Tariff Concession Orders

CATTLE EAR TAGS, plastic, insecticidal, having a basis of 
piperonyl butoxide AND beta-cyfluthrin

INSECTICIDES, having a basis of lambda cyhalothrin

INSECTICIDES, having a basis of BOTH of the following:
  (a) thiamethoxam;
  (b) lambda cyhalothrin

INSECTICIDES, having a basis of lambda-cyhalothrin AND 
chlorantraniliprole

INSECTICIDES, liquid form, having an active ingredient of 
malathion

REPELLENT, having a basis of lambda cyhalothrin, containing NOT 
greater than one percent active constituent

INSECTICIDES, having a basis of BOTH of the following:
  (a) thiamethoxam;
  (b) lambda-cyhalothrin

INSECTICIDES, having an active constituent of fenitrothion

INSECTICIDES, having a basis of lambda cyhalothrin

INSECTICIDES, having a basis of fenamiphos

INSECTICIDES, having a basis of thiodicarb

INSECTICIDES, MOSQUITO, including BOTH of the following:
  (a) NOT less than 6 impregnated mats;
  (b) having an active ingredient of allethrin

MOSQUITO REPELLENT UNITS, including ALL of the following:
  (a) insecticide mats;
  (b) butane cartridges;
  (c) ground stakes;
  (d) post mounting rings

PRESSURISED INSECTICIDE, including BOTH of the following:
  (a) can;
  (b) insecticide net content NOT less than 399 grams

INSECTICIDES, having active ingredients of cyantraniliprole AND 
thiamethoxam

INSECTICIDES, having active ingredients of pymetrozine AND 
cyantraniliprole

INSECTICIDES, having active ingredients of diafenthiuron AND 
cyantraniliprole

INSECTICIDE, having a basis of afidopyropen

CATTLE EAR TAGS, plastic, insecticidal, having ANY of the 
following active ingredients OR combinations:
  (a) diazinon;
  (b) coumaphos AND diazinon

REPELLANT LANTERN, including BOTH of the following:
  (a) insecticide mats; 
  (b) butane cartridge

INSECTICIDES, MOSQUITO, being refill cartridges AND insect 
repellent mats

INSECTICIDES, MOSQUITO, being refill canisters, including ALL of 
the following:
  (a) butane cartridge;
  (b) insecticide mats;
  (c) piezo ignition

REPELLANT, MOSQUITO, including ALL of the following:
(a) dispersing element;
(b) insecticide mats;
(c) piezo ignition;
(d) carry bag

INSECTICIDES, having a basis of cyantraniliprole

INSECTICIDES, in granular form, having an active constituent of 
acephate

INSECTICIDE, water dispersible granules, having the active 
ingredient clothianidin

INSECTICIDES, MOSQUITO, consisting of NOT less than 15 
impregnated mats

INSECTICIDES, having a basis of methomyl

INSECTICIDES, having the active ingredient sulfoxaflor

INSECTICIDES, having the active ingredient spinetoram

INSECTICIDES, having an active ingredient of pymetrozine

INSECTICIDES, ANIMAL, having an active ingredient of imidacloprid

INSECTICIDES, having a basis of BOTH of the following:
  (a) thiamethoxam;
  (b) chlorantraniliprole

INSECTICIDES, having a basis of flubendiamide

TRAPS AND LURES, INSECT, comprising BOTH a trap body and 
synthetic pheromone attractant OR synthetic pheromone 
attractants imported separately

INSECTICIDES, having a basis of thiamethoxam

INSECTICIDES, having a basis of chlorantraniliprole

INSECTICIDES, having a basis of fenoxycarb

INSECTICIDES, having a basis of fenamiphos

INSECTICIDES, having a basis of thiodicarb

COLLARS, FLEA AND/OR TICK, CATS AND/OR DOGS

INSECTICIDES, having a basis of spinosad

INSECTICIDES, having a basis of buprofezin

FUMIGANTS, having a basis of aluminium phosphide

INSECTICIDES, smoke generator type, comprised of a canister
 containing ignitable pesticide with a basis of permethrin

INSECTICIDES, being or having a basis of bacillus thuringiensis
 var. israelensis

INSECTICIDES, having a basis of aluminium phosphide or magnesium
 phosphide

INSECTICIDES, having a basis of EITHER of the following:
   (a) fipronil;
   (b) (s)-methoprene

INSECTICIDES, having a base of methoxyfenozide

INSECTICIDE, having a base of gamma-cyhalothrin

INSECTICIDES, granular, having a basis of chlorpyrifos

INSECTICIDES, having a basis of tau-fluvalinate

INSECTICIDE, oxadiazine class, dry flowable, having a basis of
 indoxacarb

INSECTICIDE, oxadiazine class, in liquid form, having a basis of
 indoxacarb

INSECTICIDES, having a basis of emamectin benzoate

LURES, INSECT, PHEROMONE OR ATTRACTANT, having BOTH of the
 following:
   (a) a basis of (z)-8-dodecen-l-yl acetate AND (e)-8-dodecen-l-yl
       acetate AND (z)-8-dodecen-l-ol;
   (b) composed of a rectangular plastic based release strip
       NOT greater than 80 mm x 55 mm x 1 mm, attached to a
       plastic hook

INSECTICIDES, having a basis of pirimicarb

INSECTICIDES, being or having a basis of triflumuron

INSECTICIDES, being or having a basis of bacillus thuringiensis
 var, aizawai

NAPHTHALENE BALLS

FLY TRAP having BOTH of the following:
   (a) disposable plastic container biodegradeable;
   (b) bait composed of animal proteins

INSECTICIDES, being or having a basis of bacillus thuringiensis
 var, kurstaki

SHEETS, paper, containing sodium metabisulphite

FUNGICIDES, granule form, having an active ingredient of folpet

FUNGICIDES, having an active ingredient of banda de lupinus 
albus doce (BLAD)

FUNGICIDES, having an active ingredient of mandipropamid AND 
oxathiapiprolin

FUNGICIDES, having an active ingredient of mefentrifluconazole

FUNGICIDES, having active ingredients of fludioxonil AND 
metalaxyl-M

FUNGICIDES, having active ingredients of fludioxonil AND sedaxane

FUNGICIDES, having ALL of the following active ingredients:
  (a) 33 g/L eugenol;
  (b) 66 g/L thymol;
  (c) 66 g/L geraniol

FUNGICIDES, having active ingredients of azoxystrobin AND 
prothioconazole

FUNGICIDES, having an active ingredient of isofetamid

FUNGICIDES, having active ingredients of fludioxonil AND 
pydiflumetofen

FUNGICIDES, having active ingredients of difenoconazole AND 
pydiflumetofen

FUNGICIDES, having active ingredients of cyprodinil 
AND fludioxonil

FUNGICIDES, having active ingredients of azoxystrobin AND 
difenoconazole

FUNGICIDES, having active ingredients of difenoconazole AND 
metalaxyl-m AND sedaxane

FUNGICIDES, having active ingredients of azoxystrobin AND 
propiconazole

FUNGICIDES, having an active ingredient of aureobasidium 
pullulans

FUNGICIDES, water dispersible granules, having a basis of 
boscalid

FUNGICIDES, having a basis of fluxapyroxad

FUNGICIDES, having active ingredients of benzovindiflupyr AND
propiconazole

FUNGICIDES, having ALL of the following active ingredients:
  (a) azoxystrobin;
  (b) fludioxonil;
  (c) mefenoxam;
  (d) sedaxane

