Current tariff classification

Schedule 3 - Section XV

Section XV - Base metals and articles of base metal

Chapter 73 - Articles of iron or steel

Notes

Notes.

In this Chapter "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to Chapter 72.
In this Chapter "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional Notes

In 7313.00.00, "twisted hoop" includes barbed obstacle tape, which may be presented in coils and/or in diamond concertina pattern.
Heading 7308 does not include:

plates, rods, angles, shapes, sections, tubes, pipes and the like, requiring further modification before use in structures, including, but not limited to, cutting, drilling and bending; or
tubes, pipes and the like prepared for the conveyance of fluids (including water, oil and gas).

7301: Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
7302: Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails
7303: Tubes, pipes and hollow profiles, of cast iron
7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
7305: Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross- sections, the external diameter of which exceeds 406.4 mm, of iron or steel
7306: Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
7307: Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
7308: Structures (excluding prefabricated buildings of 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
7309: Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 L, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7310: Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 L, whether or not lined or heat- insulated, but not fitted with mechanical or thermal equipment
7311: Containers for compressed or liquefied gas, of iron or steel
7312: Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
7313: Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
7314: Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
7315: Chain and parts thereof, of iron or steel
7316: Anchors, grapnels and parts thereof, of iron or steel
7317: Nails, tacks, drawing pins, corrugated nails, staples (other than those of 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
7318: Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel
7319: Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
7320: Springs and leaves for springs, of iron or steel
7321: Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel
7322: Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
7323: Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
7324: Sanitary ware and parts thereof, of iron or steel
7325: Other cast articles of iron or steel
7326: Other articles of iron or steel

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7301			SHEET PILING OF IRON OR STEEL, WHETHER OR NOT DRILLED, PUNCHED OR MADE FROM ASSEMBLED ELEMENTS; WELDED ANGLES, SHAPES AND SECTIONS, OF IRON OR STEEL:
7301.10.00	01	t	- Sheet piling	5% DCS:Free	View TCOs for 7301.10.00
7301.20.00	02	..	- Angles, shapes and sections	5% DCS:4% DCT:5%	View TCOs for 7301.20.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7302			RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES, SLEEPERS (CROSS-TIES), FISH-PLATES, CHAIRS, CHAIR WEDGES, SOLE PLATES (BASE PLATES), RAIL CLIPS, BEDPLATES, TIES AND OTHER MATERIAL SPECIALIZED FOR JOINTING OR FIXING RAILS:
7302.10.00	03	t	- Rails	5% DCS:Free	View TCOs for 7302.10.00 View TCOs for 7302.10
7302.30.00	05	t	- Switch blades, crossing frogs, point rods and other crossing pieces	5% DCS:Free	View TCOs for 7302.30.00
7302.40.00	06	t	- Fish-plates and sole plates	5% DCS:Free	View TCOs for 7302.40.00
7302.90.00	48	t	- Other	5% DCS:Free	View TCOs for 7302.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7303.00.00	43	t	TUBES, PIPES AND HOLLOW PROFILES, OF CAST IRON	5% DCS:Free	View TCOs for 7303.00.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7304			TUBES, PIPES AND HOLLOW PROFILES, SEAMLESS, OF IRON (OTHER THAN CAST IRON) OR STEEL:
7304.1			- Line pipe of a kind used for oil or gas pipelines:
7304.11.00	30	t	-- Of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7304.11.00
7304.19.00	31	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7304.19.00
7304.2			- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22.00	30	t	-- Drill pipe of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7304.22.00
7304.23.00			-- Other drill pipe	5% DCS:4% DCT:5%	View TCOs for 7304.23.00
			Of iron or non-alloy steel:
	36	t	.Not exceeding 88.9 mm external diameter
	41	t	.Exceeding 88.9 mm external diameter
	39	t	Other
7304.24.00	50	t	-- Other, of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7304.24.00
7304.29.00			-- Other	5% DCS:4% DCT:5%	View TCOs for 7304.29.00 View TCOs for 7304.29
			Of iron or non-alloy steel:
	54	t	.Not exceeding 88.9 mm external diameter
	55	t	.Exceeding 88.9 mm but not exceeding 165.1 mm external diameter
	56	t	.Exceeding 165.1 mm external diameter
	57	t	Other
7304.3			- Other, of circular cross-section, of iron or non-alloy steel:
7304.31.00			-- Cold-drawn or cold-rolled (cold-reduced)	5% DCS:4% DCT:5%	View TCOs for 7304.31.00 View TCOs for 7304.31
	59	t	Not exceeding 88.9 mm external diameter
	47	t	Exceeding 88.9 mm external diameter
7304.39.00			-- Other	5% DCS:4% DCT:5%	View TCOs for 7304.39.00 View TCOs for 7304.39
	23	t	Not exceeding 88.9 mm external diameter
	26	t	Exceeding 88.9 mm but not exceeding 406.4 mm external diameter
	27	t	Exceeding 406.4 mm external diameter
7304.4			- Other, of circular cross-section, of stainless steel:
7304.41.00	28	t	-- Cold-drawn or cold-rolled (cold-reduced)	5% DCS:4% DCT:5%	View TCOs for 7304.41.00 View TCOs for 7304.41
7304.49.00	29	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7304.49.00 View TCOs for 7304.49
7304.5			- Other, of circular cross-section, of other alloy steel:
7304.51.00	30	t	-- Cold-drawn or cold-rolled (cold-reduced)	5% DCS:4% DCT:5%	View TCOs for 7304.51.00 View TCOs for 7304.51
7304.59.00	31	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7304.59.00 View TCOs for 7304.59
7304.90.00			- Other	5% DCS:4% DCT:5%	View TCOs for 7304.90.00
	33	t	Culverts
	34	t	Other

