs, etc) being coated
 with PVC or uncoated, put up in retail packs as toys either
 individually or in sets or kits with or without small quantities
 of assorted steel items (e.g. washers, nuts, paperclips) iron
 filings

MEMO HOLDERS, magnetic, with magnetic base of strontium ferrite

BARRIERS, RAIL TRACK, including ALL of the following:
  (a) housing with magnet;
  (b) stanchions;
  (c) clamping blocks;
  (d) type plate;
  (e) adjusting bolt;
  (f) tie wraps; 
  (g) tubes with bayonet coupling

MAGNETS, neodymium

MOUNTING UNITS, MOBILE PHONE OR COMPUTER TABLET OR GPS, 
incorporating a neodymium magnet

KNIFE RACKS, magnetic, wall mounted, having outer rubber cover

LIFTERS, magnetic, permanent

MAGNETIC PRODUCTS, incorporating magnets, NOT having a composition
 of long pile fabric, being EITHER of the following:
   (a) body straps;
   (b) body patches

MAGNETS, magnetised or unmagnetised of strontium ferrite or
 barium ferrite (ceramic) having a volume of 8 cu cm or greater

RINGS, loudspeaker, ferrite

BARIUM FERRITE, magnetised, in planar form, being ANY of the
 following:
   (a) agglomerated with synthetic polymer, width NOT exceeding
       50 mm, adhesive backed;
   (b) agglomerated with synthetic polymer, width 50 mm or greater;
   (c) agglomerated with nitrile rubber laminated to steel foil

DRAPES OR NEEDLE BOARDS, magnetic, operating theatre

MAGNETS, toy, put up in retail pack, comprising a model and/or
 interchangeable garments

CLIPS, magnetic

FRAMES, PHOTO, magnetic

MAGNETS, FRIDGE

CELLS OR BATTERIES, primary, but NOT including ANY of the
 following:
   (a) batteries, nominal voltage 6 V, fitted with screw or
       spiral spring terminals;
   (b) cells or batteries, water activated, air depolarised,
       having a rated capacity of 1 000 A.h or greater but NOT
       exceeding 10 000 A.h

CELLS OR BATTERIES, primary, but NOT including ANY of the following:
   (a) cells, cylindrical, nominal voltage 1.3 V or greater but NOT
       exceeding 3.5 V, having ANY of the following dimensions:
     (i) height 48 mm or greater but NOT exceeding 52 mm, dia 13 mm
         or greater but NOT exceeding 15 mm;
    (ii) height 46 mm or greater but NOT exceeding 52 mm, dia 24 mm
         or greater but NOT exceeding 28 mm;
   (iii) height 58 mm or greater but NOT exceeding 64 mm, dia 32 mm
         or greater but NOT exceeding 36 mm;
 For the purposes of TC 9601883 the dimensions in (i), (ii), or (iii)
 cover cells commonly referred to as AA, C or D size;
   (b) batteries, nominal voltage 16 V or greater but NOT exceeding
       17 V and having external dimensions as follows:
     (i) length 67 mm or greater but NOT exceeding 73 mm;
    (ii) width 52 mm or greater but NOT exceeding 56 mm;
   (iii) depth 17 mm or greater but NOT exceeding 20 mm;
   (c) cells or batteries, water activated, air depolarised, having
       a rated capacity of 1 000 A.h or greater but NOT exceeding
       10 000 A.h;
   (d) batteries having a cubic volume of 300 cu cm or greater

ACCUMULATORS, lead-calcium, 12 V, filled AND charged, with OR 
without charge state indicator, including BOTH of the following:
  (a) amp hours NOT exceeding 120 AH;
  (b) amps NOT exceeding 580 A

ACCUMULATORS, lead acid, 12 V, having all of the following:
  (a) valve regulated (sealed);
  (b) immobilised electrolyte;
  (c) absorbent glass mat separators

ACCUMULATORS, MOTORCYCLE OR MOTOR SCOOTER, 6 V but NOT including
 accumulators having ANY of the following electrical capacities:
   (a) 13 A.h to 15 A.h (both inclusive) at the 20 h rate;
   (b) 11.7 A.h to 14.1 A.h (both inclusive) at the 10 h rate

ACCUMULATORS, MOTOR CYCLE OR MOTOR SCOOTER, having EITHER of the
 following:
   (a) capacity of 20 A.h or less at the 20 hour rate;
   (b) a dry weight less than 5 kg

ACCUMULATORS, lead acid, marine type, permanently sealed, gelled
 electrolyte, having ALL of the following:
   (a) 12 V nominal voltage;
   (b) stainless steel stud terminals;
   (c) one way pressure relief valve or vent;
   (d) a nominal capacity exceeding 62 A.h at the 20 h rate;
   (e) capable of being recharged in any position

ACCUMULATORS, MARINE, lead acid, 12 V, having all of
the following:
  (a) valve regulated (sealed);
  (b) immobilised electrolyte;
  (c) absorbent glass mat separators;
  (d) spiral wound plates

JUMP STARTERS, portable, incorporating NOT less than ANY 2 of 
the following:
  (a) lead acid battery;
  (b) output sockets;
  (c) jumper leads;
  (d) battery charging meters;
  (e) charging adaptors;
  (f) emergency light;
  (g) air compressor

ACCUMULATORS, valve regulated lead acid, having ALL of the 
following:
  (a) nominal voltage NOT less than 12 V;
  (b) length NOT less than 525 mm;
  (c) weight NOT less then 55 kg

ACCUMULATORS, 12 V, having ALL the following:
  (a) length NOT less than 408 mm;
  (b) weight NOT less than 24 kg;
  (c) acid capacity NOT less than 6 litres

JUMP STARTERS, portable, comprising ALL of the following:
  (a) lead acid battery;
  (b) output sockets;
  (c) jumper leads;
  (d) battery charging meters;
  (e) charging adaptors;
  (f) emergency lights

BATTERIES, MOTORCYCLE

ACCUMULATORS, lead acid, including gel and lead calcium types,
 permanently sealed, rechargeable, capacity NOT exceeding 11 A h
 at the 20 h rate

BATTERIES, lead/acid, 12V

ACCUMULATORS, lead acid, valve regulated (sealed), immobilised
 electrolyte, 6 cell, 12 volt, having ALL of the following:
   (a) absorbent glass matt separators;
   (b) flame arresting one way pressure relief valve or vent;
   (c) a capacity of OR exceeding 33 Ah at the 20 hour rate
       but NOT exceeding 100 Ah at the 20 hour rate
 NOTE:
 For the purpose of this concession voltage and capacity are
 expressed in accordance with section 1, para 1.4 and section 3,
 para 3.1 of AS4029.2 - 1992

ACCUMULATORS, lead acid, valve regulated (sealed), gelled
 electrolyte with phosphoric acid additive, 6 cell, 12 volt,
 incorporating a one way pressure relief valve or vent, having a
 capacity of OR exceeding 31 Ah at the 20 hour rate but NOT exceeding
 100 Ah at the 20 hour rate
 NOTE:
 For the purpose of this concession voltage and capacity are
 expressed in accordance with section 1, para 1.4 and section 3,
 para 3.1 of AS4029.2 - 1992

ACCUMULATORS, DEEP DISCHARGE, MINERS CAP LAMP, 4 V, capacity NOT
 exceeding 18 A.h at 1 A rate of discharge

ACCUMULATORS, LEAD ACID, valve regulated, absorbed electrolyte OR
 immobilised (gelled) electrolyte, 6 cell, 12 V, capacity NOT
 exceeding 33 Ah at the 20 hour rate
 For the purpose of this order, voltage and capacity are expressed in
 accordance with Section 1, paragraph 1.4 and Section 3, paragraph
 3.1 of AS 4029.2 - 1992

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid,
 rechargeable, having ALL of the following:
   (a) 6 Volt nominal;
   (b) nominal capacity 20 Ah @ 20 hour rate;
   (c) leak proof moulded case;
   (d) operable in any position;
   (e) nominal dimensions 157 mm x 83 mm X 125 mm

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid,
 rechargeable, having ALL of the following:
   (a) 12 Volt nominal;
   (b) nominal capacity 33 Ah @ 20 hour rate;
   (c) leak proof moulded case;
   (d) operable in any position;
   (e) nominal dimensions 197 mm x 132 mm x 182 mm

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid,
 rechargeable, having ALL of the following:
   (a) 12 V nominal;
   (b) nominal capacity 15-17 Ah @ 20 hr rate;
   (c) leakproof moulded case;
   (d) operable in any position;
   (e) nominal dimensions 167 mm x 76 mm x 181 mm

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid,
 rechargeable, as follows:
   (a) 12 V nominal;
   (b) nominal capacity 24 to 26 Ah @ 20 hr rate;
   (c) leakproof moulded case;
   (d) can be operated in any position;
   (e) nominal dimensions 175 mm x 166 mm x 125 mm

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid,
 rechargeable, having ALL of the following:
   (a) 12 V nominal;
   (b) nominal capacity 18 Ah @ 20 hours rate;
   (c) leakproof moulded case;
   (d) can be operated in any position;
   (e) nominal dimensions 180 mm x 75 mm x 167 mm

ACCUMULATORS/BATTERIES, absorbed electrolyte lead acid, rechargeable
 as follows, having ALL of the following:
   (a) 12 V nominal;
   (b) nominal capacity 12 Ah @ 20 hours rate;
   (c) leakproof moulded case;
   (d) can be operated in any position;
   (e) nominal dimensions 151 mm x 98 mm x 97.5 mm

UNINTERRUPTIBLE POWER SUPPLY BATTERY MODULES, battery pack with 
enclosed cabinet, having ALL of the following:
  (a) valve release lead acid rechargeable 
      batteries;
  (b) temperature sensors;
  (c) self-configuration battery identification device

BATTERY STRINGS, modular, having four enclosed valve release 
lead acid battery cartridges

BATTERIES, lead acid, having ANY of the following:
  (a) positive plates AND negative copper stretched metal 
      plate;
  (b) double separation plates having microporous AND corrugated 
      separators;
  (c) 2 V cells with nominal capacities NOT less than 160 Ah and
      NOT greater than 3 480 Ah at C/10

BATTERIES, ELECTRIC VEHICLE, having a maximum voltage capacity 
NOT less than 10 V and NOT greater than 100 V

CELLS, ACCUMULATOR, 2 V OR 4 V OR 8 V, being lead acid 
traction cells

ACCUMULATORS, sealed, lead acid, having BOTH of the following:
   (a) regulated valves;
   (b) voltage NOT less than 2 volts

BATTERIES, lead acid, having BOTH of the following:
  (a) voltage NOT less than 216 volts;            
  (b) capacity NOT less than 2 520 ampere hours

ACCUMULATORS, LEAD ACID, Nominal Voltage 6 Volt

ACCUMULATORS, nickel cadmium, single cell, sintered plate, sealed,
 capacity NOT exceeding 7 A.h, but NOT including cylindrical cell
 accumulators of dimensions included in Column 1 of THE TABLE or
 of type listed in Column 2 of THE TABLE:
                          THE TABLE
 Column 1                              Column 2
 (a) height 48 mm or greater but       commonly known as AA size;
     NOT exceeding 51 mm AND dia
     13 mm or greater but NOT
     excluding 15 mm;
 (b) height 48 mm or greater but       commonly known as C size;
     NOT exceeding 50 mm AND dia
     24 mm or greater but NOT
     exceeding 27 mm;
 (c) height 58 mm or greater but       commonly known as D size
     NOT exceeding 62 mm AND dia
     32 mm or greater but NOT
     exceeding 35 mm

ACCUMULATORS, nickel cadmium, sealed, having ALL of the
 following:
   (a) 24 V;
   (b) capacity NOT exceeding 5.0 Ah;
   (c) 20 cells

BATTERIES, nickel cadmium, "AA" size, rechargeable

BATTERY PACKS, POWER TOOL, nickel cadmium, being EITHER of the
 following:
   (a) 9.6 V or 12 V, 1.4 A.h;
   (b) 14.4 V, 2.0 A.h or 4.0 A.h

ACCUMULATORS, NICKEL CADMIUM, sealed, moulded case, having inbuilt
 terminal connectors, being ANY of the following:
   (a) having ALL of the following:
          (i) 9.6 V + or - 10%;
         (ii) 1.2 Ah + or - 10%;
        (iii) 8 cells;
         (iv) dimensions NOT exceeding 142 mm x 80 mm x 60 mm;
   (b) having ALL of the following:
          (i) 7.2 V + or - 10%;
         (ii) 1.2 Ah + or - 10%;
        (iii) 6 cells;
         (iv) dimensions NOT exceeding 72 mm x 97 mm x 57 mm;
   (c) having ALL of the following:
          (i) 2.4 V + or - 10%;
         (ii) 1.2 Ah + or - 10%;
        (iii) 2 cells;
         (iv) dimensions NOT exceeding 102 mm x 42 mm x 32 mm;
   (d) having ALL of the following:
          (i) 12 V + or - 10%;
         (ii) 1.7 Ah + or - 10%;
        (iii) 10 cells;
         (iv) dimensions NOT exceeding 97 mm x 85 mm x 85 mm;
   (e) having ALL of the following:
          (i) 12 V + or - 10%;
         (ii) 2 Ah + or - 10%;
        (iii) 10 cells;
         (iv) dimensions NOT exceeding 97 mm x 85 mm x 85 mm;
   (f) having ALL of the following:
          (i) 12 V + or - 10%;
         (ii) 1.2 Ah + or - 10%;
        (iii) 10 cells;
         (iv) dimensions NOT exceeding 89 mm x 85 mm x 85 mm;
   (g) having ALL of the following:
          (i) 9.6 V + or - 10%;
         (ii) 1.2 Ah + or - 10%;
        (iii) 8 cells;
         (iv) dimensions NOT exceeding 89 mm x 77 mm x 75 mm;
   (h) having ALL of the following:
          (i) 9.6 V + or - 10%;
         (ii) 1.7 Ah + or - 10%;
        (iii) 8 cells;
         (iv) dimensions NOT exceeding 97 mm x 77 mm x 75 mm;
   (i) having ALL of the following:
          (i) 15.6 V + or - 10%;
         (ii) 2 Ah + or - 10%;
        (iii) 13 cells;
         (iv) dimensions NOT exceeding 105 mm x 98 mm x 86 mm;
   (j) having ALL of the following:
          (i) 24 V + or - 10%;
         (ii) 2 Ah + or - 10%;
        (iii) 20 cells;
         (iv) dimensions NOT exceeding 110 mm x 107 mm x 102 mm;
   (k) having ALL of the following:
          (i) 9.6 V + or - 10%;
         (ii) 1.7 Ah + or - 10%;
        (iii) 8 cells;
         (iv) dimensions NOT exceeding 142 mm x 80 mm x 60 mm

BATTERY PACKS, POWER TOOL, nickel cadmium, DC, being ANY of the
 following:
   (a) having ALL of the following:
            (i) 9.6 V;
           (ii) 1.7 Ah or 2.0 Ah;
          (iii) 8 cell;
   (b) having ALL of the following:
            (i) 12 V;
           (ii) 1.7 Ah or 2.0 Ah;
          (iii) 10 cell;
   (c) having ALL of the following:
            (i) 7.2 V;
           (ii) 1.7 Ah;
          (iii) 6 cell

BATTERY PACKS, POWER TOOL, nickel cadmium, DC, having permanently
 sealed cases, with in-built terminal connections, being ANY of the
 following:
   (a) having ALL of the following:
           (i) 9.6 V;
          (ii) amp/hour capacities from 1.2 Ah to 2.0 Ah;
         (iii) 8 cells;
          (iv) non rectangular shape,
   (b) having ALL of the following:
           (i) 12 V;
          (ii) amp/hour capacities from 1.2 Ah to 2.0 Ah;
         (iii) 10 cells;
          (iv) non rectangular shape,
   (c) having ALL of the following:
           (i) 14.4 V;
          (ii) amp/hour capacities from 1.2 Ah to 2.0 Ah;
         (iii) 12 cells;
          (iv) non rectangular shape,
   (d) having ALL of the following:
           (i) 15.6 V;
          (ii) amp/hour capacities from 1.2 Ah to 2.0 Ah;
         (iii) 13 cells;
          (iv) non rectangular shape,
   (e) having ALL of the following:
           (i) 7.2 V;
          (ii) amp/hour capacities from 1.2 Ah to 2.0 Ah;
         (iii) 6 cells;
          (iv) non rectangular shape

ACCUMULATORS, nickel cadmium, single cell, sintered plate, sealed,
 capacity NOT exceeding 7 A.h

ACCUMULATOR CELLS, nickel cadmium, cylindrical, but NOT including
 AA size accumulator cells

ACCUMULATORS, nickel cadmium, single cell, cylindrical, but NOT
 including accumulators having terminals which protrude from the end
 of the cell

ACCUMULATORS, nickel cadmium, as follows:
   (a) having ALL of the following:
          (i) 7.2 V nominal;
         (ii) permanently sealed;
        (iii) 6 cells;
         (iv) moulded case;
          (v) specific inbuilt terminal connectors;
         (vi) nominal dimensions 140 mm x 48.5 mm x 28 mm
                 OR
   (b) having ALL of the following:
          (i) 9.6 V nominal;
         (ii) permanently sealed;
        (iii) 8 cells;
         (iv) moulded case;
          (v) specific inbuilt terminal connectors;
         (vi) nominal dimensions 182 mm x 48.5 mm x 28 mm
                 OR
   (c) having ALL of the following:
          (i) 9.6 V nominal;
         (ii) permanently sealed;
        (iii) 8 cells;
         (iv) moulded case;
          (v) specific inbuilt terminals;
         (vi) non-rectangular
                  OR
   (d) having ALL of the following:
          (i) 12 V nominal;
         (ii) permanently sealed;
        (iii) 10 cells;
         (iv) moulded case;
          (v) specific inbuilt terminals;
         (vi) non-rectangular
                  OR
   (e) having ALL of the following:
          (i) 10.8 V nominal;
         (ii) permanently sealed;
        (iii) 9 cells;
         (iv) moulded case;
          (v) specific inbuilt terminals;
         (vi) nominal dimensions 104 mm x 104 mm x 52 mm
                  OR
   (f) having ALL of the following:
          (i) 14.4 V nominal;
         (ii) 12 cells;
        (iii) moulded case;
         (iv) specific inbuilt charging terminal;
          (v) inbuilt cable connected output terminal;
         (vi) nominal dimensions 208 mm x 165 mm x 40 mm

NICKEL CADIUM CELLS, rechargeable, with OR without ANY of the 
following:
  (a) racks;
  (b) cabinets;
  (c) connectors;
  (d) terminals;
  (e) insulators;
  (f) plastic covers AND/OR caps;
  (g) washers

ACCUMULATORS, nickel cadmium, having BOTH of the following:
  (a) block configurations NOT greater than 6 cells;
  (b) polypropylene case

ACCUMULATORS, nickel cadmium, having BOTH of the following:
  (a) NOT less than 2.4 V;
  (b) NOT greater than 7 A.h

PACKS, ACCUMULATOR, nickel cadmium, incorporating a moulded case

ACCUMULATORS, rechargeable, nickel cadmium, having ALL of the
 following:
   (a) moulded case;
   (b) sealed plastic housing;
   (c) inbuilt terminal connectors with discharge terminals arranged
       horizontally

ELECTRIC ACCUMULATORS, comprising ALL of the following:
  (a) nickel oxide cathode;
  (b) iron anode;
  (c) alkaline electrolyte;
  (d) 1.2 volts per cell

ACCUMULATORS, nickel-metal hydride

ENERGY BATTERIES, lithium-ion, having ALL of the following: 
  (a) voltage NOT less than 70.8 V and NOT greater than 80.5 V; 
  (b) current capacity NOT less than 50 Ah; 
  (c) weight NOT less than 30 kg and NOT greater than 45 kg

ACCUMULATORS, lithium iron phosphate, aluminium OR steel 
enclosure, having ALL of the following:
   (a) voltage NOT less than 47 volts and NOT greater than 
       57 volts;
   (b) energy capacity NOT less than 5 kWh and NOT greater than  
       80 kWh;
   (c) current capacity NOT less than 100 Ah and NOT greater 
       than 1 600 Ah;
   (d) 1C rated continuous discharge AND charge;
   (e) protection AND isolation shunt circuit breakers;
   (f) embedded battery management system with internal trip 
       protection