FUNGICIDES, having active ingredients of fludioxonil AND
propiconazole

FUNGICIDES, having an active ingredient of bacillus subtilis

FUNGICIDES, having a basis of imazalil AND pyrimethanil

FUNGICIDES, in liquid form, having an active ingredient of tea 
tree oil

FUNGICIDES, having a basis of benzovindiflupyr

FUNGICIDES, having a basis of isopyrazam

FUNGICIDES, having a basis of imazalil

FUNGICIDES, in water dispersible granule form, having active 
constituents being BOTH mancozeb AND chlorothalonil

FUNGICIDES, having an active constituent of pydiflumetofen

FUNGICIDES, suspension concentrate, having a basis of mancozeb

FUNGICIDES, having a basis of mandipropamid

FUNGICIDE, having an active ingredient of pyriofenone

FUNGICIDES, including active ingredients of azoxystrobin AND/OR 
cyproconazole

FUNGICIDES, having a basis penthiopyrad

FUNGICIDES, having a basis of proquinazid

FUNGICIDES, having a basis of oxathiapiprolin

FUNGICIDES, granular, water dispersible, active constituents 
being mancozeb AND metalaxyl

FUNGICIDES, having a basis of azoxystrobin AND metalaxyl-M

FUNGICIDES, having a basis of cyazofamid

SHEETS, containing sodium metabisulphite

FUNGICIDES, having a basis of a benzimidazole derivative

FUNGICIDES, having a basis of cyflufenamid

FUNGICIDES, having a basis of cyprodinil

FUNGICIDES, having an active ingredient of difenoconazole

FUNGICIDES, having an active ingredient of fludioxonil

FUNGICIDES, having a basis of metalaxyl-M

FUNGICIDES, granular, having a basis of mancozeb

FUNGICIDES, having a basis of trifloxystrobin

FUNGICIDES, having a basis of EITHER of the following:
   (a) myclobutanil;
   (b) quinoxyfen

FUNGICIDE, having a basis of captan

FUNGICIDES, having a basis of azoxystrobin

FUNGICIDE, having a basis of fluazinam

FUNGICIDES, mancozeb and metalaxyl-M mixture based

FUNGICIDES, having a basis of prochloraz

FUNGICIDES, having a basis of zinc dimethyldithiocarbamate

FUNGICIDES, having a basis of Metiram

FUNGICIDES, having a basis of a coordination compound of zinc ion
 and manganese ethylene bisdithiocarbamate

FUNGICIDES, having a basis of propineb (dithiocarbamate)

BAGS, SULPHUR DIOXIDE GENERATING, containing sodium 
metabisulphite

SHEETS, paper, containing sodium metabisulphite

BIOCIDES, having a basis of 3-iodo-2-propynol butyl
 carbamate

FUNGICIDES, being concentrates consisting of 10,10
 oxybisphenoxarsine in a polymeric resin carrier

FUNGICIDES, having a basis of wettable sulphur

FUNGICIDES, being or having a basis of copper compounds

HERBICIDES, having an active ingredient of propaquizafop

HERBICIDES, having an active ingredient of diuron

HERBICIDES, having an active ingredient of methyl 
sulfanilylcarbamate

HERBICIDES, having an active ingredient of metobromuron

HERBICIDES, having an active ingredient of foramsulfuron

HERBICIDES, having an active ingredient of pyroxasulfone

HERBICIDES, having an active ingredient of s-metolachlor

PLANT GROWTH REGULATORS, having a basis of trinexapac-ethyl

PLANT GROWTH REGULATORS, having an active constituent of 
uniconazole-P

HERBICIDES, technical intermediate, having a basis of NOT less 
than 37% clethodim

PLANT GROWTH REGULATORS, having a basis of chlormequat chloride

HERBICIDES, having a basis of terbuthylazine

HERBICIDES, having an active constituent of prodiamine

HERBICIDES, GROWTH REGULATOR, having a basis of trinexapac

HERBICIDES, comprising BOTH of the following active ingredients:
  (a) pinoxaden;
  (b) cloquintocet-mexyl

GIBBERELLINS and preparations based thereon

FLUPROPANATE, TECHNICAL

HERBICIDES, having a basis of halosulfuron-methyl

GROWTH REGULATORS, with active constituent being 1,1 dimethyl
 piperidinium chloride

HERBICIDES, having an active ingredient of mesotrione

HERBICIDES, having a basis of linuron

METSULFURON-METHYL, wettable powder at 60% strength, a member of the
 sulfonyl urea herbicides, group B
 For the purposes of this order, tolerances allowable are plus OR
 minus 5%

TABLETS, water purification, active ingredient iodine in the form
 of tetraglycine hydroperiodide

DISINFECTANTS, in solid form, having a basis of sodium dichloro-
s-
triazinetrione dihydrate

HOSPITAL GRADE DISINFECTANT PREPARATIONS, tablet form, having 
NOT less than 50% w/w active ingredient sodium 
dichloroisocyanurate

STERILISING CASSETTES, HYDROGEN PEROXIDE, single use, including 
BOTH of the following:
  (a) NOT less than ten polyethylene containers, whether OR not
      including polystyrene shells, each containing NOT more
      than 6 ml of NOT less than 58% aqueous hydrogen peroxide
      solution;
  (b) outer polypropylene film wrapping, including absorbent
      material AND leak indicator

DISINFECTANT TABLETS, having a basis of troclosene sodium

FUNGICIDE AND DISINFECTANT PREPARATIONS, water dispersible 
granule form, having a basis of mancozeb and metalaxyl

DISINFECTANT, MEDICAL, including ALL of the following: 
  (a) hydrogen peroxide; 
  (b) acetic acid; 
  (c) peracetic acid; 
  (d) conforming to Australian Register of Therapeutic Goods 
      entry for Medical Device Included Class IIb

BIOCIDES, having active ingredients of sodium bromide AND sodium 
hypochlorite, with sulfamate stabiliser

FUNGAL AND BACTERIAL PREPARATIONS, having a basis of tribasic 
copper sulphate

PREPARATIONS, DISINFECTANT AND FUNGICIDAL, having an active 
ingredient of azoxystrobin

DISINFECTANTS, having an active ingredient of etridiazole

PREPARATIONS, DISINFECTANT AND FUNGICIDAL, having BOTH of the 
following:
  (a) copper hydroxide content by weight NOT less than 1%;
  (b) metalaxyl-m content by weight NOT less than 1%

DISINFECTANTS AND FUNGICIDES, having active ingredients of 
carboxin AND thiram

BIOFUNGICIDES, having an active ingredient of bacillus 
amyloliquefaciens

DISINFECTANT POWDERS, AGRICULTURAL ANIMAL ENCLOSURE, including 
N-chloro tosylamide sodium salt

WIPES, ANTISEPTIC, having ALL of the following:
  (a) NOT less than 2% weight per volume of chlorhexidine 
      gluconate and NOT greater than 2.5% weight per volume of 
      chlorhexidine gluconate;  
  (b) NOT less than 70% volume per volume of isopropyl alcohol 
      and NOT greater than 71% volume per volume of isopropyl 
      alcohol;   
  (c) NOT less than 0.65 mL clear solution and NOT greater than 
      1.5 mL clear solution