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7305			OTHER TUBES AND PIPES (FOR EXAMPLE, WELDED, RIVETED OR SIMILARLY CLOSED), HAVING CIRCULAR CROSS-SECTIONS, THE EXTERNAL DIAMETER OF WHICH EXCEEDS 406.4 mm, OF IRON OR STEEL:
7305.1			- Line pipe of a kind used for oil or gas pipelines:
7305.11.00	01	t	-- Longitudinally submerged arc welded	5% DCS:4% DCT:5%	View TCOs for 7305.11.00
7305.12.00			-- Other, longitudinally welded	5% DCS:4% DCT:5%	View TCOs for 7305.12.00
			Of iron or non-alloy steel:
	02	t	.Not exceeding 508 mm external diameter
	03	t	.Exceeding 508 mm external diameter
	04	t	Other
7305.19.00	38	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7305.19.00
7305.20.00	52	t	- Casing of a kind used in drilling for oil or gas	5% DCS:4% DCT:5%	View TCOs for 7305.20.00
7305.3			- Other, welded:
7305.31.00			-- Longitudinally welded	5% DCS:4% DCT:5%	View TCOs for 7305.31.00 View TCOs for 7305.31
	74	t	Of iron or non-alloy steel
	13	t	Other
7305.39.00	39	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7305.39.00
7305.90.00	17	t	- Other	5% DCS:4% DCT:5%	View TCOs for 7305.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7306			OTHER TUBES, PIPES AND HOLLOW PROFILES (FOR EXAMPLE, OPEN SEAM OR WELDED, RIVETED OR SIMILARLY CLOSED), OF IRON OR STEEL:
7306.1			- Line pipe of a kind used for oil or gas pipelines:
7306.11.00	23	t	-- Welded, of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7306.11.00
7306.19.00			-- Other	5% DCS:4% DCT:5%	View TCOs for 7306.19.00
			Welded, of iron or non-alloy steel:
	44	t	.Not exceeding 88.9 mm external diameter
	45	t	.Exceeding 88.9 mm but not exceeding 165.1 mm external diameter
	46	t	.Exceeding 165.1 mm external diameter
	47	t	Other
7306.2			- Casing and tubing of a kind used in drilling for oil or gas:
7306.21.00	48	t	-- Welded, of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7306.21.00
7306.29.00	49	t	-- Other	5% DCS:4% DCT:5%	View TCOs for 7306.29.00
7306.30.00			- Other, welded, of circular cross-section, of iron or non-alloy steel	5% DCS:4% DCT:5%	View TCOs for 7306.30.00 View TCOs for 7306.30
	30	t	Not exceeding 21 mm external diameter
			Exceeding 21 mm but not exceeding 60.3 mm external diameter:
	31	t	.Wall thickness not exceeding 2.5 mm
	32	t	.Wall thickness exceeding 2.5 mm but not exceeding 3.6 mm
	33	t	.Wall thickness exceeding 3.6 mm
			Exceeding 60.3 mm but not exceeding 114.3 mm external diameter:
	34	t	.Wall thickness not exceeding 3.2 mm
	35	t	.Wall thickness exceeding 3.2 mm but not exceeding 4.5 mm
	36	t	.Wall thickness exceeding 4.5 mm
	37	t	Exceeding 114.3 mm but not exceeding 165.1 mm external diameter
	29	t	Exceeding 165.1 mm external diameter
7306.40.00	01	t	- Other, welded, of circular cross-section, of stainless steel	5% DCS:4% DCT:5%	View TCOs for 7306.40.00 View TCOs for 7306.40
7306.50.00	45	t	- Other, welded, of circular cross-section, of other alloy steel	5% DCS:4% DCT:5%	View TCOs for 7306.50.00
7306.6			- Other, welded, of non-circular cross-section:
7306.61.00			-- Of square or rectangular cross-section	5% DCS:4% DCT:5%	View TCOs for 7306.61.00
			Of iron or non-alloy steel:
			.Not exceeding 279.4 mm perimeter:
	21	t	..Wall thickness not exceeding 2 mm
	22	t	..Wall thickness exceeding 2 mm
	25	t	.Exceeding 279.4 mm perimeter
	90	t	Other
7306.69.00	10	t	-- Of other non-circular cross-section	5% DCS:4% DCT:5%	View TCOs for 7306.69.00
7306.90.00	12	t	- Other	5% DCS:4% DCT:5%	View TCOs for 7306.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7307			TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES), OF IRON OR STEEL:
7307.1			- Cast fittings:
7307.11.00	13	No	-- Of non-malleable cast iron	5% DCS:4% DCT:5%	View TCOs for 7307.11.00
7307.19.00			-- Other	5% DCS:4% DCT:5%	View TCOs for 7307.19.00 View TCOs for 7307.19
	47	No	Of malleable cast iron
	48	No	Of cast steel
7307.2			- Other, of stainless steel:
7307.21.00	17	No	-- Flanges	5% DCS:4% DCT:5%	View TCOs for 7307.21.00
7307.22.00	55	No	-- Threaded elbows, bends and sleeves	5% DCS:4% DCT:5%	View TCOs for 7307.22.00
7307.23.00	20	No	-- Butt welding fittings	5% DCS:4% DCT:5%	View TCOs for 7307.23.00 View TCOs for 7307.23
7307.29.00	49	No	-- Other	5% DCS:4% DCT:5%	View TCOs for 7307.29.00 View TCOs for 7307.29
7307.9			- Other:
7307.91.00	23	No	-- Flanges	5% DCS:4% DCT:5%	View TCOs for 7307.91.00
7307.92.00	50	No	-- Threaded elbows, bends and sleeves	5% DCS:4% DCT:5%	View TCOs for 7307.92.00
7307.93.00	26	t	-- Butt welding fittings	5% DCS:4% DCT:5%	View TCOs for 7307.93.00 View TCOs for 7307.93
7307.99.00	51	..	-- Other	5% DCS:4% DCT:5%	View TCOs for 7307.99.00 View TCOs for 7307.99