ENERGY STORAGE SYSTEMS, lithium-ion, whether OR not assembled, 
having ALL of the following: 
  (a) modular outdoor enclosures; 
  (b) energy storage capacity NOT less than 750 kWh and NOT
      greater than 3 000 kWh per enclosure; 
  (c) AC AND/OR DC system configuration, being ANY of the 
      following:
          (i) cube-to-cube daisy-chain connection;
         (ii) enclosure-to-inverter radial connection;
        (iii) AC block with battery enclosures;
         (iv) plug-in battery enclosures,
  (d) battery-management system

TRACTION BATTERIES, UNDERGROUND AC LOCOMOTIVE, complying with 
Australian Standard AS IEC 62619:2023 (AS IEC 62619:2023), 
including ALL of the following: 
  (a) output module;
  (b) control unit;
  (c) battery management unit;
  (d) carbon monoxide sensors;
  (e) fuses;
  (f) fire detection AND alarm system;
  (g) lithium titanate oxide battery cells having ALL of the
      following:
          (i) rated capacity NOT less than 26 Ah; 
         (ii) operating voltage NOT less than 1.9 V and NOT 
              greater than 2.7 v;
        (iii) maximum current 260 A within 10 seconds,130 A 
              within 600 seconds;
         (iv) operating temperature NOT less than -30 
              degrees Celsius and NOT greater than 55 
              degrees Celsius; 
  (h) ethernet communication interface to plc;
  (i) traction battery dimensions NOT exceeding;
          (i) 1 850 mm width;
         (ii) 1 300 mm length;
        (iii) 550 mm height

BATTERIES AND/OR BATTERY PACKS, lithium-ion, having BOTH of the 
following:
  (a) voltage NOT less than 450 V and NOT greater than 800 V; 
  (b) current capacity NOT less than 45 Ah

BATTERY PACKS, RAILWAY, lithium-ion, liquid cooling, having ALL 
of the following:
  (a) voltage NOT less than 450 V and NOT greater than 900 V;
  (b) current capacity greater than 58 Ah;
  (c) weight NOT less than 500 kg;
  (d) battery management system

BATTERIES AND/OR BATTERY PACKS, lithium ion OR lithium-iron 
phosphate, having BOTH of the following;
  (a) voltage, NOT less than 40 V and NOT greater than 70 V;
  (b) current capacity, NOT less than 400Ah
with OR without ANY of the following;
         (i) heating system;
        (ii) ventilation system;
       (iii) ethernet communication

POWER PACKS, TRANSPORT REFRIGERATION UNIT, having ALL of 
the following:
  (a) lithium iron phosphate batteries;
  (b) axle generator controller;
  (c) electronics conversion AC/DC/AC module;
  (d) battery management system;
  (e) capacity NOT less than 15 kWh;
  (f) discharge power NOT less than 15 kW;
  (g) charge AND discharge voltage 400V/3/50 Hz;
  (h) weight NOT less than 290 kg;
  (i) rechargeable via axle generator AND/OR grid connection

BATTERY PACKS, lithium-ion, having ALL of the following;
  (a) voltage NOT less than 450 V and NOT greater than    
      800 V;
  (b) current capacity NOT less than 130 Ah

ENERGY BATTERIES, lithium-ion, having ALL of the following:
 (a) voltage NOT less than 450 V and NOT greater than 800 V;
 (b) current capacity NOT less than 130 Ah;
 (c) weight NOT less than 590 kg

ACCUMULATORS, lithium-ion, having ALL of the following:  
  (a) nominal voltage NOT less than 30.4 V;
  (b) capacity NOT less than 67 Ah;
  (c) maximum continuous discharge power @ 10.8 kW, with peak
       discharge current of:
            (i) 460 A @ end of discharge voltage;
           (ii) 600 A for 1 second,
  (d) mica AND battery safety functional protection composite
      sheets;
  (e) flame-retardant grade plastic;
  (f) extinguishing sheets;
  (g) degassing vent structure;
  (h) monitoring AND control including ALL of the following:
          (i) temperature sensors;
         (ii) voltage probes;
        (iii) module battery management printed circuit
              board,
  (i) 8 lithium-ion cells, each having ALL of the
      following:
          (i) cell composition AND components;
                 (a) cathode: chemistry (LiMn2O4) with aluminium
                      substrate;
                (b) anode: chemistry (C6) with copper substrate;
                (c) cell enclosure: aluminium,
          (ii) safety features, including ALL of the following:
                 (a) cell fuses;
                 (b) vents;
                 (c) overcharge safety device;
                 (d) retainer;
                 (e) anode AND multi-layered separator

ACCUMULATORS, lithium-ion, having ALL of the following: 
  (a) weight NOT less than 450 kg and NOT greater than 2 160 kg; 
  (b) voltage NOT less than 61 volts and NOT greater than 
      84 volts;
  (c) current capacity NOT less than 370 A/H and NOT greater 
      than 962 A/H

ACCUMULATORS, lithium-ion, having ALL of the following:  
  (a) weight NOT less than 535 kg and NOT greater than
      1 770 kg;  
  (b) voltage NOT less than 44 volts and NOT greater than 
      60 volts; 
  (c) current capacity NOT less than 222 A/H and NOT greater
      than 1 184 A/H

ACCUMULATORS, lithium-ion, having ALL of the following:  
  (a) weight NOT less than 405 kg and NOT greater than 
      1 410 kg;  
  (b) voltage NOT less than 31 volts and NOT greater than 
      43 volts; 
  (c) current capacity NOT less than 222 A/H and NOT greater than
      1 036 A/H

ENERGY STORAGE SYSTEMS, modular, including ALL of the following: 
  (a) lithium-ion batteries; 
  (b) controller;
  (c) energy storage capacity NOT less than 250 kWh;    
  (d) power capacity NOT less than 250 kVA;
  (e) heating AND ventilation AND air conditioning system;
  (f) fire suppression system

BATTERY MODULES, SUBSEA, having ALL of the following:
  (a) battery management system
  (b) lithium-ion cells
  (c) pressure neutral silicone polymer encapsulation
  (d) connectors
  (e) operating depth exceeding 1 000 m
with OR without cell heaters

ENERGY STORAGE SYSTEM, lithium ion, including ALL of the 
following:
 (a) storage unit in a single integrated enclosure having ALL of 
     the following: 
          (i) DC battery cells; 
         (ii) grid-forming DC/AC inverter; 
        (iii) AC circuit breaker; 
         (iv) thermal control by liquid-cooling system; 
  (b) unit power capacity NOT less than 950 kW; 
  (c) unit energy capacity NOT less than 3 800 kWh;
  (d) round trip efficiency NOT less than 91.7% at low voltage
      AC (LVAC) output, including auxiliary consumption during
      the full cycle of a unit; 
  (e) battery fire protection compliant with UL 9540A  
      Standard;   
  (f) safety of secondary lithium cells AND batteries compliant
      with International Electrotechnical Commission Standard 
      62619:2017 (IEC 62619:2017); 
  (g) unit connection point to grid is 480V AC nominal only; 
  (h) unit thermal system solely supplied from the 480V AC unit
      connection point; 
  (i) unit energy density NOT less than 260 kWh/m2; (j) unit
      footprint NOT less than 8 800 mm x 1 650 mm

ACCUMULATORS, having net weight NOT greater than 3.5 kg

ACCUMULATORS, having ALL of the 
following:                            
  (a) lithium nickel cobalt manganese oxide battery pack;  
  (b) energy capacity NOT less than 1 500 kWh;
  (c) weight NOT less than 15 000 kg;
  (d) power distribution AND conversion unit;
  (e) charger interface unit,
with OR without EITHER of the following:
          (i) fire suppression system;
         (ii) thermal cooling system

ACCUMULATORS, lithium-ion, having ALL of the following:
  (a) weight NOT less than 146 kg and NOT greater than 800 kg;
  (b) voltage NOT less than 19 volts and NOT greater than 30 
   volts;
  (c) current capacity NOT less than 74 Ah and NOT greater than 
   740 Ah

ACCUMULATORS, lithium iron phosphate, powder coated aluminium 
enclosure, having ALL of the following:
(a)	  voltage NOT less than 47 volts and NOT greater than 
        57 volts;
  (b)  energy capacity NOT less than 5 kWh and NOT greater than 
        80 kWh;
  (c)  current capacity NOT less than 100 Ah and NOT greater than
        1 600 Ah;
  (d)  1C rated continuous discharge and charge; 
  (e)   protection AND isolation shunt circuit breakers;
  (f)   embedded battery management system with internal trip 
protection;
  (g)  data communication ports AND wireless gateway

BATTERY ENGERY STORAGE SYSTEM, SUBSEA, including 
ALL of the following:
  (a) lithium-ion batteries; 
  (b) battery management system; 
  (c) sensors; 
  (d) pressure relief valve; 
  (e) battery control modules; 
  (f) subsea power AND communications connectors;
  (g) firmware update tool

ACCUMULATORS, net weight NOT greater than 2 kg

ACCUMULATOR RECHARGERS, lithium-ion OR lithium polymer battery 
powered having the following:
  (a) with OR without cables AND/OR connectors;
  (b) accumulator weight NOT greater than 1 kg

ACCUMULATORS, lithium-ion having the following:
  (a)NOT greater than 15 volts output;
  (b)weight NOT greater than 1 kg

ELECTROCHEMICAL POWER GENERATORS, having BOTH of the following:
  (a) hydrogen fuel cell;
  (b) lithium ion iron phosphate battery

ENERGY STORAGE SYSTEM, lithium iron phosphate, including ALL of 
the following:  
  (a) battery packs;
  (b) string collectors;
  (c) power capacity NOT less than 369 kW;
  (d) energy capacity NOT less than 730 kWh;
  (e) heating AND ventilation AND air conditioning units;
  (f) smoke AND hydrogen sensors;      
  (g) vent fans;
  (h) terminal AND circuit breaker box

POWER PACKS, POWER TOOL, having a lithium ion accumulator 
AND backpack, with OR without ANY of the following:
  (a) battery adapters;
  (b) battery chargers;
  (c) chest belts;
  (d) harnesses

BATTERY CELLS, lithium titanate oxide, cylindrical, having a 
rated capacity NOT greater than 46 Ah

ACCUMULATORS, having ALL of the following:
  (a) lithium-ion battery pack with lithium nickel manganese   
      cobalt oxide cathode;
  (b) nominal voltage NOT less than 48 V;
  (c) capacity NOT less than 110 Ah;
  (d) discharge power NOT greater than 6 500 W;
  (e) safety AND control devices including ALL of the following:
         (i) one OR more relays;
        (ii) one OR more fuses;
       (iii) temperature sensors

ACCUMULATOR RECHARGERS, lithium-ion OR lithium polymer battery 
powered, incorporating BOTH of the following:
  (a) USB port AND/OR dual USB port;
  (b) LED flashlight AND/OR LED indicators,
  with OR without cables

SETS, BATTERY RE-CHARGER, LITHIUM-ION, portable, consisting of 
ALL of the following:
  (a) battery re-charger capacity NOT greater than 12 000 mAh;
  (b) clamps, having a voltage capacity NOT less than 12 V;
  (c) USB port AND cable;
  (d) integrated LED flashlight;
  (e) air pump;
  (f) AC/DC chargers

POWER PACKS, portable, having ALL of the following:
  (a) lithium polymer battery capacity NOT less than 7 000 mAh;
  (b) vehicle jumper leads;
  (c) output sockets;
  (d) charging cable with adaptors;
  (e) 240 V AC to 15 V DC battery charger;
  (f) 12 V AND/OR 15 V car cigarette lighter type battery 
charger;
  (g) integrated LED light

ACCUMULATORS, lithium polymer

BATTERY PACKS, CAMCORDER, lithium-ion, with camcorder carry bag

ACCUMULATORS, vanadium pentoxide lithium or carbon lithium, coin
 type, having a height NOT exceeding 3.5 mm

FLOW BATTERIES, vanadium redox, having ALL of the following:
  (a) output capacity NOT less than 10 kWh;
  (b) continuous output NOT less than 3 kW;
  (c) nominal voltage 24 V 
with OR without vanadium electrolyte

ELECTRIC ACCUMULATORS, comprising ALL of the following:
  (a) nickel oxide cathode;
  (b) iron anode;
  (c) alkaline electrolyte;
  (d) 1.2 volts per cell

ACCUMULATORS, NICKEL-ZINC, rechargeable, with OR without ANY of 
the following:
  (a)  pressure relief valves;
  (b)  terminals;
  (c)  plastic cases AND/OR caps

ACCUMULATORS, SODIUM-ION, with OR without ANY of the following: 
  (a) battery management system; 
  (b) storage box; 
  (c) cabling; 
  (d) plugs

BATTERIES, sodium nickel chloride

FLOW BATTERIES, zinc bromide electrolyte, with OR without remote 
monitoring, having ALL of the following:
  (a) power capacity NOT less than and 5 kW peak and NOT greater 
      than 7.5 kW peak;
  (b) operating voltage NOT less than 40 V DC and NOT greater 
      than 60 V DC;
  (c) stored energy NOT less than 8 kWh and NOT greater 
      than 15 kWh

BATTERIES, silicon

BATTERY CELL SEPARATORS

PARTS, REDOX VANADIUM FLOW BATTERY, being cell stacks

PARTS, DEEP CYCLE BATTERY, being positive AND/OR negative formed 
plates having ALL of the following:
  (a) height NOT less than 900 mm;
  (b) width NOT less than 290 mm

BATTERY CELLS, 2 V, traction, lead/acid, electrolyte air
 circulation

VACUUM, WINDOW, hand held, battery powered, including ANY 
one OR more of the following:
  (a) hand held vibration surface cleaner;
  (b) base station;
  (c) suction nozzles;
  (d) charger;
  (e) spray bottle with microfiber wiper;
  (f) wiping cloth;
  (g) cleaning agent concentrate;
  (h) additional battery

VACUUM CLEANERS, water filtration, including ALL of the 
following:
  (a) programmable display screen;
  (b) rubber handle;
  (c) illuminated side windows;
  (d) illuminated water basin;
  (e) rubber wheels

VACUUM CLEANERS, having ALL of the following:
   (a) cordless;
   (b) rechargeable;
   (c) hands free operation;
   (d) ultrasound navigation;
   (e) total operating weight NOT exceeding 5 kg;
   (f) 1.2 litre dust collector;
   (g) charging station

VACUUM CLEANERS, hand held, having a total operating weight NOT
 exceeding 4 kg

VACUUM CLEANERS, portable, having a total operating weight NOT
 exceeding 1 250 grams

VACUUM CLEANERS, rechargeable, cordless, DC operated, having a total
 operating weight NOT exceeding 4 kgs

VACUUM CLEANERS, WET AND/OR DRY, being ANY of the following:
  (a) cylinder;
  (b) barrel;
  (c) upright;
  (d) canister

VACUUM CLEANERS, DRY

VACUUM CLEANERS, DC operated ONLY, having a total operating weight
 NOT exceeding 1 200 g

VACUUM CLEANERS, wet AND/OR dry, with OR without ANY of the 
following:
  (a) crevice tools;
  (b) brushes;
  (c) front cuffs;
  (d) holders;
  (e) hoses;
  (f) nozzles;
  (g) filters;
  (h) bags AND/OR liners;
  (i) sleeves;
  (j) adaptors;
  (k) tubes AND/OR pipes;
  (l) hooks;
  (m) snaps;
  (n) dust extraction

WASTE COLLECTION SUCTION MACHINE, electrically powered, 
including ALL of the following:
  (a) vacuum pump; 
  (b) filter system having BOTH of the following:
          (i) cassette filter
         (ii) filter bags, 
  (c) conical hopper dust bin;
  (d) retractable legs

CLEANERS, VACUUM, industrial

VACUUM CLEANERS, WET AND/OR DRY, being ANY of the following:
  (a) cylinder;
  (b) barrel;
  (c) upright;
  (d) canister

VACUUM CLEANERS, DRY

CLEANERS, VACUUM, industrial

PARTS, VACUUM CLEANER, being ANY of the following:
  (a) floor heads;
  (b) rods;
  (c) powered heads;
  (d) turbo heads;
  (e) bent end pieces

NOZZLES, VACUUM CLEANER

HOSE, CURRENT CARRYING, VACUUM CLEANER, double insulated

TUBES, telescopic

PARTS, VACUUM CLEANER, being a combination floor head, having ALL of
 the following:
   (a) extendable/retractable brushes operated by foot pedal;
   (b) replaceable thread collectors;
   (c) replaceable metal base plate

ATTACHMENTS, for appliances classified under tariff item 8509.40.00

ATTACHMENTS, food preparation machine, being ANY of the
 following:
   (a) chopping blades;
   (b) shredding discs;
   (c) slicing discs

PARTS, BLENDER, being ANY of the following:
(a) containers;
(b) covers;
(c) feeder caps

PARTS, FOOD MIXER AND/OR BLENDER, being ANY of the following:
  (a) processing bowl with blades;
  (b) masher;
  (c) milk frother;
  (d) whisk

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8533488 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

SPARKING PLUGS

MAGNETOS, ignition, automotive engine

MAGNETOS, flywheel, outboard motor

COILS, ignition, marine outboard motors, NOT exceeding 250 g in
 weight

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8636087 it is the importer"s
   responsibility to establish that the parts were
   manufactured 30 years or more prior to the date of
   importation

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) distributors;
  (b) ignition coils

DISTRIBUTORS, with OR without EITHER of the following:
  (a) ignition coils OR modules OR amplifiers;
  (b) crank angle sensors

IGNITION COILS

MOTORS, starter, gear reduction type, having a power rating above
 2 kW or 2.7 hp

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8636086 it is the importer"s
   responsibility to establish that the parts were
   manufactured 30 years or more prior to the date of
   importation

MOTORS, starting, 64 V or 96 V

STARTER MOTORS, electric, inertia driven without solenoid
 assistance

STARTER MOTORS, 6 V, 12 V or 24 V, having a pole housing OD
 of 110 mm or greater

STARTER GENERATORS, dual purpose 6 V or 12 V, DC, belt driven

STARTER MOTORS, rating 32 V

STARTER ALTERNATORS, water-cooled, including BOTH of the 
following:
  (a) electric starter motor;
  (b) alternator

STARTER MOTORS, AUTOMOTIVE

STARTER GENERATORS, ARMOURED MILITARY VEHICLE, 28 V DC, water 
cooled, having BOTH of the following:
  (a) electric output power exceeding 15 kW;
  (b) NOT less than 300 Nm cranking torque at 200 RPM engine 
      speed at a minimum voltage of 18 VDC at the 28 VDC bus 
      interface

STARTER MOTORS

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8636085 it is the importer"s
   responsibility to establish that the parts were
   manufactured 30 years or more prior to the date of
   importation

ALTERNATORS

GENERATORS OR ALTERNATORS, having EITHER of the following:
   (a) a stator diameter of less than 125 mm for 12 V, 24 V or 32 V;
   (b) a stator diameter exceeding 129 mm for 12 V, 24 V or 32 V,
       excluding internal fan alternators with a stator diameter
       of 147 mm

GENERATORS OR ALTERNATORS, having EITHER of the following:
   (a) rated output of greater than 1 440 W measured at 12 V;
   (b) rated output of greater than 1 320 W measured at 24 V OR 32 V

GENERATORS OR ALTERNATORS, being ANY of the following:
   (a) brushless;
   (b) fitted with a vacuum pump;
   (c) totally sealed, fully waterproof, without fan and fully
       enclosed

ALTERNATORS

SWITCHBOXES, marine, capacitor discharge ignition, electronic
 in-built sequential multiple triggering type with sensing circuits

ALTERNATORS, incorporating a permanent magnet rotor assembly,
 having BOTH of the following:
   (a) a single phase output winding NOT exceeding 25 A;
   (b) a separate AC winding to supply self energising ignition
       systems of the capacitor discharge type

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8636084 it is the importer"s
   responsibility to establish that the parts were
   manufactured 30 years or more prior to the date of
   importation

GLOW PLUGS

PARTS, magneto, ignition, automotive engine, but NOT including
 distributor parts or coil parts

PARTS FOR VEHICLES which, if imported, would fall within
 Chapter 87 of the Customs Tariff Act 1987, being parts
 which are 30 years old or more
   For the purposes of TC 8636083 it is the importer"s
   responsibility to establish that the parts were
   manufactured 30 years or more prior to the date of
   importation