WIPES AND/OR SPONGES AND/OR SWABS, ANTISEPTIC, having ALL of the 
following:
  (a) chlorhexidine gluconate NOT less than 2% and NOT greater 
than 2.5% weight per volume;
  (b) isopropyl alcohol NOT less than 70% and NOT greater than 
71% volume per volume;
  (c) clear OR tinted solution NOT less than 1.6 ml and NOT 
greater than 97 ml

DISINFECTANTS, conforming to therapeutic goods certificate (TGA) 
medical device Class II B category, being dual compartment 
burstable sachets OR bottles, containing citric acid AND 
activator solution in separate containers, with OR without wipes

WASHER DISINFECTANT, conforming to therapeutic goods certificate 
(TGA) medical device included Class 1 category, in bottles NOT 
less than 4.9 litres and NOT greater than 5.0 litres, including 
BOTH of the following:
  (a) citric acid;
  (b) activator solution

DISINFECTANTS, SURFACE, being dual compartment burstable sachets 
OR bottles, containing citric acid AND activator solution in 
separate containers, with OR without wipes

WIPES, CLEANING, impregnated with two OR more of the following:
  (a) ethanol;
  (b) methanol;
  (c) benzyl-C8-C18 alkyldimethylammonium chloride;
  (d) 2-propanol;
  (e) 1-butoxy-2-propanol;
  (f) didecyl dimethyl ammonium chloride

DISINFECTION WIPES SYSTEM, MEDICAL, having ALL of the following:
  (a) pre-clean AND sporicidal AND rinse wipe process;
  (b) active sporicidal ingredient chlorine dioxide;
  (c) conforming to therapeutic goods certificate medical 
      device included class 11 B category

WIPES, CLEANING, impregnated with isopropyl alcohol

WIPES, CLEANING, impregnated with ethyl alcohol

MICROBIOCIDES, containing triazine

CASSETTES, STERILISING, HYDROGEN PEROXIDE, having ALL of the
 following:
   (a) plastic vials each containing NOT more than 2 ml of 58%
       aqueous hydrogen peroxide solution;
   (b) a cardboard cover having hydrogen peroxide indicator strips
       and a hydrogen peroxide absorbent layer;
   (c) an outer wrapping of hydrogen peroxide impermeable plastic

BIOCIDES, having a basis of 1-Bromo-3-Chloro-5, 5-Dimethylhydantoin

DISINFECTANT, water, being a 20% aqueous solution of polymeric
 biguanide hydrochloride

TABLETS, water purification, active ingredient iodine in the form
 of tetraglycine hydroperiodide

DISINFECTANT FOR WATER, being tablets, powder or liquid for the
 destruction or inactivation of micro-organisms in water.  Active
 ingredient: Silver (Ag)

TABLETS, germicidal, being EITHER of the following:
   (a) anti-bacterial, each containing 500 mg + or - 12% sodium
       dichloroisocyanurate (sodium dichloro-S-triazinetrione);
   (b) water purifying, containing 17 mg or 425 mg compound sodium
       dichloro-S-triazine trion

TRISODIUM PHOSPHATE, chlorinated, whether or not containing
 potassium bromide

CALCIUM HYPOCHLORITE

INSECTICIDES AND MITICIDES, having active ingredients of 
spidoxamat AND flupyradifurone

MITICIDES, having an active ingredient of isocycloseram

FUNGICIDES AND NEMATICIDES, having an active ingredient of 
Cyclobutrifluram

NEMATICIDES, having an active ingredient of cyclobutrifluram

INSECTICIDES AND MITICIDES, having an active ingredient of 
Isocycloseram

NEMATICIDES, having an active ingredient of 1,3-dichloropropene

ACARICIDES AND INSECTICIDES AND RODENTICIDES, fumigant, having a 
basis of stabilised hydrogen cyanide

INSECTICIDE AND MITICIDE, having a basis of chlorpyrifos

NEMATICIDES, having an active ingredient of fluensulfone

FUNGICIDE AND DISINFECTANT AND MITICIDE PREPARATIONS, having 
an active ingredient of mancozeb

FUNGICIDES AND INSECTICIDES AND NEMATICIDES, having a basis of 
metam sodium

INSECTICIDES AND PRESSURISED INSECTICIDES, having a basis of 
dinotefuran

INSECTICIDES AND RODENTICIDES AND ACARICIDES, having a basis of 
aluminium phosphide, being EITHER of the following:
  (a) fumigation blankets;
  (b) fumigation tablets

NEMATICIDES, having an active ingredient of abamectin

ACARICIDE, having a basis of bifenazate

FUNGICIDAL AND MITICIDAL PREPARATIONS, having an active 
ingredient of mancozeb

RODENTICIDES, having a basis of difethialone

GAS, ETHANEDINITRILE, colourless, liquefied

INSECTICIDE AND MITICIDE, having active ingredients of abamectin 
AND chlorantraniliprole

MITICIDE AND INSECTICIDE, in liquid form, having an active 
ingredient of abamectin

BIOCIDES, having BOTH of the following active substances:
  (a) ethylenedioxy dimethanol;
  (b) 2-Octyl-2H-isothiazol-3-one

INSECTICIDE, having a basis of chlorpyrifos

INSECTICIDES AND/OR NEMATICIDES, having a basis of oxamyl

MITICIDES, having an active constituent of fenbutatin oxide

AQUATIC ALGICIDES AND HERBICIDES, having a basis of mono (N,N-
dimethylalkylamine) salt of endothall

FUNGICIDES AND INSECTICIDES AND MITICIDES, having a basis of 
wettable sulphur

RODENTICIDES, WAX BLOCK, with active constituent bromadiolone

NEMATICIDES AND MITICIDES, having a basis of abamectin

RODENTICIDES, having a basis of difenacoum

RODENTICIDE, having a basis of brodifacoum

MOLLUSCICIDES, having an active ingredient of metaldehyde

PLANT ACTIVATOR, with a basis of acibenzolar-S-methyl

PRESERVATIVES, having a basis of 5-Chloro-2-methyl-4-isothiazolin-3-
 one

BIOCIDES, having a basis of 1,2-benzisothiazolin-3-one

BIOCIDES, based on derivatives or compounds of ANY of the
 following:
   (a) carbonitrile compounds;
   (b) thiadiazine compounds;
   (c) quaternary ammonium compounds;
   (d) bromine compounds;
   (e) isothiazolone;
   (f) formal;
   (g) thiazole;
   (h) benzimidazole;
   (i) morpholine;
   (j) triazine;
   (k) phenol;
   (l) urea

BIOCIDES, containing ANY of the following:
   (a) isothiazolone;
   (b) formal;
   (c) thiazole;
   (d) bromine;
   (e) benzimidazole;
   (f) morpholine;
   (g) triazine;
   (h) quarternary ammonium;
   (i) phenol;
   (j) urea;
   (k) carbonitrile;
   (l) thiadiazine

