Tariff Concession Orders

GLASS, cathedral, coloured, in sizes NOT exceeding 1 270 mm x
 940 mm

GLASS, rolled

GLASS, rolled

GLASS, rolled

FLOAT GLASS, annealed or toughened, non reflective (i.e with a
 visible light reflectance less than 0.5% on one or both sides), in
 sheets

GLASS, having a thickness of NOT less than 13.5 mm

GLASS, x-ray, protective

FLOAT GLASS, AUTOMOTIVE, green tinted

GLASS, having a thickness of NOT less than 13.5 mm

FLOAT GLASS, clear, iron content equal to or less than 0.02 per cent
 in sheets, non-wired, without an absorbent or reflecting layer,
 not being cast, rolled, drawn or blown glass

PANELS, GLASS CERAMIC, capable of withstanding 850 degrees C,
 expansion coefficient of 0 plus or minus 0.1 x 10 to the power of -6
 K to the power of -1

GLASS SIDES, DRAWER, clear OR frosted, rectangular

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more
   For the purposes of TC 8533474 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being toughened (tempered) safety glass windscreens
 and windows

WINDSHIELDS, POWER BOAT, toughened safety glass, framed or not
 framed being ANY of the following:
   (a) curved, having a surface area NOT exceeding 8 000 sq cm;
   (b) quadrilateral, having a surface area NOT exceeding
       3 500 sq cm;
   (c) triangular, having a surface area NOT exceeding 4 000 sq cm

GLASS, borosilicate, 2 h fire resistance rated, complying
 with AS 1530, Part 4, 1985

GLASS, having a thickness of NOT less than 13.5 mm

SETS, PHONE OR TABLET ACCESSORIES, consisting of tempered glass 
screen protectors AND including NOT less than one of the 
following:
  (a) alcohol swabs;
  (b) cleaning cloths;
  (c) screen smoothing cards;    
  (d) stickers;
  (e) cleaning tape

GLASS, U-profile, tempered

PANELS, SOLAR GLASS, toughened (tempered) to 
Australian Standard/New Zealand Standard 2208 (AS/NZS 2208), 
having ALL of the following:
  (a) thickness of 3.2 mm +/- 0.1 mm;
  (b) solar energy transmittance (Te) NOT less than 91%;
  (c) iron content (Ferric Oxide Fe2O3) NOT greater than 0.01%

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years
 before the goods are entered for home consumption, or reproductions
 of these parts, being laminated safety glass windows and windscreens

GLASS, LAMINATED, having ALL the following:
  (a) outer sheet NOT greater than 8 mm;
  (b) mesh centre sheet being 6010 grade aluminium;
  (c) polyvinyl butyral (PVB) interlayer

GLASS PLATE, multi-laminated, clear, having ALL of the following:
  (a) plate size NOT less than 6 m2;
  (b) comprising multiple layers of annealed glass;
  (c) layers separated by waterglass
with OR without an interlayer of either polyvinyl butyral (PVB) 
or ethylene-vinyl acetate (EVA)

INSULATING GLASS, triple panelled, electrically wired, sealed,
 composed of ALL of the following:
   (a) one layer of single sheet float glass, toughened, metal
       oxide coated for electrical conductivity;
   (b) one layer of single sheet float glass, metal oxide coated
       for heat reflectivity;
   (c) one layer single sheet toughened float glass

GLASS, insulating, electrically wired, sealed, 2 panel, comprising
 ALL of the following:
   (a) one layer of single sheet float glass, toughened, metal oxide
       coated for electrical conductivity;
   (b) one layer of single sheet float glass, toughened, metal oxide
       coated for heat reflectivity

MIRRORS, CONVEX, having ALL of the following:
   (a) chrome reflecting backing on the convex side;
   (b) radius of convexivity NOT less than 1 000 mm;
   (c) reflectance value of NOT less than 35%;
   (d) average radius of curvature NOT deviating by more than 15%
       when measured according to procedures specified in Australian
       Design Rule 14.01 Appendix A

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more
   For the purposes of TC 8533475 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

MIRRORS, towing, motor vehicle

REAR VIEW MIRRORS, EARTHMOVING MACHINE OR HYDRAULIC EXCAVATOR 
OR OFF-HIGHWAY MINING AND/OR DUMP TRUCK, internal OR external, 
whether OR not electrically heated, having ANY of the following:
  (a) clips;
  (b) clamps;
  (c) brackets

