Tariff Concession Orders

HOOF BOOTS, horseshoe, polyurethane, one piece, having a sole
 plate with a thickness NOT less than 10 mm and a flexible upper

CHAIN, butt welded and chrome plated, comprising ALL of the
 following:
   (a) a snap hook and welded ring attached to opposite ends;
   (b) in overall lengths NOT exceeding 110 cm
 but NOT including such goods when imported with handles of
 leather, PVC or any other material

DOG LEADS, automatic retractable, allowing control of dogs by its
 unwinding and recoiling function

CHECK/CHOKE CHAINS, for dogs

EQUINE SUPPORT BOOTS, being BOTH of the following:
  (a) elasticised fetlock joint supports;
  (b) nylon fabric fasteners

SWEATERS, DOG, knitted

COATS, CANINE, textile, constant pressure

COATS, DOG

DOG AND/OR CAT RESTRAINTS, being EITHER of the following:
  (a) leads;
  (b) harnesses

COLLARS, ANIMAL, with OR without bells

COATS, SHEEP, NYLON

SUITCASES, having NOT less than 2 non detachable wheels,
 having the following external dimensions:
   (a) length NOT less than 51 cm;
   (b) height NOT less than 36 cm;
   (c) width NOT less than 18 cm

BOARDING CASES, made of injection-moulded polypropylene, having two
 fixed wheels and an extendable trolly handle, dimensions of each
 case not to exceed 115 lineal centimeters in order to comply with
 international airline allowances on cabin baggage size

SUITCASES, having NOT less than 2 fixed non detachable type wheels,
 having EITHER of the following external dimensions:
   (a) NOT less than:
       (i) length 58cm;
      (ii) height 41cm;
     (iii) width 15cm, OR
   (b) (i) length 36.19cm;
      (ii) height 55.24cm;
     (iii) width 20.32cm

CASES, wheeled, having BOTH of the following: 
  (a) padded laptop compartment;
  (b) removable laptop pouch

ART CARRIERS, having a total thickness NOT greater 
than 65 mm, being ANY of the following:
  (a) portfolios;
  (b) bags;
  (c) carry cases;
  (d) satchels;
  (e) sleeves

SUITCASES, having an outer surface of textile OR plastic

BAGS, LAPTOP AND/OR TABLET COMPUTER, cotton canvas OR hemp 
canvas

CARRY CASES, COMPUTER AND COMPUTER PERIPHERALS having BOTH of 
the following:
(a) length NOT less than 400 mm; 
(b) height NOT less than 290 mm

CARRY CASES, LAPTOP OR NOTEBOOK COMPUTER OR PORTABLE PRINTER, 
non leather, having BOTH of the following:
(a) length NOT less than 400 mm; 
(b) height NOT less than 290 mm

CASES, MAKE-UP, having ALL of the following:
  (a) plastic coated fabric outer surface;
  (b) rectangular base;
  (c) carry handles;
  (d) plastic pull out drawers;
  (e) detachable shoulder strap

CASES, BICYCLE FRAME, STORAGE AND/OR TRANSPORT

VANITY OR BEAUTY OR COSMETIC CASES, having an outer surface of
 plastic OR textile sheeting

BAGS, polyester, having ALL of the following:
  (a) zipper closure;
  (b) rectangular base;
  (c) carry handles;
  (d) length NOT greater than 30 cm;
  (e) width NOT greater than 12 cm

WALLETS OR PURSES OR BILLFOLDS OR WALLET-PURSES, having an
 outer surface of leather

COVERS, ELECTRONIC READER

CASES AND/OR COVERS AND/OR SLEEVES, TABLET COMPUTER, whether OR 
not incorporating a stand

PROTECTION CASES, COMPUTER TABLET, composition leather

CASES, MOBILE PHONE

CARRY CASES, PALMTOP COMPUTER OR EXTERNAL COMPUTER DRIVE, leather

KEYCASES, with outer surface of plastic sheeting

PURSES - with outer surface of plastic sheeting

PURSES, outer surface of plastic sheeting or textile material

CASES, SUNGLASS OR SPECTACLE, with OR without the following:
  (a) cleaning cloth;
  (b) pouch

POUCHES, TOBACCO, gusseted

CASES, SPECTACLE

CASES, SUNGLASS

WALLETS, having an outer surface of textile fabric, incorporating
 a coin compartment with a closure, but NOT including travel
 wallets with a waist band

BILLFOLDS OR WALLETS OR WALLET-PURSES, having an outer surface of
 plastic sheeting