PARTS, STARTER MOTOR, 6 V, 12 V or 24 V, having a
 pole housing OD of 110 mm or greater, being ANY of the
 following:
   (a) armatures having a lamination dia exceeding 66 mm;
   (b) brush holders having a holder internal cross-section
       exceeding 120 sq mm;
   (c) drive end housings having a field housing spigot dia
       exceeding 95 mm;
   (d) commutator end covers having a field housing spigot dia
       exceeding 100 mm;
   (e) shift levers having a solenoid to arm reach exceeding 80 mm;
   (f) field housings having a spigot dia exceeding 100 mm;
   (g) field coils and housings having a spigot dia
       exceeding 100 mm

MAGNETO COILS, AC, AUTOMOTIVE

PARTS, GENERATOR OR ALTERNATOR, having a housing diameter NOT less
 than 127 mm, OR more than 12 rotor poles, being ANY of the
 following:
   (a) retainers, bearing;
   (b) key ways;
   (c) regulators;
   (d) stators;
   (e) brush boxes;
   (f) rotors;
   (g) rotor coils;
   (h) rotor hubs;
   (i) collars;
   (j) slip rings;
   (k) main alternator repair kits comprising ANY of the following:
          (i) slip rings;
         (ii) ball bearings;
        (iii) insulating fittings;
         (iv) brush boxes;
          (v) gaskets;
         (vi) rubber seals;
        (vii) carbon brushes;
       (viii) through bolts;
         (ix) nuts;
          (x) washers;
   (l) brush plates;
   (m) diode plates;
   (n) gasket covers;
   (o) brush covers;
   (p) baffle covers;
   (q) housings

PARTS, chain saw ignition

PARTS, ALTERNATOR, being repair kits, including ALL of the 
following:
  (a) bearing;
  (b) brackets;
  (c) brushes;
  (d) grease fitting;
  (e) holders;
  (f) washers

PARTS, ALTERNATOR, being repair kits, including ALL of the 
following:
  (a) bearing;
  (b) brackets;
  (c) brushes;
  (d) holders;
  (e) washers

PARTS, ALTERNATOR, being repair kits, including ALL of the 
following:
  (a) bearing;
  (b) bolts;
  (c) brackets;
  (d) brushes;
  (e) connectors;
  (f) grease fitting;
  (g) holders;
  (h) washers

PARTS, ALTERNATOR, being repair kits, including ALL of the 
following:
  (a) bearing;
  (b) bolts;
  (c) brackets;
  (d) brushes;
  (e) grease fitting;
  (f) holders;
  (g) washers

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more or exact replicas of those parts

LAMP INSERTS, headlamp, driving OR fog, consisting of lens,
 reflector and bulb holder

LAMPS, brake warning, in which the light flashes at a rate
 proportional to brake application pressure

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being lamps and lights

WORK LIGHTS, tungsten halogen, having asymetrical beam pattern, but
 NOT including head lamps, flood lamps or other lampware of the
 passenger motor vehicle type

LAMPS, light emitting diode type, sealed, NOT being of a kind for
 use on passenger motor vehicles

LAMP INSERTS, headlamp, driving or fog, comprising lens,
 reflector and bulb holder

LAMP ASSEMBLIES, PASSENGER MOTOR VEHICLE, having ALL of the 
following:
  (a) reflectors OR projector;
  (b) lamp holders;
  (c) lens

LIGHTS, DOOR, PASSENGER MOTOR VEHICLE, light emitting diode 
type, having BOTH of the following:
  (a) vehicle door mount;
  (b) logo projector

LAMPS, LED, 12 V, non-ceramic, having BOTH of the following:
  (a) indicator OR turn signals;
  (b) daytime running lamp AND position lamp

WORK LAMPS, HALOGEN, non ceramic

WORKLAMPS, HIGH INTENSITY DISCHARGE

LIGHTING OR SIGNALLING EQUIPMENT, WARNING OR EMERGENCY OR 
INDUSTRIAL, being EITHER of the following:
  (a) vehicle top flashing beacons;
  (b) vehicle mounted telescopic tower lights

LAMPS, TRAILER, 12 VOLT OR 24 VOLT

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more or exact replicas of those parts

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being horns and sound signalling devices

ALARMS, REVERSING, audible warning, externally mounted

ALARMS, REVERSING, AUDIBLE PUBLIC WARNING, external mounting, 
NOT less than 24 V

DETECTORS, driver safety warning

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) windscreen wipers;
  (b) defrosters;
  (c) demisters

LAMP HOUSINGS, incorporating a drive motor, being parts for
 revolving beacons

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being ANY of the following:
  (a) lamp lenses;
  (b) lamp bezels;
  (c) lamp rims;
  (d) lamp backing plates;
  (e) headlamp and driving lamp reflector rings and/or cones;
  (f) horn operating mechanism;
  (g) windscreen defroster shroud and cowl;
  (h) wiper arms

PARTS, WINDSCREEN WIPER, being ANY of the following:
  (a) wiper blade assemblies, comprising BOTH of the following:
        (i) rubber wiper blade refills;
       (ii) wiper blade frames,
  (b) wiper arms;
  (c) plastic or metal backed rubber wiper blade refills

PARTS, PASSENGER MOTOR VEHICLE, REVERSE PARKING AID, being 
electronic control units

PARTS, WINDSCREEN WIPER, TRUCK AND/OR BUS, being ANY of the 
following:
  (a) wiper blade assemblies, comprising BOTH of the following:
         (i) rubber wiper blade refills;
        (ii) wiper blade frames,
  (b) wiper arms;
  (c) plastic AND/OR metal backed rubber wiper blade refills;
  (d) wiper linkages;
  (e) wiper frame

PARTS, WINDSCREEN WIPER, OFF HIGHWAY TRUCK OR MINING TRUCK, 
being ANY of the following:
  (a) plastic AND/OR metal backed wiper blades;
  (b) wiper blades AND frames;
  (c) wiper arms with OR without wiper blades AND frames;
  (d) wiper linkages

LAMPS, miners"

TORCHES, hand held, battery operated, but NOT including underwater
 OR scuba divers torches

LOCATION BEACONS, LIFE JACKET OR LIFE RAFT

FLASHLIGHTS, pocket, powered by primary batteries, conforming to
 Australian Defence Standard DPD 6230-2001A

LIGHTS, marine liferaft , battery operated, imported with or without
 battery, capable of internal or external attachment to marine
 liferafts and complying with the 1983 amendments to the
 International Convention for the Safety of Life at Sea 1974

POCKET TORCH, hand held, battery operated, having ALL of the
 following features:
   (a) intrinsically safe to Australian Standard Ex ia;
   (b) submersible to 180 m;
   (c) integrated lamp/reflector module;
   (d) moulded from polycarbonate resin;
   (e) operated from 2 x AAA batteries and supplied with or without
       its first set of batteries

TORCHES AND/OR LAMPS AND/OR LANTERNS, portable, with OR without 
ANY of the following:
  (a) antiglare film;
  (b) batteries;
  (c) bulbs;
  (d) carry strap;
  (e) head bands;
  (f) hooks;
  (g) set plate;
  (h) tripod;
  (i) vise

TORCHES AND/OR LAMPS AND/OR LANTERNS, portable, battery powered, 
with OR without batteries

TORCH SETS, including BOTH of the following:
  (a) headband held lamp;
  (b) handheld torch AND/OR handheld flashlight

TORCHES, DIVING, handheld

LIGHTS, LED, battery powered, being slip-on finger lights

LIGHTS, battery powered, being EITHER of the following:
  (a) armband;
  (b) clip on

LIGHTS, LED, 6V battery powered, having BOTH of the following:
  (a) computer chip controlled flash;
  (b) on/off light sensor

TORCHES, light emitting diode, including key ring

LIGHTS, LED, portable, battery powered, solar rechargeable

LIGHTS, foldable, clip on, battery powered

LIGHTS, push on push off, mountable, battery operated, non 
ceramic

LANTERNS, battery powered, having BOTH of the following:
  (a) light emitting diodes;
  (b) carry handle

LAMPS, READING, portable, battery powered, comprising ALL of the 
following:
  (a) flexible shafts;
  (b) LED bulbs;
  (c) book clamps

TORCHES, DYNAMO, self powering, portable

LIGHTS, TENT, battery powered, having ALL of the following:
 (a) light emitting diodes;
 (b) magnets;
 (c) mounting plates

LANTERNS, battery powered, comprising BOTH of the following:
 (a) fluorescent tubes;
 (b) carry handles

HEADLAMPS

OHMIC HEATERS, programmable logic controlled, including ALL of 
the following:
  (a) pump infeed;
  (b) 24 ohmic tubes;
  (c) maximum pressure NOT greater than 40 bar;
  (d) flow rate NOT greater than 1 200 kgs/hour;
  (e) outlet temperature NOT less than 158 degrees C

FURNACES, VACUUM CARBURISING, comprising BOTH of the following:
  (a) convection heaters;
  (b) gas quenchers

GLASS TEMPERING FURNACES, horizontal

OVENS, CONTINUOUS, BELT

GLASS TEMPERING FURNACE, horizontal, having BOTH of the 
following:  
  (a) loading conveyor;                                  
  (b) unloading conveyor

THERMOBONDING OVENS, double belt, with OR without drives AND/OR 
controllers, including BOTH of the following:
  (a) heating section;
  (b) blowers

REACTORS, electric, including ALL of the following:
  (a) inclined packed bed;
  (b) operating temperature NOT less than 900 degrees Celsius;
  (c) NOT less than 80 resistance-heating elements

THERMOBONDING OVENS, double belt, with OR without drives AND/OR 
controllers, including BOTH of the following:
  (a) heating AND cooling sections;
  (b) blowers

GLASS TEMPERING FURNACES, horizontal

DENTAL SINTERING FURNACES, METAL, having a maximum temperature 
capacity NOT less than 1 550 degrees Celsius

DENTAL FURNACES, FIRING OR PRESS AND FIRING OR SINTERING, having 
a maximum temperature capacity NOT less than 1 200 degrees 
Celsius, with OR without ANY of the following:
  (a) infrared thermal camera;
  (b) wireless connectivity;
  (c) sd card reader;
  (d) usb port;
  (e) ethernet port

OVENS, LAMINATING GLASS, having BOTH of the following:
  (a) lifting elevator;
  (b) buffer racks

OVENS, METAL SOLDERING, vacuum operated, including ALL of the 
following:
  (a) electrical resistance heater;
  (b) anti-oxidising nitrogen gas connector;
  (c) formic acid bubbler;
  (d) pneumatic actuators

FURNACES, VACUUM CARBURISING, comprising BOTH of the following:
  (a) convection heaters;
  (b) gas quenchers

OVENS, CONTINUOUS, BELT

GLASS TEMPERING FURNACE, horizontal, having BOTH of the 
following:  
  (a) loading conveyor;                                  
  (b) unloading conveyor

VACUUM ALUMINUM BRAZING FURNACES, programmable logic controlled, 
having ALL of the following:
  (a) manual forklift loader;
  (b) loading tray;
  (c) combined heating power NOT less than 180 kW;
  (d) dual wall furnace vessel with stainless steel heating 
      chamber

INDUCTION FURNACE GRAINING LINE, programmable logic controlled, 
whether OR not assembled, including ALL of the following:
  (a) induction heating power output NOT less than 200 kW and 
      NOT greater than 400 kW;
  (b) crucible;
  (c) multi-hole die;
  (d) tank;
  (e) grains collecting basket; 
  (f) grains output NOT less than 250 kg per one hour; 
  (g) insulating lid;
  (h) gas regulation unit; 
  (i) control panel

INDUCTION TUNNEL FURNACE CASTING LINE, 160 kW, programmable 
logic controlled, including ALL of the following:
  (a) melting station including pinch valve;
  (b) solidification station;
  (c) cooling station including pinch valve;
  (d) medium frequency generator;
  (e) HMI touch screen;
  (f) conveyor belts AND/OR conveyor chain

AMMUNITION DISPOSAL UNITS, mobile, including ALL of the 
following:
  (a) deactivation furnace, including ALL of the following:
          (i) electrical heating;
         (ii) static detonation chamber;
        (iii) conveyor;
         (iv) generator,
  (b) off gas filter system, including ALL of the following:
          (i) hot gas filter;
         (ii) cooling unit;
        (iii) fan;
         (iv) stack;
          (v) tanks;
         (vi) pumps,
  (c) operator controls

SINTERING AND GLAZING FURNACES, DENTAL, including ALL of the 
following:
  (a) chamber capacity being EITHER of the following:
          (i) NOT greater than 3 single crowns;
         (ii) one 3-unit bridge,
  (b) touch-display; 
  (c) maximum sintering temperature NOT greater than 
      1 600 degrees Celsius; 
  (d) heat-up speed NOT greater than 300 degrees Celsius per
      minute;
  (e) interfaces being ANY of the following:
          (i) 2x USB 2.0;
         (ii) 1x LAN; 
        (iii) WLAN

INDUCTION FURNACE SYSTEM, PRECIOUS METAL PROCESSING, water 
cooled, programmable logic controlled, whether OR not assembled, 
including ALL of the following: 
  (a) NOT less than two production channels OR tunnels;
  (b) loading zone, including BOTH of the following:
          (i) table;
         (ii) motorised mould pusher,
  (c) entrance chamber, including BOTH of the following:
          (i) bulkheads;
         (ii) nozzles,
  (d) power generator having an operating heating capacity  
      NOT less than 101 kW;
  (e) heating body OR chamber, including BOTH of the following:
          (i) inductors;
         (ii) working temperature NOT greater than 1 251 
              degrees Celsius, 
  (f) solidification zone, including BOTH of the following:
          (i) insulated chamber;
         (ii) thermostat,
  (g) cooling zone, including ALL of the following:
          (i) chamber;
         (ii) thermostat;
        (iii) nozzles,
  (h) unloading zone, including BOTH of the following:
          (i) steel table;
         (ii) sensors AND/OR alarms;
  (i) conveyors;
  (j) gas passages AND/OR pipelines;
  (k) operating output NOT less than 12 ingots per hour

VACUUM INDUCTION FURNACE SYSTEM, MELTING AND/OR CASTING, water 
cooled, programmable logic controlled, whether OR not assembled, 
including ALL of the following:
  (a) furnace vacuum chamber;
  (b) induction mold heater;
  (c) vessel tilter;
  (d) water cooled optical port window;
  (e) retractable pivoting heat shutter;
  (f) vacuum air pump;
  (g) control AND power supply cabinets

OVENS, MICROWAVE

FURNACES, VACUUM, dental porcelain

VACUUM ARC REMELTING FURNANCE, including ALL of the following:
  (a) melt chamber;
  (b) skull crucible support chamber door;
  (c) skull crucible;
  (d) tundish system;
  (e) mould side chamber door;
  (f) electrode tower;
  (g) vacuum pumping system;
  (h) pneumatic system;
  (i) internal cooling water system;
  (j) closed loop cooling system;
  (k) centrifugal casting system;
  (l) argon inlet control system;
  (m) magnetic stirring coil;
  (n) electrical control cabinet;
  (o) central control desk;
  (p) software;
  (q) operating pendant;
  (r) terminal boxes;
  (s) high current feeding system;
  (t) colour television system;
  (u) melt power system;
  (v) copper bus bar connections

FURNACES, VACUUM, comprising ALL of the following:
   (a) graphite heating elements;
   (b) PLC controlled;
   (c) graphite work box

OVENS, LABORATORY, infra red AND/OR near infra red, programmable
 logic controlled

FURNACES, VACUUM, programmable logic controlled, having ALL of 
the following:
  (a) molybdenum AND stainless steel radiation shields;
  (b) heating elements;
  (c) closed loop gas cooling system; 
  (d) control system

INDUCTION COOKING MODULES, sealed, including ALL of the 
following:
  (a) generator;
  (b) induction coil;
  (c) casing AND/ OR framework

MOBILE COOKING STATIONS, including induction modules, with OR 
without ANY of the following:
  (a) electric modules;     
  (b) baskets;
  (c) hanging frames;
  (d) splash guards;
  (e) cleaning scrapers;
  (f) woks

DRYING MACHINES, BISCUIT, radio frequency, including ALL of the 
following:
  (a) width NOT greater than 2 400 mm;
  (b) length NOT greater than 9 200 mm;
  (c) radio frequency NOT greater than 50 MHz;
  (d) programmable logic controller;
with OR without ANY of the following:
          (i) conveyor;
         (ii) cooling system

MICROWAVE PASTEURISATION TUNNELS, programmable logic controlled, 
power output NOT greater than 108 kW, with OR without EITHER of 
the following:
  (a) infeed AND outfeed conveyors;
  (b) water chiller

DEFROSTING MACHINES, radio frequency, continuous inline, 
programmable logic controlled, including ALL of the following:
  (a) control panel;
  (b) radio frequency NOT greater than 27.12 MHz;
  (c) rigid OR solid conveyor belts

MICROWAVE GENERATORS, water cooled, power output NOT less than 5 
kW and NOT greater than 100 kW

RADIO FREQUENCY DRYING MACHINES, frequency exceeding 20 Hz

COOKING SUITES, multifunction, having ALL of the following:
  (a) bain-marie;
  (b) double griller;
  (c) electric hot plate;
  (d) electric pasta cooker;
  (e) flat fry-top;
  (f) deep fat fryer;
  (g) gas range having NOT less than 2 burners;
  (h) induction generator;
  (i) glass ceramic induction cook plates;
  (j) induction AND electric cook plates;
  (k) infra-red heating elements;
  (l) oil recovery containers;
  (m) pot rack;
  (n) refrigerated draws;
  (o) rotating stand;
  (p) shelves;
  (q) sink;
  (r) storage drawers;
  (s) electric oven;
  (t) water circulation unit

INDUCTION HEATERS, being ONE or BOTH of the following:
  (a) metal bearing induction heaters having bearing weight  
      capacity NOT greater than 1 200 kg;
  (b) solid metal non-bearing induction heaters having a 
      workpiece weight capacity NOT greater than 600 kg

INDUCTION HEATERS, TUBE AND/OR PIPE, AC powered, having ALL of 
the following:
  (a) frequency converter, having BOTH of the following:
       (i) frequency range NOT less than 5 kHz and NOT greater 
           than 20 kHz;
      (ii) efficiency NOT less than 93%,
  (b) heating station;
  (c) induction coils;
  (d) water cooling unit;
  (e) input power NOT greater than 1 000 kVA;
  (f) displacement power factor NOT less than 95%

INDUCTION HEATERS, AC powered, having ALL of the following:
  (a) generator having a frequency range NOT less than 5 kHz 
      and NOT greater than 20 kHz;
  (b) input power NOT greater than 900 kVA;
  (c) output current NOT greater than 1 500 A;
  (d) insulation;
  (e) cooling system;
  (f) induction wire

PIPE HEATING MACHINES, PIPELINE SECTION CONSTRUCTION, with OR 
without diesel generators, having BOTH of the following:
  (a) induction clamps OR rings OR coils;
  (b) weight NOT greater than 1 700 kg

COOKTOPS, INDUCTION, having an electrical input rating NOT less 
than 3 500 watts

PARTS, ELECTRIC ARC FURNACE, DIRECT REDUCED IRON SMELTING, being 
ANY of the following:
  (a) cooling elements;
  (b) steel shell components;
  (c) combustion chambers;
  (d) charging tubes;
  (e) feed bins

PARTS, METAL COATING LINE, being radiant heating tubes

PARTS, THERMAL ENERGY STORAGE FURNACE, being base modules having 
ALL of the following:
  (a) steel outer shells;
  (b) steel anchor frames with ceramic anchors;
  (c) multilayer insulation

TUBES, extruded, radiant and protection

PARTS, TILTING ELECTRIC ARC FURNACE, being a spray cooled roof 
and elbow module

PARTS, FURNACE, ELECTRIC ARC, TILTING, being ANY of the 
following:
 (a) lower shells;
 (b) heat shields;
 (c) balconies;
 (d) cooling blocks;
 (e) piping;
 (f) shell cages;
 (g) cooling panels;
 (h) balcony panels;
 (i) slag door cooling tunnels and/or arch tanks;
 (j) slag doors;
 (k) slag door hydraulic cylinders;
 (l) cable ducts;
 (m) lifting jigs and/or tackle

PARTS FOR SUBMERGED ARC FURNACES, being EITHER of the following:
    (a) copper electrode holder contact clamps; or
    (b) copper pressure rings