GLASS MIRRORS, having ALL of the following:
  (a) European Standard EN 572-1 characteristic bending strength 
      NOT less than 45 MPa;
  (b) external reflectivity NOT less than 93%;
  (c) layered paint AND silver AND copper backing

GLASS PLATES, MIRRORED, having a thickness less than 1.3 mm

MIRRORS, vanity, double-sided, illuminated

MIRRORS, vanity, single sided, illuminated

MIRRORS, folding

INSPECTION AND SEARCH MIRRORS, having BOTH of the following:
  (a) framed mirror;
  (b) telescopic arm

MIRRORS, TABLE TOP, having frames of ANY of the following:
  (a) plastics;
  (b) rubber;
  (c) ceramics;
  (d) china;
  (e) porcelain;
  (f) glass;
  (g) textiles;
  (h) base metals

MIRRORS, WALL, having frames of ANY of the following:
  (a) plastics;
  (b) rubber;
  (c) ceramics;
  (d) china;
  (e) porcelain;
  (f) glass;
  (g) textiles;
  (h) base metals

PHIALS (VIALS), glass

CONTAINERS, glass, amber or white, having ALL of the following:
   (a) nominal volumetric capacity 10 ml;
   (b) neck diameter 18 mm + or - 0.3 mm;
   (c) thread diameter 20 mm + or - 0.2 mm;
   (d) outside body diameter 25 mm + or - 0.5 mm

DRINKING GLASSES

STEMWARE, cut, comprising less than 0.05% lead, having the
 appearance and characteristics of lead crystal but NOT including
 crystal glassware falling within category numbers 3 and 4 Annex 1 of
 BS 3828: February 1973

DRINKING GLASSES

MUGS, MICROWAVE AND OVEN, 300 ml capacity, hand cut, transparent
 glass

SETS, BAR GLASSWARE, comprising BOTH of the following:   
     (a) cocktail shakers;                                 
     (b) drinking glasses

MILK FROTHERS, manual, having BOTH of the following:
  (a) glass container;
  (b) plastic lid, incorporating a stainless steel frothing disc

GLASSWARE, borosilicate, with or without borosilicate glass lids 
or plastic lids, being ANY of the following:
  (a) dishes;
  (b) bowls;
  (c) jugs

GLASSWARE, borosilicate, with or without polypropylene 
lids, being ANY of the following:
  (a) dishes;
  (b) bowls;
  (c) jugs

GLASSWARE, TEA OR COFFEE MAKING, being ANY of the following types:
   (a) infuser;
   (b) plunger press;
   (c) filter;
   (d) strainer

JARS OR CONTAINERS, COFFEE INFUSER, borosilicate glass

DINNER SETS, having ALL of the following:
  (a) plates;
  (b) laminated glass bowls;
  (c) mugs

SETS, GLASSWARE, consisting of BOTH the following:
  (a) water bottles;
  (b) drinking glasses

BEVERAGE DISPENSERS, glass, incorporating a tap, with OR without 
EITHER of the following:
  (a) metal stand;
  (b) metal OR glass lid

CAKE STANDS, glass, having EITHER of the following: 
  (a) pedestal base; 
  (b) dome cover

DISPENSERS, CONDIMENT

SALT AND PEPPER SHAKERS, glass, having stainless steel tops

CARAFES, glass

COVERS, HOB

MUGS OR TANKARDS, drinking

GLASSWARE, TEA OR COFFEE MAKING, being ANY of the following:
   (a) infuser;
   (b) plunger press;
   (c) filter;
   (d) strainer

GLASSWARE, WINE SET, comprising a decanter and drinking glasses

GLASSWARE, WATER SET, comprising a jug and drinking glasses

GLASSWARE, being ANY of the following:
   (a) jugs;
   (b) dishes;
   (c) bowls;
   (d) ice buckets;
   (e) wine coolers;
   (f) trays;
   (g) decanters;
   (h) jars;
   (i) cocktail shakers;
   (j) cocktail mixers;
   (k) plates;

INFUSERS, COFFEE

CAKE STANDS, two piece, comprising BOTH of the following:
   (a) pedestal base;
   (b) dome cover

LIQUOR SETS, gift boxed, comprising ALL of the following:
   (a) ice bucket;
   (b) two or more liquor glasses;
   (c) gift box depicting the liquor set

DECANTER SETS, liquor, gift boxed, comprising ALL of the following:
   (a) decanter, incorporating a glass stopper;
   (b) two or more liquor glasses;
   (c) gift box depicting the decanter set