RODENTICIDE WAX BLOCKS, with active constituent brodifacoum

TRAP, rodent, glue surfaced boards

BROMADIOLONE

MICROBIOCIDES, having a basis of isothiazolone

STABILISERS, thermal, being organo phosphites

STABILISERS, light, hindered amine, polymeric

STABILISERS, based on organo tin compounds

ANTIOXIDANTS, rubber, being EITHER of the following:
   (a) 1,2-dihydro 2,2,4 trimethylquinoline, polymerised;
   (b) condensation product of 2,4- and 2,5- dimethyl phenols
       with butyraldehyde and formaldehyde

ANTIOXIDANTS, rubber, being ANY of the following:
   (a) alkyl and aralkyl substituted phenols;
   (b) diaryl p phenylene diamines;
   (c) 2 mercapto-benzimidazole;
   (d) 4 and 5 methyl-mercapto-benzimidazole

ANTIOXIDANTS, rubber, being EITHER of the following:
   (a) amine type;
   (b) bis phenolic type

ANTIOXIDANTS, rubber, based on ANY of the following:
   (a) 1,4-benzenediamine, N, N"-mixed phenol and tolyl
       derivatives;
   (b) phenol, 4-methyl, reaction products with
       dicyclopentadiene and isobutylene;
   (c) propanoic acid, 3 dodecylthioxybis (2,1-ethanediyloxy-2,
       1-ethanediyl) ester

PREPARATIONS, ultraviolet light absorbing

POWDER, fire extinguishing, having a basis of potassium bicarbonate

POWDER, fire extinguishing, having a basis of ANY of the
 following:
   (a) sodium bicarbonate;
   (b) potassium chloride;
   (c) ammonium phosphate;
   (d) urea/potassium bicarbonate mixture

FIRE EXTINGUISHING GAS, total flooding agent, capable as a retrofit
 replacement of halon 1301, containing no bromine

FIRE EXTINGUISHING FOAM, concentrate

CARTRIDGES OR CONTAINERS, FIRE EXTINGUISHER, non-pressurised, 
having a flame activated fuse

SOLVENT EVAPORATION REPLACEMENT SOLUTIONS, CONTINUOUS INK JET
 PRINTER, in ANY of the following forms:
   (a) bottles;
   (b) barrels;
   (c) drums

STAIN REMOVER, put up in retail packs in containers NOT exceeding
 150 mL, formulated to remove specific staining produced by ALL of
 the following:
   (a) adhesives containing solvents;
   (b) chewing gum;
   (c) correction fluid;
   (d) glues containing solvents;
   (e) nail varnish

SOLVENT, being a mixture of refined Di-methyl esters of adipic acid,
 glutaric acid and succinic acid

CATALYSTS, consisting of nickel or nickel oxide distributed on an
 inert carrier

CATALYSTS, having active components of nickel AND/OR nickel 
oxide with OR without promoters

CATALYSTS, distributed on or in pelletised or particulate inert
 support materials, their active substance being precious metal
 or precious metal compounds

CATALYSTS, distributed on or in a powdered inert support material,
 the active substance being palladium

MEMBRANES, ELECTROLYSER, having EITHER of the following active 
substances:
  (a) precious metal; 
  (b) precious metal compounds

CATALYST, GRANULATED, including ALL of the following:
  (a) platinum;
  (b) palladium; 
  (c) tin oxide

CATALYSTS, platinum complex in polymethylvinylsiloxane solution

BRICKS, AUTOMOTIVE CATALYTIC

CATALYSTS, distributed on or in pelletised or granulated inert
 support materials, their active substance being ANY of the
 following:
   (a) cobalt and molybdenum or their compounds;
   (b) copper and bismuth or their compounds;
   (c) copper oxide and iron oxide;
   (d) copper oxide and zinc oxide;
   (e) nickel and molybdenum or their compounds;
   (f) nickel and tungsten or their compounds;
   (g) phosphoric acid;
   (h) precious metal or precious metal compounds mixed with other
       active substances;
   (i) titanium chloride;
   (j) vanadium pentoxide;
   (k) zinc oxide

CATALYST, VANADIUM OXIDE AND/OR PENTOXIDE AND/OR ALKALI 
SULPHATE, having ALL of the following: 
  (a) carrier distributed;
  (b) caesium promoter;
  (c) clover shaped

CATALYST, VANADIUM PENTOXIDE, having BOTH of the following: 
  (a) carrier distributed;
  (b) ring shaped

CATALYSTS, with OR without natural graphite, having a basis of 
ANY one OR more of the following:
  (a) copper oxide;
  (b) zinc oxide;
  (c) aluminium oxide

CATALYSTS, having a basis of ANY one OR more of the following:
  (a) molybdenum;
  (b) molybdenum trioxide; 
  (c) iron molybdate

CATALYST, trilobal shape pellet OR granule form, including BOTH 
the following:
  (a) titanium dioxide carrier;
  (b) active ingredient being vanadium pentoxide

CATALYST, VANADIUM PENTOXIDE, daisy shape, having BOTH of the 
following:
  (a) potassium promoter;
  (b) sodium promoter

CATALYST, VANADIUM PENTOXIDE, daisy shape, having ALL of the 
following:
  (a) potassium promoter;
  (b) sodium promoter;
  (c) caesium promoter

CATALYSTS, with or without promoters, carrier distributed OR 
supported, active substance being ANY one OR more of the 
following:
  (a) iron AND/OR iron compounds;
  (b) chromium AND/OR chromium compounds;
  (c) zinc AND/OR zinc compounds;
  (d) copper AND/OR copper compounds;
  (e) aluminium AND/OR aluminium compounds;
  (f) cesium AND/OR cesium compounds

CATALYSTS, carrier distributed OR supported, active substance 
being ANY of the following, including combinations thereof:
  (a) cobalt or ANY of its compounds;
  (b) aluminium or ANY of its compounds; 
  (c) iron or ANY of its compounds

CATALYSTS, SUPPORTED, being sulphides on an aluminium oxide support

CATALYSTS, fluid cracking

AMINE CATALYSTS

PREPARATIONS, having a basis of trimethylcyclohexylidenebis
 (tert-butyl) peroxide

CATALYST, AMMONIA SYNTHESIS

CATALYSTS, consisting of a mixture of copper oxide, zinc oxide and
 aluminium oxide

CATALYSTS, OXIDATION, powder OR liquid, including EITHER of the 
following:
  (a) sodium chloride; 
  (b) propylene glycol

PREPARATION SOLUTION CARRIER, having ALL of the following:
  (a) solvent naphthalene;
  (b) di-isobutyl carbinol;
  (c) 2-amyl anthraquinone

PHOTOINITIATORS, ULTRA-VIOLET CURING, having ANY of the 
following:
  (a) acetone content NOT exceeding 60% by weight;
  (b) toluene content NOT exceeding 30% by weight;
  (c) diphenyl phospine oxide content NOT exceeding 10% 
      by weight; 
  (d) isobutyl acetate content NOT exceeding 10% by weight

CATALYSTS, being EITHER of the following:
  (a) Nitrous Oxide (N2O) abatement;
  (b) Nitrogen Oxide AND Nitrogen Dioxide removal (DeNOx)

ADDITIVES, OXO-BIODEGRADATION, POLYMER MASTERBATCH

CATALYST, polyethylene based, masterbatch, with or without an 
added UV stabiliser

POLYETHYLENE, high density, cross linkable, grafted with a vinyl 
silane group

PREPARATIONS, POLYMERISATION INITIATOR, having an active 
component of cumene hydroperoxide