PARTS, FURNACE, ELECTRIC ARC, TILTING, being ANY of the
following:                                             
  (a) current conducting aluminium arms;               
  (b) roller boxes;                                    
  (c) contact pads;                                    
  (d) clamp clips;                                     
  (e) clamps;                                          
  (f) spray coolers;                                   
  (g) cup spring masts;                                
  (h) main insulation plates;                          
  (i) insulating sleeves;                              
  (j) contact pad o-ring strings;                      
  (k) contact pad rings;                               
  (l) pressure pads;
  (l) pressure pads;                    
  (m) pressure pad insulating plates;   
  (n) pressure pad insulating sleeves;  
  (o) clamp clip slide plates;          
  (p) slide plate insulating sleeves;   
  (q) clamp clip flexible metallic hoses

REWORK STATIONS, HOT AIR OR GAS, having ALL of the following:
   (a) solder and desolder functions;
   (b) maximum part height front surface 25 mm;
   (c) maximum part height rear surface 45 mm;
   (d) X-Y movement distance: X = 275 mm, Y = 210 mm;
   (e) dual sight vision

SOLDERING AND/OR REWORK STATIONS, having ALL of the following:
  (a) control unit; 
  (b) ergonomic instruments;
  (c) intelligent heat management module;
  (d) soldering OR de-soldering cartridge tips;
  (e) hand piece stands

SOLDERING AND/OR REWORK STATIONS, having ALL of the following:
  (a) hot air station;
  (b) control unit;
  (c) feed station;
  (d) heat management module;
  (e) soldering AND rework cartridge tips;
  (f) pre-heaters module with elements;
  (g) hand piece stands;
  (h) nitrogen generator;
  (i) instruments

SOLDERING AND/OR REWORK STATIONS, having ALL of the following:   
  (a) control unit;
  (b) feed station; 
  (c) ergonomic instruments; 
  (d) intelligent heat management module;
  (e) soldering and rework cartridge tips;
  (f) hand piece stands;

SOLDERING LINE, EXPLOSIVE AND/OR DETONATOR PRODUCTION, 
programmable logic controlled, including ALL of the following:
  (a) ingredient transfer cell, including BOTH of the following:
         (i) material lifting AND/OR handling robot;
        (ii) explosive screened enclosure,
  (b) soldering cell, including BOTH of the following:
         (i) soldering stations;
        (ii) explosive screened enclosure,
  (c) product placement cell, including BOTH of the following:
         (i) robot;
        (ii) explosive screened enclosure,
  (d) conveyors;
  (e) power AND pneumatic distribution cabinets

WELDING MACHINES, resistance type using intermediate wire
 electrodes

WELDING MACHINES, stud to metal hollow ware

WELDERS, SPOT

WELDING MACHINES, electric arc, wire feed, metal inert gas (MIG) OR
 metal active gas (MAG), weight NOT exceeding 30 kg

WELDING TORCHES AND/OR GUNS, being ANY of the following:
  (a) gas metal arc;
  (b) flux cored;
  (c) submerged arc;
  (d) tungsten inert gas;
  (e) gouging;
  (f) manual metal arc

WELDERS, PLASMA

WELDERS, TUNGSTEN INERT GAS (TIG)

WELDERS, being ANY of the following:
  (a) multi process;
  (b) tungsten inert gas (tig);
  (c) manual metal arc (mma);
  (d) plasma

WELDERS, being ANY of the following:
  (a) gas metal arc (GMAW);
  (b) flux cored (FCAW);
  (c) submerged arc (SAW)

WELDING TORCHES, plasma arc

TORCH OR GUNS UNITS, WELDING AND/OR CUTTING AND/OR GOUGING, 
having coaxial conduits, with OR without ANY of the following:
  (a) fume extractors;
  (b) control cables;
  (c) digital displays; 
  (d) control switches OR buttons;
  (e) wire feeder;
  (f) hose spatter protectors;
  (g) connectors;
  (h) pistol grips;
  (i) capillary tubes;
  (j) guides;
  (k) liners;
  (l) valves

WELDING TORCHES AND/OR GUNS, being ANY of the following: 
  (a) flux cored;
  (b) submerged arc;
  (c) gas metal arc;
  (d) tungsten inert gas (tig);
  (e) carbon arc gouging;
  (f) manual metal arc

WELDERS, being EITHER of the following:
  (a) tungsten inert gas (TIG);
  (b) manual metal arc (MMAW)

RECOVERY UNITS, welding flux

WELDING MACHINES, ultrasonic

WELDING MACHINES, vertical, moulded plastic component welding

PISTOLS, hot air, plastic welding

IRONS, hot melt, carpet seaming

SPLICERS, fusion, optical fibre

BUTT WELDING MACHINES, capable of welding thermoplastic
 sheets having a thickness NOT exceeding 30 mm

VULCANISER PRESSES, BELT

ELECTRO FUSION WELDING MACHINES, HDPE PIPE AND FITTINGS

WELDING MACHINES, hot air, plastic welding

HEAT SEALERS, plastic bag, hand operated, AC/DC availability

HEAT SEALERS, plastic bags or sheets, hand operated, battery powered

PORTABLE TOILETS, waterless, thermal welding AND sealing, with 
OR without ANY of the following:
          (i) floor mount sockets;
         (ii) rechargeable battery;
        (iii) barrier foil

SLEEVING MACHINES, CORRUGATED DRAINAGE PIPE, including ALL of 
the following:
  (a) entry haul-off unit;
  (b) exit haul-off unit;
  (c) welding unit;
  (d) coil change unit;
  (e) pipe covering diameter NOT less than 50 mm and NOT greater 
than 200 mm

HOT AIR WELDING MACHINES, PLASTIC, including ALL of the 
following:
  (a) feeder;
  (b) cutter;
  (c) vertical AND horizontal welding heads

THERMOPLASTIC WELDING MACHINES, including ALL of the following:
  (a) generator;
  (b) transformers;
  (c) rectifier;
  (d) fan;
  (d) control panel

WELDING MACHINES, THERMAL PLASTIC, MEDICAL, high frequency, 
including ALL of the following:
  (a) assembly station;
  (b) bag forming press;
  (c) radio frequency (RF) thermal welding;
  (d) indexing module;
  (e) control panel

PLASTIC HEAT WELDING AND FOLDING MACHINES, programmable logic 
controlled

HEAT SEALERS, BAG AND/OR TUBING, PLASTIC AND/OR PAPER AND/OR 
FOIL, being ANY of the following:
  (a) benchtop;
  (b) handheld;
  (c) pedestal mounted;
  (d) floor mounted;
  (e) wall mounted;
  (f) hand OR foot pedal operation;
  (g) plier action

SPRAYERS, THERMAL, programmable logic controlled, including ALL 
of the following:
  (a) controllers;
  (b) electrical AND gas AND/OR fuel modules;
  (c) jam boxes;
  (d) guns AND/OR torches;
  (e) feeders;
  (f) heat exchangers

WELDERS, HAND, THERMOPLASTIC

WELDERS, EXTRUSION, PLASTIC, comprising ALL of the following:
  (a) dual channel temperature control;
  (b) electronically controlled drive motor;
  (c) preheater

WELDERS, PLASTIC, butt fusion

REPAIRED, PARTS, RAILWAY WELDING MACHINE, centring device
For the purposes of this Order, these goods had been sent out of 
Australia for repair prior to importation

PARTS, SOLDERING AND DESOLDERING STATIONS, being ANY of the 
following:
  (a) cartridge AND/OR tips; 
  (b) handles;
  (c) nozzles; 
  (d) pre-heater

PARTS, RAIL FLASH-BUTT WELDING MACHINE, being ANY one OR more of 
the following:
  (a) blades AND/OR knives;
  (b) jaws;
  (c) shafts;
  (d) lifting hooks AND/OR lifting assembly;
  (e) housings AND/OR covers;
  (f) doors;
  (g) guards;
  (h) tie rods;
  (i) flanges;
  (j) supports;
  (k) handles;
  (l) shims;
  (m) bushings;
  (n) levers;
  (o) stoppers

WIRE FEEDERS, ELECTRIC WELDERS

PARTS, GUNS AND/OR TORCHES, welding OR cutting OR gouging, being 
ANY of the following:
  (a) arms;
  (b) back caps;
  (c) bodies, with OR without screws;
  (d) collet bodies, with OR without gas lenses;
  (e) conduits or liners with OR without fittings;
  (f) conductors;
  (g) connectors;
  (h) contact tips;
  (i) gas diffuser AND insulator;
  (j) gas distributors;
  (k) gas guide inserts;
  (l) gas lenses;
  (m) guide tubes, with OR without fittings;
  (n) handles, with OR without screws;
  (o) heads or head units;
  (p) insulators, with insulating boots;
  (q) levers, with OR without screws;
  (r) start cartridge;
  (s) swirl rings;
  (t) torch heads, with OR without valves;
  (u) torch necks;
  (v) torch holders;
  (w) wire feeders;
  (x) wire supports

PARTS, CAN WELDING MACHINE, being ANY of the following:
  (a) weld monitor; 
  (b) wire drive conversion;
  (c) main drive conversion;
  (d) wire chopper drive conversion;
  (e) wire profiler drive conversion;
  (f) tool set diameter NOT greater than 73 mm, having ALL of
      the following:
          (i) calibration tool;
         (ii) guide;
        (iii) catch shell tool, 
  (g) weld arm diameter NOT greater than 65 mm, having ALL of
      the following: 
          (i) welding arm;
         (ii) head piece;
        (iii) welding roller head with monitor trap,
  (h) control switchboard including welding current generator

PARTS, ELECTRIC WELDING MACHINE, being ANY of the 
following:
  (a) torch bodies, with OR without valves; 
  (b) collet wedges;
  (c) collets;
  (d) torch wire contacts;
  (e) diffusers;
  (f) electrode holders;
  (g) tungsten electrodes;
  (h) gas distribution screens;
  (i) guns;
  (j) torch heads;
  (k) panels;
  (l) nozzles;
  (m) wire strain reliefs;
  (n) tip holders;
  (o) tips;
  (p) torches, with OR without valves;
  (q) wire feeder rolls, whether OR not mounted

PARTS, WELDING SYSTEMS, TUBE AND PIPE, GAS TUNGSTEN ARC, ORBITAL,
 being ANY of the following:
   (a) power supply;
   (b) welding heads;
   (c) fixture blocks;
   (d) collets;
   (e) side plates;
   (f) adapter inserts;
   (g) remote pendant;
   (h) weld head extension cable

PARTS, WELDING GUNS OR TORCHES, PLASMA ARC, GAS METAL ARC, FLUX
 CORED ARC, SUBMERGED ARC, TUNGSTEN INERT GAS OR GOUGING, being ANY
 of the following:
   (a)  baffles;
   (b)  bushings;
   (c)  contact devices;
   (d)  contact jaws;
   (e)  contact tips;
   (f)  cooling flange sleeves;
   (g)  cups;
   (h)  cutting electrodes;
   (i)  electrodes;
   (j)  flux nozzles;
   (k)  gouging heat shields;
   (l)  gun housings;
   (m)  protective caps;
   (n)  sealing sleeves;
   (o)  spatter protectors;
   (p)  insulating rings;
   (q)  swirl baffles;
   (r)  tips;
   (s)  torch contacts;
   (t)  triggers;
   (u)  wear inserts

PARTS, TORCH, MIG OR TIG, being ANY of the following:
    (a) adaptor flange;
    (b) coaxial conduit;
    (c) conduit sleeve;
    (d) conduit support;
    (e) contact tip;
    (f) cooling fins;
    (g) drive;
    (h) drive assembly arm;
    (i) drive assembly cap;
    (j) drive assembly knob;
    (k) drive assembly rolls;
    (l) fume shroud;
    (m) diffuser;
    (n) trigger;
    (o) wire shear;
    (p) ceramic nozzle;
    (q) collet;
    (r) collet chuck;
    (s) trigger

PARTS, ELECTRO FUSION WELDING MACHINE, HDPE PIPE AND FITTINGS,
 being ANY of the following:
   (a) mounted printed circuit boards;
   (b) casing;
   (c) controls

ROLLS, wire feed, metal inert gas wire feeder

PARTS, ARC WELDING MACHINE, being kits consisting of ALL of the 
following:
  (a) welding work clamp assembly;
  (b) welding electrode holder assembly;
  (c) insulated welding leads with OR without connectors

PARTS, ELECTRIC RESISTANCE SEAM WELDER, being welding heads

WELDING GUNS OR TORCHES, being ANY of the following:
   (a) gas metal arc;
   (b) flux cored;
   (c) submerged arc;
   (d) tungsten inert gas;
   (e) carbon arc gouging;
   (f) manual metal arc welding

WIRE FEEDERS, METAL INERT GAS (MIG) WELDERS

PARTS, ARC WELDING MACHINE, being welding leads with electrode 
holders OR earth clamps

PARTS, ARC WELDING MACHINE, being twist lock electrode holders

PARTS, WELDER, CENTERING, being a ball screw assembly 
consisting of ALL of the following:
  (a) threaded spindles;
  (b) ball nut cases;
  (c) double nuts;
  (d) clamping nuts;
  (e) wipers;
  (f) retaining rings

PARTS, WELDER, metal inert gas torches

ELECTRODE HOLDERS, TONG

HEATERS, WATER, three phase, having an input NOT less than 27 A 
per phase and NOT greater than 40 A per phase

HEATERS, IMMERSION, electric

WASH BASINS, hot water, portable

HEATERS, STORAGE, HOT WATER, complying with AS 4552-2000 (AG 102-
 2000), comprising ALL of the following:
   (a) internally fitted, externally flued;
   (b) electric AND/OR LPG synchronous and single function operation;
   (c) stainless steel storage tank NOT greater than 14 litres;
   (d) pressure reducing valve, maximum working pressure NOT greater
       than 400 kPa

HEATERS, COLUMN, diathermic oil filled

HEATERS, portable, having ALL of the following:
   (a) oil filled;
   (b) built in thermostat;
   (c) castors;
   (d) weight NOT exceeding 20 kg

HEATERS, COLUMN, OIL FILLED, having ALL of the following:
   (a) 3 heat settings;
   (b) automatic safety cutout;
   (c) cool touch end panels;
   (d) wattage operations of 1 000 W, 1 500 W, 1 200 W, 2 000 W
       OR 2 400 W

HEATING PANELS, MODULAR, comprising elements of metal foil strips
 sandwiched between two layers of plastic laminate

HEATERS, AIRCRAFT, electric powered, portable, including BOTH of 
the following:
  (a) towable speed NOT greater than 32 km/h;
  (b) weight NOT greater than 735 kg

HEATERS, indoor OR outdoor, ceiling OR wall-fixed, having BOTH 
of the following:
  (a) power NOT less than 2,000 W and NOT exceeding 6,000 W;
  (b) operational voltage NOT exceeding 240 V

HEATERS, WATER AND AIR SPACE, vehicle mountable, having BOTH of 
the following:
  (a) air space heating power capacity NOT greater than 8 kW;
  (b) water heating temperature capacity NOT greater than 
      70 degrees Celsius

SAUNAS, wood construction, steam heated

HEATERS, PASSENGER TRAIN

PANELS, HEATING, SILICATED AND ETCHED, ceiling mounted, having 
an output of NOT less than 350 W and NOT greater than 3 600 W

HEATERS, FAN, domestic, floor standing, portable, power consumption
 NOT greater than 2 000 W

HEATERS, DOMESTIC, power consumption NOT greater than 2 500 watts

HAIR DRYERS, whether or not imported with attachments, being
 either of the following types:
   (a) wall mounted, articulated arm type;
   (b) stand mounted

HAIR DRYERS, whether or NOT imported with diffuser and styling
 brush

HAND DRYERS, electro-thermic, including BOTH of the following:
  (a) fan;
  (b) heater,
with OR without ANY of the following:
       (i) motion sensor controller;
      (ii) button controller;
     (iii) paper towel dispenser AND/OR receptacle;
      (iv) wall mountings

IRONS, DOMESTIC, ELECTRIC

COOKTOPS, induction

BREAD MAKING APPLIANCES, domestic

COOKTOPS, gas AND induction, glass ceramic

OVENS, DRY HEAT AND/OR STEAM, electric powered, with OR without a
microwave oven

COOKERS, HEATED AIR FRYING AND ROASTING AND GRILLING, including 
ALL of the following:
  (a) condensation tray;
  (b) timing AND heating controls; 
  (c) heater AND fan,
with OR without ANY of the following:
        (i) removable inner bowl; 
       (ii) roasting rack;
      (iii) detachable bowl handle;
       (iv) measuring spoon

OVENS, DRY HEAT, electric powered, having a volume capacity 
NOT less than 40 L and NOT greater than 69 L

OVENS, STEAM AND MICROWAVE AND/OR DRY HEAT, electric powered, 
having ALL of the following:
  (a) volume capacity NOT less than 30 L and NOT greater 
      than 69 L;
  (b) heat sensor;
  (c) steam controller;
  (d) convectional fan

OVENS, BENCH TOP, electric, with OR without convection fans, 
having ALL of the following:
  (a) capacity NOT greater than 25 litres;
  (b) timer;
  (c) temperature setting NOT greater than 240 degrees Celsius;
  (d) element wattage NOT greater than 1 800 W

COOKERS, BENCH TOP, electric, having ALL of the following: 
  (a) length NOT greater than 570 mm;
  (b) depth NOT greater than 455 mm;
  (c) height NOT greater than 335 mm;
  (d) two hot plates;
  (e) 30 litre convection oven with grill;
  (f) double glazed door;
  (g) 3 shelf positions

COOKERS, hot air, electric, including ALL of the following:
  (a) temperature control dial;
  (b) removable basket;
  (c) air outlet cover;
  (d) combined timer AND power dial

COOKERS, hot air convection, electric, including ALL of the 
following:
  (a) timer, incorporating an alarm;
  (b) removable non-stick bowl;
  (c) lid;
  (d) stirring paddle;
  (e) fan AND filter

COOKERS, BENCH TOP, convection, electric, having BOTH of the 
following:
  (a) removable tempered glass bowl;
  (b) bowl capacity NOT less than 10 litres

COOKERS, BENCH TOP, convection, electric, including ALL of the 
following:
  (a) frying basket;
  (b) temperature control;
  (c) timer

COOKTOPS

COOKERS, PASTA

CREPE MAKERS

ROTISSERIE GRILLS, domestic, having BOTH of the following:
   (a) weight NOT exceeding 13 kg;
   (b) audible timer

GRILLERS, PORTABLE, ELECTRIC

TOASTERS

COOKERS, slow, having a capacity of NOT less than 3 litres but NOT
 greater than 5 litres

WAFFLE MAKERS

HEATERS, depilatory wax, having a capacity of less than 2 kg

DEHYDRATORS, food

CORN POPPING APPLIANCES

STEAM COOKERS, rice

HOT DOG MAKER, with the following:
   (a) stainless steel heating rod;
   (b) removable steaming container;
   (c) 1-6 Frankfurter capacity;
   (d) indicator light;
   (e) non stick water bowl

COOKERS, STEAM

PIEMAKERS, ELECTRIC, DOMESTIC, having a maximum capacity of four
 individual pies

TOWEL RAILS, HEATED

COOKERS, RICE

CLEANERS, DRY STEAM VAPOUR, operating from 120 degrees C to
 135 degrees C with steam temperature of NOT less than 3 bar but
 NOT exceeding 4 bar, with or without dry steam irons

STEAM CLEANERS, with steam directing attachments being ANY of the
 following:
   (a) steam hose with gun;
   (b) floor nozzle;
   (c) hand nozzle;
   (d) detail nozzle;
   (e) extension and power nozzle;
   (f) window nozzle

OMELETTE MAKER

COOKERS, EGG BOILER, having automatic cut-off ready buzzer,
 calibrated measuring cup with built-in egg piercer, and poaching
 and steaming tray

SANDWICH MAKERS

MOSQUITO DESTROYERS, 12 V and 24 V

HEATERS, baby bottle.

STERILISERS, baby feeding bottles, six bottle capacity.