COASTERS, GLASS

BOTTLES, baby, calibrated to either 120 ml or 240 ml

FISH BOWLS, glass

PLAQUES, mirrored glass, bevelled edges, printed, with OR 
without photo frames

VASES OR ASHTRAYS, glass

MIRROR BALLS

BLOCKS, GLASS, having images inside the glass

PARTS FOR VEHICLES, being original equipment or reproductions of
 goods fitted as original equipment to vehicles having BOTH of
 the following characteristics:
   (a) if imported, would fall within Chapter 87 of the Customs
       Tariff Act 1987;
   (b) manufactured prior to 1962

PARTS FOR VEHICLES which, if imported, would fall within Chapter
 87 of the Customs Tariff Act 1987, being parts which are 30 years
 old or more
   For the purposes of TC 8533476 it is the importer"s
   responsibility to establish that the parts were manufactured
   30 years or more prior to the date of importation

PIPETTES, but NOT including EITHER of the following:
   (a) pasteur pipettes, being pipettes having a body which is
       tapered or rounded at the bottom end and drawn into a
       long thin tip;
   (b) ESR pipettes, being pipettes designed for use in
       apparatus for the determination of erythrocyte
       sedimentation rate

LABORATORY GLASSWARE, HYGIENIC OR PHARMACEUTICAL, being ANY of
 the following:
   (a) beakers and covers therefor;
   (b) bottles, but NOT including ANY of the following:
         (i) bottles with a maximum capacity less than 70 mL;
        (ii) Dreschel gas wash bottles;
   (c) boxes and lids therefor;
   (d) cones, sedimentation;
   (e) crucibles and lids therefor;
   (f) cylinders, being EITHER of the following:
         (i) measuring;
        (ii) mixing;
   (g) desiccators and lids therefor;
   (h) discs, sintered;
   (i) dishes;
   (j) filters, being ANY of the following:
         (i) Allihn;
        (ii) candle;
       (iii) crucible;
        (iv) disc;
         (v) immersion;
        (vi) pipeline;
   (k) flasks, being ANY of the following:
         (i) culture;
        (ii) depositing;
       (iii) Erlenmeyer, but NOT having ground glass joints;
        (iv) Fernbach;
         (v) filtration, but NOT having ground glass joints;
        (vi) flat bottom, but NOT having ground glass joints;
       (vii) Kohlrausch, but NOT having ground glass joints;
      (viii) Kolle;
        (ix) penicillin;
         (x) round bottom, but NOT having ground glass joints;
        (xi) Roux;
       (xii) sugar;
      (xiii) volumetric;
   (l) ribbed funnels;
   (m) jars, but NOT including cloud jars or pour point jars;
   (n) joints and sockets, ground glass finish;
   (o) lamps, spirit;
   (p) mortars and pestles;
   (q) pneumatic tanks and troughs;
   (r) slides, microscopic;
   (s) staining blocks and trays;
   (t) stopcocks, draincocks, taps or valves with ground finish,
       including keys, barrels and other parts therefor;
   (u) stoppers;
   (v) triangles;
   (w) tubes, capillary;
   (x) vessels, being EITHER of the following:
         (i) bloom test;
        (ii) buttress, end ground;
   (y) watch glasses

LABORATORY GLASSWARE, HYGIENIC OR PHARMACEUTICAL, being ANY of
 the following:
   (a) beakers and covers therefor;
   (b) bottles, but NOT including ANY of the following:
         (i) bottles with a maximum capacity less than 70 mL;
        (ii) Dreschel gas wash bottles;
   (c) boxes and lids therefor;
   (d) cones, sedimentation;
   (e) crucibles and lids therefor;
   (f) cylinders, being EITHER of the following:
         (i) measuring;
        (ii) mixing;
   (g) desiccators and lids therefor;
   (h) discs, sintered;
   (i) dishes;
   (j) filters, being ANY of the following:
         (i) Allihn;
        (ii) candle;
       (iii) crucible;
        (iv) disc;
         (v) immersion;
        (vi) pipeline;
   (k) flasks, being ANY of the following:
         (i) culture;
        (ii) depositing;
       (iii) Erlenmeyer, but NOT having ground glass joints;
        (iv) Fernbach;
         (v) filtration, but NOT having ground glass joints;
        (vi) flat bottom, but NOT having ground glass joints;
       (vii) Kohlrausch, but NOT having ground glass joints;
      (viii) Kolle;
        (ix) penicillin;
         (x) round bottom, but NOT having ground glass joints;
        (xi) Roux;
       (xii) sugar;
      (xiii) volumetric;
   (l) ribbed funnels;
   (m) jars, but NOT including cloud jars or pour point jars;
   (n) joints and sockets, ground glass finish;
   (o) lamps, spirit;
   (p) mortars and pestles;
   (q) pneumatic tanks and troughs;
   (r) slides, microscopic;
   (s) staining blocks and trays;
   (t) stopcocks, draincocks, taps or valves with ground finish,
       including keys, barrels and other parts therefor;
   (u) stoppers;
   (v) triangles;
   (w) tubes, capillary;
   (x) vessels, being EITHER of the following:
         (i) bloom test;
        (ii) buttress, end ground;
   (y) watch glasses