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7308			STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, LOCK-GATES, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, SHUTTERS, BALUSTRADES, PILLARS AND COLUMNS), OF IRON OR STEEL; PLATES, RODS, ANGLES, SHAPES, SECTIONS, TUBES AND THE LIKE, PREPARED FOR USE IN STRUCTURES, OF IRON OR STEEL:
7308.10.00	01	..	- Bridges and bridge-sections	5% DCS:4% DCT:5%	View TCOs for 7308.10.00
7308.20.00			- Towers and lattice masts	5% DCS:4% DCT:5%	View TCOs for 7308.20.00
	03	t	Tubular, whether or not tapered
	04	t	Other
7308.30.00			- Doors, windows and their frames and thresholds for doors	5% DCS:4% DCT:5%	View TCOs for 7308.30.00
	04	t	Of stainless steel
			Other
	05	t	.Windows and their frames
	06	t	.Thresholds for doors
	07	t	.Other
7308.40.00	05	t	- Equipment for scaffolding, shuttering, propping or pit-propping	5% DCS:4% DCT:5%	View TCOs for 7308.40.00
7308.90.00			- Other	5% DCS:4% DCT:5%	View TCOs for 7308.90.00 View TCOs for 7308.90
			Columns, pillars, posts and beams, girders, bracing, gantries, brackets, struts, ties and similar structural units:
			.Roll formed structures:
	52	t	..Hot rolled
	53	t	..Plated or coated with zinc or with aluminium-zinc alloys, of a thickness less than 1.2 mm
	54	t	..Plated or coated with zinc or with aluminium-zinc alloys, of a thickness of 1.2 mm or more
	55	t	..Other
	56	t	.Other
	57	t	Steel grating, stairways and treads
	58	t	Racking and shelving
	59	t	Sheet-metal roofing, siding, flooring and roof drainage equipment (or rainwater goods)
	60	t	Handrails and stanchions
	62	t	Guard rails and road barriers, prepared for use on bridges and roads
	63	t	Sectional components, prepared for use in towers and lattice masts
	64	t	Lintels, prepared for use with doors and windows
	65	t	Other