ELETRIC HEATERS, WATERBED, including BOTH of the following:
  (a) temperature sensors;
  (b) thermostat

MOSQUITO REPELLERS, including ALL of the following:
  (a) usb charging cable;
  (b) refill cartridge;
  (c) lanyard with carabiner

DIALYSIS BAG WARMER, portable, including BOTH of the following:
  (a) not less than 100 V AC and NOT greater than 240 V AC;
  (b) 12 V DC car plug

TOILETS, electric, incinerating, 240 V single phase

STEAMERS, GARMENT, with OR without ANY of the following:
  (a) fabric brush;
  (b) lint brush AND/OR pad;
  (c) steam handle AND/OR diffuser AND/OR brush AND/OR cap;
  (d) creaser;
  (e) garment hanger

DIFFUSERS, PLUG IN, with OR without insecticide refills, having 
BOTH of following:
  (a) heating element;
  (b) timer

FOOD AND PLATE WARMING DRAWERS, electric, including ALL of the 
following:
  (a) plate capacity NOT less than 14; 
  (b) telescopic draw runner;
  (c) temperature range NOT greater than 80 C

SETS, DEPILATORY WAX HEATER, with OR without depilatory wax, 
including BOTH of the following:
  (a) an electric heater with a lid;
  (b) spatula

POTS, STEAMING, SIMMERING, BOILING AND FRYING, electric

COOKERS, electric, having ALL of the following:
  (a) egg rack;
  (b) egg poaching trays

SANDWICH AND/OR WAFFLE MAKERS

COOKERS, BENCH TOP, electric, having BOTH of the following:
  (a) multi-function cooking;
  (b) removable internal pot

SETS, AIR FRESHNER, electric, plug in, consisting of BOTH of the 
following:
  (a) glass bottle of scented oil with wick;
  (b) plug in diffuser incorporating fragrance intensity 
      control

HEAT PACKS, electric

SOUS VIDE COOKERS, bench top, mobile

SLOW COOKERS, electric, benchtop, portable, having removable 
internal pot

STEAM CLEANERS, handheld, including NOT less than 4 of the 
following categories:
  (a) jet nozzle;
  (b) curved nozzle;
  (c) flexible hose; 
  (d) measuring cup; 
  (e) brush; 
  (f) T shaped window cleaning nozzle attachment; 
  (g) T shaped fabric cleaning nozzle attachment with 
      cloth cover;
  (h) funnel

MULTICOOKERS, electric, having NOT less than three of the 
following functions:
  (a) slow cooker;
  (b) fry pan;
  (c) saucepan;
  (d) deep fryer

SOUP MAKERS, COOKING AND BLENDING

SAUNAS, carbon fibre OR wood construction, infra-red heated

STEAMERS, FABRIC

HEATERS AND FROTHERS, MILK, capacity NOT greater than 0.25 L

BAKERS, CAKE, electric

MUGS, BEVERAGE, 12 volt, plug in

FOOD WARMERS, domestic, 240 V

FOOD WARMERS, electric, thermostatically controlled, having BOTH 
of the following:
  (a) tray capacity NOT greater than 2 litres;
  (b) thermostat control range NOT greater than 80 degrees C

KITCHEN APPLIANCES, FOOD PROCESSING AND COOKING, multi-
functional, electro-thermic

COOKING SETS, comprising rice cooker and slow cooker

PLATE WARMERS

FROTHERS, MILK, electric, having BOTH of the following:
  (a) heating element;
  (b) thermostatically controlled cut off

CLEANERS,FLOOR, STEAM, domestic, having a weight NOT greater 
than 4 kg

FOUNTAINS, CHOCOLATE

MAKERS, PANCAKE

MAKERS, DOUGHNUT

COOKERS, SLOW

FRYPAN AND/OR SKILLET

DISPENSERS, HOT AND COLD FILTERED WATER, capacity NOT greater than
 5 litres

FAIRY FLOSS MAKERS, domestic, having BOTH of the following:
   (a) removable extractor head;
   (b) removable bowl

STEAMERS, FACIAL

KITCHEN APPLIANCE SET, comprising ANY of the following:
   (a) kettle;
   (b) sandwich maker;
   (c) hot water jug;
 AND comprising ANY of the following:
   (a) toaster;
   (b) coffee maker;
   (c) hand held mixer

MUG WARMERS

DEEP FRYERS

SOY MILK MAKER, DOMESTIC, electric, having BOTH of the following:
   (a) grinder;
   (b) heater

DIFFUSERS, MOSQUITO REPELLENT, comprised of electric dispensing
 unit with repellent refills

KETTLES, HOT WATER, domestic

DISPENSERS, AROMATHERAPY

PARAFFIN BATHS, moist heat treatment

CLEANERS, FLOOR, STEAM, domestic, having a weight NOT
 exceeding 3.5 kg

JUGS, HOT WATER, electric, domestic

COOKERS, PRESSURE, ELECTRIC

WOKS, electric

HEATERS, resistance type, hollow bolt, die block or platen

ELEMENTS, infra-red ceramic heater

ELEMENTS, heating, made from molybdenum disilicide

ELEMENTS, furnace, recrystallised silicon carbide

HEATING CABLE, parallel resistance, power limiting, having ALL of
 the following:
   (a) nickel plated copper wire (12 awg);
   (b) nickel plated copper braid;
   (c) maximum maintenance temperature of 149 degrees C;
   (d) maximum continuous exposure temperature (cable de-energised)
       of 260 degrees C;
   (e) minimum installation temperature of -40 degrees C;
   (f) rated voltage of 120/240 V AC nominal;
   (g) earth leakage of 1.5 ma per 31 m @ 240 V AC

CABLES, heating, silicone insulated, being either sheathed/
 unsheathed, or covered with braiding, and having ALL of the
 following:
   (a) capable of operating at up to 45 W per metre;
   (b) 150 degrees C temperature rating;
   (c) diameter over the silicone insulation of up to 2.5 mm
 but NOT including heating cable suitable only for operation up to,
 but NOT exceeding 15 W per metre

HEATING ELEMENTS, positive temperature co-efficient (PTC) resistor,
 ceramic type, consisting of doped polycrystalline ceramics based on
 barium titanate

HEATING ELEMENTS, ferritic iron-chromium-aluminium alloy centre 
rod AND wire

ELEMENTS, RADIANT TUBE HEATING AND/OR GAS JET COOLING AND/OR 
FINAL HEATING HOLDING AND/OR HOT BRIDLE SNOUT, STEEL STRIP METAL 
COATING LINE, including EITHER of the following:
  (a) rod OR wire type;
  (b) spiral OR bird cage type

HOB ELEMENTS, radiant electric, iron nickel cadmium alloy, 
output NOT greater than 2550 W

HEATING CABLES, having BOTH of the following:
  (a) seamless stainless steel tube, with OR without coating;
  (b) insulated AND protective cover

HEATING MATS, electrically operated, including BOTH of the 
following:
  (a) cable;
  (b) mesh

ELEMENTS, HEATING, with OR without brackets, having ALL of the 
following:
  (a) Nichrome (NiCr) heating wire;
  (b) voltage rating NOT less than 220 V and NOT greater than
      250 V;
  (c) silicone rubber seal having a temperature rating NOT less
      than 235 degrees Celsius;
  (d) stainless steel terminals

CABLES, HEATING, UNDERFLOOR, comprising high density 
polyethylene (HDPE) sheath

CABLES, HEATING, UNDERFLOOR

FOILS, HEATING, aluminium, laminated polyester casing, having an 
output NOT greater than 165 W/m2

HEATING ELEMENTS, COMPRESSOR STATOR

CABLES, UNDERFLOOR HEATING, fep teflon and/or pvdf insulated

FOOD PROCESSOR ATTACHMENTS, whether OR not assembled, with OR 
without drive shaft, including ALL of the following:
  (a) steel cutting disc;
  (b) cutter lid;
  (c) pusher;
  (d) spiraliser

PARTS, FOOD PROCESSOR, having ALL of the following:
  (a) bowl;
  (b) bowl base;
  (c) lid;
  (d) measuring cup;
  (e) blades;
  (f) simmering basket

PARTS, FOOD PROCESSOR, being ANY of the following AND
whether OR not in sets:
  (a) blade cover AND peeler, being stainless steel disc with a
      plastic insert;
  (b) bowl;
  (c) bowl base;
  (d) lid;
  (e) measuring cup

ELEMENT ASSEMBLIES, WATER HEATER, having BOTH of the following:
  (a) seal;
  (b) ANY of the following:
          (i) 1.8kW element;
         (ii) 2.4kW element;
        (iii) 3.6kW element;
         (iv) 4.8kW element

LAMP ASSEMBLIES, GAS OR ELECTRIC OVEN, temperature rating 
exceeding 250 degrees, having BOTH of the following:
  (a) light bulbs;
  (b) ceramic sockets

OVEN AND/OR GRILLER PARTS, being ANY of the following:
   (a) aeration shutters;
   (b) boxes;
   (c) braces;
   (d) burners;
   (e) buttons;
   (f) caps;
   (g) channels;
   (h) clamps;
   (i) clips;
   (j) covers;
   (k) ducts;
   (l) gas tubes;
   (m) griddle and/or grill dish and/or trays;
   (n) guards;
   (o) hotplates;
   (p) interfaces;
   (q) knobs;
   (r) levelling feet;
   (s) mounts;
   (t) panels;
   (u) pipe manifolds;
   (v) plates;
   (w) printed circuit boards;
   (x) racks;
   (y) rails;
   (z) runners;
   (aa) shelves;
   (ab) shields;
   (ac) spacer controls;
   (ad) supports;
   (ae) trims;
   (af) vent grilles;
   (ag) vents

PARTS, COOKER, being ANY of the following:
   (a) radiant heating elements;
   (b) rod thermostats;
   (c) pan detectors;
   (d) halogen lamps

COOKTOPS, ceramic glass

RACKS AND/OR SHELVES, OVEN AND/OR GRILLER

SPEAKERS, MP3 PLAYER, with OR without pencils or markers

LOUDSPEAKERS, SINGLE, having a nominal impedance NOT greater 
than 50 ohms

SUBWOOFERS, having a diameter NOT greater than 20.5 cm

SPEAKERS, MP3 PLAYER, incorporating an MP3 player direct docking
port

SPEAKERS, MULTI-MEDIA, magnetically shielded, with a frequency range
 within 35 Hz to 20 000 Hz inclusive

SETS, MOTOR VEHICLE LOUDSPEAKER, comprising ALL of the following:
  (a) woofers;
  (b) tweeters:
  (c) audio crossovers

SETS, TV SPEAKER EXTENSION, comprising ALL of the 
following:
  (a) extension speakers;
  (b) sub-woofers;
  (c) surround sound digital signal processing circuits

LOUDSPEAKERS, MOTOR VEHICLE

SPEAKER SETS, TV SOUND EXTENSION, comprising ALL of the 
following:
  (a) extension speakers;                       
  (b) sub-woofer;                            
  (b) surround sound digital signal processors;   
  (c) infra-red remote control

SPEAKER SETS, MULTI-MEDIA, magnetically shielded, having BOTH of the
 following:
   (a) power supplies;
   (b) amplifier

HEADSETS, HEADPHONES OR STEREO EARPHONES, but NOT including ANY of
 the following:
   (a) on or in the ear types for general voice telecommunication
       purposes employing a noise cancelling microphone and
       associated amplifier which is powered directly from the
       transmission circuit;
   (b) headphones imported with junction boxes;
   (c) noise excluding headsets or headphones which incorporate
       ear-muff type fittings which fully enclose one or both ears

LOUDSPEAKERS, electronic, portable, having ALL of the following:
  (a) microphone;
  (b) vehicle attachment magnetic holders;
  (c) remote controls;
  (d) carrying cases;
  (e) voltage NOT less than 12 V and NOT greater than 36 V

KARAOKE AND/OR MUSIC SYSTEMS, having two OR more of the following:
   (a) digital video disc player;
   (b) cassette player and/or recorder;
   (c) camera;
   (d) compact disc player;
   (e) microphones;
   (f) disco lights;
   (g) bubble machine

GROUND SURVEILLANCE RADAR, portable, having ALL of the following:
  (a) ku band frequency operation;
  (b) multiple sector scanning;
  (c) ethernet interface;
  (d) built in testing;
  (e) 24 volt DC input power

DOPPLER RADAR SYSTEM, including ALL of the following:
  (a) Doppler radar antenna;
  (b) digital array receiver;
  (c) cooler;
  (d) antenna power supply;
  (e) dual frequency oscillators;
  (f) radar sensor mounting;
  (g) cameras;
  (h) antenna pedestal;
  (i) vehicle trailer;
  (j) real time processor AND data storage software;
  (k) instrumentation controller;
  (l) video tracker AND controller;
  (m) global positioning system (GPS) antenna AND time code 
      generator;
  (n) cables AND cable connectors;
  (o) radar direction aligner

IMAGING DETECTORS, ultra wideband radio frequency, including 
BOTH of the following:
  (a) single AND/OR two AND/OR three dimensional imager;
  (b) frequency NOT less than 3 GHz and NOT greater than 10 GHz

RADAR APPARATUS, TRAIN CONTROL SYSTEM

RADARS, WEATHER, comprising pedestal and combined transmitter and
 receiver

RADIO BROADCAST RECEIVERS, MOTOR VEHICLE, combined with sound
 recording or reproducing apparatus

RADIO BROADCAST RECEIVERS, MOTOR VEHICLE, including ALL of the 
following:
  (a) radio;
  (b) sound recorder;
  (c) satellite navigator;
  (d) music AND sound players;
  (e) voice recognition mobile phone connector

SETS, RADIO BROADCAST RECEIVER, MOTOR VEHICLE, including BOTH of 
the following:
  (a) radio receivers combined with sound recording or
      reproducing apparatus;     
  (b) speakers

RECEIVERS, COLOUR TELEVISION, incorporating a DVD player

TELEVISION RECEIVERS, PLASMA SCREEN, colour

MULTIMEDIA CENTRES, MOTOR VEHICLE, 12 volt, comprising liquid
 crystal display colour monitor and ANY of the following:
   (a) television receiver;
   (b) DVD player;
   (c) amplifier;
   (d) FM transmitter

RECEIVERS, COLOUR TELEVISION, Liquid Crystal Display (LCD),
 having computer connectivity

RECEIVERS, COLOUR TELEVISION

MONITORS, colour video, combined in the same housing with video
 recording or video reproducing apparatus, but NOT including
 combinations capable of accepting PAL radio frequency input
 signals

RECEIVERS, colour television, incorporating a liquid crystal
 display screen with a diagonal measurement NOT exceeding 150 mm,
 combined in the same housing with video recording or video
 reproducing apparatus

PARTS, COLOUR TELEVISION, being screen panels OR screen modules 
with OR without ONE or BOTH of the following;
  (a) frames;
  (b) printed circuit boards

POINT SHIFTER MECHANISMS, tramway, automatic, electric solenoid
 actuation

RAIL CONTROL SYSTEM, WIRED CABINET, programmable logic control

WAYSIDE RADIO UNITS, RAIL

TRAIN DETECTORS, RAIL

WHEEL DETECTORS, RAIL

SUPERVISION CABINETS, TRAIN CONTROL SYSTEM

WIRED CABINETS, WAYSIDE TRAIN CONTROL SYSTEM

PROGRAMMABLE LOGIC CONTROLLERS, TRAIN CONTROL SYSTEM

PROTECTOR EQUIPMENT, RAIL, being EITHER of the following:
  (a) control panels;
  (b) laser train detectors

BALISES

CONTROLLERS AND SIGNALLERS, RAILWAY POINT

DETECTORS, RAILWAY TRAIN, being ANY of the following:
  (a) axle (wheel) detectors;
  (b) trackside axle counter interface boxes;
  (c) track and axle evaluators

PARTS, TRAIN CONTROL SYSTEM, being ANY of the following:
  (a) wheel speed sensors;
  (b) balise antennae;
  (c) accelerometers;
  (d) pre-wired cubicles;
  (e) balises;
  (f) micro line encoding modules;
  (g) balise encoder programming tools

PARTS, RAILWAY TRAIN DETECTION SYSTEMS, being ANY of the 
following:
  (a) printed circuit boards;
  (b) lightning protectors;
  (c) transmitters;
  (d) receivers

DETECTORS, smoke and fire, ionization type, battery operated
 or mains power operated with battery back up, incorporating
 a piezoelectric alarm, but NOT including single OR
 multipoint sampling systems of the Very Early Smoke
 Detection Apparatus or equivalent types

SMOKE DETECTORS, photoelectric, incorporating a built in horn, but
 NOT including single or multipoint sampling systems of the very
 early smoke detection apparatus or equivalent types

SECURITY SYSTEMS, electronic, anti-theft, activated by electro-
 magnetic field response to metallic strips, comprising ALL of
 the following:
   (a) alarm unit;
   (b) power supply;
   (c) receiver antenna;
   (d) transmitter antenna

DETECTORS, smoke and fire, ionisation type, 9 V, battery
 operated ONLY, incorporating a piezoelectric alarm

SECURITY SYSTEMS, RADIO FREQUENCY FIELD, having ALL of the
 following:
   (a) microprocessor controller;
   (b) antenna gates;
   (c) alarm;
   (d) power supply

LINEAR HEAT DETECTORS, DISTRIBUTED TEMPERATURE SENSING, having 
ALL of the following:
  (a) fibre optic sensor cables;
  (b) low power laser NOT greater than 20 mW average power;
  (c) operating temp NOT less than -10 degrees Celsius and
        NOT greater than 150 degrees
Celsius;                                                         
  (d) measurement range NOT greater than 70 km
  (e) LED lights AND LCD indicators

SMOKE ALARMS, photoelectric, including ALL of the following:
  (a) sealed-in lithium battery DC voltage NOT greater
      than 4 V; 
  (b) horn level NOT less than 84 dB at 3 metres;
  (c) wireless connectivity

DETECTOR ALARMS, being ANY of the following: 
  (a) carbon monoxide; 
  (b) heat; 
  (c) heat AND carbon monoxide; 
  (d) heat AND smoke

SMOKE DETECTORS, photoelectric, with OR without removable 
detector modules, having ALL of the following:
  (a) mains powered 240 V AC;
  (b) 9 VDC battery backup;
  (c) rated current NOT greater than 40 mA;
  (d) flush mount base;
  (e) alarm indicator

SMOKE DETECTORS, aspirating, including ALL of the following:
  (a) detection chamber;
  (b) LCD panel display;
  (c) blue AND infrared optical detection

DETECTORS, FIRE AND/OR SMOKE AND/OR HEAT, including BOTH of the 
following:
  (a) point detector;
  (b) integrated alarm indicator,
with OR without one OR both of the following:
          (i) heat OR thermal sensor;
         (ii) optical receiver AND transmitter

ANTI-THEFT ALARMS, MERCHANDISE PROTECTION, including ALL of the 
following:
  (a) flexible steel wrap around cables with plastic outer;
  (b) inbuilt alarms;
  (c) battery powered

FIRE DETECTION SYSTEM, programmable logic controlled, having 
BOTH of the following:
  (a) NOT less than 250 independently programmable zones;
  (b) sensor cables, incorporating ALL of the following:
         (i) embedded integrated circuits;
        (ii) defined addresses; 
       (iii) semiconductor temperature sensors

ANTI-THEFT ALARMS, comprising ALL of the following:
  (a) portable;
  (b) standalone;
  (c) wireless radio frequency satellite security communicators

FUSES, current limiting, oil tight

FUSE LINKS, being ANY of the following:
   (a) current limiting type having a voltage rating exceeding
       6.6 kV and a current rating of 100 A or greater;
   (b) having a current rating of 1 000 A or greater, but NOT
       including parts therefor;
   (c) having a voltage rating exceeding 50 kV and a current
       rating exceeding 50 A;
   (d) having a voltage rating of 22 kV to 24 kV (both inclusive)
       and a current rating of 70 A or greater

FUSE LINKS, semiconductor and thyristor protection, voltage rating
 2 000 V RMS, AC and 1 500 V DC

FUSES, HRC, powder filled, having ALL of the following:
   (a) voltage NOT less than 1 000 V;
   (b) amperage NOT less than 0.5 A;
   (c) breaking capacity NOT less than 5 kA;
 but NOT including HV expulsion fuses and HV liquid filled fuses

FUSES, POWER, class A spark production, complying with 
Australian Standard 1033.1 1990 (AS1033.1 1990), having BOTH of 
the following:
  (a) voltage NOT less than 12 kv;
  (b) breaking capacity NOT less than 10 kA