MICROSCOPE SLIDES, with or without cover slips

TUBES, culture, soda glass, rimless, disposable, having a wall
 thickness less than 1.00 mm

PIPETTES, pasteur, length NOT exceeding 230 mm, in sizes 1.10 mm
 to 2.00 mm (both inclusive)

COVER SLIPS, MICROSCOPE SLIDE

PIPETTES, PASTEUR, glass, with OR without bulb, having BOTH of 
the following:
  (a) tip opening NOT greater than 1.1 mm;
  (b) length NOT greater than 230 mm

GLASS GRAINS, spherical, having ALL of the following:
   (a) a specific gravity of 2.46;
   (b) a refractive index of 1.52;
   (c) a size range of 60 microns or less

MICROSPHERES, OIL AND GAS DRILLING, glass, hollow

GLASS FIBRES, being chopped strands, length NOT exceeding 50 mm

ROVINGS, GLASS FIBRE

GLASS FIBRES, being ANY of the following:
   (a) slivers;
   (b) yarns;
   (c) chopped strands, of a length exceeding 50 mm

YARN, E GLASS FIBRE, continuous filament

MATS, GLASS FIBRE, nonwoven

CONTINUOUS FILAMENT MAT, being multiple layers of continuous
 glass fibre strands randomly deposited in a swirl-like pattern
 which are bonded together to give a uniform multi-directional
 reinforcing material, having BOTH of the following:
   (a) a grammage of 150 g/sq m or greater;
   (b) a width of 381 mm or greater

BOARDS, glass fibre, having ALL of the following:
  (a) silica content NOT greater than 60% by weight;
  (b) alkaline oxide content NOT less than 5% by weight;
  (c) acrylic coatings

TILES, HIGH DENSITY GLASS WOOL, acoustic

SCRIM, fibreglass, non-woven

TAPE, GLASS FIBRE, WOVEN, reinforced on one side or both sides 
with poly dimethly siloxane compound, self adhesive

SCRIM, fibreglass

MESH, INSECT, being woven PVC coated glass fibre

FABRIC, fibreglass, plain weave, coated, having ALL of the 
following:
  (a) airflow resistivity NOT less than 80 (Meter-Kilogram-
      Second) MKS Rayls and NOT greater than 3 000 MKS Rayls;
  (b) weight NOT less than 20 gsm and NOT greater than 250 gsm;
  (c) sound absorption complying with Australian Standard
      ISO 354-2006 6.1.4 (AS ISO 354-2006 6.1.4);
  (d) filaments per single yarn NOT greater than 136 tex;
  (e) width greater than 30 cm

FABRIC, SUNSCREEN, woven fibreglass, varnish coated, one side 
metalized, having ALL of the following:
  (a) weight NOT less than 152 gsm and NOT greater than 168 
      gsm;   
  (b) width NOT less than 2.3 m and NOT greater than 2.5 m;
  (c) thickness NOT less than 0.199 mm and NOT greater than
      0.222 mm

SCRIM, fibreglass

MESH, INSECT, being woven PVC coated glass fibre

FABRIC, glass fibre, coated with polytetrafluoroethylene, weight
 NOT exceeding 950 g/sq m

FABRIC, woven glass fibre cloth, electrical insulating, imported
 in rolls of a width NOT less than 1 220 mm AND a length of NOT
 less than 1 000 m, coated one side with a thermosetting adhesive
 being ONE of the following:
   (a) rubber based;
   (b) acrylic based;
   (c) silicon based

FABRIC, woven glass fibre, stainless steel reinforced, having 
ALL of the following:
  (a) coated AND/OR impregnated silicone rubber AND coloured
      pigment; 
  (b) width NOT less than 1 200 mm and NOT greater than 1 300 mm;
  (c) total coated OR impregnated fabric weight NOT less than
      1 010 gsm and NOT greater than 1 100 gsm