CEMENT, REFRACTORY, BLAST FURNACE HOT BLAST MAINS, 
having ALL of the following:
  (a) alumina (AL2O3) content NOT less than 50%; 
  (b) silica (SiO2) content NOT less than 37%;
  (c) ferrous oxide (Fe2O3) content NOT less than 1%

RAMMING MIXTURES, RESIN BONDED, BLAST FURNACE STAVES, having a 
silicon carbide content NOT less than 59%

SEALANT, CONTINUOUS CASTER, having ALL of the following:
  (a) fire clay content NOT greater than 65%;
  (b) colloidal silica content NOT greater than 10%;
  (c) denatured alcohol content NOT greater than 25%;
  (d) boiling and/or melting point NOT less than 1 400 degrees 
      centigrade;
  (e) auto ignition temperature NOT less than 500 degrees 
      centigrade

TAPHOLE FILLERS, REFRACTORY, having ALL of the following:
  (a) Magnesia (MgO) content greater than 45%;
  (b) Silica (SiO2) content greater than 36%;
  (c) Ferrous Oxide (Fe2O3) content greater than 6%;
  (d) maximum grain size less than 7 mm

CERAMIC WELDING POWDER, COKE OVEN LINING, having ALL of the
 following:
   (a) silica (SiO2) content NOT less than 90%;
   (b) bulk density greater than 1.5 kg/dm3 and less than 3.0 kg/dm3;
   (c) thermal expansion greater than 1% and less than 2% at 1 200
       degrees centigrade;
   (d) crushing strength greater than 50 MPa at 25 degrees centigrade

TAPHOLE GROUT, REFRACTORY, comprising ALL of the following:
   (a) magnesia content NOT less than 90%;
   (b) water content greater than 10% and less than 20%;
   (c) bulk weight greater than 1 500 grams/cubic metre

TUNDISH COATING, REFRACTORY, comprising ALL of the following:
   (a) magnesia (MgO) content NOT less than 50% and NOT greater than
       80%;
   (b) silica (SiO2) content NOT less than 15% and NOT greater than
       36%;
   (c) alumina (Al2O3) content NOT greater than 3.5%;
   (d) chrome (Cr2O3) content NOT greater than 1%;
   (e) dried bulk density NOT greater than 2 000 kg/cubic metre

CONCRETE, REFRACTORY, with OR without binding agent having 
silicon dioxide content NOT less than 40%

REFRACTORY MORTARS, having ALL of the following:
  (a) service temperature NOT greater than 1 800 degrees Celsius;
  (b) aluminium oxide content NOT less than 45 %;
  (c) silicon dioxide content NOT greater than 50 %;
  (d) ferric oxide content NOT greater than 2 %

REFRACTORY MORTARS, having ALL of the following:
  (a) service temperature NOT greater than 1 800 degree Celsius;
  (b) aluminium oxide content NOT less than 90%;
  (c) silicon dioxide content NOT greater than 10%;
  (d) ferric oxide content NOT greater than 1%

REFRACTORY INSULATION, TUNDISH AND LADLE FURNACE, granule AND/OR 
powder form, including BOTH of the following:
  (a) silicon dioxide NOT less than 37% and NOT greater
      than 44%; 
  (b) magnesium oxide NOT less than 21% and NOT greater than 28%

REFRACTORY MORTARS AND/OR RAMMING MIXES, having ALL of the 
following ;
  (a) magnesium oxide content NOT less than 45% and NOT
    greater than 70%;
  (b) iron (iii) oxide content NOT less than 10% and NOT
    greater than 25%;
  (c) chromium (iii) oxide content NOT less than 10% and NOT
    greater than 25%;
  (d) aluminium oxide content NOT less than 2% and NOT
    greater than 10%

LINING MATERIALS, COMBUSTION CHAMBER, being ANY of the following:
  (a) refractory mortar containing by weight NOT less than
      42% alumina (Al2O3);
  (b) refractory concrete containing by weight NOT less than 
      60% alumina (Al2O3);
  (c) fire clay mortar OR concrete; 
  (d) ramming plastics containing by weight NOT less than
      74% alumina (Al2O3)

MIXES, castable, having ALL the following:
   (a) capable of achieving cold crushing strength after drying at
       110 degrees C of greater than 180 mpa;
   (b) capable of operating at temperatures of 900 degrees C and
       above;
   (c) contains a minimum of either:
         (i) 50% alumina; or
        (ii) 50% silicon carbide aggregate

BACK FILLING MIXES, dry, having an aluminium oxide content NOT 
less than 80%

MASTICS, REFRACTORY, water based, having ALL of the following:
  (a) water content NOT less than 40%;
  (b) low bio-persistent fibre content NOT less than 20%;
  (c) thermal stability NOT less than 1 250 degrees Celsius;
  (d) wet bulk density NOT greater than 1 700 kg/m3

MORTARS, REFRACTORY, magnesia based, having ALL of the following:
  (a) magnesium oxide (MgO) content NOT less than 50% and NOT 
      greater than 55%;
  (b) calcium oxide (CaO) content NOT greater than 2.5%;
  (c) silicon dioxide (SiO2) content NOT greater than 1.5%;
  (d) iron(III) oxide (Fe2O3) content NOT less than 17% and NOT 
      greater than 21%;
  (e) aluminium oxide (A12O3) content NOT less than 5% and NOT 
      greater than 7.5%;
  (f) chromium(III) oxide (Cr2O3) content NOT less than 17.0% 
      and NOT greater than 21%

CASTING MIX, REFRACTORY,  including  BOTH of the following: 
  (a) magnesite oxide (MgO) content NOT less than 40%; 
  (b) chromite oxide( Cr2O3) content  NOT less than 20%

MORTARS, REFRACTORY having ALL of the following:
  (a) magnesium oxide content NOT less than 50% and NOT greater 
      than 60%;
  (b) calcium oxide content NOT greater than 2.5%;
  (c) silicon dioxide content NOT greater than 1.5%;
  (d) iron oxide content NOT less than 14% and NOT greater than 
      17%;
  (e) aluminium oxide content NOT less than 5% and NOT greater 
      than 7.5%;
  (f) chromium (III) oxide content NOT less than 17.5% and NOT 
      greater than 20.5%;
  (g) phosphorus pentoxide NOT greater than 2%

CONCRETE, REFRACTORY, including ALL of the following:
(a) aluminium oxide content NOT less than 86% and NOT greater 
    than 90%;
(b) silicon dioxide content NOT greater than 1.5%;
(c) iron oxide content NOT greater than 1%;
(d) chromium (III) oxide content NOT less than 9% and NOT 
    greater than 11%

HEARTH REPAIR MIXES, having a basis of magnesium oxide

HOT REPAIR MIXTURE, REFRACTORY, magnesia-based, having ALL of 
the following:
  (a) magnesium oxide content NOT less than 58%;
  (b) calcium oxide content NOT less than 15%;
  (c) iron oxide content NOT greater than 2%

HOT REPAIR MIXTURE, REFRACTORY, sintered magnesia based, having 
ALL of the following:
  (a) magnesium oxide (MgO) content NOT less than 65%;
  (b) calcium oxide (CaO) content NOT less than 15%;
  (c) iron(III) oxide (Fe2O3) content NOT less than 3%