BARE CIRCUIT-BREAKERS, AC, indoor, withdrawable, using SF6 gas as
 the breaking medium, being goods specified in Column 1 of the
 following Schedule and which conform to the description in
 Column 2, 3 or 4 opposite the goods:
                       THE SCHEDULE
 COLUMN 1          COLUMN 2       COLUMN 3          COLUMN 4
 Rated Voltage     Rated Normal   Rated Short       Single Capacitor
                   Current        Circuit Breaking  Bank Breaking
                                      Current           Capacity
 exceeding 1 kV    exceeding      exceeding         exceeding
 but NOT           3 000 A        48 kA             1 250 A
 exceeding 15 kV
 exceeding 15 kV    exceeding      exceeding         exceeding
 but NOT            1 600 A        29 kA             1 250 A
 exceeding 30 kV
 exceeding 30 kV    no limit       no limit          no limit
 For the purposes of this concession:
   (a) "bare circuit-breaker" means a circuit-breaker not forming
       part of complete swithgear and not incorporating ancillary
       equipment including:
     (i) busbars;
    (ii) internal division sheets;
   (iii) control and protection equipment being protection relays,
         auxiliary relays or control switches;
   (iv) sheet metal work (including housing panels and shelves),
        but NOT excepting sheetmetal work which forms an integral
        part of a withdrawable circuit breaker;
    (v) transformers;
   (b) the terms "Rated Voltage", "Rated Normal Current", "Rated
       Short Circuit Breaking Current" and "Single Capacitor Bank
       Breaking Capacity" are as defined in Australian Standard
       2006 (High Voltage Alternating Current Circuit Breakers)

CIRCUIT-BREAKERS, DC, air break, metal clad, having BOTH of the
 following:
   (a) a continuous current rating of 300 A or greater but NOT
       exceeding 12 000 A;
   (b) a voltage rating NOT exceeding 3 000 V,
 but NOT including such circuit-breakers imported with EITHER of
 the following:
   (a) control OR protection equipment being protection relays,
       auxiliary relays or control switches;
   (b) interconnection equipment being busbars OR cables

CIRCUIT BREAKERS, VACUUM, RAILWAY, having a rated voltage of NOT
 less than 27.5 kV

CIRCUIT BREAKERS, moulded case, 3 or 4 pole, having a rated current
 of NOT less than 15 Amp and NOT exceeding 100 Amp and a rated
 voltage of 1 100 V AC

CIRCUIT BREAKERS, moulded case, 3 pole, having a rated current NOT
 less than 250A and NOT more than 1250A and a rated voltage (Ue) of
 1100V. AC

RECLOSERS, circuit, automatic, single phase having a voltage rating
 exceeding 1 kV, but NOT including reclose relays

CIRCUIT BREAKERS, having ALL of the following:
  (a) maximum operating voltage exceeding 1 001 V;
  (b) current rating NOT less than 240 Amperes;
  (c) NOT less than 2 poles

CIRCUIT BREAKERS, AUTOMATIC, train roof mountable, DC, having 
BOTH of the following:
  (a) rated operating voltage NOT greater than 1 500 V;
  (b) rated normal current NOT greater than 1 500 A

CIRCUIT BREAKERS, AC, MOTORISED OUTDOOR DEAD TANK, 
comprising ALL of the following: 
  (a) continuous current rating NOT less than 1 200 A;
  (b) voltage rating NOT less than 32 kV;
  (c) gas insulated;
  (d) spring charged mechanism providing manual OR 
      motorised breaker operation

VACUUM CIRCUIT BREAKERS, having ALL of the following:
  (a) dry air insulation medium;
  (b) 3 phase alternating current;
  (c) voltage rating NOT greater than 66 kV

BARE CIRCUIT BREAKERS, DC, RAILWAY TRACKSIDE SUBSTATION
 NOTE:"Bare Circuit Breaker" means a circuit breaker incorporating
 the following equipment:
   (a) arc chute and arc extinguishing mechanism;
   (b) magnetic holding and closing coil;
   (c) contacts including current carrying and arcing;
   (d) breaker frame and operating mechanism

CIRCUIT-BREAKERS, VACUUM, INDOOR

CIRCUIT-BREAKERS, GENERATOR, three phase

CIRCUIT BREAKER OR FAULT MAKE LOAD BREAK SWITCH DISCONNECTOR
 comprising ALL of the following:
   (a) continuous current rating NOT less than 630 amps;
   (b) 3 phase, alternating current vacuum interrupters containing
       no SF6 gas;
   (c) voltage rating 12 kV or 24 kV

RING MAIN UNITS, metal housing, voltage rating of 12 kV or 24 kV
 comprising ALL of the following:
   (a) circuit breaker,
   (b) load break switch disconnector,
   (c) 3 phase alternating current vacuum interrupters containing
       no SF6 gas;
   (d) earth selector switch

BARE CIRCUIT BREAKERS, DC, RAILWAY TRACKSIDE SUBSTATION
 NOTE:"Bare Circuit Breaker" means a circuit breaker incorporating
 the following equipment:
   (a) arc chute and arc extinguishing mechanism;
   (b) magnetic holding and closing coil;
   (c) contacts including current carrying and arcing;
   (d) breaker frame and operating mechanism

CIRCUIT BREAKERS, OUTDOOR

SWITCHES, indoor, fault make load break, 11 kV or greater, but
 NOT including switch units incorporating ANY of the following:
   (a) busbars;
   (b) internal division sheets;
   (c) control and protection equipment, being protection relays,
       auxiliary relays or control switches;
   (d) sheet metalwork (including housings, panels and shelves);
   (e) transformers

TAP CHANGERS, POWER TRANSFORMER, on load

DISCONNECTOR SWITCHES, AC, with OR without earth switches, 
having ALL the following:
  (a) 3-phase;
  (b) air-insulated;
  (c) voltage NOT exceeding 550 kV;
  (d) current NOT greater than 6 000 amps;
  (e) short-time current NOT greater than 80 kA

DISCONNECTOR SWITCHES, AC, with OR without earth switches, 
having ALL of the following:
  (a) 3-phase;
  (b) air-insulated;
  (c) voltage NOT exceeding 300 kV;
  (d) current NOT greater than 4 000 amps;
  (e) short-time current NOT greater than 50 kA

DISCONNECT SWITCHES, AC, three pole, voltage NOT greater than 
362 kV

SWITCHES, DISCONNECTOR, DC, having ALL of the following:
  (a) rated voltage NOT greater than 2 000 V;
  (b) rated current NOT greater than 140 kA;
  (c) 1 OR 2 poles

LOAD BREAK SWITCHES, POWERLINE, epoxy resin OR porcelain OR 
silicon rubber insulated, rated current NOT less than 630 A, 
rated voltage NOT less than 24 kV and NOT greater than 52 kV, 
having ANY one OR more of the following:
  (a) breaking whip;
  (b) load break head;
  (c) extension part;
  (d) cable connections;
  (e) fuses;
  (f) hinge terminal bar;
  (g) connection bar;
  (h) connecting clamps;
  (i) spark gaps;
  (j) surge arrester brackets;
  (k) earthing accessories;
  (l) operating handles;
  (m) auxiliary contacts;
  (n) hookstick operating mechanism;
  (o) operating rods;
  (p) crossarms;
  (q) crossarm clamps

SWITCH DISCONNECTORS, DC, having ALL of the following:
  (a) voltage NOT greater than 1 500 V;
  (b) current NOT greater than 25 A;
  (c) 2 poles

SWITCH DISCONNECTORS, DC, having ALL of the following:
  (a) rated voltage NOT greater than 1 200 V;
  (b) rated current NOT greater than 125 A;
  (c) 3 OR 4 poles

EARTH SWITCHES, having a rated voltage NOT less than 22 kV

DISCONNECTOR SWITCHES (ISOLATORS), DC, having a rated voltage NOT
 less than 20 kV

SWITCHES, DISCONNECT, AC, 3 phase, having a rated voltage NOT
 less than 420 kV

SURGE ARRESTERS, metal oxide, with OR without 
insulating brackets, having a polymer housing

LIGHTNING ARRESTORS, PASSENGER TRAIN

SURGE ARRESTERS, METAL OXIDE

ISOLATORS, BROADBAND SHIELDING, water resistant

LIMITERS, CIRCUIT INTERRUPTION, operating voltage of 12 kV OR
 greater and a short circuit current greater than 50 kA

BARE CONTACTORS AIR BREAK, sulphur hexafluoride or vacuum but NOT
 including contactors fitted with ANY of the following:
   (a) primary circuit disconnect contact arms and contacts;
   (b) auxiliary circuit plugs and connections;
   (c) fuse mountings and accessories;
   (d) voltage transformers;
   (e) metalwork and associated components for draw out contactor
       arrangements

SWITCHES, reed, enclosed in a hermetically sealed glass case

FUSE HOLDERS, current limiting, oil immersed, having a rated
 voltage of 8.3 kV or greater, with facility for the external
 removal of transformer fuses from the transformer tank

CONTACTORS, DC TRACTION, having ALL of the following:
   (a) a thermal current rating of NOT less than 350 A;
   (b) NOT exceeding 2 main poles;
   (c) maximum operating voltage of NOT less than 1 500 and NOT
       exceeding 2 000 V DC

FITTINGS, PREMOULDED, ELECTRIC POWER CABLE, POLYMERIC INSULATED,
 having a voltage rating exceeding 1 kV, being ANY of the following:
   (a) power cable connectors;
   (b) power cable joints;
   (c) power cable terminations,
 but NOT including such goods when imported with filling compounds

CRIMPING TERMINALS, having bell-mouth OR flared cable entry

CLAMPS, high voltage cable, forged aluminium alloy, screw up,
 having a maximum permissible short-circuit current rating of
 23.5 kA/second and having a clamping range NOT less than 4.5 mm
 but NOT greater than 85 mm

TEST CONNECTORS, SUBSEA, rated voltage NOT less than 4.5 kV

EARTHING SYSTEM, ELECTRIC FAULT PROTECTION, including ALL of 
the following:
  (a) arc suppression coil;
  (b) cabinet, having electronic circuits; 
  (c) control cabinet, having a display screen

SLIP RING COLLECTOR, WIRELINE LOGGING CABLE WINCH DRUM, whether 
OR not assembled, including ALL of the following:
  (a) rotor;
  (b) stator;
  (c) terminal;
  (d) brushes;
  (e) maximum rated current NOT greater than 7 A

KITS, CABLE JOINING, including ALL of the following:
  (a) with OR without connectors;
  (b) with OR without shear head bolts;
  (c) wire shields;
  (d) copper mesh AND tubing;
  (e) heat-shrink joints AND/OR tubing

CABLE TERMINATIONS, having BOTH of the following:
  (a) operating voltage NOT exceeding 72 kV;
  (b) heat shrinkable tubing

CABLE TERMINATION AND CONNECTION SYSTEM, screened, separable, 
having ALL of the following:
  (a) operating voltage rating NOT greater than 42 kV;
  (b) continuous current rating NOT greater than 1 250 A;
  (c) connector cross-section NOT less than 25 mm2 and NOT 
      greater than 800 mm2

CLAMPS, parallel grooved forged copper, having BOTH of the 
following:
  (a) operating voltage rating NOT greater than 33 kV;
  (b) clamping range NOT less than 6 mm and NOT greater than 
      150 mm

CONNECTORS, RF, coaxial, having an operating voltage exceeding 
1 000 V

PARTS, OVERHEAD ELECTRIC WIRE SYSTEM, being conical coupling 
connectors

VACUUM CONTACTORS, fixed OR withdrawable, with OR without fuse 
holders AND/OR fuses, having ALL of the following:
  (a) rated voltage NOT less than 3.6 kV and NOT greater than 
      12 kV;
  (b) multi voltage feeder;
  (c) vacuum interrupters;
  (d) auxiliary contacts

OUTDOOR TERMINATIONS, POWER CABLE, premoulded, having BOTH of 
the following:
  (a) polymeric and/or porcelain insulators;
  (b) voltage rating of NOT less than 70 kV and NOT
      greater than 550 kV

LINK BOXES, POWER CABLE, having ALL of the following:    
  (a) galvanised and/or stainless steel boxes;           
  (b) rubber gaskets;                                    
  (c) conductor connectors and/or earthing connectors

JOINTS, POWER CABLE, premoulded, having a voltage rating of NOT 
less than 70 kV and NOT greater than 550 kV

JOINTS, POWER CABLE, 330 kV

POWER CABLE TERMINATIONS, being ANY of the following:
   (a) oil OR gas filled;
   (b) oil OR gas immersion

FUSES, subminiature, plug-in or pigtail with mating fuse
 holders, body dimensions NOT exceeding 10 mm x 10 mm x 10 mm

FUSE LINKS, having a current rating of 1 000 A or greater, but NOT
 including parts therefor

FUSE LINKS, having ALL of the following:
   (a) dimensions NOT exceeding 6.35 mm x 32.0 mm;
   (b) current rating NOT exceeding 50 A;
   (c) voltage rating NOT exceeding 250 V

FUSE CARTRIDGES, glass tube, rated voltage less than 500 V, being
 EITHER of the following:
   (a) slow blow type NOT exceeding 200 mA;
   (b) fast acting type NOT exceeding 30 mA

FUSES, motorcycle

FUSES AND FUSE HOLDERS, subminiature, plug in or pigtail type known
 as picofuses or microfuses, dimensions NOT exceeding 6 mm x 18 mm

FUSE LINKS, semiconductor protection, having BOTH of the following:
   (a) dimensions NOT exceeding 10.3 mm x 38.1 mm;
   (b) current rating 1 A or greater but NOT exceeding 20 A

FUSES, blade terminal type, having a voltage rating NOT
 exceeding 32 V

FUSE LINKS, having a current rating of 0.25 A or greater but NOT
 exceeding 200.00 A, to British Defence Specifications DEF 63 A

FUSE LINKS, semiconductor and thyristor protection, having ALL of
 the following:
   (a) current rating 20 A or less;
   (b) voltage rating 450 V peak, 240 V RMS, AC and 200 V DC

FUSE LINKS, semiconductor and thyristor protection, voltage rating
 1 550 V peak, 1 000 V RMS, AC and 700 V DC

FUSE LINKS, semiconductor and thyristor protection, voltage rating
 800 V RMS, AC and 500 V DC

FUSES, LAMP BATTERY, MINERS", 4V, 3A, encapsulated

POWER SEMICONDUCTOR FUSES, rated voltage 660 V or 1 250 V, current
 rating of 10 A or greater but NOT exceeding 7 500 A

FUSE LINKS, HRC, having ALL of the following:
   (a) voltage rating of 415 V or greater but NOT exceeding 600 V;
   (b) current rating of 2 A or greater but NOT exceeding 1 250 A;
   (c) breaking capacity of NOT less than 80 kA

FUSES, HRC, voltage rating 660 V, current rating NOT less than
 100 A and rupturing capacity NOT less than 80 kA

FUSE LINKS, semiconductor and thyristor protection, voltage rating
 660 V - 1 000 V AC, to VDE 0636/23 specification with utilisation
 category gR or aR

FUSES, midi type, having BOTH of the following:
  a) current rating NOT exceeding 200 amps;
  b) voltage NOT exceeding 32 V DC

FUSE LINKS, having ALL of the following:  
  (a) current rating NOT less than 2 A and NOT greater 
      than 1 250 A;
  (b) breaking capacity of NOT less than 80 KA

CIRCUIT-BREAKERS, DC, rated voltage exceeding 500 V and rated
 normal current exceeding 1 000 A

PROTECTORS, THERMAL MOTOR, on-winding, having no external feedback
 path or controller

PROTECTORS, THERMAL, bimetal disc, having BOTH of the following:
   (a) a cut off temperature of 60 degrees C, or greater but
       NOT exceeding 350 degrees C;
   (b) a current rating NOT exceeding 25 A

CIRCUIT BREAKERS, thermal, magnetic, having ALL of the following:
   (a) single pole snap action mechanism;
   (b) push button reset;
   (c) blade terminals 6.3 mm wide;
   (d) plug in mounting;
   (e) current rating NOT exceeding 16 A;
   (f) maximum voltage rating 250 V AC OR 65 V DC;
   (g) maximum interrupting capacity 400 A;
   (h) overall dimensions NOT exceeding 72 mm x 50 mm x 11.5 mm

CIRCUIT BREAKERS, THERMAL SENSING, width or diameter NOT exceeding
 14 mm, fitted with connectors, but NOT including circuit breakers
 of the plug in type OR din rail mounting type

CIRCUIT BREAKERS, AC, having ALL of the following:
   (a) NOT less than two poles and NOT exceeding six poles;
   (b) a current rating NOT less than 125 A and NOT exceeding
       6 300 A;
   (c) a rated operational voltage of NOT less than 460 V and NOT
       exceeding 690 V

CIRCUIT BREAKERS, 3 and 4 pole incorporating an electronic 8-bit
 microprocessor based protection device which detects true R.M.S.
 (root mean squared) values of load currents, and having ALL of the
 following:
   (a) adjustable long time-delay trip (Ltd);
   (b) adjustable short time-delay trip (Std);
   (c) adjustable instantaneous trip (Inst);
   (d) Adjustable ground fault trip (Gft);
   (e) Adjustable pre-trip alarm (Pta);
   (f) adjustable rated current from 50% to 100% of the nominal rated
       current and adjustable in 15 steps

CIRCUIT BREAKERS FOR EQUIPMENT (CBE), thermal, having ALL of the
 following:
   (a) panel mounting;
   (b) either s-type, r-type or m-type to IEC 934;
   (c) current rating NOT exceeding 35 amps;
   (d) blade or screw terminals;
   (e) operating voltage rating NOT exceeding 250 V-AC, or 28 V DC;
   (f) minimum insulation value 2.5 kV (to IEC 664 and 664A);
   (g) approved by Lloyds register of shipping for use in commercial
       marine applications

CIRCUIT BREAKERS, having ALL of the following:
  (a) operating voltage NOT exceeding 1 000 V;
  (b) current rating NOT less than 240 Amperes;
  (c) NOT less than 2 poles

CIRCUIT BREAKERS, AC AND/OR DC, multiple pole, having BOTH of 
the following:
  (a) current rating NOT less than 400 A;
  (b) operating voltage NOT greater than 1 000 V

CIRCUIT BREAKERS, DC, having BOTH of the following:
  (a) rated voltage NOT less than 600 V and NOT greater 
      than 1 000 V;
  (b) rated current NOT greater than 125 A

CIRCUIT BREAKERS, AC AND/OR DC, having ALL of the 
following: 
  (a) not LESS than 2 poles and NOT exceeding 4 poles;
  (b) current rating NOT less than 125 A and NOT greater than    
      6 300 A;
  (c) operating voltage not LESS than 460 V and NOT 
      greater than 750 V

CIRCUIT BREAKERS, AC AND/OR DC, having ALL of the following:
  (a) current rating NOT greater than 400 A;
  (b) single OR multiple pole;
  (c) operating voltage NOT greater than 1 000 V AC

CIRCUIT BREAKERS, RESIDUAL CURRENT AND OVERCURRENT PROTECTION, 
non DIN rail mounted

CIRCUIT BREAKERS, industrial, hydraulic magnetic, conforming to 
Australian Standard AS 3111-1994

CIRCUIT BREAKERS, RESIDUAL CURRENT AND OVERCURRENT PROTECTION 
(RCBO), DIN rail mount

MICROLOGIC TRIP UNIT, multi-poles, having ALL of the following:
  (a) network frequency NOT greater than 60 Hz;
  (b) trip unit rating NOT less than 400 A and NOT greater than 
      6300 A; 
  (c) instantaneous short circuit protection;
  (d) long time overload protection

RELAYS, having a continuous contact rating of NOT less than 3 A and
 body dimensions NOT exceeding 40 mm x 30 mm x 27 mm

CONTACTORS, having BOTH of the following:
   (a) normally closed main poles;
   (b) DC rated current 9 A or greater

RELAYS, cradle, having ALL of the following:
   (a) maximum switching current NOT exceeding 5 A (AC or DC);
   (b) switching voltage NOT exceeding 250 V (AC or DC);
   (c) body dimensions NOT exceeding 31 mm x 36 mm x 19 mm

RELAYS, motorcycle

RELAYS, mercury wetted, contact type

RELAYS, magnetically polarised (but NOT including sockets
 therefor), being EITHER of the following:
   (a) relays having EITHER of the following:
         (i) a sensitivity NOT exceeding 75 A turns operating
             at normal voltage;
        (ii) body dimensions NOT exceeding 30 mm x 30 mm x 20 mm;
   (b) relays of the carpenter type

RELAYS, thermostatic delay

RELAYS, coaxial

RELAYS, being EITHER of the following:
   (a) assembly of two 12 V, 30 A single pole relays in a common
       enclosure;
   (b) assembly of two 24 V, 20 A single pole relays in a common
       enclosure