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7309.00.00	07	No	RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF IRON OR STEEL, OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT	5%	View TCOs for 7309.00.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7310			TANKS, CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF IRON OR STEEL, OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT:
7310.10.00	08	No	- Of a capacity of 50 L or more	5% DCS:4% DCT:5%	View TCOs for 7310.10.00
7310.2			- Of a capacity of less than 50 L:
7310.21.00	50	No	-- Cans which are to be closed by soldering or crimping	5% DCS:4% DCT:5%	View TCOs for 7310.21.00
7310.29.00	10	No	-- Other	5% DCS:4% DCT:5%	View TCOs for 7310.29.00 View TCOs for 7310.29

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7311.00.00			CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS, OF IRON OR STEEL	5%	View TCOs for 7311.00.00 View TCOs for 7311.00
	12	No	Cryogenic
			Seamless:
	13	No	.Not exceeding 15 kg water capacity
	14	No	.Exceeding 15 kg water capacity
			Other:
	15	No	.Not exceeding 5 kg water capacity
	16	No	.Exceeding 5 kg but not exceeding 15 kg water capacity
	19	No	.Exceeding 15 kg water capacity

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7312			STRANDED WIRE, ROPES, CABLES, PLAITED BANDS, SLINGS AND THE LIKE, OF IRON OR STEEL, NOT ELECTRICALLY INSULATED:
7312.10.00			- Stranded wire, ropes and cables	5%	View TCOs for 7312.10.00 View TCOs for 7312.10
	75	kg	Brass coated steel cordage for reinforcing rubber tyres
			Other
	76	kg	.Of stainless steel
			.Other
			..Stress-relived steel wire strand (for example prestressed concrete strand or low-relaxation strand), of alloy or non-alloy steel
	80	kg	...Of a diameter not exceeding 18 mm, containing not more than seven strands
	81	kg	...Other
			..Ropes and cables, containing not more than eight strands, of alloy or non-alloy steel
	90	kg	...Of a diameter not exceeding 50 mm
	91	kg	...Of a diameter exceeding 50 mm but not exceeding 100 mm
	92	kg	...Of a diameter exceeding 100 mm
	93	kg	.. Ropes and cables containing more than eight strands, of alloy or non-alloy steel
	94	kg	..Other
7312.90.00			- Other	5%	View TCOs for 7312.90.00
	40	kg	Slings
	41	kg	Other