CASES, MOBILE TELEPHONE

MUSICAL INSTRUMENT CASES or BAGS, being EITHER of the following:
   (a) internal OR external design to fit a musical instrument;
   (b) internal OR external shape to fit a musical instrument

GARMENT BAGS, capable of extending to over 1 200 mm in length and
 having three or more seperate compartments

COMPENDIUM, LEATHER, with OR without ANY of the following:
  (a) writing pad;
  (b) ring binder;
  (c) calculator;
  (d) USB holder;
  (e) tablet cover

CASES AND/OR COVERS AND/OR SLEEVES, TABLET COMPUTER, whether OR 
not incorporating a stand

WAIST BAGS OR MONEY BELTS OR ZIPPERED POUCHES, having an
 outer surface of leather

PENCIL CASES

BAGS, GOLF

AUDIO BAGS AND ACCESSORIES, being ANY of the following:
   (a) compact disk wallets;
   (b) audio player belt bags;
   (c) compact disk cases;
   (d) audio player carry bags

INSTRUMENT CASES, acrylonitrile butadiene styrene plastic,
 incorporating internal guide slots

BOXES AND CASES, as follows:
   (a) acrylonitrile butadiene styrene, incorporating printed circuit
       board mounting slots, of the following sizes (+ or - 2 mm):
           (i) 55 mm x 55 mm x 42 mm;
          (ii) 75 mm x 50 mm x 27 mm;
         (iii) 85 mm x 56 mm x 40 mm;
          (iv) 100 mm x 50 mm x 40 mm;
           (v) 125 mm x 60 mm x 40 mm;
          (vi) 145 mm x 85 mm x 50 mm;
         (vii) 180 mm x 110 mm x 60 mm;
        (viii) 28 mm x 54 mm x 83 mm;
          (ix) 41 mm x 68 mm x 130 mm;
           (x) 50 mm x 90 mm x 150 mm;
          (xi) 60 mm x 113 mm x 196 mm;
         (xii) 155 mm x 65 mm x 160 mm;
    (b) acrylonitrile butadiene styrene, air vented on two sides of
        the size 95 mm x 45 mm x 145 mm;
    (c) moulded acrylonitrile butadiene styrene, and on a metal base
        of the size 155 mm x 65 mm x 160 mm

ROD CASES, fishing, cylindrical, lockable

CASES, cue

SUITER BAGS, external surface of textile or plastic

CARRY CASES, with tool holders and/or drawers, exterior material
 of vinyl fabric

MEDICINE BAGS, personal, plastic sheeting outer surface, various
 internal retaining fittings and a zipper closure

CASES, MUSICAL INSTRUMENT, having a hard shell of ANY of the 
following:
  (a) wood;
  (b) acrylonitrile butadiene styrene;
  (c) expanded polystyrene foam;
  (d) polycarbonate;
  (e) polyurethane

BAGS AND/OR CASES, PAINTBALL EQUIPMENT, being ANY of the 
following:
  (a) goggle cases;
  (b) marker cases;
  (c) loader cases;
  (d) barrel cases;
  (e) lens cases;
  (f) gear bags having compartments;
  (g) bottle AND/OR pressure vessel cases

CASES, PORTABLE COFFEE MAKER, having ALL of the following:
  (a) moulded body with ethylene-vinyl acetate covering;
  (b) fabric lining;
  (c) attachment loop;
  (d) zippered closure

BACKPACKS, HYDRATION, nylon outer, having all the following:
  (a) thermoplastic polyurethane (TPU) fluid reservoir;
  (b) capacity NOT less than 1.75 L and NOT greater than 8 L;
  (c) high density polyethylene (HDPE) AND silicone suction hose

BAGS, CARRY, NOT less than 65% jute, having ALL of the following:
  (a) sewn in handles;
  (b) hanging loop;
  (c) rectangular base

BAGS, SECURITY, having ALL of the following:
  (a) eyelets;
  (b) webbing strap;
  (c) nylon bag

COMPENDIUMS, with OR without ANY of the following:
  (a) writing pad;
  (b) calculator;
  (c) ring binders;
  (d) computer tablet holder;
  (e) pen loop;
  (f) business card holders;
  (g) document pockets

BELTS, WAIST, adjustable, incorporating a zipper closable pouch

TROLLEY BAGS, including ALL of the following:
  (a) textile outer surface;
  (b) fixed wheels;
  (c) retractable telescopic handles

BACKPACKS, wheeled, having ALL of the following:
  (a) textile outer surface;
  (b) corner mounted wheels;
  (d) retractable telescopic handles