RELAYS, PRINTED CIRCUIT BOARD, having a height NOT exceeding 30.0 mm

RELAYS, low profile, OTHER THAN reed relays, being EITHER of the
 following:
   (a) height NOT exceeding 21.24 mm;
   (b) height NOT exceeding 35 mm and having a continuous current
       rating NOT less than 8 A AC

RELAYS, printed circuit mounted, OTHER THAN reed relays, being
 EITHER of the following:
   (a) height NOT exceeding 24 mm;
   (b) height NOT exceeding 35 mm and having a continuous contact
       rating NOT less than 8 A AC

RELAYS, complying with British Railways Board specifications
 BR930 to BR968, NOT including bases or plugboards

RELAYS, solid state, having a voltage range NOT exceeding 60 V AC
 or 60 V DC, but Not including protective monitoring relays

RELAYS, distance, having ALL of the following:
   (a) NOT less than 3 zones of measurement;
   (b) switch on to fault logic

RELAYS, reed, encapsulated, PCB mounting

RELAYS, SWITCH AMPLIFIER, having a supply voltage NOT 
greater than 40 v

SURFACE MOUNT RELAYS, PRINTED CIRCUIT BOARD, direct current 
(DC), having a coil voltage NOT exceeding 60 VDC

RELAYS, having an operating voltage NOT exceeding 48 volts, 
having ANY of the following:
  (a) spring loaded terminals;
  (b) plug-in screw terminals;
  (c) wire connected terminals

RELAYS, having ALL of the following:
   (a) one, two or three contacts;
   (b) maximum continuous contact current rating of NOT less than
       15 A;
   (c) maximum contact voltage rating of NOT less than 380 V;
   (d) maximum switched power rating of NOT less than 4 000 VA

RELAYS, thermal replica, with heating and cooling constants
 and negative phase sequence compensation

RELAYS, coaxial, coil ratings NOT exceeding 250 V

RELAYS, thermal overload, having ALL of the following
 characteristics:
   (a) trip time NOT exceeding 5 s at 6 times full load current;
   (b) manual reset;
   (c) maximum current 50 A

RELAYS, thermostatic delay

RELAYS, vacuum, hermetically sealed

RELAYS, having a continuous contact rating of NOT less than 3 A
 and body dimensions NOT exceeding 40 mm x 30 mm x 25 mm

RELAYS, multipole, enclosed, capable of ALL of the following:
   (a) continuous operation over the temperature range - 40 degrees C
       to + 80 degrees C (both inclusive);
   (b) 8 h operation without failure at + 100 degrees C;
   (c) relay contacts shall NOT arc when the mounted relays are
       subjected to the following vibration displacements and
       frequencies:
         (i) 4.83 mm at a frequency of 15 Hz;
        (ii) 2.54 mm at a frequency of 20 Hz;
       (iii) 0.51 mm at a frequency of 37 Hz

CONTACTORS, having BOTH of the following:
   (a) normally closed main poles;
   (b) DC rated current 9 A or greater

RELAYS, power, photo-isolated, solid-state

CONTACTORS, DC, air break, rated operational current 1 500 A or
 greater

CONTACTORS, AC, having a rated thermal current (ITH) NOT less than
 than 270 A
   For the purposes of TC 8333302 thermal current rating is to be
   in compliance with AS1029 or equivalent specifications

RELAYS, INTELLIGENT OBJECT TERMINAL

RELAYS, REED, dual in-line package (DIP) OR single in-line
 package (SIP)

CONTACTORS, DC TRACTION, having ALL of the following:
   (a) a thermal current rating of NOT less than 80 A
       and NOT exceeding 600 A;
   (b) NOT exceeding 4 main poles;
   (c) maximum operating voltage NOT exceeding 1 000 V DC

CONTACTORS, DC TRACTION CIRCUIT, single pole, switching

RELAYS, low profile, OTHER THAN reed relays, being EITHER of the
 following:
   (a) height NOT exceeding 21.24 mm;
   (b) height NOT exceeding 35 mm and having a continuous current
       rating NOT less than 8A AC

RELAYS, complying with British Railways Board specifications
 BR930 to BR968, NOT including bases or plugboards

RELAYS, GENERATOR PROTECTION, digital, capable of providing
 acquisition and evaluation of measured values and having ALL of the
 following capabilities:
   (a) stator overload protection;
   (b) underexcitation protection;
   (c) overvoltage protection;
   (d) undervoltage protection;
   (e) overfrequency protection;
   (f) underfrequency protection;
   (g) reverse power protection;
   (h) forward power monitoring

RELAY SYSTEMS, low impedance busbar protection, comprising ANY of
 the goods listed in Table A imported with one or more of the
 goods listed in Table B:
      Table A
   (a) zone measuring modules;
   (b) alarm modules;
   (c) test modules;
   (d) power supply
      Table B
   (a) bus coupler modules;
   (b) feeder breaker modules;
   (c) bus section breaker modules;
   (d) bus selection isolator modules;
   (e) bus section isolator modules;
   (f) buswire access modules

RELAYS, solid state, having an operating voltage NOT exceeding
 600 V AC or 300 V DC, but NOT including protective monitoring
 relays

RELAYS, directional, with an operating characteristic
 limited to +/- 90 degrees of the relay characteristic angle,
 but NOT including distance relays

RELAYS, distance, having ALL of the following:
   (a) NOT less than 3 zones of measurement;
   (b) switch on to fault logic

RELAYS, SWITCH AMPLIFIER, having a supply voltage NOT 
greater than 500 v

RELAYS, PRINTED CIRCUIT BOARD

SWITCHES, static transfer, having ALL of the following:
  (a)  three phase;
  (b)  nominal output voltage NOT less than 120 V and NOT   
       greater than 400 V;
  (c)  output power capacity NOT less than 80 kW and NOT     
       greater than 500 kW

CONTACTORS, single OR multi-pole, for a voltage NOT exceeding 
1000 V

RELAYS, having an operating voltage NOT exceeding 250 volts, 
having ANY of the following:
  (a) spring loaded terminals;
  (b) plug-in screw terminals;
  (c) wire connected terminals

RELAYS, OVERLOAD PROTECTION, solid state, with or without reset, 
having multiple trip classes

RELAYS,THERMAL OVERLOAD, non solid state, with or without reset

RELAYS, POWER TRANSFORMER, oil tight to transformer oil at 100 
degrees centigrade and 1 bar

RELAYS, BIASED DIFFERENTIAL

ARMRESTS, TOILET SUITE, including ALL of the following:
  (a) toilet roll holder;
  (b) nurse call button;
  (c) fittings

SWITCHES, WATERFLOW MONITORING, SPRINKLER SYSTEM, comprising BOTH
of the following:
  (a) vane water flow switch;
  (b) switch tester, including ALL of the following:
         (i) pump;
        (ii) valves;
       (iii) pipes;
        (iv) pipe fittings

SWITCHES, waterflow activated, vane type

RESIDUAL CURRENT DEVICES (RCD), non DIN rail mounted

RESIDUAL CURRENT DEVICES, industrial, hydraulic magnetic, 
conforming to Australian/New Zealand Standard AS/NZS 3190:2002

RESIDUAL CURRENT DEVICE (RCD), DIN rail mount

SWITCHES, SAFETY GATE MONITORING, being ANY of the following:
  (a) mechanical switches;
  (b) non-contact magnetic switches;
  (c) non-contact radio frequency coded switches

PARTS, OFF-HIGHWAY TRUCKS AND EARTHMOVING MACHINES HAVING A 
VOLTAGE RATING NOT LESS THAN 24 V, being EITHER of the following:
  (a) electrical switches;
  (b) actuators

PARTS, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS 
THAN 7.5 TONNES, being EITHER of the following:
  (a) electrical switches;
  (b) actuators

SWITCHES, ELECTRIC, ROTARY

SWITCHES, DIFFERENTIAL PRESSURE

LOCKS, electric key switch, comprising BOTH of the following:
  (a) keys;                                                  
  (b) wiring loom

LOCKS, electric key switch, comprising BOTH of the following:
  (a) keys;                                                  
  (b) housing assembly

SWITCHES, POSITION CONTROLLER, LINEAR ACTUATOR

SWITCHES, energy regulator

SWITCHES, hexagonal, push button, illuminated

SOCKETS, 6 V or 12 V, single contact, being lamp receptacles with
 insulating sleeves

SOCKETS, GLOBE, EDISON SCREW

LAMPHOLDERS, fluorescent for G13 cap lamps, with or without starter
 holder, having ALL of the following:
   (a) push fix or push through mounting;
   (b) polycarbonate body moulding;
   (c) polybutylenterephthalat rotor moulding;
   (d) phosphor bronze electrical contacts and self locking
       terminals;
   (e) manufactured to IEC 61-2, IEC400/EN 60400 with temperature
       rating T110 or above
 but NOT including lampholders of the following type:
   (a) tombstone lampholders for 10.3-10.5 x 25.5 mm metalware cut
       out;
   (b) tombstone or end fixing button design with screw terminals for
       wire connection

LAMP HOLDERS, Being EITHER of the following:
   (a) ceramic, with the metal conductors sealed within the holder
       body, excluding fluorescent,SBC, BC, and ES type holders;
                               OR
   (b) moulded plastic, with a removable cable/wire cover having the
       metal conductors sealed within the holder body, excluding
       fluorescent, SBC, BC, and ES type holders

LAMPHOLDERS, CERAMIC

LAMP HOLDERS, having BOTH of the following:
  (a) voltage capacity NOT less than 240 V AC;
  (b) bayonet cap

PLUGS, modular, telephone, to suit RJ 11 sockets and complying
 with US Standard FCC 68

PLUGS, phono, RCA type

CONTACT PINS, male or female, gold plated, being parts for data
 terminating equipment and data circuit termination equipment
 interface connectors which conform/comply with ALL of the
 following:
   (a) ISO standard 2593 as revised by ISO TC 97/SC6 N2599 and
       3236;
   (b) Consultative Committee International Telegraph and
       Telephones (CCITT) standards for data transmission at
       48 kilobites per second using 60-108 kHz group band
       circuits;
   (c) US military specification MIL-C-39029 and its equivalents

PLUGS, 6.3 mm dia, mono or stereo with tip ring(s) and sleeve

CONNECTORS, 10, 14, 24, 36, 50 or 64 position, complying with or
 interchangeable with connectors complying with British Telecom
 (BT) specification D2635A for connector 226

CONNECTORS, multi-pin D sub-miniature type, male or female but NOT
 including connectors of the insulation displacement type or
 connectors imported with back shells or connectors assembled with
 back shells to form plugs or interconnecting leads made up
 utilising such plugs

PLUGS/SOCKETS, adaptor being EITHER of the following:
   (a) providing for plug or socket configurations used in
       other countries to connect to Australian standard plugs
       or sockets;
   (b) providing for plug or socket configurations of Australian
       standard type to connect to plugs or sockets used in
       other countries

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more
   For the purposes of TC 8632469 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

JACKS, phono, RCA Type

ADAPTORS, plug, audio equipment connector, being ANY of the
 following:
   (a) 3.5 mm plug to 6.5 mm socket;
   (b) 6.3 mm plug to 3.5 mm socket;
   (c) 6.3 mm plug to RCA socket;
   (d) RCA plug to 3.5 mm socket;
   (e) RCA plug to 6.5 mm socket;
   (f) 3.5 mm plug to RCA socket

CONNECTORS, being ANY of the following:
   (a) bayonet naval connector adaptors;
   (b) male to male 3.5 mm pin coaxial adaptors;
   (c) cable joiner coaxial adaptors;
   (d) 3.5 mm plug to 3.5 mm sockets;
   (e) 3.5 mm plug to 6.5 mm sockets;
   (f) video plugs;
   (g) car radio antennae plugs;
   (h) car radio antennae sockets

PLUG AND SOCKET COMBINATIONS, being ANY of the following:
   (a) 2, 3, 4, 6, 9, 12 OR 15 way, rated to 300 V, maximum current
       of 15 amps;
   (b) 2, 3 OR 12 way, single in line pin header;
   (c) 1.3 mm plug to 2.1 mm socket;
   (d) 2.5 mm plug to 3.5 mm socket

SOCKETS, being ANY of the following:
   (a) single pin, NOT exceeding 3.5 mm;
   (b) micro, single pin, 2 mm;
   (c) DC power connector, 2.1 mm OR 2.5 mm;
   (d) 9 pin OR 15 pin, sub D;
   (e) 2, 4 OR 8 pole microphone connector;
   (f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
   (g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on

PLUGS, being ANY of the following:
   (a) single pin, NOT exceeding 3.5 mm;
   (b) micro, single pin, 2 mm;
   (c) DC power, 1.3 mm, 2.1 mm OR 2.5 mm;
   (d) 9 pin OR 15 pin, sub D;
   (e) 2, 4 OR 8 pole microphone connection;
   (f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN

PLUGS OR JACKS, THERMOCOUPLE CIRCUITRY

CONNECTORS, electronic, insulation displacing contacts (IDC), mass
 termination, having BOTH of the following:
   (a) self-aligning cable grooves;
   (b) integral side latches

SOCKETS, INTEGRATED CIRCUIT

CONNECTORS, electrical, being ANY of the following:
   (a) rectangular rack and panel;
   (b) cylindrical; or
   (c) RF coaxial
 and manufactured in accordance with ANY of the following military
 specifications listed in the table below:
                         TABLE
               Rectangular rack and panel connectors
 MIL-C-8384, MIL-C-21671, MIL-C-26518, MIL-C-28731, MIL-C-28748,
 MIL-C-28804, MIL-C-81659, MIL-C-83527, MIL-C-83733, MIL-C-85028,
 ARINC 600, ARINC 404
                        Cylindrical connectors
 MIL-C-85049, MIL-C-5015,  MIL-C-10544, MIL-C-12520, MIL-C-22249,
 MIL-C-22539, MIL-C-22992, MIL-C-24217, MIL-C-25955, MIL-C-26482,
 MIL-C-26500, MIL-C-83723, MIL-C-27599, MIL-C-28840, MIL-C-38300,
 MIL-C-38999, MIL-C-55116, MIL-C-55181, MIL-C-55243, MIL-C-81511.
 MIL-C-81703, MIL-C-83723, NAS 1599
                        RF coaxial connectors
 MIL-A-55339, MIL-C-3643, MIL-C-3650, M26637/1, M26337/2, M39012/07,
 M39012/08, M39012/09, M39012/10, M39012/11, M39012/12,
 M39012/14, M39012/18,
 M39012/20, M39012/23, M39012/24,
 M39012/29, M39012/30,
 M39012/33, M39012/34, M39012/35, M39012/36, M39012/37,
 M39012/38, M39012/39, M39012/40, M39012/41, M39012/42, M39012/43,
 M39012/44, M39012/45, M39012/46, M39012/47, M39012/48, M39012/49,
 M39012/55, M39012/56, M39012/57, M39012/58, M39012/60, M39012/61,
 M39012/62, M39012/63, M39012/64, M39012/65, M39012/66, M39012/67,
 M39012/68, M39012/69, M39012/70, M39012/71, M39012/73, M39012/74,
 M39012/75, M39012/76, M39012/77, M39012/79, M39012/80, M39012/81,
 M39012/82, M39012/84, M39012/85, M39012/86, M39012/87, M39012/88,
 M39012/89, M39012/90, M39012/91, M39012/92, M39012/93, M39012/94,
 M39012/95, M39012/96, M39012/100, M39012/101, M39012/102,
 M39012/103, M39012/104, M3655/01, M3655/02, M3655/04, M3655/05,
 M3655/06, M3655/07, M3655/08, M3655/09, M3655/10, M3655/11,
 M3655/12, M3655/13, M3655/14, M3655/15, M3655/16, M3655/17,
 M3655/18, M3655/19, M3655/20, M3655/21, M3655/22, M3655/23,
 M35516/16, M25516/17, M25516/18, M25516/19, M25516/20, M25516/21,
 M25516/22, M25516/25, M25516/27, M25516/28, M25516/29, M27434/5,

CONNECTORS, electrical, incorporating twist locking mechanism

CONNECTORS, electrical, circular bayonet type, manufactured in
 accordance with EITHER VG 95 234 OR MIL C 5015

CONNECTORS, having a minimum pressure rating of 100 bar (10 kPa)

ADAPTORS, TELEPHONE OR COMPUTER, being ANY of the following:
   (a) TELEPHONE:
         (i) standard line to modular;
        (ii) two device connection to one socket or plug;
   (b) COMPUTER:
         (i) 25 pin to 25 pin;
        (ii) 9 pin to 25 pin;
       (iii) gender changers;
        (iv) RJ11 to D825;
         (v) 6 pin to 5 pin

SOCKETS, 3, 4 or 5 pin, gold contact, having a socket diameter of
 less than 3 mm

POWER POINTS, printed circuit board, single OR multiple power 
outlets, with OR without EITHER of the following:
  (a) single OR multiple touch controlled power switches;
  (b) wireless group control

POWER POINTS, plastic AND/OR metal, single OR multiple power 
outlet, with OR without EITHER of the following:
  (a) LED (light-emitting diode) night light;
  (b) single OR multiple power switches

POWER POINTS, plastic, with OR without USB portal OR 
LED night light portal, being ANY of the following:
  (a) single outlet;
  (b) double outlet;
  (c) triple outlet;
  (d) quadruple outlet

CONNECTORS, ELECTRICAL, being ANY of the following:
  (a) plugs;
  (b) sockets;
  (c) adaptors

CONNECTORS, AUDIO AND/OR VIDEO, being ANY of the following:
  (a) plugs;
  (b) sockets;
  (c) adaptors

DOUBLE ADAPTORS, POWER POINT, with OR without surge protectors

JACKS, CONNECTION, DATA CABLE

CONNECTORS, switching, electrical, having ALL of the 
following:
  (a) single OR three phase switching;
  (b) current rating NOT less than 16 A and NOT greater
      than 250 A;
  (c) operating voltage NOT greater than 690 V;
  (d) AC23 rating for load switching;
  (e) dependant manual operation;
  (f) IP (International Protection) 20 rating

CONNECTORS, ELECTRICAL, MODULAR, complying with Australian/New 
Zealand Standard AS/NZS 3080:2003 and American National 
Standards Institute, Telecommunications Industry 
Association/Electronic Industries Alliance, TIA/EIA-568-B.2

ADAPTORS, BATTERY, MOBILE PHONE

CONNECTORS, OPTICAL FIBRE

CASSETTES, FIBER OPTIC, with OR without adapters

CABLE CONNECTORS, FIBRE OPTIC, OIL AND/ OR GAS WELL, with OR 
without gauge port

REPAIR JOINTS, SUBSEA CABLES

FIBRE OPTIC CABLE CONNECTOR ASSEMBLIES, including ALL of the 
following:
  (a) steel shelf;
  (b) fibre optic cable organising and connecting trays;
  (c) fibre optic cable pigtails;
  (d) ceramic connector adapters

CASSETTES, FIBER OPTIC, with OR without adapters

CONNECTORS, OPTICAL FIBRE

HOLDERS, dry cell

CONNECTORS, voltage selecting and fused

LUG FRAMES, BATTERY

CATHODIC PROTECTION TEST STATIONS

CLOCKSPRINGS, STEERING COLUMN, MOTOR VEHICLE

CONNECTION AND CONTACT ELEMENT MODULES, TELEPHONE CABLE

LUGS, being solderable, copper connectors

HANDSETS, remote control, with cable to enable connection to video
 cassette recorders OR video cameras

CONTROL PANELS, remote, television camera

CONTROLS, dictating/transcribing machine

CONTROLLERS, sequence, joy stick type, with spring return to
 central off position

POWER ENTRY PANELS, having BOTH of the following:
   (a) surge protection;
   (b) power fail interrupt detection

MOUNTING UNITS, POWER SUPPLY

CONTROL UNITS, REMOTE

CONTROLLER, JOYSTICK, VALVE OR TRANSMISSION, electric, manual,
 having ALL of the following:
   (a) panel mounted or mounted in an enclosure;
   (b) spring centering;
   (c) single, double or triple axis;
   (d) potentiometers or CAM operated micro switches

CONTROLS, INDUSTRIAL BURNER, incorporating firing sequence control
 circuitry

CONTROLS, CLOSED CIRCUIT TELEVISION CAMERA, pan and tilt or
 scanner, zoom lens optional

COMPONENTS, COLOUR TELEVISION CAMERAS, being EITHER of the
 following:
   (a) remote control units;
   (b) control panels