GUNNING MATERIAL, FURNACE, carbon bonded, having ALL of 
the following:
  (a) magnesium oxide content NOT less than 50%;
  (b) calcium oxide content NOT greater than 15%;
  (c) coal tar pitch content NOT greater than 30%;
  (d) graphite content NOT greater than 10%

CEMENT, REFRACTORY, BLAST FURNACE HOT BLAST MAINS, 
having ALL of the following:
  (a) alumina (AL2O3) content NOT less than 50%; 
  (b) silica (SiO2) content NOT less than 37%;
  (c) ferrous oxide (Fe2O3) content NOT less than 1%

RAMMING MIXTURES, RESIN BONDED, BLAST FURNACE STAVES, having a 
silicon carbide content NOT less than 59%

SEALANT, CONTINUOUS CASTER, having ALL of the following:
  (a) fire clay content NOT greater than 65%;
  (b) colloidal silica content NOT greater than 10%;
  (c) denatured alcohol content NOT greater than 25%;
  (d) boiling and/or melting point NOT less than 1 400 degrees 
      centigrade;
  (e) auto ignition temperature NOT less than 500 degrees 
      centigrade

TAPHOLE FILLERS, REFRACTORY, having ALL of the following:
  (a) Magnesia (MgO) content greater than 45%;
  (b) Silica (SiO2) content greater than 36%;
  (c) Ferrous Oxide (Fe2O3) content greater than 6%;
  (d) maximum grain size less than 7 mm

CERAMIC WELDING POWDER, COKE OVEN LINING, having ALL of the
 following:
   (a) silica (SiO2) content NOT less than 90%;
   (b) bulk density greater than 1.5 kg/dm3 and less than 3.0 kg/dm3;
   (c) thermal expansion greater than 1% and less than 2% at 1 200
       degrees centigrade;
   (d) crushing strength greater than 50 MPa at 25 degrees centigrade

TAPHOLE GROUT, REFRACTORY, comprising ALL of the following:
   (a) magnesia content NOT less than 90%;
   (b) water content greater than 10% and less than 20%;
   (c) bulk weight greater than 1 500 grams/cubic metre

TUNDISH COATING, REFRACTORY, comprising ALL of the following:
   (a) magnesia (MgO) content NOT less than 50% and NOT greater than
       80%;
   (b) silica (SiO2) content NOT less than 15% and NOT greater than
       36%;
   (c) alumina (Al2O3) content NOT greater than 3.5%;
   (d) chrome (Cr2O3) content NOT greater than 1%;
   (e) dried bulk density NOT greater than 2 000 kg/cubic metre

ALKYLBENZENES, mixed, linear

SUBSEA CONTROL FLUID, water/glycol based

FLUIDS, BRAKE, having a basis of polyglycols

PREPARED CELL CULTURE MEDIA, homogenous powder, chemically 
defined, having ALL of the following:
  (a) l-glutamine;
  (b) yeast extract;
  (c) l-ornithine monohydrochloride;
  (d) putrescine dihydrochloride;
  (e) l-alanyl-l-glutamine;
  (f) hypoxanthine sodium salt;
  (g) thymidine

DIAGNOSTIC AND LABORATORY REAGENT KITS, being ANY of the following:
   (a) microbial binders and antibiotic tracer reagents, with buffers
       and controls, capable of detecting antibiotics in dairy
       products;
   (b) antibiotic susceptibility plates;
   (c) fluorogenic substrate strips for antibiotic susceptibility
       testing applications

DIAGNOSTIC REAGENT PAPERS, being ANY of the following:
   (a) anaerobic indicator strips;
   (b) an-indent discs;
   (c) bacitracin discs;
   (d) metronidazole diagnostic discs;
   (e) 0129 diagnostic discs;
   (f) optochin diagnostic discs;
   (g) sulphnamide diagnostic discs;
   (h) antimicrobial (antibiotic) susceptibility discs;
   (i) beta-lactamase detection papers

TEST STRIPS, GLUTARALDEHYDE SOLUTION

TEST STRIPS, SWIMMING POOL AND SPA WATER, comprising reagent pads
 mounted on plastic strip

DIAGNOSTIC TEST STRIPS, URINARY ANALYSIS, including BOTH of the 
following:
  (a) plastic backing;
  (b) reagent pad, including ANY of the following:
          (i) protein detector;
         (ii) blood detector;
        (iii) leukocyte detector;
         (iv) nitrite detector;
          (v) glucose detector;
         (vi) ketone detector;
        (vii) acidity detector;
       (viii) specific gravity detector;
         (ix) bilirubin detector;
          (x) urobilinogen detector

12-HYDROXYSTEARIC ACID

MICROSILICA SLURRY CEMENT BONDING ADDITIVE

CEMENTING ADDITIVES, powder form, having a polymer base

DISPERSANTS, CEMENTING ADDITIVE, powder form, having polymer base

LIQUID DISPERSANTS, having a basis of sulphonated synthetic 
amine polymer

CEMENT ADDITIVES, SPACER FLUID, OIL FIELD, polymer-based

SOLUBLE POWDERS, SHOTCRETE SETTING ACCELERATOR, having a 
composition of NOT less than 60% aluminium hydroxide sulphate

SOLUTIONS, CONCRETE SURFACE RETARDER

ADDITIVES, CEMENT, being anti-foaming agents

OIL WELL CEMENT FLUID LOSS ADDITIVE

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing fully halogenated chlorofluro carbons

BLENDS, hydrofluorocarbon (HFC)

REFRIGERANT, being an azeotropic mixture of BOTH of the following:
   (a) 50% pentafluoroethane (HFC-125);
   (b) 50% trifluoroethane (HFC-143a)

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing chloro/fluoro carbons

REFRIGERANTS, comprising BOTH the following:
   (a) difluoromethane (HFC-32);
   (b) pentafluoroethane (HFC-125)

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing fully halogenated chlorofluro carbons

DEFOAMERS, liquid, having a basis of polymer with oxirane

CHLOROPARAFFINS, having a chlorine content exceeding 60%

ELECTROLYTE, VANADIUM REDOX FLOW BATTERY

CORROSION INHIBITORS, amine-based, water soluble

DEFOAMERS, liquid, having a basis of polyol glycol AND silicone 
oils

HEAT TRANSFER FLUID, having a base of hydrogenated terphenyl

WELLBORE STABILISER, filtrate loss additive, cellulosic-based, 
having NOT greater than 10 per cent of pre-gelatinised starch

BITUMEN STABILISER, polymer modified, in granular form, having a 
basis of sulphur

ANTI-SCALANTS, liquid, including BOTH of the following:
  (a) acrylate polymer NOT greater than 20 %;
  (b) salt of carboxylic acid derivative NOT less than 10 % and
      NOT greater than 30 %

DEFOAMING AGENTS, being a mixture of oxygenated hydrocarbons, 
having a basis of aliphatic ethers AND/OR alcohols

EMULSIFIERS AND/OR LUBRICANTS, liquid form, having an active 
ingredient of sorbitan monolaurate

FROTHERS, having BOTH of the following:
  (a) hydrocarbon content NOT less than C8;
  (b) 2-ethylhexanol