FABRIC, glass fibre, coated with polytetrafluoroethylene, weight
 NOT exceeding 950 g/sq m

PRE-PREG, being woven glass fibre stiffener material pre-impregnated
 with an adhesive preparation

INSULATION, being loose bulk glass wool fibres having a 
temperature classification GREATER than 1 000 degrees Celsius

INSULATION, being glass wool fibres having a temperature 
classification GREATER than 1 000 degrees Celsius, in ANY of 
the following forms:
  (a) blankets;
  (b) boards;
  (c) paper;
  (d) felt sheets

INSULATING BOARDS, GLASS WOOL FIBRE, having a board thickness 
greater than 5 mm

SCRIM, fibreglass

TILES, HIGH DENSITY GLASS WOOL, acoustic

FILTER MEDIA, GLASS FIBRE NEEDLE FELT

TEXTILES, amorphous silica, being glass fibre chemically leached,
 for application at temperatures exceeding 950 degrees C continuous
 operation, being ANY of the following:
   (a) rope;
   (b) braid;
   (c) sleeving

FILTER ELEMENTS, borosilicate glass microfibre, filtering to 99%
 efficiency at 0.1 microns

EAR PLUGS, disposable, being a "plug" of preformed glass fibres
 encased in a plastic film

ROPE LAGGINGS, glass fibre filled, NOT being square forms

INSULATION, FLEXIBLE HOSE AND CABLE, consisting of knitted or
 braided glass fibre coated with silicone rubber

FILTER ELEMENTS, glass fibre, having a particle filtering efficiency
 of one micron OR less

TAPE, ELECTRICAL INSULATING, glass yarn, laid parallel, NOT more
 than 50 mm wide, impregnated with B stage (semi-cured) thermosetting
 resin

GLASS FIBRE FABRIC, polyvinyl chloride (PVC) coated

BONDED COMPOSITE FABRIC, having ALL of the following:
  (a) polymer coated glass fibre grid;
  (b) spun bonded polyester fabric;
  (c) total weight exceeding 237 gsm and NOT exceeding 441 gsm

CONVEYOR BELTING, HEAT PRESS MACHINE, having ALL of the 
following:
  (a) woven fibreglass fabric layer;
  (b) polytetrafluoroethylene (PTFE) top AND bottom surfaces;
  (c) belt weight NOT greater than 1 050 g/m2;
  (d) belt thickness NOT greater than 0.3 mm

BLADES, STRIPPER, fibreglass, having a phenolic resin base

ROPES, REFRACTORY

INSULATING SLEEVE OR RIBBON, consisting of woven or knitted 
glass, fibre coated with silicone rubber

FIBREGLASS INSECT SCREENING

TAPE, FIBRE GLASS MESH, leno weave, dyed and self adhesive

FABRICS, GLASS FIBRE, WOVEN, having ALL of the following:
  (a) cut to a circular shape;
  (b) impregnated with phenolic resin;
  (c) size 51 mm or greater but NOT greater than 815 mm

FABRIC, being fibreglass scrim, chemically sized and bonded,
 having a width exceeding 150 mm and a weight less than 65 g/sq m

FABRIC, woven, amorphous silica, being glass fibre chemically
 leached for application at temperatures exceeding 600 degrees C
 continuous operation

FABRIC, woven glass fibre cloth, electrical insulating, imported in
 rolls of a width NOT less than 900 mm and a length of NOT less than
 45 m, coated one side with thermosetting adhesive, being silicone
 based

LAMINATE, GLASS FABRIC, having ALL of the following:
  (a) three dimensional, interstitial construction;
  (b) upper deck;
  (c) lower deck;
  (d) conjoining vertical pile threads;
  (e) silane sizing

TAPE, adhesive, glass fibre, coated with polytetrafluoroethylene

FABRIC, woven, amorphous silica, being glass fibre chemically
 leached for application at temperatures exceeding 600 degrees C
 continuous operation

BANDAGES, PIPE REPAIR, polyurethane resin pre-impregnated 
fibreglass

TAPE, GLASS FIBRE, WOVEN, reinforced on one side or both sides 
with poly dimethly siloxane compound, self adhesive

ROPES, REFRACTORY

INSULATING SLEEVE OR RIBBON, consisting of woven or knitted 
glass, fibre coated with silicone rubber

FIBREGLASS INSECT SCREENING

TAPE, FIBRE GLASS MESH, leno weave, dyed and self adhesive