DUFFLE BAGS, wheeled, having EITHER of the following:
  (a) retractable telescopic handles;
  (b) corner mounted wheels

CASES AND/OR COVERS AND/OR SLEEVES, PORTABLE COMPUTER, whether 
OR not incorporating a stand

BAGS, polyester, having ALL of the following:
  (a) zipper closures;
  (b) polyvinyl chloride OR thermoplastic polyurethane lid;
  (c) length NOT greater than 22 cm

BAGS, polyester, having ALL of the following:
  (a) zipper closures;
  (b) mesh zip pockets;
  (c) polyester fleece lining;
  (d) length NOT greater than 22 cm

CASES, PROTECTION, PORTABLE MEDIA PLAYER, silicone, 
incorporating a snap-on wristband

PROTECTIVE CASES, COMPUTER TABLET, having an outer surface of 
EITHER of the following:
  (a) canvas;
  (b) rubberised polyurethane leather

BAGS AND/OR SACKS, MOISTURE PROTECTION, having BOTH of the 
following:
  (a) welded AND/OR tape sealed seams;
  (b) roll top closures

BAGS, woven polypropylene strip, plastic coated, having ALL of 
the following:
  (a) zippered closure;
  (b) rectangular base;
  (c) carry handles;
  (d) bag weight NOT greater than 300 g

COVERS AND/OR SLEEVES, PROTECTIVE, LAPTOP AND/OR TABLET, 
neoprene AND/OR plastic AND/OR fabric, but NOT including bags OR 
cases

CASES OR COVERS, TABLET, plastic AND/OR woven nylon, whether OR 
not incorporating a stand, having ALL of the following:
  (a) width NOT greater than 31 cm;
  (b) height NOT greater than 20 cm;
  (c) depth NOT greater than 3 cm

PROTECTION CASES, TABLET AND/OR TOUCHSCREEN, including ALL of 
the following:
  (a) silicone back cover;
  (b) reinforced rubber bumpers;
  (c) polycarbonate frame;
  (d) replaceable screen protector

BAGS, CARRY, NOT less than 65% jute, having ALL of the 
following:
  (a) sewn in handles;
  (b) hanging loop;
  (c) rectangular base;
  (d) length NOT less than 410 mm;
  (e) width NOT less than 180 mm;
  (f) height NOT less than 310 mm;
  (g) weight NOT greater than 220 g

POUCHES AND/OR MONEY BELTS, TRAVEL

COOLER BAGS, insulated, soft sided, with OR without ANY of the 
following:
  (a) plastic bottle, with OR without insulated bottle holder;
  (b) plastic freezer flask AND/OR freezer brick;
  (c) plastic spoon; 
  (d) plastic knife; 
  (e) plastic fork;
  (f) plastic food containers; 
  (g) plastic lunch box;
  (h) plastic dish;
  (i) stainless steel bottle with OR without plastic closures 
      AND/OR insulated bottle holder

COOLERS, DRINK BOTTLE, soft sided, with OR without ANY of the 
following:
  (a) zippers; 
  (b) handles;
  (c) shoulder straps;
  (d) drinking bottles

COOLER BAGS, insulated, soft sided, with OR without EITHER of 
the following:
  (a) shoulder straps;
  (b) removable plastic liners

BACKPACKS, having ALL of the following:
  (a) weight NOT exceeding 200 g;
  (b) removable waist strap;
  (c) key ring clip;
  (d) pack away pocket

BACKPACKS, having ALL of the following:
  (a) weight NOT greater than 0.25 kg;  
  (b) pack away pocket;
  (c) open AND close zipper;
  (d) removable hydration sleeve AND/OR exit port

BAGS, TENNIS RACQUET SHAPED, thermally insulated

BAGS, nylon, having ALL of the following:
  (a) zipper closures;
  (b) mesh panels;
  (c) length NOT greater than 45 cm

COOLER BAGS, insulated, soft sided, with OR without ANY of the 
following:
  (a) plastic bottle, with OR without insulated bottle holder;
  (b) plastic freezer flask AND/OR freezer brick;
  (c) plastic spoon;
  (d) plastic knife;
  (e) plastic fork;
  (f) plastic food containers;
  (g) plastic lunch box;
  (h) plastic dish

CASES, COMPUTER HARD DRIVE, having ALL of the following:
  (a) width NOT greater than 12 cm;
  (b) length NOT greater than 17 cm;
  (c) height NOT greater than 5 cm

TOOLHOLDERS, TRADESMAN, being ANY of the following:
  (a) pouches;
  (b) holsters;
  (d) holders