CONTROL PANELS, BROADCAST EQUIPMENT AND ROUTING SWITCHERS, having
 ALL the following:
   (a) key switch functions which are fully programmable from a PC;
   (b) visual display (lamps/intelligent character displays) which
       provide status of equipment under its control

CONTROL INTERFACES, BROADCAST EQUIPMENT AND ROUTING SWITCHERS,
 having ALL the following features:
   (a) serial ports which are fully configurable from a PC, for
       connection to control panels or equipment under control;
   (b) ethernet port for connection to a LAN base facility control
       system;
   (c) control hardware for operations in a fully automatic redundant
       mode;
   (d) relay providing alarm contact closure under fault condition

CONTROLLERS, manual or computer operated, having ALL of the
 following:
   (a) capable of connection to host computer via RS232 or RS485
       serial communications link;
   (b) capable of operating between 1 and 240 remote field stations;
   (c) single 2 wire current loop;
   (d) loop back fault isolation circuitry;
   (e) continuous monitoring of loop circuit integrity;
   (f) data transfer protocol prioritising commands from controller
       to remote field stations over monitoring feedback reports from
       remote field stations

CONTROLLERS, irrigation, time switch, operated by two 9 Volt
 batteries, for mounting on either two way or three way valves for
 program watering

CONTROLLERS, irrigation, time switch, battery operated 9 V DC
 capable of operating between one and four linear actuator flow
 control valves in remote irrigation systems

LEADS AND CONTROL BOXES, being parts for water filled submersible
 bore hole pump motors, power rating 0.25 kW to 150 kW

CONTROL MODULES, MAGNETIC BEARING, SUBSEA, having ALL of the 
following:
  (a) power bottles;
  (b) control bottle;
  (c) pressure compensated compartment

CONTROL UNITS, TRAILER LAMP, including ALL of the following:
  (a) plastic enclosure;
  (b) printed circuit board;
  (c) header AND/OR connector;
  (d) capacitors;
  (e) resistors;
  (f) diodes

VARIABLE SPEED DRIVES, BREAD BAKING LINE, including breakers

CONTROL POWER DISTRIBUTION UNITS, SUBSEA COMPRESSION STATION, 
having ALL of the following:
  (a) input voltage NOT greater than 400 V AC;
  (b) length NOT less than 5.5 m;
  (c) height NOT less than 10 m

INTERFACE UNITS, TWO-WAY COMMUNICATION MODULES, remote operation

CONTROL AND MONITOR UNITS, trailer, electric, having ALL of the 
following:
  (a) buttons;
  (b) electric on-board display unit
With OR without ANY of the following;
          (i) adaptor for cable;
         (ii) battery;
        (iii) bracket;
         (iv) cable with socket;
          (v) covers

SWITCHING APPARATUS, EXCAVATOR AND/OR OFF-ROAD DUMP TRUCK, being 
ANY of the following:
  (a) switch box;
  (b) control box; 
  (c) switch gear

TRAIN CONTROL UNIT, electrical, voltage NOT greater than 
1 000 V, including ALL of the following:
  (a) central processing units; 
  (b) power supply units;
  (c) ethernet switches

POWER AND COMMUNICATIONS UNIT, SUBSEA, with OR without 
transformer, including ALL of the following:
  (a) pin AND socket connections;
  (b) dielectric fluid compensator;
  (c) electronic module;
  (d) lifting AND/OR handling grabs;
  (e) input voltage NOT exceeding 622 VAC

POWER AND COMMUNICATIONS DISTRIBUTION UNITS, SUBSEA, including 
ALL of the following: 
  (a) transformer enclosure module NOT greater than 600 V; 
  (b) back up communications module; 
  (c) communications electronics module; 
  (d) lifting mandrel; 
  (e) orientation pin; 
  (f) connectors; 
  (g) location mechanisms; 
  (h) earth bonding

DC SWITCHGEARS, RAILWAY, including ALL of the following:
  (a) rectifier;
  (b) feeder breakers;
  (c) shorting switch panel

POWER AND COMMUNICATIONS INTERFACE UNITS, SUBSEA, including ALL 
of the following:
  (a) communications electronics module;
  (b) transformer enclosure module NOT greater than 1 005 V;
  (c) power distribution AND protection modules;
  (d) electrical AND optical connectors;
  (e) lifting mandrel;
  (f) fibre optic link;
  (g) oil fill AND/OR level indicator;
  (h) ROV grabrail;
  (i) protective caps;
  (h) height NOT greater than 1 868 mm

INTERFACE AND CONTROL SYSTEM, SILO WEIGHING AND FILLING, 
programmable logic controlled, having ALL of the following:
  (a) interface modules;
  (b) measurement amplifiers;
  (c) weighing sensors;
  (d) external monitors

ELECTRICAL CABINETS, CALCINING PLANT, programmable logic 
controlled, whether OR not assembled, having ALL of the 
following:
  (a) lighting;
  (b) transformers;
  (c) multimetre;
  (d) isolators AND switchgear;
  (e) control gear;
  (f) cable compartment;
  (g) ventilation system;
  (h) sockets;
  (i) field instrument input AND output cards;
  (j) variable speed drives

CRANE CONTROLLER SYSTEMS, having ALL of the following:
  (a) programmable logic controller;
  (b) dc/ac converter;
  (c) dc/dc converter;
  (d) frequency inverter;
  (e) externally mounted air cooled braking resistors;
  (f) engineering workstation with computers

CONTROL CABINS, DRILLING RIG, air conditioned AND heated, 
including ALL of the following:
  (a) touch screen monitor;
  (b) power unit 480 V/60 HZ;
  (c) connection cables;
  (d) data logger;
  (e) length NOT less than 20 ft;
  (f) width NOT less than 8 ft;
  (g) height NOT less than 8 ft

PANELS, AVIATION AUDIO, having Bluetooth

CONTROL SYSTEMS, RECYCLING PLANT, programmable logic controlled, 
having ALL of the following:
  (a) cable trays;
  (b) power AND control cables;
  (c) secondary power control;
  (d) emergency stop system AND cut-off switches

CONTROL CABINETS, WIND TURBINE, programmable logic controlled, 
NOT greater than 400 V, having ALL of the following:
  (a) mains AND auxiliary power supply distributor;
  (b) emergency stop;
  (c) fire alarm;
  (d) uninterruptible power supply;
  (e) heater;
  (f) fan control

ELECTRICAL CONSOLE UNIT, TESTING STAND, including ALL of the 
following: 
  (a) electrical wiring;
  (b) junction box;
  (c) cables;
  (d) mounting base;
  (e) electrical connectors;
  (f) grounding couplers

CONTROLLERS, ELECTRIC COOKING OVEN

CONTROL RACK OR PANEL, IGNITION FLARE, OIL AND/OR GAS, having 
ALL of the following: 
  (a) weather shield; 
  (b) fasteners; 
  (c) frame; 
  (d) circuit breakers; 
  (e) relays; 
  (f) sockets; 
  (g) contact blocks; 
  (h) switches; 
  (i) indicator lights; 
  (j) electric ignitors; 
  (k) terminal blocks; 
  (l) wiring; 
  (m) breather; 
  (n) fuses; 
  (o) thermocouples; 
  (p) transducers; 
  (q) connectors; 
  (r) power unit supply;
  (s) rails;
  (t) gland plates;
  (u) enclosure

FUSEBOARDS AND/OR FUSE PANELS, indoor OR outdoor, with OR 
without fuseway, including ALL of the following:
  (a) working voltage of NOT greater than 415 V AC;
  (b) switch disconnector AND/OR circuit breaker;
  (c) phase busbar rating NOT greater than 4 200 A

FUSEBOARDS, switched AND insulated fusegear, indoor OR outdoor, 
having ALL of the following:
  (a) low voltage distributor protection NOT exceeding 3 200 A;
  (b) working voltage of 415 V AC;
  (c) busbar system;
  (d) fuse carriers;
  (e) switch disconnector;
  (f) disconnector operating handle;
  (g) with OR without fuseway

CONTROL PANELS, GLASSHOUSE PLANT GROWING SYSTEM, including ALL 
of the following:
  (a) interface;
  (b) plant management module;
  (c) wireless connectivity AND/OR LAN connectivity

SWITCH CONTROL AND MONITORING ENCLOSURES, WINDFARM, including 
ALL of the following:
  (a) supervisory control and data acquisition system, having 
      BOTH of the following:
          (i) auxiliary device connectivity;
         (ii) web based user interface AND/OR screens,
  (b) uninterruptible power supply;
  (c) ethernet connection

CONTROL CABINETS, MASONRY PRODUCT MANUFACTURING AND/OR 
PROCESSING PLANT, programmable logic controlled, including ALL 
of the following:
  (a) main AND/OR network switches;
  (b) fuses AND/OR motor starters;
  (c) lights;
  (d) power sockets;
  (e) contactors;
  (f) control voltage NOT less than 24 V DC;
  (g) input AND/OR output modules having EITHER of the
      following:
            (i) configuration lock;
           (ii) status measurement AND/OR display,               
  (h) terminal strips;
  (i) circuit breakers;
  (j) rated voltage NOT greater than 420 V AC,
with OR without ANY of the following:
            (i) soft starters;
           (ii) valve controllers;
          (iii) brake resistors;
           (iv) air conditioning;
            (v) emergency stop buttons;
           (vi) frequency inverters;
          (vii) dividers;
         (viii) transformers

ELECTRICAL CONTROL AND/OR PROTECTION SYSTEM, HIGH VOLTAGE DIRECT 
CURRENT (HVDC), being ANY of the following:
  (a) reactor cooling AND protection system including ALL of the
      following:
          (i) input AND/OR output racks;
         (ii) indicator panel,
  (b) AC control AND protection system including ALL of the
      following:
          (I) input AND/OR output rack;
         (ii) calculator AND/OR computer,
  (c) remote control interface system including ALL of the
      following:
          (i) input AND/OR output rack;
         (ii) indicator panel;
        (iii) programmable bridge unit

CARTS, STORAGE AND CHARGING, PORTABLE COMPUTER AND/OR TABLET, 
lockable, including ALL of the following:
  (a) NOT less than 20 charging slots;
  (b) ethernet connection;
  (c) auxiliary outlets

CONTROL AND POWER SUPPLY SYSTEMS, WAREHOUSE STORAGE AND 
RETRIEVAL, including ALL of the following: 
  (a) cabinet temperature control system;
  (b) digital input AND output modules;
  (c) ethernet uplink connections;
  (d) programmable logic controllers;
  (e) power rail distribution system

POWER AND COMMUNICATION UNITS, OIL AND GAS WELL, SURFACE AND/OR 
SUBSEA, including ALL of the following:
  (a) cabinet housing;
  (b) human machine interface;
  (c) server;
  (d) network switch;
  (e) cooling fan;
  (f) subsea communication module,
with OR without transformers AND/OR subsea output modules

DISPLAY AND CONTROL UNIT, PASSENGER MOTOR VEHICLE, incorporating 
a touchscreen

CONTROL CABS, COIL TUBING, skid mounted, having ALL of 
the following:
  (a) aluminium panels;
  (b) skylight window;
  (c) roof vent;
  (d) fans; 
  (e) hydraulic scissor lift; 
  (f) catwalk;
  (g) stairs;
  (h) flip up bench seats;
  (i) roof mounted air conditioner; 
  (j) interior AND exterior lights;
  (k) power inverter NOT greater than 1 500 watt; 
  (l) interior AND exterior operator controls;
  (m) gauges

EXPLOSION DETECTION AND SUPPRESSION ACTIVATION SYSTEM, 
programmable logic controlled, having ANY two OR more of the 
following:
  (a) detection sensors with OR without infrared flame detectors;
  (b) suppressors;
  (c) isolation valves;
  (d) control panel;
  (e) electric current isolators

CONTROL MODULES, having ALL of the following:
  (a) microchips;
  (b) relays;
  (c) capacitors;
  (d) resistors;
  (e) power supplies

ELECTRICAL CONTROL AND/OR PROTECTION SYSTEM, HIGH VOLTAGE DIRECT 
CURRENT (HVDC) LINK, including ALL of the following:
  (a) station control AND/OR monitoring system, including ALL 
      of the following:
              (i) clock;
             (ii) switches;
            (iii) operator's station OR cubicle,
  (b) cooling control AND/OR protection system including BOTH 
      of the following: 
              (i) input/output racks;
             (ii) indicator panel,
  (c) pole control AND/OR protection system, including ALL 
      of the following:
              (i) calculator AND/OR computer;
             (ii) input/output racks;
            (iii) indicator panel

CONTROL PANEL, COMPRESSOR GAS SUPPLY, GAS TURBINE, programmable 
logic controlled, including ALL of the following:
  (a) central processing module;
  (b) input AND/OR output modules;
  (c) power supply;
  (d) communication module;
  (e) channel isolated input AND/OR output modules;
  (f) over speed AND/OR vibration modules;
  (g) touch screen;
  (h) keyboard with integrated touchpad

ELECTRICAL CONTROL CABIN, PHOSPHATE BENEFICIATION PLANT, 
programmable logic controlled, including ALL of the following:
  (a) control station AND control panel;
  (b) lights AND power socket;
  (c) smoke detectors;
  (d) air conditioning

MOTOR CONTROL MODULE, WASHING MACHINE

CONTROL MODULES, REFRIGERATOR

CONTROLLERS AND/OR CONTROL PANELS AND/OR CONTROL BOARDS, ARC 
AND/OR PLASMA WELDERS AND/OR CUTTERS,  with mounted printed 
circuit boards

EXTRUSION BLOW MOULDING UTILITY MODULES, containerised, with OR 
without inverter, having ALL of the following:
  (a) air compressor;
  (b) electrical cabinets;
  (c) water chiller unit;
  (d) water tank AND pumps;
  (e) filters;
  (f) lighting;
  (g) access ladder AND catwalk

TRACKER CONTROL BOX, SOLAR PANELS, self-powered OR grid-powered, 
having ALL of the following:
  (a) hybrid communication;
  (b) over-angle detector;
  (c) temperature sensor

CONTROLLERS, BUILDING SWITCH, remotely controlled OR programmed, 
having ALL of the following:
  (a) maximum voltage NOT less than 24 V DC;
  (b) maximum power consumption NOT greater than 2 W;
  (c) internet connector;
  (d) connection capacity NOT greater than 6 ports

CONTROLLERS, CIRCUIT BREAKERS, automated, having ALL of the 
following:
  (a) voltage NOT less than 110 V and NOT greater than
      440 V;
  (b) thermal current of 8 amps;
  (c) ingress protection complying with British Standard 
      BS EN 60529:1992+A2:2013, being ALL of the following, 
          (i) IP20 for the connectors;
         (ii) IP40 for the front;  
        (iii) IP20 for the sides

CONTROL PANELS, SPARK DETECTION AND SUPPRESSION

EXPLOSION DETECTION AND SUPPRESSION ACTIVATION SYSTEM, 
programmable logic controlled, with OR without electric current 
isolators,  consisting of ALL of the following:
  (a) explosion detection sensors with OR without infrared 
      flame detectors;
  (b) explosion suppressors;
  (c) explosion isolation valves; 
  (d) control panel

CABINETS, electrical, having ALL of the following: 
  (a) ethernet control automation technology inlet AND/OR outlet
      module;
  (b) power distribution box;
  (c) servo drives

OVERHEAD CRANE CONTROLLERS, enclosed, programmable logic 
controlled, including ALL of the following:
  (a) DC/AC converters;
  (b) DC/DC converters;
  (c) frequency inverters;
  (d) externally mounted air cooled braking resistors;
  (e) engineering workstation with computer;
  (f) wireless access points;
  (g) air conditioner

CONTROL CABINETS, CONCRETE PANEL MANUFACTURING PLANT, 
programmable logic controlled, having ALL of the following:
  (a) main switch;
  (b) fuses;
  (c) air conditioning;
  (d) lighting;
  (e) power sockets;
  (f) frequency inverters;
  (g) contactors;
  (h) 24 V power supplies;
  (i) network switches;
  (j) remote input AND output modules;
  (k) terminal strips;
  (l) circuit breakers;
  (m) 24 V dividers;
  (n) transformers;
  (o) power analysis hardware;
  (p) stop button switches,
with OR without ANY of the following:
           (i) soft starters;
          (ii) valve controllers;
         (iii) brake resistors

LIGHT CONTROLLERS, flush OR rail adapter mounting, having ALL of 
the following:
  (a) input voltage NOT greater than 265 VAC;
  (b) one OR more LED; 
  (c) power loss NOT greater than 6 W;
  (d) protection IP20 OR IP54

MAIN CONTROL CABINETS, CONCRETE PANEL MANUFACTURING PLANT,
having ALL of the following:
  (a) switches;
  (b) fuses;
  (c) air conditioning;
  (d) lighting;
  (e) power sockets;
  (f) frequency inverters;
  (g) contactors;
  (h) 24V power supplies;
  (i) network switches;
  (j) programmable logic controller;
  (k) remote input AND/OR output unit;
  (l) terminal strips;
  (m) circuit breakers;
  (n) 24V dividers;
  (o) transformers;
  (p) power analysis units,
with OR without ANY of the following:
          (i) soft starters;
         (ii) valve controllers;
        (iii) brake resistors

CONTROL PANELS, CO-GENERATION BOILER, 
having ALL of the following:
  (a) programmable logic controller;
  (b) safety instrument system;
  (c) human machine interface

POWER MANAGEMENT DISTRIBUTION UNITS, having BOTH of the 
following: 
  (a) programmable logic controller; 
  (b) ethernet interface

CONTROLLERS, TRACTION CONVERTER, TRAIN

LIGHTING CONTROLLERS, WIRELESS, having ALL of the following:
  (a) switch;
  (b) surge protector;
  (c) dimmer;
  (d) electricity meter;
  (e) radio communication;
  (f) micro-controller,
with OR without EITHER of the following:
         (i) GPS module;
        (ii) motion AND/OR light sensor

CONTROL UNITS, single phase OR multiphase motor starter 
protection having ALL of the following:
  (a) thermal protection NOT less than 0.15 A and NOT greater 
      than 32 A;
  (b) in-built surge protection;
  (c) control circuit voltage 24 AC OR DC;
  (d) thermal overload class frequency NOT less than 40 Hz and 
      NOT greater than 60 Hz;
  (e) internet connectivity;
  (f) earth fault protection;
  (g) manual OR remote OR automatic reset
with OR without multifunction remote programmable control

CABINETS, ELECTRICAL CONTROL, having an input voltage NOT 
greater than 420 V, including NOT less than five of the 
following:
  (a) control consoles;
  (b) relays;
  (c) power supplies;
  (d) terminals;
  (e) fuses;
  (f) circuit breakers;
  (g) remote messaging input AND/OR output controls;
  (h) frequency converters;
  (i) programmable controllers;
  (j) electrical drivers;
  (k) decoders;
  (l) pilots;
  (m) fans;
  (n) panels;
  (o) hubs;
  (p) transformers

MODULAR REMOTE POWER PANEL, having ALL of the following:
  (a) NOT greater than 72 poles of 3 phase power;
  (b) distribution load NOT greater than 277 kW;
  (c) nominal Voltage NOT less than 230 V and NOT greater than 
      400 V;   
  (d) input frequency NOT less than 50 Hz and NOT greater than 
      60 Hz;
  (e) current capacity NOT greater than 400 A

MOTOR STARTERS, enclosed, push-button controlled, having ALL of 
the following:
  (a) contactor;
  (b) current carrying capacity NOT greater than 35 A;
  (c) voltage carrying capacity NOT greater than 440 VAC;
  (d) operational ambient temperature NOT less than -5 degrees
      Celsius and NOT greater than  +40 degrees Celsius;
  (e) polycarbonate OR sheet steel OR acrylonitrile butadiene
      styrene (ABS) enclosure;
  (f) enclosure protection complying with British Standard
      BS EN 60529:1992+A2:2013, IP65

ELECTRICAL CONTROL PANEL, IRON ORE PROCESSING PLANT, 
programmable logic controller, having a human machine interface

CONTROLLERS, VEHICLE ELECTRICAL POWER MANAGEMENT, programmable 
logic controlled

CONTROLLERS, ELECTRIC CIRCUIT, being EITHER of the following:
  (a) trackerball switches;
  (b) hand grip switches, including ANY of the following:
        (i) buttons;
       (ii) levers;
      (iii) keypads

JOYSTICKS AND/OR PADDLE CONTROLLERS, electric powered