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7313.00.00	51	t	BARBED WIRE OF IRON OR STEEL; TWISTED HOOP OR SINGLE FLAT WIRE, BARBED OR NOT, AND LOOSELY TWISTED DOUBLE WIRE, OF A KIND USED FOR FENCING, OF IRON OR STEEL	Free	View TCOs for 7313.00.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7314			CLOTH (INCLUDING ENDLESS BANDS), GRILL, NETTING AND FENCING OF IRON OR STEEL WIRE; EXPANDED METAL OF IRON OR STEEL:
7314.1			- Woven cloth:
7314.12.00	31	sm	-- Endless bands for machinery, of stainless steel	5%	View TCOs for 7314.12.00
7314.14.00	33	sm	-- Other woven cloth, of stainless steel	5%	View TCOs for 7314.14.00 View TCOs for 7314.14
7314.19.00	35	sm	-- Other	Free	View TCOs for 7314.19.00
7314.20.00	24	t	- Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more	Free	View TCOs for 7314.20.00
7314.3			- Other grill, netting and fencing, welded at the intersection:
7314.31.00	37	t	-- Plated or coated with zinc	Free	View TCOs for 7314.31.00
7314.39.00	38	t	-- Other	Free	View TCOs for 7314.39.00
7314.4			- Other cloth, grill, netting and fencing:
7314.41.00	26	t	-- Plated or coated with zinc	Free	View TCOs for 7314.41.00
7314.42.00	27	t	-- Coated with plastics	Free	View TCOs for 7314.42.00
7314.49.00	28	t	-- Other	Free	View TCOs for 7314.49.00
7314.50.00	29	t	- Expanded metal	5%	View TCOs for 7314.50.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7315			CHAIN AND PARTS THEREOF, OF IRON OR STEEL:
7315.1			- Articulated link chain and parts thereof:
7315.11.00			-- Roller chain	5%	View TCOs for 7315.11.00 View TCOs for 7315.11
	01	kg	Pitch not exceeding 25.4 mm
	02	kg	Pitch exceeding 25.4 mm but not exceeding 76.2 mm
	03	kg	Pitch exceeding 76.2 mm
7315.12.00	04	kg	-- Other chain	5%	View TCOs for 7315.12.00 View TCOs for 7315.12
7315.19.00	05	kg	-- Parts	5%	View TCOs for 7315.19.00 View TCOs for 7315.19
7315.20.00	06	kg	- Skid chain	Free	View TCOs for 7315.20.00
7315.8			- Other chain:
7315.81.00	07	kg	-- Stud-link	Free	View TCOs for 7315.81.00
7315.82.00			-- Other, welded link	5%	View TCOs for 7315.82.00 View TCOs for 7315.82
	08	kg	Not exceeding 13 mm in diameter
	09	kg	Exceeding 13 mm but not exceeding 26 mm in diameter
	10	kg	Exceeding 26 mm in diameter
7315.89.00	11	kg	-- Other	5%	View TCOs for 7315.89.00
7315.90.00	12	kg	- Other parts	5%	View TCOs for 7315.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7316.00.00	13	..	ANCHORS, GRAPNELS AND PARTS THEREOF, OF IRON OR STEEL	5%	View TCOs for 7316.00.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7317			NAILS, TACKS, DRAWING PINS, CORRUGATED NAILS, STAPLES (OTHER THAN THOSE OF 8305) AND SIMILAR ARTICLES, OF IRON OR STEEL, WHETHER OR NOT WITH HEADS OF OTHER MATERIAL, BUT EXCLUDING SUCH ARTICLES WITH HEADS OF COPPER:
7317.00.10	14	kg	--- Horse-shoe nails	Free	View TCOs for 7317.00.10 View TCOs for 7317.00
7317.00.90			--- Other	5%	View TCOs for 7317.00.90
			Nails:
	45	kg	.Collated or for collation
	42	kg	.Other
	43	kg	Other

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7318			SCREWS, BOLTS, NUTS, COACH SCREWS, SCREW HOOKS, RIVETS, COTTERS, COTTER- PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF IRON OR STEEL:
7318.1			- Threaded articles:
7318.11.00	18	No	-- Coach screws	5%	View TCOs for 7318.11.00
7318.12.00			-- Other wood screws	5%	View TCOs for 7318.12.00
	19	No	Not exceeding 6 gauge
	20	No	Exceeding 6 gauge
7318.13.00	21	No	-- Screw hooks and screw rings	Free	View TCOs for 7318.13.00
7318.14.00	23	No	-- Self-tapping screws	5%	View TCOs for 7318.14.00
7318.15.00			-- Other screws and bolts, whether or not with their nuts or washers	5%	View TCOs for 7318.15.00 View TCOs for 7318.15
			Bolts (including bolt ends and screw studs):
	56	No	.Expansion bolts, U-bolts and shackle bolts
			.Other, with or without nuts and/or washers:
	57	No	..Cup square
			..Hexagonal head (excluding high tensile):
	58	No	...Not exceeding 10 mm in diameter
	59	No	...Exceeding 10 mm but not exceeding 20 mm in diameter
	60	No	...Exceeding 20 mm in diameter
			..Other:
			...High tensile:
	51	No	....Not exceeding 20 mm in diameter
	62	No	....Exceeding 20 mm in diameter
			...Other:
	63	No	....Not exceeding 5 mm in diameter
	64	No	....Exceeding 5 mm but not exceeding 10 mm in diameter
	65	No	....Exceeding 10 mm in diameter
	66	No	Masonry anchors
			Screws:
			.Not suitable for use with nuts:
	52	No	..Stainless
	68	No	..Other
			.Suitable for use with nuts:
	69	No	..Engineers' set screws
			..Other:
	70	No	...Machine
	71	No	...Socket head
	90	No	...Other
7318.16.00			-- Nuts	5%	View TCOs for 7318.16.00 View TCOs for 7318.16
	11	No	Hexagonal
	12	No	Other
7318.19.00	19	..	-- Other	5%	View TCOs for 7318.19.00
7318.2			- Non-threaded articles:
7318.21.00	04	No	-- Spring washers and other lock washers	5%	View TCOs for 7318.21.00 View TCOs for 7318.21
7318.22.00	21	No	-- Other washers	5%	View TCOs for 7318.22.00 View TCOs for 7318.22
7318.23.00	06	No	-- Rivets	5%	View TCOs for 7318.23.00 View TCOs for 7318.23
7318.24.00	22	No	-- Cotters and cotter-pins	5%	View TCOs for 7318.24.00 View TCOs for 7318.24
7318.29.00	29	..	-- Other	5%	View TCOs for 7318.29.00 View TCOs for 7318.29