PRECURSORS, CHLORINE DIOXIDE, having ALL of the following:
  (a) sodium chlorate;
  (b) hydrogen peroxide;
  (c) water

PASSIVATION SOLUTION, including ALL of the following:
  (a) chromium III hydroxynitrate content NOT less than 10% and
      NOT greater than 25%;
  (b) chromium tris dihydrogen phosphate content NOT less than
      1.0% and NOT greater than 5%;
  (c) phosphoric acid content not greater than 5%;
  (d) hexavalent chromium CrVI content NOT greater than 0.1%

DRILLING FLUID ADDITIVE, having a basis of ammonium persulfate 
AND crystalline silica

FLUID LOSS ADDITIVE, having a basis of a co-polymeric blend of 
acrylate monomer AND silica gel

SHALE INHIBITOR. amine based

GRANULES, MERCURY REMOVAL, HYDROCARBON PURIFICATION

HARDENING AND/OR CURING AGENT, having a benzyl alcohol content 
NOT greater than 15 per cent

EMULSIFIERS, EMULSION EXPLOSIVES, having a basis of sorbitan 
mono oleate

ANTI-CAKING ADDITIVE, GRANULATED FERTILISER, having an oil 
AND/OR 
petroleum base

HYDROLYSED MARINE CARTILAGE POWDER, having ALL of the following: 
  (a) protein content by weight NOT less than 50%;
  (b) chondroitin sulphate by weight NOT less than 40%

METHACRYLIC ACID AND ESTERS OF METHACRYLIC ACID, mixed,  
whether or not containing water

SORGHUM SEED SAFENER, having a basis of oxabetrinil

POLYPROPYLENE GLYCOL 2 MYRISTYL ETHER PROPIONATE, ester of
 propionic acid and the polypropylene glycol ether of myristyl
 alcohol

RESIN, 3D PRINTER, ultraviolet curable, in liquid form

SYNTHETIC PHEROMONE, in liquid form

SOLUTIONS, ANTICOAGULANT ACID CITRATE DEXTROSE (ACD-A)

BEADS, DESICCANT, including BOTH of the following:
  (a) silica gel impregnated with a coloured organic moisture 
      absorption indicator;
  (b) zeolite mixed with a clay binder

2-METHYL-2-PROPENOIC ACID SOLUTIONS, fluorinated monomer, having 
composition of NOT less than 70% hydrocarbon solvent

BLANKETS, incorporating heat pads

GRANULES, SULPHUR ABSORPTION, having ALL of the following:
  (a) basic copper carbonate content NOT less than 70% and NOT 
      greater than 75%;
  (b) basic zinc carbonate content NOT less than 10% and NOT 
      greater than 15%;
  (c) calcium aluminate content NOT greater than 10%;
  (d) attapulgite clay content NOT greater than 10%

ESTERS OF METHACRYLIC ACID, mixed

BLEACH ACTIVATORS, DETERGENT, granules, having a basis of tetra 
acetyl ethylene diamine

PHOSPHONOCARBOXYLIC ACID (PCA) TELOMERS AND COTELOMERS

LIGHT STICKS, chemiluminescent

SULPHUR ABSORBENTS, promoted, zinc oxide based

ALUMINIUM PASTE, consisting of BOTH of the following:
  (a) aluminium flakes;
  (b) diethylene glycol

GRANULES, having a composition including BOTH of the following:
  (a) NOT less than 35% aluminium hydroxide;
  (b) NOT less than 25% copper sulphide

IMIPROTHRIN NON-AQUEOUS SOLUTION, having NOT less than 49% 
imiprothrin dissolved in isopropyl myristate

SEMEN EXTENDERS, ANIMAL

PEPTISERS, SYNTHETIC RUBBER OR NATURAL RUBBER, including BOTH of 
the following:
  (a) peptising agent;
  (b) processing additive

SACHETS, OXYGEN AND CARBON DIOXIDE ABSORBER

SACHETS, OXYGEN ABSORBER

COATINGS, THERMOPLASTIC RESIN, non-intumescent, having ALL of 
the following:
  (a) density NOT less than 1.35 grams per cubic centimetre and 
      NOT greater than 1.55 grams per cubic centimetre;
  (b) pH value NOT less than 7.7 and NOT greater than 8.7;
  (c) limiting oxygen index NOT less than 95;
  (d) viscosity NOT less than 40 000 mPas and NOT greater than 
      60 000 mPas;
  (e) corrosion inhibitors

DISODIUM 5" RIBONUCLEOTIDE

GELLING AGENT, having a basis of oxyaluminium octoate and isopropyl
 octoate having an aluminium content within the range 8.4% to 8.7%

SILICON DIOXIDE, in ANY of the following forms:
   (a) surface treated;
   (b) in aqueous dispersion;
   (c) in colloidal solution

MERCURY ABSORBING AND/OR ADSORBING GRANULES, having ALL of the 
following:
  (a) copper(II) carbonate-copper(II) hydroxide(1:1) content 
      NOT less than 25% and NOT greater than 35%;
  (b) copper sulphide content NOT less than 20% and NOT greater 
      than 25%;
  (c) aluminium oxide content NOT less than 5% and NOT greater 
      than 10%

MERCURY ABSORBING GRANULES, having BOTH of the following; 
  (a) aluminium hydroxide composition of NOT less than 35% and
      NOT greater than 50%;
  (b) copper sulphide composition NOT less than 25% and NOT 
      greater than 35%

FOOD ADDITIVES, having ALL of the following:
  (a) pentapotassium triphosphate;
  (b) pentasodium triphosphate;
  (c) tetrapotassium diphosphate;
  (d) tetrasodium diphosphate

SOLVENTS, methyldiethanolamine AND piperazine

ABSORBENTS, MERCURY REMOVAL, metal sulphide mixture, in 
spherical granular form, having an aluminium oxide composition 
of NOT less than 5% and NOT greater 10%

EMULSIFIERS, FOOD, being ANY of the following:
  (a) polyglycerol esters;
  (b) polyglycerol polyricinoleates;
  (c) fatty acid propylene glycol mono and diesters;
  (d) sorbitan esters, being mixtures of the partial esters of 
      sorbitol and its mono- and dianhydrides with edible 
      stearic acid;
  (e) sodium or calcium stearoyl lactylates

GRANULES, CARBON DIOXIDE ABSORBENT, having NOT less than 
70% calcium hydroxide

EMULSIFIERS, FOOD, based on monoglycerides OR mono-diglycerides 
of vegetable fatty acids esterified with ANY of the following:
  (a) acetic acids;
  (b) citric acids;
  (c) diacetyl tartaric acids;
  (d) lactic acids

EMULSIFIERS, FOOD, sodium stearoyl lactylate

EMULSIFIERS, FOOD, based on vegetable oils comprising 
monoglycerides AND/OR diglycerides AND/OR triglycerides

FROTHERS, ORE PROCESSING, containing an alcohol blend

EMULSIFIERS, FOOD, based on vegetable oils comprising 
monoglycerides AND triglycerides

EMULSIFIERS, FOOD, having a basis of diacetyl tartaric acid 
esters comprising monoglycerides AND diglycerides