COOLER BAGS, insulated, soft sided, including ANY of the 
following:
  (a) plastic storage containers;
  (b) plastic bottles;
  (c) freeze flasks

BAGS, POLYETHYLENE, having ALL of the following:
 (a) zipper closure;
 (b) rectangular base;
 (c) carry handles

BAGS AND/OR CASES, CAMERA

BAGS, NOVELTY, animal shapes, capacity NOT great than 10 litres

BAGS, FISHING TACKLE, with lure boxes

BAGS, NOT less than 80% recycled polyethylene terephthlate 
(PET), having ALL of the following:
  (a) handles sewn into side panels;
  (b) polyester stitching;
  (c) width NOT greater than 420 mm;
  (d) height NOT greater than 450 mm;
  (e) rectangular base

BAGS, being EITHER of the following:
  (a) bicycle transport;
  (b) bicycle wheel transport

BAGS, non-woven polypropylene, having ALL of the following:
  (a) handles sewn into side panels;
  (b) width NOT greater than 420 mm;
  (c) height NOT greater than 450 mm;
  (d) rectangular base

WALLETS, SURFBOARD FIN

BAGS, COOLER, insulated, soft sided with non-detachable carry 
handles OR straps, incorporating a picnic set AND/OR rug

COOLERS, DRINK BOTTLE, textile

SYSTEMS, HYDRATION, comprising ALL of the following:
  (a) plastic reservoir;
  (b) supply pipe;
  (c) bite valve;
  (d) shoulder and/or back carrying harness

HYDRATION SYSTEMS, WATER, comprising ALL the following:
  (a) Storage capacity (including insulated water compartment) 
NOT greater than 4 l
  (b) bladder mouth NOT less than 8 cm and NOT greater than
      9 cm;
  (c) key and wallet pocket;
  (d) shoulder straps

BAGS, COOLER, insulated, soft sided

CASES, TOOL, plastic, comprising ALL of the following:
  (a) pouches;
  (b) pallets AND/OR elastic straps

CASES, TOOL, plastic, having ALL of the following:
  (a) NOT less than 2 wheels;
  (b) telescopic handles;
  (c) pouches

SACKS, MOISTURE PROTECTION, comprising ALL of the following:
  (a) circular or oval base;
  (b) tape sealed seams;
  (c) roll top closures

BAGS, TRAVEL, INTERACTIVE VIDEO GAME, having ALL of the 
following:
 (a) external surface of plastic;
 (b) sectional storage compartments;
 (c) protective padding;
 (d) weight NOT greater than 5.5 kg

COOLER BAGS, insulated, soft sided, with permanent carry handles 
or straps, incorporating an AM/FM radio

CASES, violin or viola shaped

CARRY CASES, VIOLIN OR VIOLA BOWS

BABY CARRIERS, having permanently fitted shoulder straps AND/OR
 handles

BAGS, SURFBOARD

COOLER BAGS, insulated, soft sided, with permanent carry handles or
 straps

CARRY BAGS, GOLF BALL OR GOLF SHOE OR GOLF CLUB AND BAG

MOBILE PHONE HOLDERS, outer surface of plastic

CASES, contact lens

PROTECTOR CASES, moulded, polypropylene copolymer structural foam
 resin, having ALL of the following features:
   (a) rigid;
   (b) submersible;
   (c) dust and corrosion proof;
   (d) neoprene O-ring lid seal;
   (e) pressure relief valve;
   (f) carrying handle;
   (g) foam filled or padded dividers

CASES, MULTIMETER

JEWELLERY BOXES, paperboard, incorporating a musical movement

CASES, MUSICAL INSTRUMENT, having moulded plastic sides

PROTECTOR CASES, moulded, having ALL of the following:
  (a) pressure relief valve;
  (b) o-ring lid seal;
  (c) carry OR telescopic handle;
  (d) locking points,
with OR without ANY of the following:
     (i) internal foam;
    (ii) wheels

CASES AND/OR COVERS AND/OR SLEEVES, TABLET COMPUTER, whether OR 
not incorporating a stand

INSTRUMENT CASES, aluminium, foam padded, including BOTH carry 
handles AND latches, with OR without EITHER of the following:
  (a) valves;
  (b) air vents

STORAGE CASES, COMPACT DISC, portable, having an outer surface
 of plastic

MALLETS AND HAMMERS, having ALL of the following:
   (a) coiled leather head NOT exceeding 70 mm diameter;
   (b) wooden handle;
   (c) able to strike sharpened cutting edges without splitting;
   (d) NOT including mallets with changeable or replaceable tips

MALLETS, rawhide, jewellers"