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7319			SEWING NEEDLES, KNITTING NEEDLES, BODKINS, CROCHET HOOKS, EMBROIDERY STILETTOS AND SIMILAR ARTICLES, FOR USE IN THE HAND, OF IRON OR STEEL; SAFETY PINS AND OTHER PINS OF IRON OR STEEL, NOT ELSEWHERE SPECIFIED OR INCLUDED:
7319.40.00	15	..	- Safety pins and other pins	Free	View TCOs for 7319.40.00
7319.90.00	18	..	- Other	Free	View TCOs for 7319.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7320			SPRINGS AND LEAVES FOR SPRINGS, OF IRON OR STEEL:
7320.10.00	41	No	- Leaf-springs and leaves therefor	5%	View TCOs for 7320.10.00
7320.20.00	42	No	- Helical springs	5%	View TCOs for 7320.20.00 View TCOs for 7320.20
7320.90.00			- Other	5%	View TCOs for 7320.90.00 View TCOs for 7320.90
	76	No	For use in vehicles
	23	No	Other

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7321			STOVES, RANGES, GRATES, COOKERS (INCLUDING THOSE WITH SUBSIDIARY BOILERS FOR CENTRAL HEATING), BARBECUES, BRAZIERS, GAS-RINGS, PLATE WARMERS AND SIMILAR NON-ELECTRIC DOMESTIC APPLIANCES, AND PARTS THEREOF, OF IRON OR STEEL:
7321.1			- Cooking appliances and plate warmers:
7321.11.00			-- For gas fuel or for both gas and other fuels	5%	View TCOs for 7321.11.00
			Non-portable, domestic use only, 2 burners or more, the total input capacity of which exceeds 5 MJ:
	20	No	.Cooking tops
	21	No	.Ovens
	23	No	.Other, including ranges
	59	No	Other
7321.12.00	05	No	-- For liquid fuel	5%	View TCOs for 7321.12.00 View TCOs for 7321.12
7321.19.00	28	No	-- Other, including appliances for solid fuel	5%	View TCOs for 7321.19.00
7321.8			- Other appliances:
7321.81.00	08	No	-- For gas fuel or for both gas and other fuels	5%	View TCOs for 7321.81.00
7321.82.00	08	No	-- For liquid fuel	5%	View TCOs for 7321.82.00
7321.89.00	09	No	-- Other, including appliances for solid fuel	5%	View TCOs for 7321.89.00
7321.90.00	10	..	- Parts	5%	View TCOs for 7321.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7322			RADIATORS FOR CENTRAL HEATING, NOT ELECTRICALLY HEATED, AND PARTS THEREOF, OF IRON OR STEEL; AIR HEATERS AND HOT AIR DISTRIBUTORS (INCLUDING DISTRIBUTORS WHICH CAN ALSO DISTRIBUTE FRESH OR CONDITIONED AIR), NOT ELECTRICALLY HEATED, INCORPORATING A MOTOR-DRIVEN FAN OR BLOWER, AND PARTS THEREOF, OF IRON OR STEEL:
7322.1			- Radiators and parts thereof:
7322.11.00	11	No	-- Of cast iron	5%	View TCOs for 7322.11.00
7322.19.00	12	No	-- Other	5%	View TCOs for 7322.19.00
7322.90.00	13	No	- Other	5%	View TCOs for 7322.90.00