MAGNETIC POWDER, CLUTCH OR BRAKE

BINDERS, REFRACTORY, having ALL of the following:
  (a) phenolic resin content NOT less 20% but NOT greater than 
      70%;
  (b) triethylene glycol content NOT less than 20% but NOT
      greater than 70%; 
  (c) glycerin content NOT greater than 20%;
  (d) phenol content NOT greater than 15%

COUPLING AGENTS, containing NOT less than 35% organosilane

PASTES, conductor, resistor or dielectric

INVITRO PRESERVATION POWDERS, BOARS" SEMEN, buffered, but NOT
 containing ANY animal semen

ORGANO TITANIUM COMPOUNDS, in solution form, being ANY of the
 following:
   (a) polybutyl titanate;
   (b) complex alkanolamine titanate;
   (c) tetrakis (2-ethylhexyl) titanate;
   (d) titanium bis (2,4 pentanedionate) ethoxy isopropoxide;
   (e) titanium bis (triethanolamine) diisopropoxide;
   (f) tetra-n-butyl titanate;
   (g) titanium chelate (polytitanium phosphate)

MELTING FLUX

HEAT PADS, disposable

PRESERVATIVE, CERVICAL CELL SAMPLE, having ALL of the following:
   (a) methanol based;
   (b) ethylenediaminetetraacetic acid (EDTA) haemelytic agent;
   (c) buffered with salts

INVITRO PRESERVATIVE SOLUTION, BUFFERED, CYTOLOGY CELL COLLECTION
 PREPARATION INSTRUMENT, methanol based

BLOWING AGENTS, having a basis of azodicarbonic acid diamide

MATTING AGENTS, POWDER COATING, based on EITHER of the following:
   (a) polyolefin wax and organo zinc compounds;
   (b) polyester resin and organo zinc compounds

PREPARATIONS, DENTAL CERAMIC

SIEVES, MOLECULAR, crystalline metal aluminosilicates with a
 three-dimensional interconnecting network structure of silica
 and alumina tetrahedra

POLYAMINOAMIDE RESIN

CALIBRATOR SOLUTION AND CALIBRATION STANDARDS

LABORATORY STANDARDS AND BUFFERS for glucose/lactate analysers

GLYCEROL MONOSTEARATE, with a minimum monoglyceride content of 90%

FILTER POWDER, having an assay of 15% magnesium oxide,
 67% silicon dioxide

CYCLOSILOXANES, being mixtures containing EITHER of the following:
   (a) octamethyl - cyclotetrasiloxane;
   (b) decamethyl - cyclopentasiloxane

PREPARATIONS, ultraviolet light absorbing, consisting of
 concentrated blends of ultraviolet light stabilisers and/or
 absorbers, but excluding pigment and plastic preparations

CAPRYLIC/CAPRIC TRIGLYCERIDE, mixed triester of glycerine
 and caprylic and capric acids

DENATONIUM BENZOATE, in solution forms

POLYOXYPROPYLENE DIAMINE

CORRECTING ROLLERS, including refill cassettes

ETHYLENEAMINES, being ANY of the following:
   (a) containing both cycle ethyleneamines and linear
       ethyleneamines but primarily composed of amino ethyl
       piperazine and triethylene tetramine;
   (b) diethylenetriamine - Commercial or HP Grade;
   (c) triethylenetetramine;
   (d) tetraethylenepentamine

BENZENESULPHONAMIDE, N-PHENYL-N (TRICHLOROMETHYLTHIO)

PIGMENT DISPERSING AGENT, being a synthetic phosphorylated polyene,
 having the following property specifications:
   (a) color, Gardner, 1963 - 7 max;
   (b) acid value - 170-210;
   (c) non - volatiles % - 93 min;
   (d) specific gravity, 25 degrees/25 degrees C - 1.04 min

SODIUM METHYLATE 30% solution

LINEAR ALCOHOL LACTATE

PERBORATE ACTIVATORS, granular, tetra acetyl ethylenediamine
 based, containing EITHER of the following:
   (a) sodium carboxymethylcellulose;
   (b) tallow alkyl polyglycol ether

PROTECTIVE COATING MIXTURE, containing ALL of the following:
   (a) dipropylene glycol;
   (b) zinc flake;
   (c) aluminium paste (A1/DPC=70/30);
   (d) non-ionic surface active agent

SEALANTS, non-flammable, non-explosive, based on organic esters and
 containing no acrylamide monomers

FLAME RETARDANTS, BROMINATED

CORRECTING ROLLERS, including refills, refill tapes on plastic
 spools being parts for correcting rollers

DIMER ACIDS

ISOCYANATES, including solutions

CURING AGENTS, epoxy resin, having a basis of modified anhydride

CURING AGENTS, epoxy resin, having a basis of imidazole

SURFACE ACTIVE AGENTS, being derivatives of chromophores

LANOLIN, ALCOHOLS, acetylated

METHYLENE DIPHENYL 4, 4" Diisocyanate (MDI) in admixtures with its
 isomers and higher homologues, but NOT being addition products of
 polyols with isocyanates containing unreacted hydroxyl or
 isocyanate groups

FATTY AMINES

CURING AGENTS, epoxy, being reaction products of a phenol,
 formaldehyde and amines

MALEIC ANHYDRIDE TELOMER OR COTELOMER HYDROLYSATES

DEMOLITION AGENTS, non-explosive, based on a mixture of calcium
 silicate, calcium aluminates and calcium oxide

CURING AGENTS, epoxy, having a basis of aromatic diamines

POWDERS, anti-offset, silicon coated, formulated to prevent wet
 ink offsetting in stacked printed paper

SODA LIME

FILLERS, dental composite, strontium glass

MAGNESIUM STEARATE B.P.

ALUMINA AND POTASSIUM PERMANGANATE COMBINED, activated

CURING AGENTS, epoxy, having a basis of cycloaliphatic diamines

ETHYL SILICATES

PHOSPHORIC ESTERS, mixed, their salts or their halogenated
 derivatives

PADS, defibrillator

REAGENTS, flotation, based on one or more of the following:
   (a) dithiophosphate;
   (b) thionocarbamate;
   (c) phosphorodithiote;
   (d) aryl phosphorodithioate;
   (e) aryl dithiophosphoric acid;
   (f) thiourea

SIEVES, molecular, being zeolite materials

CURING AGENT, epoxy powder coating having a basis of solid
 condensates of bisphenol A and diglycidyl ether of bisphenol A

CHEWING GUM BASE

AMINES, aliphatic, containing 8 or more carbon atoms

ALKYL (C 10-C 18) DERIVATIVES of alkylene diamines

HAND GRIP PREPARATIONS, formulated to decrease hand slip

ION EXCHANGE COMPOUNDS, liquid

CORRECTION FLUIDS

LABORATORY CHEMICAL STANDARDS, CHROMATOGRAPHY, in pack sizes
 NOT exceeding 10 g or 10 mL of active ingredient

LANOLIN DERIVATIVES, being ANY of the following:
   (a) lanolin, acetylated;
   (b) lanolin alcohols, propoxylated

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing fully halogenated chlorofluro carbons

REFRIGERANT, being an azeotropic mixture of BOTH of the following:
   (a) 50% pentafluoroethane (HFC-125);
   (b) 50% trifluoroethane (HFC-143a)

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing chloro/fluoro carbons

REFRIGERANTS, being blends of three refrigerant gases but NOT
 including blends containing fully halogenated chlorofluro carbons