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7323			TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF IRON OR STEEL; IRON OR STEEL WOOL; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF IRON OR STEEL:
7323.10.00	14	..	- Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like	5%	View TCOs for 7323.10.00
7323.9			- Other:
7323.91.00	15	No	-- Of cast iron, not enamelled	Free	View TCOs for 7323.91.00
7323.92.00	16	No	-- Of cast iron, enamelled	5%	View TCOs for 7323.92.00
7323.93.00	56	No	-- Of stainless steel	5% CA:Free	View TCOs for 7323.93.00 View TCOs for 7323.93
7323.94.00	18	No	-- Of iron (other than cast iron) or steel, enamelled	5%	View TCOs for 7323.94.00
7323.99.00	54	..	-- Other	5%	View TCOs for 7323.99.00 View TCOs for 7323.99

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7324			SANITARY WARE AND PARTS THEREOF, OF IRON OR STEEL:
7324.10.00			- Sinks and wash basins, of stainless steel	5%	View TCOs for 7324.10.00
	52	No	Sinks
	53	No	Other
7324.2			- Baths:
7324.21.00	21	No	-- Of cast iron, whether or not enamelled	5%	View TCOs for 7324.21.00
7324.29.00	22	No	-- Other	5%	View TCOs for 7324.29.00
7324.90.00	23	..	- Other, including parts	5%	View TCOs for 7324.90.00 View TCOs for 7324.90

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7325			OTHER CAST ARTICLES OF IRON OR STEEL:
7325.10.00	57	..	- Of non-malleable cast iron	5%	View TCOs for 7325.10.00
7325.9			- Other:
7325.91.00	26	t	-- Grinding balls and similar articles for mills	5% DCS:4% DCT:5%	View TCOs for 7325.91.00 View TCOs for 7325.91
7325.99.00	32	..	-- Other	5%	View TCOs for 7325.99.00 View TCOs for 7325.99

Reference Number	Statistical Code	Unit	Goods	Rate#	Tariff concession orders
7326			OTHER ARTICLES OF IRON OR STEEL:
7326.1			- Forged or stamped, but not further worked:
7326.11.00	29	t	-- Grinding balls and similar articles for mills	5% DCS:4% DCT:5%	View TCOs for 7326.11.00 View TCOs for 7326.11
7326.19.00	30	..	-- Other	5%	View TCOs for 7326.19.00 View TCOs for 7326.19
7326.20.00	51	..	- Articles of iron or steel wire	5%	View TCOs for 7326.20.00
7326.90			- Other:		View TCOs for 7326.90
7326.90.10	40	..	--- Of a kind used as components in passenger motor vehicles	5% CA:Free	View TCOs for 7326.90.10
7326.90.90	60	..	--- Other	5% CA:Free	View TCOs for 7326.90.90

Footnote

V.3

S Operative 1/1/22

# Unless otherwise indicated NZ, PG, FI, DC, LDC and SG rates are Free.

The SG rate cannot be used to claim preferential tariff treatment for goods that are the produce or manufacture of Singapore unless the goods were imported before 1 December 2020.

Unless otherwise indicated general rate applies for CA.

Unless indicated in the relevant Schedule, rates for originating goods under a free trade agreement are Free.

DCS denotes the rate for countries and places listed in Part 4 of Schedule 1 to the Customs Tariff Regulations 2004.

DCT denotes the rate for HK, KR, SG and TW.

If no DCT rate shown, DCS rate applies. If no DCT or DCS rate shown, general rate applies.

From 25 April 2022 the amount of duty applied to additional duty goods, in accordance with proposed section 18A of the Customs Tariff Act 1995, is equal to the general rate of duty plus an amount equal to 35% of the value of the goods.

From 4 July 2022, goods of Ukraine, in accordance with proposed section 18B of the Customs Tariff Act 1995, are Free.

Popular searches

Your previous searches

Current tariff classification

Section XV - Base metals and articles of base metal

Chapter 73 - Articles of iron or steel

Notes.

Additional Notes

V.3

Current tariff classification

​Section XV - Base metals and articles of base metal

Chapter 73 - Articles of iron or steel

Notes.

Additional Notes

V.3

Section XV - Base metals and articles of base metal